Used Round Rod Milling Machine for sale (98,457)

Condition: ready for operation (used), Year of construction: 1999, General Data Measurements height 2860 mm Machine weight 3800 kg Control Unit Brand MITSUBISHI Main Drive Spindle speed range 12000 rpm Spindle motor power 7.5/5.5 kW Tool taper 7/24, No. 40 Movement X-Axis Movement 510 mm Y-Axis Movement 510 mm Z-Axis Movement 510 mm Table Number of tslots 5 Table load 350 kg Kjdpfx Afsxpytasiodu Tools Number of index 25 Max weight 6 kg Max tool diameter 100 mm Max tool length 250 mm Media Power consumption 22.5 kVA Additional Equipment APC (Automatic Pallet Changer) - Only for CV-500A (APC): Number of Pallets: 2 Pallet Change Method: Front rotation This 3-axis MORI SEIKI CV-500 was manufactured in 1999. Ideal for precision CNC milling, this machine maintains robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the MORI SEIKI CV-500 machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Kedov Ai N Uepfx Afiedu Storage location: Nattheim

Condition: used, CNC Travelling Column Drilling and Milling Machine ANAYAK Type HVM-3800-P Bed milling machine, design similar to a plate boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 Travel (X/Y/Z): 3200 mm / 1200 mm / 1500 mm Table size: 3800 x 1200 mm T-slots: 8 pieces, 22 mm width, 130 mm pitch Table load capacity: max. 25 tons (fixed table - virtually unlimited load) Spindle taper: ISO 50 (DIN69871-A) (drawbar DIN 69872-B) Spindle speed: 60-4,000 rpm, infinitely variable Feed rate: up to 10,000 mm/min, infinitely variable Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Power supply: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head, fully automatic swivelling in two 45° planes - B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless measuring probe (probe and receiver not included) - Additional HF spindle 18,000 rpm - for mounting - Free-standing electrical cabinet - Chip conveyor positioned between the travelling column bed and machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic power unit - Operating manuals with circuit diagrams Machine footprint: L x W approx. 1,000 x 700 cm Machine height: approx. 410 cm Weight (complete): approx. 33 tons Good condition Kdodpfsxcgtgsx Afieu Available immediately, ex location Kassel, loaded free of charge

Condition: good (used), Year of construction: 2009, x-travel 760 mm y-travel 350 mm z-travel 500 mm Kdodpfoxpxt Eox Afisu Table dimensions 1300 x 320 mm feed - longitudinal/cross 0-3000 mm/min feed range - vertical 1200 mm/min spindle taper ISO 40 spindle turning speed range 55-3000 U/min diameter of quill 90 mm spindle stroke 90 mm total power requirement 7,5 kW weight of the machine ca. 2,3 t dimensions of the machine ca. LBH 2,2 x 1,8 x 2,0 m Includes HEIDENHAIN ND 780 position readout Includes automatic tool clamping Includes counter bearing Includes work light Includes tool holder studs Includes automatic central lubrication Includes coolant system (pump/reservoir missing) Includes documentation Digital display for feed without function

Condition: excellent (used), CATALOG NO. 5992 TECHNICAL DATA Milling machine - Spindle diameter: 30mm - Spindle height: 120mm - Interchangeable, lockable spindle - Height adjustable (up/down) - Original cast iron fence with full adjustment - 4 spindle speeds + forward/reverse - Table dimensions: 1140x910mm - Motor: 4kW Circular saw - Max blade diameter: 270mm - Spindle shaft: 30mm - Height adjustable blade (up/down) - Blade guard - Cutting width at fence: 370mm - Cast iron table - Motor: 1.85kW - Dimensions (L/W/H): 1070x1450x1040mm - Weight: 662kg Net price: 6900 PLN Net price: 1620 EUR depending on exchange rate of 4.25 EUR (Prices may change with higher fluctuations) Ksdpfx Afsw Emvcoiodu

