Used Rule Disc for sale (11,269)

Condition: used, first registration: 03/2011, color: other, Year of construction: 2011, NICE AND GOOD SEMITRAILER WITH A NEW ROOF AND VALID TUV / APK Kedpfjxrz Rfjx Affsnf

Condition: excellent (used), axle configuration: 2 axles, first registration: 06/2007, loading space length: 6,430 mm, loading space width: 2,480 mm, loading space height: 2,230 mm, total length: 10,100 mm, total width: 2,550 mm, total height: 3,600 mm, suspension: air, tire size: 385/65 R22,5, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Air suspension = Notes = TRANSPORT TO ANTWERP 590 EURO = Additional information = Ksdpfsxq Ri Ijx Affsnf Tyre size: 385/65 R22.5 Brakes: disc brakes Suspension: air suspension Unladen weight: 4,490 kg Payload: 13,510 kg Gross vehicle weight: 18,000 kg Technical condition: very good Optical condition: very good

Condition: good (used), Disc sander, disc grinder, disc sander, edge sander, edge grinder -Drive: 2.2 kW 3000 rpm -Plate diameter: 420 mm Kodecmh H Tspfx Affenf -Table size: 50 x 420 mm -Dimensions: 1000/600/H1150 mm -Weight: 210 kg

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Knjdpfx Afjh Ellzjfjf Belt width 500mm 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: used, Combined disc + vertical belt sander Disc diameter: 600 mm Encumbrance: 110 x 80 cm, height 160 Kodpfelagdwox Affenf

Condition: used, Disc sander with spindle sander KURT EHEMANN type V K8 Combined drum sanding machine - double sanding machine, cylindrical rod sanding machine Machine no. No. 6812420 Year of construction 1968 Sanding disc diameter 800 mm Table support on sanding disc 900 x 300 mm Sanding disc speed 940 rpm Table height of sanding disc 900 mm Spindle sanding unit with sanding sleeve Ø 50 mm Table support for spindle sanding unit Ø 500 mm Table height spindle sanding unit 1000 mm Spindle sanding unit speed 1410 / 2420 rpm pole-changing Kodpferk U Edex Affsnf Motor power sanding disc 3 kW Motor power spindle grinding unit 1.1 / 1.6 kW Mains connection 380 Volt, 50 Hz - inclinable sanding table, 30° downwards/ 15° upwards - the entire table can be swiveled away from the plate for changing sandpaper - Spindle sanding unit with clockwise/anticlockwise rotation (1410 rpm for clockwise rotation, 2420 rpm for anticlockwise rotation) - Spindle sanding unit with oscillating stroke movement 10 mm - Height-adjustable grinding spindle in the table - Spindle sanding unit with inclinable rotary table, inclinable by approx. 30° - Rotary table with removable segment inserts Ø 54 / 84 / 308 mm - Pipe connection for extraction system, rectangular 100 x 170 mm Space requirement L x W x H 1500 x 1100 x 1400 mm Weight 550 kg Very good condition

Condition: used, axle configuration: 3 axles, first registration: 10/2007, color: other, Year of construction: 2007, Empty weight: 7.460 kg Knedpfx Afjxru I Refsf Axle 1: left 12 mm right 12 mm Axle 2: left 10 mm right 10 mm Axle 3: left 12 mm right 12 mm

Condition: excellent (used), axle configuration: 3 axles, first registration: 08/2004, total length: 10,750 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385/65 R22.5, Year of construction: 2004, Equipment: ABS, = Additional options and equipment = Kedsxq Rinjpfx Affsnf - Air suspension - Disc brakes = Notes = TRANSPORT TO ANTWERP 590 EUROS = Further information = Axle configuration Tyre size: 385/65 R22.5 Axle brand: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: lift axle Weights Unladen weight: 5,940 kg Payload: 32,060 kg Gross vehicle weight: 38,000 kg Condition Technical condition: very good Visual condition: very good

Condition: used, maximum load weight: 32,342 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2013, next inspection (TÜV): 03/2026, loading space length: 13,450 mm, loading space width: 2,490 mm, loading space height: 2,710 mm, total width: 2,550 mm, Year of construction: 2013, Further information: * Curb weight: 6,658 kg * Tyre size | First axle: 385/65 R22.5 * Tyre tread depth inner left | First axle: 30% * Tyre tread depth inner right | First axle: 30% * Max. axle load | First axle: 9,000 kg * Tyre size | Second axle: 385/65 R22.5 * Tyre size | Third axle: 385/65 R22.5 * Tyre tread depth inner left | Second axle: 30% * Tyre tread depth inner left | Third axle: 30% * Tyre tread depth inner right | Second axle: 30% * Tyre tread depth inner right | Third axle: 30% * Max. axle load | Second axle: 9,000 kg * Max. axle load | Third axle: 9,000 kg * Position | First axle: Rear * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Position | Second axle: Rear * Position | Third axle: Rear * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension Additional equipment: * Rear doors * Homepage * Tail lift (Laadklep) * SemCollection * SemStars Knsdpfx Afexla U Aefsf Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please consult us regarding costs and procedures for your respective country Location | Maasdijk (NL) | 140 km from border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to change, prior sale, and errors excepted. Listed prices are exclusive of BPM and apply only for export.

