Used Safety Contactor for sale (10,341)

Condition: new, Safety valve for presses IMI HERION / NORGREN PSV valve, twin valve, directional control valve Type: XSz 10 V ID No. 2492982 Serial No. 2608 Equivalent to order no.: 2492951 Pressure: 3 to 10 bar Compressed air connection thread (A)+(B)+(P)+(S): 1/2" Compressed air outlet (R): flange connection Supply voltage: 2x 24 Volt (DC) - Base plate hole spacing 115 x 63 mm, 4x mounting holes Ø 6.5 mm - Equipped with silencer on compressed air outlet (R) Valve body dimensions L x W x H: 105 x 90 x 220 mm Dimensions with silencer L x W x H: 180 x 165 x 220 mm Weight: 3.0 kg New, unused, from stock Psdjw T U A Sspfx Ahvspp

Condition: new, Year of construction: 2025, A compact design sheet fiber laser metal cutting machine with complete protection Ppodpfohwrg Ejx Ahvjp Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. The pull-out cutting machine table, with the electric table optional, saves space occupation and freshen up the user operation experience. Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Cutting Area: 1000*1500mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. The pull-out cutting machine table, with the electric table optional, saves space occupation and freshen up the user operation experience. Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Ppsdpsikivisfx Ahvjp Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: like new (used), multifunctional tool for checking the safety of low voltage electrical systems SEFT950 Carlo Gavazzi SEFT 950, serial number: 002814/21006, instrument complete with transport bag, cables of various sizes, transducer for converting the measurements stored on the PC, equipment for measurements in medical offices, pegs for step and contact measurements or ground measurements, performs all types of electrical measurements, with an instruction manual. Measure Low-Ohm = Rpe Measure isolation = Riso Measurement of earth and ground resistivity = Re/p Ppedpfx Aog Tdxdehvep Measure LOOP = LOOP Measure RCD = RCD Measure voltage drop = %ΔU Measure the cyclical voltage of the phases = O/V Price Euro 800 + VAT Delivery condition, FCA: Oradea/Romania We can deliver/export everywhere in the World. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2022, functionality: fully functional, SAFETY LIGHT CURTAIN C4000 BASIC Set, transmitter and receiver NOS Pjdexnpqxjpfx Ahvepp SICK: C40E-1501BH030; ORDER NO.: 1022248 SICK: C40S-1501AA030; Order No.: 1022212 RECEIVER; Resolution: 14mm; Height: 1500mm

Condition: excellent (used), Schleich GLP2-E safety tester, insulation tester GLP2E tester Item condition: Used, in perfect condition Pedpfjivd I Sex Ahvjpp SHELF-B-PD(BOR) You can find more testers - new and used - in our store! International shipping costs on request!

Condition: excellent (used), 5 pieces, A-rack, support per side: 390 mm External dimensions: Width: 2420 mm Depth: 1360 mm Ppodpfx Ahexat Ulovsp Height: 2530 mm

Condition: like new (used), Li-ion - Safety Cabinet - Fire Protection Cabinet PRIOLION Type LI92.195.120.07.4 as new 🧰 Product Features • Manufacturer: Priolion • Type: LI92.195.120.07.4 • Condition: as new, see photos • Colour: Light grey - RAL 7035 • Dimensions: 232 x 66 x 225 cm • Own weight: approx. 706 kg • Fire resistance: up to 90 min • Year of manufacture: 2024 • Permanently self-closing doors with oil-damped door closers • Double-leaf design, both leaves accessible with center post • Doors can be operated single-handedly and are lockable with profile cylinder • Cabinet body colour light grey RAL 7035 • GS and CE certified • Testing standards & norms: o DIN EN 1363-1 & DIN EN 1363-2: Fire resistance testing o DIN EN 14470-1 & DIN EN 14470-2: Fire-resistant storage cabinets o DIN EN 16121: Storage furniture for non-residential use o DIN EN 16122: Storage furniture for residential and non-residential use o DIN EN ISO 13854 • Includes: 4 grid shelves, drip trays, and socket strips; high-quality surface (CPL) inside and out; made from non-combustible construction material class A2 - s1; with control unit (optical and acoustic status indication), integrated smoke detector inside the cabinet (triggers automatically in case of fire), plug-and-play design for direct connection to electricity, with surge protection, automatic closure of air inlets and outlets in case of fire 💰 Price €7,900 net excl. VAT / New price over €12,000 • Quantity discounts: on request • Shipping: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment Pjdpfxow Hw S Re Ahvjpp Over 5,000 linear meters of pallet racking from various manufacturers in stock at all times (Subject to changes and errors in technical data, information, prices and prior sale! See our Terms and Conditions, all prices excl. VAT ex warehouse.)