Condition: excellent (used), Year of construction: 2002, Immediately available from ongoing operation Precise, high-quality, stable CNC BED MILLING MACHINE MAKE: REIDEN (CH) MODEL: BF 5 Z CNC HEIDENHAIN TNC 530 (UPDATE) Travel X-axis: 4000 mm Travel Y-axis: 1000 mm Travel Z-axis: 1500 mm Automatic tool changer: 40 positions Working table T-slots (H7): 4000 x 1000 mm Milling head ASK-2 with B-axis Main motor power AC: 24 kW Kodpexpvacjfx Afijdu Tool taper: SK 50 Spindle speed, gear steps: up to 5,000 rpm Feeds x, y, z: 2–8,000 mm/min Internal coolant supply: 20 bar Machine weight approx.: 24,000 kg Equipment: - Electronic hand-wheel HEIDENHAIN - Hydraulic counterweight system - Working table surface ground - Chip conveyor - Internal coolant through spindle (IKZ) - Air blast through spindle center - 3-step gearbox - CNC main board replaced - Sliding doors on machine bed (2) The machine is well maintained and fully operational – high accuracy UNDER POWER – AVAILABLE FOR INSPECTION ON REQUEST: DISMANTLING, LOADING, AND DELIVERY POSSIBLE Subject to prior sale.

Year of construction: 2002, operating hours: 45,709 h, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC 430B Movement X-Axis Movement 3000 Y-Axis Movement 1600 Z-Axis Movement 1500 Kdjdpfx Ajxpypzofieu This 6-axis SACHMAN TRT 314 HS was manufactured in 2002 and features a 40-position SK 50 tool changer, internal coolant supply, and a 2-position pallet changer. It boasts a table size of 2,000 x 2,000 mm and an adaptable high-speed spindle reaching 30,000 rpm. Control is managed via Heidenhain TNC 430 B digitised. If you are looking to get high quality milling capabilities consider the SACHMAN TRT 314 HS machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Balestrini linear milling machine Two milling units Kodpfx Afevt Ayneiodu Milling height max 100mm Milling length max 1500mm Work on copiers Two feed speeds 4 pneumatic material clamps Milling unit motor power 2x4kw

Condition: ready for operation (used), Year of construction: 1971, large table, size: 420 x 800 mm Table longitudinal travel automatic and manual: 490 mm Table vertical travel automatic and manual: 370 mm Spindle head cross movement automatic and manual: 290 mm Kedpexpuv Nofx Afijdu Quill adjustment manual: 100 mm Spindle taper: ISA 40 18 spindle speeds: 40 - 2000 rpm 18 feeds: 11 - 500 mm/min Rapid traverse: 1.5 m/min Drive motor: 380 V, 3 kW Weight: 1010 kg Required space: 1400 x 1350 x 1780 mm

Condition: excellent (used), Working travels 400 x 210 x 340 mm Kdsdpfxjxpubrj Afieu Table size 600 x 400 mm Spindle taper ISO40 Spindle speeds 40-2000 rpm digital read-out Misc accessories MARCELS MASCHINEN CH

Condition: good (used), Universal milling machine Ernault Somua Travels: X 900 mm Ksdpfxew Tyhyj Afisdu Y 300 mm Z 380 mm Table size: 1600x370 mm Spindle speed: 32–2000 rpm 2-axis Heidenhain digital readout Machine weight approx. 2.5 t The machine is fully functional and ready for immediate use. Price net, loaded free on truck from warehouse.

Condition: used, Year of construction: 1985, Table length: 2500 mm Kdedjw Aihpopfx Afiou Spindle adjustment travel: 120 mm Table width: 760 mm Design: tiltable Tilting angle forward: +45° Tilting angle backward: -5° Extendable frame support: Yes Speed selection: belt change + pole switching Spindle taper: MK 5 Column material: cast iron Control panel position: top Spindle height adjustment: handwheel and electric Spindle tilt adjustment: handwheel with dial gauge Spindle locking: manual Spindle braking: electric Spindle rotation direction: left/right Motor power: 4.7 / 5.7 kW Table opening closure: insert segment Fence jaw design: Aigner jaws Fence adjustment: manual Milling fence scale display: analog scale Cutter jaw adjustment: manual Power feed: yes, 4 rollers (Haffner) Feed adjustment: fixed speeds Dimensions: 2500 x 1500 x 1900 mm Location: Nattheim

