Used Routing Cutter for sale (3,338)

Condition: used, Year of construction: 2021, machine/vehicle number: 2001, Drive type: Diesel, ENGINE: KUBOTA V3307 CR TE5B EU, Power: 54.6 kW, Displacement: 3331 ccm, Unladen weight: 3500 kg, Operating hours: 707 h, with radio remote control. Cpsdpoyf R Arefx Ac Nou

Condition: reconditioned (used), Please read the technical specifications thoroughly. If you are considering this machine as an investment, we kindly request your complete credentials, including a valid phone number and email address, in order to provide an offer. Deckel FP1 AKTIV (3-axis active) Machine no.: 2102-5745 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment features: - Heidenhain 3-axis active digital readout, type TNC 113 - Infinitely variable feed in X, Y, and Z axes - Quill stroke on vertical milling head: 60 mm - Vertical milling head swivels and can be extended horizontally by 100 mm - Coolant system (coolant tank integrated in machine base) - Documentation - Central lubrication Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry check videos can be provided upon request. Cedpoxpwfgofx Ac Nepu Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y-axis: 0.002 mm (measuring distance 150 mm) Parallelism deviation X-axis: 0.002 mm (measuring distance 300 mm) The following parts have been renewed: - Central lubrication checked - Heidenhain digital readout overhauled - Set of wipers installed - LED indicators for digital readout replaced - Oil change - Vertical milling head newly mounted - Oil sight glass replaced Price quoted is net, ex-stock, loaded.

Condition: good (used), Please read the technical specifications in full. If you are considering the machine as an investment, we kindly request your complete identification, including a valid telephone number and email address, in order to provide you with an offer. DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of the milling head arm: 100 mm Expansion of working area to: 300 x 260 mm Spindle speed vertical/horizontal: 40 – 2,000 rpm Number of gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z-axis: 5 – 500 mm/min Feed adjustment: stepless Rapid traverse X/Z-axis: 1200 mm/min Feed Y-axis: manual Fixed angular table: 600 x 210 mm Swivelling vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data are not binding! Features: - For horizontal machining, the milling head is swiveled by 90 degrees and pushed backwards. - 3-axis precision digital readout HEIDENHAIN - Stepless feed in X/Z axis - The machine underwent partial overhaul by a specialist company several years ago. Equipment: - 3-axis HEIDENHAIN digital readout - Micro-cooling spray unit - Fixed angular table - Chip tray - Machine lamp - Machine feet Further accessories available upon request! Condition: good to very good, from training workshop Cpsdpfx Ajxyc Tkec Nju Available from March 2026

Condition: excellent (used), Please read the technical specifications in full. If the machine is of interest to you as an investment, we kindly request your complete identification including a correct telephone number and email address before submitting an offer. DECKEL Tool Milling Machine FP 1 No. 2101 with HEIDENHAIN 2-axis digital readout Travels: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Extension of working area to: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear stages: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z-axis: 5 – 500 mm/min Feed control: stepless Rapid traverse X/Z-axis: 1,200 mm/min Y-axis feed: manual Fixed angle table: 600 x 210 mm Vertical head swivels: +/- 90 degrees Weight: 710 kg Cjdpfsxyc N Eex Ac Nepu Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data subject to change! Features: - For horizontal machining, the milling head is swiveled by 90 degrees and pushed back. - 2-axis precision digital readout HEIDENHAIN POSITIP VRZ 719 - Stepless feed on X/Z-axis - The machine received a partial overhaul by a specialist company a few years ago. Equipment: - 2-axis digital readout HEIDENHAIN - Fixed angle table - Chip tray - Machine lamp - Machine feet Additional accessories available upon request! Condition: Good to very good from training facility Available from March 2026

Condition: excellent (used), Please read the technical specifications carefully. If you consider this machine as a potential investment, we kindly request your full credentials, including a correct phone number and email address, in order to provide an offer. Milling Machine Macmon M100 (comparable to Deckel FP1) Codpfswu Egxex Ac Nepu Speed range: 40-2000 rpm Travel X-axis: 310 mm Travel Y-axis: 170 mm Travel Z-axis: 340 mm Tool holder: SK 40 Drawbar thread: S20x2 Table clamping surface: 600 x 215 mm T-slot size: 12 mm Weight approx. 1,120 kg Dimensions: 1066 x 1048 x 1330 mm Accessories/Equipment: - Machine lamp - 3-axis digital readout - Coolant system - Operating manual - Machine feet The machine has been technically inspected and is in good condition. Backlash X-axis: 0.1 mm Backlash Y-axis: 0.1 mm Backlash Z-axis: 0.2 mm Net price ex works, loaded from stock.

