Used Saw Cold for sale (6,727)

Condition: good (used), MITRE COLD CIRCULAR SAW MACHINE Type: KKS 400 H Year of manufacture: 1982 Equipment: Nsdexnmn Uepfx Ad Nocl - Infeed roller conveyor 1000 mm, left - Outfeed roller conveyor with length stop, 2000 mm, right - Saw blade diameter: 370 mm - Hydraulic clamping cylinder with 8 mm stroke, handwheel for pre-setting - Documentation Condition: good, workshop inspected

Condition: good (used), Year of construction: 1976, functionality: fully functional, Cold circular saw with automatic feeder Nodpfx Adjwtdi Ao Necl Year of manufacture: approx. 1976 Equipment: - Standard accessories - Automatic feeder, cutting length 1700 mm - Various saw blades - Coolant system - Infeed roller conveyor 2400 mm, split (2 x 1200 mm) - Outfeed roller conveyor 500 mm - Documentation Condition: good, workshop tested

Condition: used, Year of construction: 1999, Cold circular saw Manufacturer: Kaltenbach Type: KKS 401 NA Year of manufacture: 1999 Saw blade diameter: 450 mm Ncjdpfx Adeyax Eqs Njl Max. cutting width: 5 mm Saw blade bore diameter: 50 mm Saw blade types: HSS solid steel blade HSS segmental saw blade Vertical vice opening stroke: With aluminum pressure piece (for miter cuts): max. 160 mm With steel pressure piece (for straight cuts): max. 160 mm Rotary table adjustment NC-controlled, stepless +/- 60° With hydraulic motor to stop -45°/0°/+45° Manual, stepless +/-60° Automatic feed Max. stroke: 1,000 mm Programmable length max.: 9,999 mm Conveyable length: depends on discharge-side roller conveyor Max. material width: 240 mm 200126

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz Neded N H A Nepfx Ad Necl - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: as good as new (ex-display), Year of construction: 2018, saw blade diameter: 550,500 mm, Machine in perfect technical condition. Practically very little used. For processing aluminum and PVC profiles. Mitres possible in 3 levels and can be used as a splitting saw, manual adjustment of the horizontal saw blade by a maximum of 20 mm in front of the vertical saw blade. Notch options: rectangular, one-sided diagonal, two-sided diagonal, three-sided diagonal. Processing of profiles up to 300, width up to 90 °, bevels up to 30 °. Notch depth horizontally up to 185 mm, vertically up to 210 mm at an angle of 90 °. Notch width at 90 °: 300 mm, profile height 280 mm Manual adjustment of the notch and height, positioning using mechanical digital displays. Vertical saw blade rotation range 30° – 90° – 30°, (front/middle/back) manual, positioning via digital display. Vertical saw blade rotation range 30° – 90° – 30°, manual, positioning via digital display. The material stop (table top) can be manually rotated left and right within the range of 30° - 90° - 30°, positioning via measuring scale. The material depth stop can be manually adjusted via the sliding carriage and manual clamp, positioning via digital display. Nodpfx Adjvtarnj Necl

Condition: used, functionality: fully functional, very robust gearbox, motor 1.0 / 1.8 kW Saw blades: 360 mm Slow-running model with 6 cutting speeds: 8 / 10 / 12.5 m/min 16 / 20 / 25 m/min Test cutting at our facility with the following specifications: Cutting capacity at 90 degrees with blade size 360 mm: Round profile: 110 mm Solid round material: 80 mm Ncedpfxsyctmhj Ad Nel Flat profile: 200 x 80 mm Weight approx. 560 kg

Condition: used, Year of construction: 1981, turning speeds 40/80 U/min Nsdpfovu Hlkjx Ad Nscl 0025 voltage 380 V clamping ja kW miter ja weight 700 kg

Condition: used, Year of construction: 1989, cutting diameter 260 mm serial number 109967 volt 380 V Nedpfx Aspxri Ued Nocl frequency 50 Hz weight of the machine ca. 500 t

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Ncodpef Dwa Ujfx Ad Njl Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1980, saw blade diameter 380 mm pneumatic clamping ja 46893 weight of the machine ca. 1,3 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Ncsdpfx Asd N Sm Dod Nol +++++

Condition: used, saw blade diameter 560/660/710 mm cutting diameter 170/220 mm cutting range B:1000 x H 220 mm cutting speed 7- 48 m/min Ncsdpfx Adjxnc U Ro Nel clamping devices hydraulic pneumatic 20- 315 mm dimensions 2,9 x 2,2x 1,95 m weight of the machine ca. 2,8 t Used plate saw - part fixures - new security componens - external control panel

Condition: used, Year of construction: 2013, functionality: limited functionality, saw blade diameter: 370 mm, cutting height (max.): 100 mm, feed length X-axis: 1,000 mm, total length: 2,450 mm, total height: 1,900 mm, total width: 1,750 mm, overall weight: 1,060 kg, cutting diameter: 100 mm, cutting length (max.): 99,999 mm, working height: 1,000 mm, The machine can be tilted to 45°. Further technical details are provided in the user and maintenance manual, which is included with the sale. If you have any further questions, please feel free to contact us by phone or email. Kind regards, Weber Geländersysteme. Nodpfsx Di S Usx Ad Nscl