Year of construction: 2000, operating hours: 25,616 h, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC430 B Main Drive Number of axis 3 Kodpfx Afjxpyndeiedu Movement X-Axis Movement 3000 mm Y-Axis Movement 1400 mm Z-Axis Movement 1500 mm This 3-axis SACHMAN T22 HS was manufactured in 2000 and features a Heidenhain TNC 430 B digital control, a 20-fold tool changer SK 50, and a table size of 3,000 x 1,400 mm. It includes an adaptable high-speed spindle capable of 30,000 rpm and a travel range of X=3,000, Y=1,400, Z=1,500 mm. Consider the opportunity to buy this SACHMAN T22 HS Bed Type Milling Machine. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2017, turning length: 500 mm, spindle motor power: 30,000 W, General Year of manufacture: 2017 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 500 mm Maximum cutting radius mm 200 Stroke over center mm 25 Maximum clamping diameter mm 100 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 602 Longitudinal stroke Z-/W-axis mm 602 / 602 Cross stroke X-axis mm 140 Cross stroke X-/U-axis mm 140 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 230 Tool holder Quick-change system Bearing diameter of tool drum Kdsdewgndkspfx Afiou in the front bearing mm 660 * 790 Chuck holder Cylindrical mm 180 Chuck diameter up to mm 260 Workpiece spindle bearing diameter in the front bearing mm 170 Guidance system for machining units Rolling guides with rollers, size 45 Feed drives Cross slide adjustment W-axis, Z-axis 100% duty cycle Nm 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm 18 / 18 Steady Z3-axis 100% duty cycle Nm 10.5 Vise right Z4-axis 100% duty cycle Nm 10.5 Circular feed workpiece C21- axis, C22-axis 100% duty cycle Nm 18 / 18 Axis speed Feed/rapid traverse speed longitudinal W-, Z-, and Z3-axes m/min 0 - 40 Feed/rapid traverse speed transverse U-axis, X-axis m/min 0 - 20 Feed/rapid traverse speed Z3-axis (steady rest) m/min 0 - 40 Circular feed of workpiece C21-axis, C22-axis rpm 0 - 60 Cutter drive Power per unit (nominal / maximum) kW 15 / 30 Cutting speed m/min 120 - 255 Tool torque Nm 1500

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Condition: workshop checked Rigid milling spindle; new bearings With table extension with extendable Frame support 2500 mm Motor 5.5 kW Speeds 3000/4500/6000/8000/10000 rpm Milling stop with 2 adjustment options; one overall stop and one rear removal jaw Suction hoods 120 mm Automatic motor brake Right-left rotation With Haffner feed with 4 rollers Weight approx. 700 kg Availability: by arrangement Kdedpjw I Uinjfx Afisu Location: Flörsheim

Condition: good (used), Year of construction: 2002, Robust Tilting Spindle Moulder T 26, tiltable from -45 to +45 degrees with 2-axis position control Duocontrol Tilting spindle moulder in excellent specification A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake Forward/reverse operation Tilting angle electrically adjustable from -45 to +45 degrees Height adjustment max. 150mm, electric adjustment When adjusting the height, the correction factor for the tilting angle is shown in the upper display, which can then be set on the stop, allowing settings according to drawings Four spindle speeds: 3,000, 4,500, 6,000, and 9,000 rpm Spindle diameter 30mm, quick-change spindle with torque wrench Electrically adjustable fence, infeed jaw adjustable with handwheel and SIKO counter Manual operation of the axes or automatic positioning of height and fence Fence with lifting device can be swung away (for curved milling work) Table opening adjustable via eccentric table rings, electric adjustment Table extension on right and left with pull-out workpiece support Support can be extended by up to 700mm Table length approx. 2400mm Hinged fence for plunge routing Original Martin aluminium fence jaws with two bridges Aigner Centrex workpiece pressure device 3-roller power feed HolzHer 1117, with 8 speeds, reversible, new rollers Power feed socket, switchable from the control panel Extraction port 2 x 120mm Compressed air connection 6bar Emergency stop switch Some parts of the machine have been newly painted Approx. 7,400 operating hours Operating instructions CE marking Kdedjvv H T Rspfx Afisu Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier."