Condition: excellent (used), Year of construction: 2003, Disc Sander by FZ Zimmermann This disc sander is specifically designed for model making. Drive motor: 230 Volt, 0.37 kW Selectable left/right rotation, providing optimal use of abrasives Speed approx. 1,400 rpm Kedpfx Asxb Eiwjffenf Disc diameter: 300 mm Planed machine table approx. 400 x 160 mm Cast iron table tiltable 45° up and down Table can be folded forward for easy disc change Optional accessory: mitre gauge with angle guide (sliding fence) Extraction port: 56 mm Original paint, some areas retouched Operating manual CE certification Includes 20 sanding discs (P60 grit) and one can of disc adhesive Very well-maintained machine from prototype manufacturing for the automotive industry. Dimensions approx. 430 x 440 x 400 mm (L x W x H). Weight approx. 25 kg. The machine can be demonstrated by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this vendor."

Condition: good (used), Year of construction: 1981, turning diameter over cross slide: 630 mm, spindle bore: 95 mm, turning diameter: 1,380 mm, turning diameter over bed slide: 930 mm, turning length: 1,000 mm, total length: 2,800 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 6,200 kg, Lathe TPC 90 x 1000. Manufacturer: PORĘBA (PL) - 1981. Turning diameter over bed: 930 mm. Turning diameter over carriage: 630 mm. Turning diameter in gap: 1380 mm. Spindle bore: 95 mm. Spindle speed range: 8–800 rpm. Max. turning length in gap: 400 mm. Max. turning length with tailstock: 750 mm. Max. turning length without tailstock: 1000 mm. Kjdpfx Aoxiwfysffjnf Max. travel of inner bed: 450 mm. Saddle feeds range, 80 steps: - Longitudinal: 0.1–12.8 mm/rev. - Cross: 0.05–6.4 mm/rev. 2-speed motor: 15/22 kW. Morse taper internal: No. 6. Dimensions (L x W x H): 2780 x 1800 x 1750 mm. Weight: 6200 kg. Equipment: 4-jaw faceplate 800 mm, 3-jaw self-centering chuck 400 mm, tailstock.

Year of construction: 1987, condition: good (used), machine/vehicle number: 17/4, usable grinding wheel outer Ø: 600 mm Knsdpfx Afsit N Ipefsf Table size: 470 x 950 mm Table can be tilted down/up to: 45/30° Table height above floor: 950 mm Grinding wheel speed: 940 rpm Grinding wheel drive: 380 V, 940/1140 rpm, 2.2/2.5 kW Weight: 237 kg

Condition: used, axle configuration: 3 axles, first registration: 06/2007, color: other, Year of construction: 2007, Empty weight: 8.075 kg Axle 1: left 6 mm right 6 mm Knedpjxqztkjfx Affof Axle 2: left 10 mm right 10 mm Axle 3: left 6 mm right 6 mm

Condition: used, Used GEA Westfalia model HSB-300-06-777 stainless steel disc stack centrifuge. Inlet feed 1.16kg/dm3 & heavy liquid 1.30kg/dm3. Maximum rated 4,800rpm. Unit includes stainless steel collection pot, used Seepex pump, control cabinet.. Unit is driven by 75kw, 1486rpm, 400volt, 3/50 electric motor. Ksdpfx Aew T Rh Dsffenf