Condition: like new (used), functionality: fully functional, Make: Jäckle & Ess System GmbH (Brand: JESS Welding) Model: Power Plasma (Industrial Plasma Cutting System) Serial Number: 11300321 Origin: Made in Germany Description: Heavy-duty industrial plasma cutting machine engineered and manufactured by Jäckle & Ess in Germany. This robust Power Plasma system is designed for professional metal fabrication, workshop, industrial and OEM cutting applications. It delivers reliable performance with stepless current control, high thermal duty cycle, and compliance with EN welding/plasma standards. Main Features: * Industrial Plasma Cutting Unit – Suitable for high-precision cutting of steel and other conductive metals. * Stepless Current Adjustment – Easily set the output within the operating range for optimal cutting quality. Cpedpfx Ajyhdcwec Nou * High Open-Circuit Voltage (U₀ ~345 V) – Ensures stable arc ignition and robust cutting performance. * Duty Cycle: Designed for continuous work – e.g., up to 60% (eta) 160 A / 144 V and 100% (eta) ~130 A / ~132 V (at 40 °C). * Three-Phase 400 V Input – Industrial power supply standard. * IP22S Protection Rating – Suitable for workshop environments. * Standard Safety Compliance: IEC 60974-1 and IEC 60974-10 Class A (welding and plasma safety standards). * Built-in Cooling and Protection: Integrated thermal overload management for reliable duty. Applications: Ideal for structural fabrication, sheet metal shops, industrial maintenance, HVAC, automotive repair shops, metal art/architecture, and production cutting environments.

Condition: used, Year of construction: 2020, Console / table Horizontal clamping surface (L x W) mm 315 x 710 T-slots (number / width / distance) mm 5 / 14 / 63 Spindle / table distance mm 100 - 450 Max. table load kg 200 Travel, automatic / manual Longitudinal travel (X-axis) mm 400 Transverse travel (Y-axis) mm 315 Vertical travel (Z-axis) mm 350 Vertical milling spindle Spindle holder DIN 2080 ISO 40 Spindle speeds rpm 80 - 3,000 Pivoting degrees +/- 45 Quill stroke, manual mm 80 Feed rates Rapid traverse (X/Y/Z) m/min 5 / 5 / 2.5 Feed rate (X/Y/Z) mm/min 2,000 Drive power Total power kW 7.5 Machine dimensions and weight Length mm 1'520 Depth / width mm 2,130 Height mm 1'950 Weight kg 1'700 Cpjdpfeu Tfgxjx Ac Nju

Condition: excellent (used), Year of construction: 2009, CNC control : FANUC 160i - Accessories available. - Fanuc loading robot - Coolant system (Edge 2 tower from ARO-Technologies) - Oil mist separator (ELBARON SA) Travels: X-axis 650 mm Y-axis 300 mm Z-axis 300 mm Cpodpjr Ha Dvefx Ac Nou C-axis swivel angle +150°/ -60° C' axis swivel angle +/- 180° Grinding spindle: Wheel dimensions up to 250 mm Speed 0 - 10,000 rpm. Max. spindle power 26 kW HSK 80 holder Max. Number of disks 6 Workpiece headstock Vmax 180°/s Drive power 1.6 kW ISO 50 mounting Precision (resolution) Resolution linear axes 0.001 mm C-axis 0.001° Dimensions: Length 3100 mm Width 1915 mm height 2190 mm Weight 8'500 kg

Condition: used, Automatic Platen Die Cutter Joh. Cietz PRESTO Halbautomatischer Stanztiegel / Automatic Platen Die Cutter Joh. Cietz PRESTO Year 2008 - Serial-No. EP51568 Format 370 x 480mm Weight 1100kgs Included frame and tools Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Cpjdpfsyfxaxox Ac Nju

