Used Rule Disc for sale (7,580)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Industrial self-cleaning disc filtration system manufactured by CHEMIPOL. The unit was installed as part of a reverse osmosis water treatment plant and was used for water pre-filtration. The system is equipped with eight TW-type disc filter units operating in parallel. Automatic cleaning is controlled by a Siemens PLC with an HMI operator panel. TECHNICAL DATA Manufacturer: CHEMIPOL Model: TW8P2L3 Equipment type: Self-cleaning disc filtration system Number of filter units: 8 Filter type: TW disc filters Configuration: Parallel operation Cleaning system: Automatic self-cleaning Pressure monitoring: Two pressure sensors measuring inlet and outlet pressure Control system: Siemens PLC Operator interface: HMI touchscreen Bjdpfxjzvlm Ee Acnjll Application: Water treatment and reverse osmosis pre-filtration

Condition: repair required (used), Disc chipper Bruks IDC000127 - infeed 220 X 280 mm - without electric motor Bledpfx Acjvzw Tfjnol

Condition: used, Year of construction: 2021, functionality: fully functional, disc diameter: 400 mm, rotational speed (min.): 915 rpm, power: 1.5 kW (2.04 HP), grinding wheel diameter: 400 mm, type of input current: three-phase, Equipment: emergency stop, motor brake, Felder disc sanding machine CB 400 D, acquired on April 13, 2021, for precise disc sanding of wood workpieces. Suitable for edges, end faces, small components, curves, and fine adjustments in the woodworking shop. Key technical data: - Machine type: Disc sanding machine - Model: CB 400 D - Sanding disc: approx. Ø 400 mm - Speed: approx. 915 rpm - Motor power: approx. 1.5 kW - Voltage: 400 V - Dust extraction connection: approx. Ø 100 mm - Table size: approx. 460 x 200 mm - Table tilt: approx. -45° to +45° - Dimensions: approx. 770 x 460 x 1130 mm Features: - Practical machine for precise finishing and clean workpiece edges - Suitable for edge and contour sanding, adjusting wood components, and finishing work - Of interest for carpentry shops, model making, training, and makerspaces Warranty exclusion Bodsztxpnjpfx Acnell

Condition: like new (used), Year of construction: 2004, Grinding wheel diameter: 500 mm Grinding table width in front of the wheel: 240 mm Grinding table tilt downwards/upwards: 45/30° Grinding wheel speed: 1500 rpm Drive motor: 400 V, 4 kW Bljdpszvm N Usfx Acnel Weight: 280 kg

Condition: used, functionality: unexamined, Year of construction: 2001, machine/vehicle number: 3533, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, For sale: a custom-made cutting and marking line (using disc/circular saw) for round and square tubes, manufactured in 2001 by Simec Srl (Schio, Vicenza, Italy). The system consists of a Simec bar feeder "Caricatore BM" (serial number 3587) that feeds the main Simec unit "MEC 120 MI" (serial number 3583), with a disc cutting station identified with the FAT logo. The line includes a workbench with guides and measuring scales, a collection box for cut pieces, and a roller table for material transport. The structure is mounted on legs and features its own control panel (Siemens Simatic OP3 interface and Rovan Elettronica counter/display), manual control buttons, a mode selector, pressure gauges, and a three-phase electrical connection. Condition: it was in operation until approximately 1 year ago; the current condition has not been recently verified or tested. Inspection/testing by the buyer is recommended before purchase. Bedpfjzvc Utox Acnoll

Year of construction: 2022, operating hours: 200 h, condition: excellent (used), functionality: fully functional, travel distance Y-axis: 269 mm, machine/vehicle number: 1111127689, Equipment: sliding door, Hello, the machine is in perfect condition. For more information, please contact me via email. Bjdpfjyfrucex Acnoll

Condition: used, bottom outlet NW 50 Bjdozx A Dmopfx Acnoll pressure gauge with outlet Optional: various fittings

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, automatic traversing table BAUMANN BSB 2L, serial no. 212.880, size 64x92 cm air table, air-blowing roller, Bedozwdi Ispfx Acnjll maximum layer height: 160 mm Power: 2 kW 400V - 50Hz - 5.5A Net weight: 550 kg