Condition: good (used), Year of construction: 2013, machine/vehicle number: 136149500092-0273, Offer 24109 Technical data: - 4 storage spaces for 50L. bottles - Continuous bottle holder - exhaust air opening - Cabinet is lockable, key is available Psdpotwnlhofx Ahvopp - Space requirement W 1400 x D 465 X H 2150 mm - Weight approx. 120 kg

Condition: used, length 2,550 x width 1,500 mm made of stable grooved beech wood bars with double ramps height 45 mm Ppsdog Eqrdepfx Ahvjp weight approx. 60 kg

Condition: good (used), functionality: fully functional, SafeFAST Elite 212D flow cabinet with stand Manufacturer: Faster-Air Model: SafeFAST Elite 212 D “Technical data sheet” from the manufacturer: Useful dimensions (mm): WxDxH: 1192x580x740 Podpfsv Dhynox Ahvepp Overall dimensions (m): WxDxH: 1350x855x1545 Noise level (dbA): -54 Working aperture (mm): 200 Exhaust flow rate (m3/h): 390 Lighting level (lux): 1200+ Weight (kg): 195 Electrical data: 230 V – 50 Hz

Year of construction: 2013, condition: like new (used), Dueperthal fridge for danger goods Ppjdpfx Ahed Drnqsvsp

Condition: used, length 1,400 x width 1,200 mm made of stable grooved beech wood bars with double ramp height 40 mm Psdpfxog Eqqys Ahvjpp weight approx. 25 kg

Condition: refurbished (used), Refurbished and pressure tested. Lot of 45 flanged safety relief valves, spring loaded. Pressure ratings between 0.5 - 9 Bar. Ppodpev Dw R Njfx Ahvjp

Year of construction: 2023, condition: like new (used), functionality: fully functional, Thermo Scientific Safety Workbench MaxiSafe 2030i. Class II. 3-filter configuration. Segmented stainless steel work surface. 4x 230V power outlets. Interior lighting. UV lamp left/right. Cable feedthrough: 8cm (diameter). Interior: stainless steel. Front flap: folding + motorized. Pjdpfx Ahowurkqsvepp Filter box. External dimensions HxWxD: 223x190x88cm. Internal dimensions HxWxD: 77x180x60cm. Working height: 76cm. Display with touch control panel. Arm supports. Unused. Net purchase price: €19,401.61. Purchase date: 04/2024.

Condition: used, length 1,400 x width 1,200 mm made of stable grooved beech wood bars with double ramp Pedpeg Eqq Dsfx Ahvopp height 40 mm weight approx. 25 kg

Condition: used, length 2,000 x width 1,000 mm made of stable grooved beech wood bars with triple ramp height 50 mm Pedog Eqraepfx Ahvspp weight approx. 32 kg

Condition: new, Year of construction: 2026, Mill without screen Xtra2-A / 26.26 St Low-speed mill without screen, with two coarse crushers, compact and mobile on 4 wheels, 2 of which with brakes. The feed hopper and cutting chamber can be easily and completely opened via a hinge mechanism and quick lock, which allows for quick and easy cleaning. Shredder-type rotor with two primary coarse crushers, each with three crushing fingers, which also allow for the crushing of awkward and larger pieces of scrap. Control with contactor and electrically redundant safety limit switches. The control unit is integrated in a plastic housing, including a 4-meter connection cable and a CEE 16A/6h plug. Standard Z-hopper made of transparent polycarbonate (PC) sheet with a wide loading opening. Collection box for ground material with a capacity of 8 liters, includes a suction hose for connecting a pipe with a diameter of ND 38 or 40 mm. Technical data: • Motor power: 1.5 kW • Power supply: 3 x 400 V, 50 Hz • Cutting chamber opening: 260 mm x 260 mm • Primary shredders: 2 pieces, each with 3 shredding fingers • Rotor speed: 32 rpm Ppjdpowktvgsfx Ahvop • Rotor: multi-tooth, 3 pieces • Static knives: 2 x 3 hardened knives • Cutting configuration: standard cutting module 4 mm (rotor tooth width); optional 5 mm

Condition: used, Hydraulic Double-Column Press Double-Column Hydraulic Press SCHÖN Type TES 25 Machine No. 1847 Year of manufacture: 1977 – Retrofit in 2019 Fully overhauled by Schön in Hattingen in 2019 – Excellent condition Press force: 25 tons Column gap: 500 mm Side clearance between columns: 120 mm Table size: 440 x 320 mm Table opening: Ø 50 mm Ram surface: Ø 140 mm Clamping pin: Ø 40 mm Pedpfxsyg Rfpo Ahvjpp Max. ram stroke: 100 mm Max. installation height: 330 mm Table height above floor: 910 mm Motor output: 4 kW Electrical connection: 400 V, 50 Hz - Complete hydraulic system replaced during 2019 overhaul - Entire electrical control system (contactor-based) renewed in 2019 to new machine standard - Stroke release via two-hand control, electric foot switch, or light curtain - Operating modes: setup, single stroke two-hand, single stroke via foot switch, control via light curtain - SICK light curtain, Type C 4000 with single- and dual-cycle, and safety function - Rapid approach and working stroke - Pressure- or stroke-dependent stroke limitation - Mechanically adjustable fixed stop - Manual press force regulation via knurled knob - Press dwell time extension: 0.5–3 sec. (pressure holding time) - Stroke counter - UVV safety inspection in accordance with BGR 500 (for manual loading) performed in 08/2019 - Full documentation available (user manual, hydraulic diagram, circuit diagram) Required floor space (L x W x H): 1100 mm x 1050 mm x 2100 mm Weight: 900 kg Very good condition