Condition: new, Year of construction: 2025, CORMAK BMS250 Brush and Disc Multifunctional Sander – A Modern and Efficient Solution for Industrial Use The CORMAK BMS250 multifunctional brush and disc sander is a modern and high-performance combination machine designed for industrial, workshop, and woodworking applications. By integrating both brushing and disc sanding functions, this unit ensures maximum flexibility and efficiency when working with metal, wood, and plastics. Fitted with high-quality NSK bearings, the machine operates exceptionally quietly, smoothly, and reliably over extended periods. This feature sets it apart from competitors and guarantees professional performance. The brush sander with a stable stand features a balanced rotor mounted on ball bearings and a powerful motor with copper windings, providing high torque – essential for intensive sanding tasks. An integrated 60 mm dust extraction port allows for easy connection to an extraction system, improving both work comfort and operator safety. Additionally, the CORMAK BMS250 disc sander comes with an adjustable work rest and an IP54-rated enclosure, ensuring precise operation and protection for the user. If you're looking for a dependable bench sander with versatile capabilities, the BMS250 model will meet the demands of even the most discerning professionals. Key Features: Combined brush and disc sander – maximum versatility Industrial-grade NSK bearings – quiet operation and long lifespan Suitable for sanding metal, wood, and plastics – wide range of applications Copper-wound motor – durability and high performance 60 mm dust extraction port – clean and safe workspace Stable base – ergonomic and comfortable operation Technical Specifications: Specification Value Disc size 250 x 32 mm Knjdjxfgz Nepfx Affjf Disc bore diameter 32 mm Disc grit K 36 Rotational speed 2960 rpm Motor power (S1 continuous duty) 0.9 kW Motor power (S6 intermittent) 1.5 kW Dust extraction port diameter 60 mm Voltage 400 V Dimensions 600 x 400 x 1130 mm Weight 24 kg S1 – Motor power for continuous operation under full load S6 – Motor power for intermittent operation with idle periods of up to 40%

Condition: used, axle configuration: 3 axles, first registration: 03/2011, color: other, Year of construction: 2011, Empty weight: 7.865 kg Axle 1: left 8 mm right 8 mm Axle 2: left10 mm right10 mm Axle 3: left 8 mm right 8 mm Kodpfx Asxqxq Heffonf

Condition: new, Year of construction: 2025, CORMAK MSM250 Belt and Disc Sander with Stand – A Professional Machine for Multiple Applications The CORMAK MSM250 multifunctional belt and disc sander is a modern and efficient combination sanding machine designed for industrial, workshop, and woodworking use. By combining both belt and disc sanding functions, this unit offers maximum flexibility and efficiency when working with metal, wood, and plastics. Equipped with high-quality NSK bearings, this sander operates extremely quietly, smoothly, and reliably over long periods. This sets it apart from the competition and ensures professional-grade performance. The belt sander with stand features a balanced rotor supported by ball bearings and a powerful motor with copper windings, delivering high torque – essential for intensive sanding tasks. An integrated 38 mm dust extraction port allows easy connection to a dust collection system, improving both comfort and safety during operation. Additionally, the CORMAK MSM250 disc sander with stand is equipped with an adjustable work rest and an IP54 protection rating – ensuring precision and operator safety. If you're looking for a reliable bench sander with universal application, the MSM250 model will meet the expectations of even the most demanding users. Key Features: Combination belt and disc sander – maximum functionality Industrial-grade NSK bearings – quiet operation and high durability Suitable for sanding metal, wood, and plastics – versatile applications Copper-wound motor – reliability and performance 38 mm dust extraction port – clean and safe workspace Stable stand – user comfort and ergonomic design Technical Specifications: Specification Value Disc size 250 x 32 mm Disc bore diameter 32 mm Disc grit K 40 Belt size 1020 x 75 mm Belt grit P 80 Rotational speed 2960 rpm Motor power (S1 continuous duty) 0.9 kW Motor power (S6 intermittent) 1.5 kW Voltage 400 V Kjdpfoxfgw Rsx Affenf Dimensions 570 x 310 x 1410 mm Weight 32.5 kg S1 – Motor power for continuous operation under full load S6 – Motor power for intermittent operation with idle periods up to 40%

Condition: used, axle configuration: 3 axles, first registration: 01/2012, color: other, Year of construction: 2012, Empty weight: 7.190 kg Axle 1: left 12 mm right 12 mm Kodpfx Afjxqnz Uofjnf Axle 2: left 12 mm right 12 mm Axle 3: left 10 mm right 10 mm

Condition: used, axle configuration: 3 axles, first registration: 09/2011, color: other, Year of construction: 2011, Empty weight: 5.100 kg Knsdpfxexqfyho Affef Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 02/2018, color: other, Year of construction: 2018, Empty weight: 5.220 kg Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 0 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers! Kedpexp Ny Njfx Affjnf

Condition: used, color: other, first registration: 10/2006, Year of construction: 2006, Serial number: 147.96.92.7.48.20 We have a stock of >100 axles. Ksdpfxjxmhd Ij Affenf Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 10/2006, Year of construction: 2006, Serial number: 147.96.92.7.48.20 We have a stock of >100 axles. Kodexmhcqopfx Affonf Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 10/2006, Year of construction: 2006, Serial number: 147.96.92.7.48.20 Knodsxmhbgjpfx Affsf We have a stock of >100 axles. Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 09/2005, Year of construction: 2005, Serial number: no template We have a stock of >100 axles. Knedpfoxf Iqxex Affjf Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 09/2005, Year of construction: 2005, We have a stock of >100 axles. Kedpsxf Ip Ijfx Affenf Please contact us if you can't find what you are looking for.