Condition: good (used), Maho MH500W2 Control: Heidenhain TNC232B Year of manufacture: approx. 1988 Spindle mount: ISO40 Spindle speed: 20-4000 rpm Feed rate: 1-3000 mm/min Table size: 700x350 mm Kdedsw Id Igspfx Afiou Coolant system Documentation Travel paths: X: 500 mm Y: 380 mm Z: 350 mm Weight: approx. 1800 kg The machine was powered up until recently and is in good, fully functional condition.

Condition: excellent (used), Year of construction: 1994, Holz Her Tilting Spindle Moulder with Holz Her Power Feeder Table extension on both sides with pull-out stop Kodpfx Aexpm Evsfijdu Swiveling spindle: Yes, -5 to +45° Height adjustment: manual Tilting adjustment: electric Fence adjustment: manual Height display: digital Tilting angle display: digital Fence position display: scale Spindle diameter: 30 mm Speeds: 1500, 3000, 4500, 6000, 9000, 12000 rpm Motor power: 5 / 6 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 1950 mm Machine depth: 1400 mm Weight: approx. 1100 kg Holz Her Power Feeder, type 1112 – 4 rollers Location: Ex stock 54634 Bitburg - Immediately available -

Condition: ready for operation (used), Year of construction: 2019, Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 10–5000 Number of axis 3 Movement X-Axis Movement 450 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Tools Type of tool holder SK40 This 3-axis EMCO Emcomat FB-450 MC was manufactured in 2019. It features a travel range of X450/Y350/Z400 mm, a fixed angle table of 800x400 mm, and a table load capacity of 450 kg. The spindle speed reaches up to 5000 rpm, complemented by a rapid traverse of 5000 mm/min. Includes a Sinumerik 828D interface with multi-touch display and a comprehensive 3-axis control package. If you are looking to get high-quality milling capabilities consider the EMCO Emcomat FB-450 MC machine we have for sale. Contact us for more information. Application Types Milling Kodexpklajpfx Afijdu

Condition: used, Year of construction: 2019, operating hours: 17,529 h, turning length: 500 mm, spindle motor power: 30,000 W, General Year of manufacture: 2017 Operating hours: 17,529 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 500 mm Maximum cutting radius mm 200 Stroke over center mm 25 Maximum clamping diameter mm 100 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 602 Kdodpfx Ajwgnigofiju Longitudinal stroke Z-/W-axis mm 602 / 602 Cross stroke X-axis mm 140 Cross stroke X-/U-axis mm 140 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 230 Tool holder Quick-change system Bearing diameter of tool drum in the front bearing mm 660 * 790 Chuck holder Cylindrical mm 180 Chuck diameter up to mm 260 Workpiece spindle bearing diameter in the front bearing mm 170 Guidance system for machining units Rolling guides with rollers, size 45 Feed drives Cross slide adjustment W-axis, Z-axis 100% duty cycle Nm 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm 18 / 18 Steady Z3-axis 100% duty cycle Nm 10.5 Vise right Z4-axis 100% duty cycle Nm 10.5 Circular feed workpiece C21- axis, C22-axis 100% duty cycle Nm 18 / 18 Axis speed Feed/rapid traverse speed longitudinal W-, Z-, and Z3-axes m/min 0 - 40 Feed/rapid traverse speed transverse U-axis, X-axis m/min 0 - 20 Feed/rapid traverse speed Z3-axis (steady rest) m/min 0 - 40 Circular feed of workpiece C21- axis, C22-axis rpm 0 - 60 Cutter drive Power per unit (nominal / maximum) kW 15 / 30 Cutting speed m/min 120 - 255 Tool torque Nm 1500