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, For sale is a functional CENTURY MWZ1650Q automatic die-cutter with automatic feeding and a stripping section, ideal for efficient corrugated board processing. The machine is in continuous production and ready for immediate use. Specifications and Features: ● Model: CENTURY MWZ1650Q ● Year of Manufacture: 2012 ● Run Count: Approximately 2.7 million impressions (low usage, machine in continuous production) ● Condition: Functional, in continuous production ● Max. Sheet Size: 1650 x 1200 mm ● Min. Sheet Size: 650 x 450 mm ● Max. Cutting Size: 1630 x 1180 mm ● Max. Mechanical Speed: 4200 sheets/hour ● Optimal Operating Speed: ○ Minimum: 1400 sheets/hour ○ Maximum (tested by us): 5600 sheets/hour (depending on the type of material being die-cut and stripping requirements) Cpodpfx Ajwmwdaoc Nsu ● Minimum Waste: 14 mm ● Power Supply: 45 kW (electrical schematic available) ● Corrugated Board Cutting: E, B, C, EB, BC flutes Construction and Equipment: ● Automatic feeding ● Stripping section ● Delivery of blanks onto a roller table ● Machine Dimensions (machine itself): ○ Length: 10 m ○ Width: 4 m ○ Height: 2.56 m ● Dimensions with operator platform: ○ Length: 11 m ○ Width: 5.5 m ○ Height: 2.56 m ● Weight: The central part is the heaviest, over 60 tons, plus lighter components. ● Technical and Operating Documentation: Available (not in Polish) ● Machine foundation diagram: Available

Condition: used, Production capacity: 3000kg/h Total power: 11kw material channel width: 540mm Material channel height: 240mm Cpjdpexuliwjfx Ac Nou Cylinder stroke: 700mm Gas source pressure: 4-6 kg/cm 2 Processing raw material meat specifications: 700 × 520 × 200 (mm) Weight: 800kg External dimensions: 2150 × 1030 × 1220 (mm)

Condition: like new (used), Year of construction: 2018, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 96614, power: 1 kW (1.36 HP), compressed air connection: 6 bar, "BARGAIN" Due to business closure, all carpentry machines are being sold. Cjdpfx Acjyg Ib Ij Nspu Among others, the following machine, which has only been used for testing purposes: Portable and flexible bench machine, mills a dovetail groove per cycle for dovetail sizes W. Function: Set stops to size and insert workpiece. Pressing down the handle clamps the workpiece. At the same time, the milling unit moves to the preset milling depth. Lifting the handle releases the milled part, and the motor shuts off automatically. Done! Technical Data: Electrical connection: 1ph/N/PE 230 V 50/60Hz 1.0 kW Motor: 1 x 1000 W No-load speed: 34,000 rpm Control: manual Workpiece clamping: manual Passage height: 130 mm Milling depth: 0-85 mm Extraction nozzle: Ø 50 mm Dovetail size: W Dimensions (W/D/H): 740/650/835 mm Weight: 32 kg

Condition: used, Letter Press Cylinder DIE Cutter Heidelberg KSB Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg KSB Year 1962 - Serial-No. KSB 308003 Papierformat / Size min. 125 x 150mm - max.: 400 x 570mm Druckgeschwindigkeit / Speed min. max. 5.000 sph Punching pressure: 60T Codpeyfhthofx Ac Nopu Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include fram Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Format: 600 x 500 mm Equipment: Krause autofeed die cutter Max. Size: 60 x 50 cm (23 x 19 inch) Codpfxevfx Ulo Ac Njpu

Condition: good (used), Tool sharpening machine with wet grinding. Codsich Elopfx Ac Nspu

Year of construction: 1989, condition: excellent (used), Offer without obligation Automatic Diecutting Machine Make: BOBST Autoplatine Model: SP-130-E Format: 1,300 x 920 mm Year of manufacture: 1989 Technical Data: - Maximum format: 1,300 x 920 mm - Minimum format: 580 x 450 mm - Material: Paper/Cardboard: 80 – 1,000 g/m² Cardboard: 250 – 2,000 g/m² E+B Flute: max. 4 mm - Cutting Pressure: 500 t - Maximum Speed: 7,000 sheets/hour - Automatic diecutting machine with stripping station - Automatic high-pile feeder Cpedpfxjygv Ice Ac Neu - High-pile delivery - Diecutting plates - Frames - Quick-action frame change system - Complete with accessories - Machine is in working order and in good condition - Video available on request Price: Upon request Delivery: FCA Availability: Immediate