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: general overhaul Control: Mitsubishi - 64 bit CNC Generator power: 70 Amperes - multipulse Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm Bodpfx Ajzx Ambecnoll Electrode changer: 30-position pick-up rotary electrode changer Working tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) The OPS INGERSOLL wire erosion machine GANTRY 1200 HSJ / 64 bit, manufactured in 2006, has undergone a comprehensive and professional general overhaul in our facility and is in very good condition, both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected. The following overhaul work was carried out on the aforementioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axes. Replacement of all (4) ball screws of the tank drive. Inspection and testing of the C-axis for tightness and accuracy. Geometric inspection of all axes according to OPS INGERSOLL protocol. Thorough cleaning of the entire machine base. Cleaning of the entire working tank including replacement of the felt scrapers. Complete repainting of the machine. Overhaul of the dielectric pumps. Replacement of all hydraulic and dielectric lines. Replacement of all pneumatic lines. Cleaning of the control cabinet, generator and control system. Replacement of all fans and batteries. Overhaul or replacement of all power supplies, units and servo amplifiers. Laser measurement after the machine overhaul. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL. The machine is ready for immediate use and is ideally suited for reliable production operation. 09/02.

Condition: like new (used), Year of construction: 2023, operating hours: 68 h, Struers Discotom-100 – 2023 – only 68 operating hours – Struers warranty For sale: Struers Discotom-100, a professional, automatic laboratory cutting machine designed for the precise preparation of samples for metallographic analysis. The unit is from 2023 and is in very good condition. The machine has been used very little – the counter shows only 68 total operating hours. Key features: * Manufacturer: Struers * Model: Discotom-100 * Year of manufacture: 2023 * Operating hours: only 68 * Condition: very good, practically unused * Warranty: 12 months Struers warranty * Automatic, programmable cutting * Control of feed and sample positioning * Movable X/Y work table * Large working chamber for cutting larger and irregular parts * Adjustable blade rotation speed * Cooling system during cutting * Enclosed working chamber cover with a large window * Clear control panel * Designed for the precise cutting of metals and other materials before further metallographic preparation The Discotom-100 is a high-quality device used in quality control laboratories, materials laboratories, R&D departments, and in the metallurgical, automotive, and manufacturing industries. A major advantage of the offered unit is its very low operating hours – only 68 – and the one-year Struers warranty, which makes it an attractive alternative to purchasing a new machine. Bodszx Hq Dspfx Acnjll Delivery possible in January 2027.

Condition: used, axle configuration: 3 axles, first registration: 08/2016, suspension: air, tire size: 435/50R 19.5, color: other, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes = More information = Axle configuration Tyre size: 435/50R 19.5 Make axles: BPW Brakes: disc brakes Suspension: air suspension Axle 1: Tyre profile left: 30%; Tyre profile right: 30% Axle 2: Tyre profile left: 30%; Tyre profile right: 30% Axle 3: Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 6.106 kg Bodpfx Acezx Sfmjnell Carrying capacity: 32.894 kg GVW: 39.000 kg

Condition: used, Year of construction: 1985, functionality: limited functionality, cutting height (max.): 180 mm, total width: 400 mm, overall weight: 6,000 kg, TECHNICAL DATA - Maximum cutting height: 180 mm - Track width: 400 mm - Shaft width: 370 mm - Shaft diameter: 60 mm - Maximum blade diameter: 300 mm - Blade bore diameter: 80 mm - Minimum workpiece length: 630 mm - Maximum workpiece width: 600 mm From top: - Pneumatic clamping - Ratchets - Metal pressure roller, 2 units - Ratchets - Shaft with saws - Smooth pressure roller - Ratchets - Smooth pressure roller From bottom: - Toothed metal drive shaft, 2 units - Ratchets - Track - Shaft with saws - Track Bedpfx Aszhicbscnjll - Continuously variable feed rate adjustment via inverter - Main motors: 2 x 55 kW - Feed motor: 4 kW - Hydraulic body lifting (up/down) - Hydraulic shaft adjustment Saws - Pump motor: 0.37 kW - Centralized lubrication - Suction port diameters: 1 x 300 mm, 1 x 380 mm - Dimensions (length/width/height): 3200 x 2350 x 2000 mm - Weight: approx. 6000 kg - Two axles