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 2460039, Technical specifications: # Working area: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 1 rotary axis (A – rotary table with indexing head) - Direct angular measuring system with up to 50 rpm, accuracy +/- 5” # Maximum workpiece clamping dimension/weight: Ø575 x 830 mm / max. 360 kg # Rapid traverse: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1 – 17,500 rpm # Spindle interface: DIN 69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools; chip-to-chip average time: 2.5 sec # Maximum tool dimensions: Ø75 mm / length: max. 275 mm / up to 7.5 kg Electrical data: # Mains voltage: 3x400V / 50Hz # Connected load: approx. 85 kVA / 125A Dimensions: # Installation area: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear measuring systems: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling system # Cooling system for shaft, guides, and control cabinet # 2 oil lubrication systems # Oil filtration system (up to 80 bar): Knoll VRF450-2450 (can supply 2 machines simultaneously) # Oil vapor extraction/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire suppression system: Kraft & Bauer # Part detection P/Y: with low-pressure air monitors Ppsdjxxrnbjpfx Ahvsp # In-process measurement: Marposs T25 # Tool breakage detection and length measurement: inductive sensor # Tool presence monitoring in spindle Machine status: NOT OPERATIONAL - Spindle tool and part presence sensors - Tool breakage sensors - Tool magazine piston and slide system door open/close (2 units) - Tool magazine pistons and tool retainer slide system (2 units) - A-axis position encoder - Inductive and magnetic sensors (4 units each) - Chip extraction conveyor requires repair - Chiller for spindle cooling/heat exchanger - Communication module Murr - X axis linear scale - Emulsion chip conveyor level sensor - Hydraulic pump - Motor for hydraulic pump (repairable) - Heat exchanger unit - Electric Siemens contactors for electrical cabinet (3 units) - Safety door lock Euchner - Emulsion filtration unit is shared with another machine (SW BA321 2460038) Note: Machine is NOT WORKING and offered as described.

Condition: excellent (used), MyRef MY-ZB26-TFD refrigeration unit MyRef MY-ZB26-TFD condensing unit suitable for refrigeration applications Typical applications are Freezer cabinets in supermarkets and minimarkets cold stores Beer cellars Milk cooling systems Standard equipment Copeland Scroll M compressor ZB series with sound insulation hood Oil sump heater Psdpovtl T Dofx Ahvjpp Liquid receiver with burst protection Filter dryer Sight glass visible from outside Ball shut-off valves Component-tested combined HP/ND safety pressure switch Electrical equipment: IP 55 switch box, compressor contactor, DIN rail mounting Condenser is integrated and protected in the housing Condenser fins coated with epoxy resin phenol (gold paint*) High-quality housing: solid in 1.5 mm galvanized and powder-coated sheet steel, base plate and feet in 2 mm sheet steel Frame construction with individually removable panels; all screws and components can be accessed from the front with minimal effort Blind rivet nuts with carriage bolts for secure, durable fastening without rust problems Pressure-controlled speed regulator with EMC filter Space-saving installation of several units next to each other possible; required mounting distance 25 mm Type: MyRef -ZB26-TFD Copeland Scroll Condensing unit Type: MyRef -ZB26-TFD Built-in compressor type: ZB19-KQE-TFD-525 Sound pressure level: 39 dbA-10 m Collector volume: 6 liters Air volume: 4500m³/h Cooling capacity: 9 kW Voltage: 400V,3PH,50Hz Power consumption: 8.9 A Dimensions: HxWxD 715 x 1120 x 450 mm Weight: 102 kg Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. Pjdpfx Ahexvca Aevspp 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: new, carrying capacity 250 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. Ppedpfx Aonlb Rwehvop consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: new, carrying capacity 1000 kg number of suction cups 8 suction cup dia. 280 mm Vacuum lifter VH 8-1000 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 4x galvanized crossbeams with a length of 1,000 mm - 8x Springy, articulated and adjustable suction cup holders - 8x suction cups Ø 280 mm, in case of wear the seal can be separated whose metal supports can be changed inexpensively and without tools - 8x ball valves to switch off individual suction cups, thus also smaller Pedpenlb Rzjfx Ahvjpp formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, oil-lubricated rotary vane vacuum pump with a Suction power of 21 m³/h and an ultimate vacuum of 98% (20 mbar). - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: new, carrying capacity 500 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-500 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. Ppsdpfx Ahsq Sc Ausvsp consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.