Condition: excellent (used), SUDA FC 1530 Steel Laser Cutter Material / Metal Laser type / Fiber laser Cutting area / 1500 x 3000 mm Cutting thickness / depends on the processed materials Laser source brand / RAYCUS RFL-C1000 Operating mode / continuous wave Configuration / 3-axis Supported cutting products / sheet metal and tube Cooling / air and liquid cooled using S&A CWFL-1000 chiller Cutting speed / depends on the material type Supported graphic formats / AI, PLT, DXF, BMP, DST, DWG, LAS, DXP CNC / yes Laser head brand / WSX Servo motor brand / Schneider Guideway brand / THK Control system brand / Cypcut Control system Operating system / CYPCUT system Power supply / 1000W Laser wavelength / 1080nm Working area / 1500 x 3000 mm Positioning / red dot pointer Height: 1850 mm Width: 2111 mm Cpjdpfsvkf Rdsx Ac Neu Length: 3450 mm Weight (kg) / 2500 kg The offer concerns a SUDA FC 1530 steel laser cutter + S&A CWFL-1000 chiller. !The sheet metal straightener is listed in a separate auction!

Year of construction: 2007, condition: used, functionality: fully functional, We offer this used Reich PB 520 3 pallet cap cutting machine, year of manufacture 2007. 3-blade model, high production capacity up to 8 pallets/min, currently in operation. Cpedpfx Asygr Tbjc Nsu Complete with cap positioner that rotates caps in all directions. Positioner for placing caps onto the nailing carriage of the original Omev machine. Similar to Corali, Omev, Storti, and CMS Scarpari models. Model: PB 520 3 Serial number: 020 Year of manufacture: 2007 Air pressure: 7 bar Power: 8.8 kW Voltage V-Hz: 380-50 V-Hz If you have questions or require further information, please do not hesitate to write us a message or call us.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Codpfx Aeydkgnoc Njpu Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: good (used), Kama TS 74-60 Automatic Die Cutter Cpodpfx Acoydkgbs Nou One of the rarest models on the market. Manufactured in 2006, with a run of only 43 million sheets. Machine serviced and maintained on time. Format: 540x740mm Fully automatic, smooth speed control, central lubrication, and safety guards. Includes two frames, several hard sheets for clamping, trolleys, a tool kit, and documentation.

Year of construction: 2025, condition: like new (used), functionality: fully functional, For Sale: 4 pieces of new spiral planing heads D 140 x 240 x 40 Z=6 Cpsdoydk Tbepfx Ac Neu Used only once as a demo, now available at a special price! Act fast and secure these high-quality spiral cutterehads heads that will revolutionize your woodworking projects. Don’t miss out on this opportunity, 60% of new price

Condition: good (used), Set of 2 Leitz Heliplan Spiral Cutterheads bottom/top Cpsdpfx Ajydk Swec Nju 125 x 310 x 40 with pre-drilling, aluminum on Powerlock adapter 8000 rpm max Can also be used without Powerlock on a 40 mm spindle

Condition: used, Weinig Powerlock L=240 Z=2 head with rebate cutter below Type 536, diameter 93 mm 536.095.04 Centrolock reversible knife system Z2 Mounting: PowerLock HSK Length: 240 mm Cpedpfxjydk Ryj Ac Neu Price: 500 Euro

Condition: excellent (used), Professional Ø100 mm x 6 mm disc milling cutter with indexable inserts mounted on an SK40 arbor – Made in Germany. Ideal for fast and precise slotting, cutting, and side machining of steels, cast iron, aluminum, and other structural materials. The cutter is equipped with multi-edge inserts – ensuring high machining performance and long tool life. The set is in good working condition, ready for immediate use on a CNC machining center. • Cutter diameter: Ø100 mm • Cutting width: 6 mm • Indexable inserts • Mount: SK40 taper • Condition: used – 100% functional • Manufacturer: Made in Germany. Cjdpoxllclofx Ac Njpu

Condition: excellent (used), functionality: fully functional, Format 880/640, pneumatic clutch Cedpoygl Uljfx Ac Nepu