Tool cutter

Deckel FP4 MK CE Konform

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, OKAMOTO ACC-16*24SA1 Precision Surface Grinding Machine Okamoto Precision Surface Grinding Machine ----- Model ACC-16•24SA1 Automatic Wheelhead Approach, Retraction to Start Position, Automatic Dress Cycle with Wheel Wear Compensation, Shift Plunge Cycle--- ----- Grinding Capacity 16”x 24” Standard Accessories • Automatic Overhead Wheel Dresser • Touch Screen Controller with 10” Display With Compensation, including Diamond Tool • Vertical & Crossfeed Pulse Generator • Rapid Wheel head Retraction • Teach-Input Positioning • Load Meter for Grinding Wheel Motor • 5 HP Wheel Spindle Motor • Shift-Plunge Rough Grinding Cycle • Stainless Steel Wheel Guard • Selectable Rough/Fine Infeed Grinding Method • Leveling Bolts with Plates • Table Park for Safety • Necessary Tools & Tool Box • Stainless Steel Splash Guard • Installation and Training Dcjdezmhknepfx Albjl • Instruction Manual

Condition: reconditioned (used), Product information "Voest Alpine DA 160" Voest lead and feed spindle lathe Model DA 160 Condition: Refurbished Technical data Center height: 165 mm Distance between centers: 650 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 190 mm Dcjdpfx Asy Ndqrelbsl Bed width: 210 mm Lead spindle diameter: 25 mm Chuck diameter: 160 mm Tailstock spindle: MK 3 Spindle speed (16): 30 - 2500 rpm Motor power: 2 / 2.4 kW Quill stroke: 100 mm Dimensions (L x W x H): 1500 mm x 900 mm x 1650 mm Equipment: - Geometry report - 3-axis digital display, Sino brand - NEW - 3-jaw chuck - Emergency stop button - Quick-change tool holder system Multifix, number of holders 6 - Machine light NEW - Bed stop - Coolant system NEW - Drill chuck with taper shank - Follower point - Lead and feed spindle cover NEW - Chuck guard, limit switch secured - Operating tool - Operating manual - Machine feet

Condition: excellent (used), Year of construction: 2001, turning diameter over cross slide: 1,600 mm, turning length: 6,000 mm, turning diameter: 1,300 mm, spindle motor power: 100,000 W, total height: 2,875 mm, total length: 9,550 mm, total width: 2,950 mm, workpiece weight (max.): 40,000 kg, Swing over bed Ø 1600 mm Swing over cross slide Ø 1300 mm DBC Turning Length 6000 mm Dcedoymk E Aopfx Albjl Spindle power 100 kW Tailstock spindle Ø 280 Ø Stroke pinole 200 mm Workpiece weight 40000 Power 125 A Speeds / ranges 250 Rpm Dimensions (Estimate) Length 9550 mm Width 2950 mm Height 2875 mm Weight 41000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2007, operating hours: 5,217 h, turning length: 285 mm, spindle bore: 91 mm, travel distance X-axis: 1,000 mm, travel distance Z-axis: 285 mm, spindle motor power: 26,000 W, total height: 2,200 mm, total length: 3,200 mm, total width: 2,300 mm, overall weight: 6,600 kg, CNC Lathe MAZAK - QTN 300-II MACH-ID 9480 Make: MAZAK Type: QTN 300-II Control: Mazatrol Matrix Nexus Year: 2007 No Tailstock Automatic doors Tool eye Chip conveyor Max. turning Ø:830mm X-Axis: 1000mm Z-Axis: 285mm Spindle bore: 91mm Dodpfx Aoyyxlfelbscl Speedrange: 5000Rpm Spindle power: 26kW Hours: 5217H Length: 3200mm Width: 2300mm Height: 2200mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop Djdpfxowrm Dtj Albjcl >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: ready for operation (used), Year of construction: 1998, table mounting size: 765 x 400 mm movements x/y/z: 650/410/510 mm spindle taper: BT 40 min./max. distance table/spindle: ca. 90/690 mm spindle turning speed range: 80 - 8000 rpm number of tool positions: 20 pieces carriages: ca. 30 m/min rapid move: ca. 30 m/min electrical connection: 380 V, ca. 15 kVA kW space needed: 2300 x 2100 x 2650 mm weight: 4000 kg Djdpfx Aljtwy Diebecl

Condition: excellent (used), Year of construction: 2007, Universal Milling Machine, gear type, feed range X/Y/Z 500/350/400 mm, table size 800x400 mm, rotary / tilting table 600x300 mm, motor 3 KW, 18 speeds 40-2000 rpm., ISO 40, quill travel 60 mm, boring capacity Ø 40 mm, digital readout on 3 axis, automatic and rapid feeds, horizontal milling head, collant systen, halogen lamp, + round- / tilting table, dimensions 1500x1700x1750 mm, weight ca. 2200 kg; ex demonstration machine Dodpefvci Eofx Albjcl

Condition: like new (used), Centerless grinding machine ESTARTA 301 CNC Dcsdpfsxfqzmsx Albjl

Condition: good (used), Year of construction: 2005, operating hours: 32,870 h, functionality: fully functional, machine/vehicle number: 6030578, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, We offer for sale Traub TNL26K automatic cnc lathe. Machine is connected to power and can be inpected every time by prior appointment. Year of built: 2005 Spindle passage 32mm Main spindle: 6.7/10.7kW; 8000rpm Counter spindle: 6.7/10.7kW; 8000rpm Upper turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24kW Dedpfjvldx Ajx Albscl Barfeeder: FMB Turbo 5-42/4200mm Swarf conweyor: Knoll 240 S1/100 Coolant Kompaktbandfilter: Resy Machine is sold with a lot of toolholders not driven and driven - list on attached photo.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Dcjdpfxsu Tuk He Albsl Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.