Condition: used, Year of construction: 2001, saw blade diameter 400 mm miter . Kühlung weight of the machine ca. 1 t number 4 Stück +++++ Please note: Nodpfx Ajlug Tuod Necl The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2001, volt 400 V Njdpfxsu T Sfbs Ad Nscl weight Stück 490 kg 2 miter ja 175 mm Rund

Condition: used, Year of construction: 1999, cutting diameter max 400 mm mit Sägeblättern weight of the machine ca. 1,4 t Ncedpfx Aew Sygmed Nsl

Condition: good (used), MEP metal circular saw Tiger 350, saw blade diameter 350mm, swivels up to 60 degrees, including coolant pump and stop. The machine is operational. Cutting area at 90 degrees: flat approx. 180x95mm, square 95mm. For details and condition, see photos. You will receive an invoice applying the margin scheme according to paragraph 25a. VAT cannot be shown separately. Njdpfxeya Ayxs Ad Necl

Condition: ready for operation (used), Year of construction: 1980, Saw blade diameter: 400 mm Cutting capacity at 90° round: 120 mm Rectangular: 200 x 80 or 150 x 70 mm Mitre cut at 45° rectangular/flat: 150 x 70 mm Upright: 100 x 60 mm 2 cutting speeds via pole-changing motor: 19 and 28 m/min Feed rate hydraulically infinitely adjustable: 0 - 1000 mm/min Nodpfex Anl Djx Ad Njcl Drive motor: 380 V, 1.7/2.6 kW Weight: approx. 850 kg Required space: 1200 x 1100 x 1620 mm

Year of construction: 1991, condition: ready for operation (used), Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible. Nsdpfx Asyarq Ted Njcl

Condition: new, Year of construction: 2024, saw blade diameter: 315 mm, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, rotational speed (min.): 17 rpm, rotational speed (max.): 33 rpm, BERG+SCHMID vertical circular saw model VKS 315 Speed: 17+33 rpm - Miter left 60° + right 45° - Clamping vice with double clamping arm (4-fold fixed) for low-burr cuts and quick lateral movement - Saw table with large turntable and particularly stable vice for optimum material clamping - Robust prismatic guide of the saw head (adjustable dovetail guide) Njdperrvn Asfx Ad Njcl - Automatic cooling system - Machine base frame with chip drawer - Metal handle for high clamping force - Counter holder with spring assembly a. Saw blade dimensions: 315x40mm Further accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: excellent (used), Year of construction: 1966, I sell a circular saw made in Germany. Company Eisele model vms II in good condition Ncodpfx Adovbwfns Njl

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 0278, Mitre cold circular saw EISELE type VMS-III-S-HYD Type No. 430 Machine. No. 0278 Year of construction 1984 Sawing range at 90°: (round) Ø 120 mm Sawing area at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 8, 16, 33, 66 rpm. (2 gear stages + 2 motor speeds) Mitre cut 45° to the left, 90° and up to 30°(60°) to the right, infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Hydraulic material quick clamping device - Infinitely adjustable hydraulic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Convenient and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base - Central lubrication (manually operated) Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 490 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. Ncjdpfx Aet A Arljd Nsl The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 0783, Miter cold circular saw EISELE Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox Njdpfxet A Ar So Ad Necl - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: used, Manufacturer: Kaltenbach Type: KKS Saw blade diameter 370 mm Cutting capacity 45° - 90° round 115 mm flat approx. 215 x 20 mm rectangular approx. 95 x 105 mm U-profile approx. 160 x 55 mm Speed: 14, 19, and 28 rpm Nedpfx Aewpb E Hsd Necl Dimensions: 1100 x 1050 x 1600 mm (LxWxH) Weight: approx. 850 kg Equipment: • Semi-automatic operation • Hydro-pneumatic stepless saw blade feed • Mitre cuts on both sides R - L • 0° longitudinal cut possible • Coolant system • 1 saw blade The machine can gladly be demonstrated under power on site. All information without guarantee. Errors and interim sale excepted.

Condition: good (used), Kaltenbach cold circular saw KKS Maschnr.6995Saegeblatt Ø 350 mm-speed 130 m/min-weight total 1200 kg Nodpfed Tp Nljx Ad Nocl

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 119951, saw blade diameter: 760 mm, overall weight: 3,200 kg, Kaltenbach RKT 760 V Ncedpfx Ajumkylsd Njl Cold cutting circular saw designed for metalworking, often used in the steel and metalworking industries for precision cutting. TECHNICAL SPECIFICATIONS: -Disc diameter: up to 760 mm (it is also possible to use a disc with a diameter of 710 mm) -Power requirement: 5 kW -Machine weight: about 3.2 tons -Dimensions: approximately 2.3 x 2.15 x 2.1 meters -Cutting feed speed: adjustable from 0 to 1200 mm/min, with quick return at 3500 mm/min. -Cutting speed at 710 mm saw diameter: 11/22 m/min two-stage with V-belts -Range of gearbox adjustment: 200 mm -Cutting width: 6 mm maximum. -Production year 1998