Condition: used, maximum load weight: 37,300 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 04/2008, next inspection (TÜV): 07/2027, total length: 9,720 mm, total width: 2,500 mm, Year of construction: 2008, Additional information: * Type | First axle: Goodyear R * Tire size | First axle: 385/55 R22.5 * Tire tread depth inner left | First axle: 40% * Tire tread depth inner right | First axle: 40% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Goodyear R * Type | Third axle: Goodyear R * Tire size | Second axle: 385/55 R22.5 * Tire size | Third axle: 385/55 R22.5 * Tire tread depth inner left | Second axle: 40% * Tire tread depth inner left | Third axle: 40% * Tire tread depth inner right | Second axle: 40% * Tire tread depth inner right | Third axle: 40% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension Bodpfxezpdg Re Acnoll Additional features: * Homepage * Lift axle * SemCollection Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your specific country in advance. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors. The stated prices exclude BPM (Dutch motor vehicle tax) and are only valid for export.

Condition: good (used), Year of construction: 2010, total length: 2,035 mm, total width: 1,035 mm, total height: 1,015 mm, overall weight: 400 kg, For Sale: Conveyor table from Köning Brand: König Type: Conveyor table 800 mm Belt width: 800 mm Conveyor height: 850 mm max Year of manufacture: 2010 It is possible to view this machine on site. If you have any questions, please do not hesitate to contact us. Sincerely, Blodpezvfh Ajfx Acnol Leo Holland

Condition: used, Year of construction: 1982, machine/vehicle number: 82/MA/7, functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 350 mm, saw blade diameter: 350 mm, saw blade bore: 80 mm, Equipment: documentation/manual, Year of manufacture 1986 Fully functional Cutting height (max.) 180 mm Cutting width (max.) 350 mm Saw blade diameter 350 mm Saw blade bore 80 mm Disc diameter 350 mm Description A.COSTA LEOPARD / S Bodpfx Aezhh Uvocnell Cutting width: 350 mm Cutting height: 180 mm Main motors: 2 x 55 kW Feed motor: 5.5 kW Height adjustment motor: 0.37 kW Total power: 0.37 kW Max. disc diameter: 350 mm Spindle diameter: 2 x 80 mm Sleeve diameter: 2 x 100 mm Minimum element length: 800 mm Electric feed adjustment Automatic central lubrication Electric height adjustment Adjustment Electric disc height adjustment Six upper pressure rollers Pneumatic clamps Anti-ejection latches Weight: ± 6.000 kg Spare sleeves, spacers, saw blades Total length: 400 cm Number of rollers: 2 straight, 14 angled. TOTAL: 16 lower rollers + 2 upper rollers Pneumatic clamping of upper rollers

Condition: ready for operation (used), functionality: fully functional, 4-disc end-trimmer Trimming conveyor belt Bjdpfozkugqox Acnoll Operational

Condition: excellent (used), Year of construction: 2006, Dear customers currently we offer a disc sanding machine of the brand HoPa. Here are some technical datas: Disc diameter: 800mm Table length: 1.150 mm Table width: 470 mm Table tilling up and down: +30/-45° Power: 4,0 kW Speed: 750 rpm Dimensions: L 130 cm x B 90 cm x H 180 cm Weight: 390 kg Bedpfx Asxlzkfscnjll We are looking forward to your questions and inquiries.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, Equipment: CE marking, Disc scalping screen, opening size 30 x 30 [mm], 9 shafts, passing 0/30 [mm], offset disc arrangement, driven by hollow-shaft gear motor. Auxiliary frame. Blodsxcb I Sepfx Acnjl

Condition: used, Year of construction: 2022, machine/vehicle number: 15084, functionality: fully functional, cutting width (max.): 420 mm, empty load weight: 3,100 kg, cutting length (max.): 200 mm, saw blade length: 5,500 mm, motor model: IE3, Equipment: documentation/manual, SECOND-HAND TS 400 THIN CUTTING HORIZONTAL BANDSAW CE RULES TECHNICAL DATA: SPECIAL DEVICE "OFFSET": DEVICE "DOUBLE SPEED": - Max. cutting capacity 420x200 mm - Distance from blade to conveyor 2-150mm - Min. cutting thickness from the top 0.75 mm - Saw wheel diam. 800 mm. - Saw wheel thickness 50 mm - Sawblade length 5500 mm. - Sawblade width 50 mm. Bsdpfx Ajyam U Tocnsll - Sawblade speed 17-34 m/s - Conveyor belt size 400x4200mm - Oil mist cooling system - High accuracy hydraulic blade tension system (2500 kg) - Variable feed speed 0-25 m/min - Feed motor 2HP with inverter - Main motor 30 HP with inverter - Blade lift motor 2 HP - Dust hood outlet diam. 125 mm x 2 - Machine net weight Kg. 3100 - Air loaded pressure roller - Slow cutting start function - Spraying jets for blade lubrication - Motor IE3 INCLUDED - S/N 15084 - Year 2022

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2017, total length: 9,730 mm, total width: 2,550 mm, total height: 1,350 mm, suspension: air, wheelbase: 7,790 mm, Year of construction: 2017, Axle configuration Make axles: BPW Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.600 kg Carrying capacity: 35.400 kg GVW: 39.000 kg Maintenance, history and condition APK (MOT): tested until 11/2026 Technical condition: good Visual appearance: good Identification Registration number: OP-61-ZL Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes Bjdpfxozxh Dxe Acnsll - EBS - Twist-locks = Remarks = LAG O-3-CC / Tank Chassis 20-30FT / BPW + Disc

Condition: ready for operation (used), Year of construction: 2001, overall weight: 3,000 kg, Disc screen machine, screen length: approx. 2600 mm, screen width: approx. 910 mm, disc spacing: approx. 170 mm, (offset by approx. 85 mm), axle distance: approx. 50-60 mm Overall length: 3450 mm, overall width: 1500 mm, height: 2400 mm, weight: approx. 2500 kg, FLENDER gearbox, 6 axle bearings on the drive side are brand new, Bodpfx Aszmav Necnsll Used machine in good, operational condition, No nameplate available.

Condition: good (used), Year of construction: 1997, cutting length (max.): 3,100 mm, Veneer saw with saw blade and disc instead of a planing unit. It first saws, and then instead of planing, it mills with a disc (the milling cutters are mounted on the side of a disc). Maximum cutting length: 3100 mm. Blodpfxjzcc I Us Acnsl Equipped with a rear support and finger stop.

Condition: good (used), 1 used rotary surface grinding machine Manufacturer: Zimmermann Type: SZ2 Blsdpezlg Upefx Acnel Year of manufacture: 1989 Technical data: Double-sided rotary surface grinding machine Grinding wheel: 2 x Ø 600 mm Swiveling worktables Motor power: approx. 1.5 kW Speed: approx. 1,000 rpm Clockwise/counterclockwise rotation Robust industrial design Weight: approx. 350 kg The machine is in used, fully functional condition with the usual signs of wear and tear consistent with its age. It is ready for immediate use and is ideally suited for daily use in a workshop. Inspection and a test run can be arranged at any time.

Condition: used, Year of construction: 2010, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: E1053A0011, overall weight: 850 kg, total height: 1,940 mm, total length: 1,700 mm, total width: 950 mm, Specification: Protection rating: IP54 Power: 16kW/17 kVA 24A at 400V Frequency: 50-60 Hz Bledpfxowq Rhme Acnol Supply voltage: 380V (-10%) to 460V (+10%) The Trumpf Laser TruDisk 2602 is a powerful and robust laser system, ideally suited for demanding industrial applications. With its high precision and efficiency, it enables fast and high-quality cutting processes with various materials. The compact design ensures easy integration into existing production lines, while the innovative technology guarantees stable and long-lasting performance.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, OPS INGERSOLL GANTRY EAGLE 800 Year of manufacture: 2022 Overhauled: July 2026 Top condition, very few operating hours (1540 hours of erosion time) EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld, multifunctional control unit Manual erosion with Powertec handheld EAGLE Powertec – fine and roughing generator PT 60, 60 Amperes (60 Amperes peak current) High-speed jump: max. 18,000 mm/min. Travel distances (X, Y, Z): 550 x 850 x 450 mm Bledpfxezvctpo Acnsl Linear measuring system in all axes Distance table / electrode chuck: min. 135 mm / max. 585 mm Electrode changer: 20-position pick-up disc magazine Work tank (W x D x H): 800 x 1,100 x 480 mm Work table (W x D): 760 x 1,000 mm Load capacity: 2,000 kg Overhang load: 200 kg Machine dimensions (W x D x H): 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: Erowa, type UPC production chuck CO2 fire extinguishing system 01.09.