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control: SIEMENS 840D Solution Line (electrical overhaul 2017) x-travel: 7.000 mm y-travel: 2.100 mm z-travel: 1.500 mm z-travel vertical: 1.200 mm Universal milling head (orthogonal design) Swivel range of milling head holder: 340 °Grad Swivel range of milling head: 180 °Grad Mounting cone for tools with steep taper: SK50 spindle truning speed range: 22 - 2.240 U/min Feed rate x,y and z-axis: 2 - 12.000 mm/min Rapid traverse rate x,y, and z-axis: 12.000 mm/min Drive power 100% ED / 60 % ED: 31,5 / 39 kW Clamping plate dimensions of clamping plate: 6.000 x 1.500 x 300 mm Number of T-slots: 6 T-slot distance: 250 mm max. load: 10 t/m² Equipped with: NC dividing head PEISELER AWU 650 with vertical faceplate, diameter 650 mm automatic universal milling head, orthogonal, (Completely refurbished 2017, rarely used since then) Kodpfx Aexphm Uefiedu SIEMENS electronic handwheel 3 support tables various prism support blocks MAYFRAN hinged belt conveyor Coolant system with paper belt filter Work platform moving in the X direction, protective cover with viewing window The machine is in exceptionally good condition and can be viewed while under power. In 2017, a new SIEMENS 840D Solution line control system was installed, all drive motors and the control cabinet were replaced at the same time.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 52,715 h, Control Unit Brand HEIDENHAIN Model TNC 430 Main Drive Ksdpjxpkmkofx Afiodu Number of axis 5 Movement X-Axis Movement 800 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm A-Axis Movement +90° to -90° C-Axis Movement 360° Additional Equipment measuring probe not included This 5-axis Hermle C 800 U was manufactured in 1998. A CNC universal milling machine featuring a swivel rotary table with a 280 mm diameter, it operates with a Heidenhain TNC 430 CNC and a spindle cone of SK 40. With 67,073 operating hours, it remains in good condition. If you are looking to get high-quality milling capabilities, consider the Hermle C 800 U machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2006, functionality: fully functional, Description Headstock and tailstock manually adjustable. Ideally suited for machining one crankshaft type with different strokes. Workpiece Max. center-to-center distance of the outer main bearings: 920 mm Max. roll arm length (½ stroke + counterweight radius): 195 – 270 mm Max. number of machineable bearings: 8 main bearings, 6 pin bearings Main bearing diameter, min. / max.: 30 / 88 mm Pin bearing diameter, min. / max.: 30 / 84 mm Bearing width, min.: 18.5 mm Stroke, max.: 140 mm Bearing pitch, min.: 29.5 mm Deep rolling machines Max. deep rolling force: 30,000 N Headstock Main drive motor power: 20 kW Deep rolling speed: 120 rpm / 60 rpm Leveling rolling speed: 30 min¯¹ Machine Weight including auxiliary units: approx. 13,800 kg Kdodewm Elfjpfx Afiou Dimensions including integrated control cabinet and hydraulics (L/W/H): approx.: 4.5 x 2.5 x 2.2 m Max. machining height: 1,100 mm

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x- travel: 290 mm y-travel: 170 mm z-travel: 310 mm Milling spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40-2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 mm dimensions: 1066 x 1048 x 1330 mm Kdsdpfx Afoxphmueieu

Condition: used, Year of construction: 2019, operating hours: 17,349 h, turning length: 500 mm, spindle motor power: 30,000 W, General Year of manufacture: 2017 Operating hours: 17,349 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 500 mm Maximum cutting radius mm 200 Stroke over center mm 25 Maximum clamping diameter mm 100 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 602 Longitudinal stroke Z-/W-axis mm 602 / 602 Cross stroke X-axis mm 140 Cross stroke X-/U-axis mm 140 Steady Z3-axis depends on the chuck Workpiece C21/C22 axis degrees 360 Tool Outer diameter mm 230 Tool holder Quick-change system Bearing diameter of tool drum in the front bearing mm 660 * 790 Chuck holder Kdsdpfx Aswgnfusfiou Cylindrical mm 180 Chuck diameter up to mm 260 Workpiece spindle bearing diameter in the front bearing mm 170 Guidance system for machining units Rolling guides with rollers, size 45 Feed drives Cross slide adjustment W-axis, Z-axis 100% duty cycle Nm 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm 18 / 18 Steady Z3-axis 100% duty cycle Nm 10.5 Vise right Z4-axis 100% duty cycle Nm 10.5 Circular feed workpiece C21- axis, C22-axis 100% duty cycle Nm 18 / 18 Axis speed Feed/rapid traverse speed longitudinal W-, Z-, and Z3-axes m/min 0 - 40 Feed/rapid traverse speed transverse U-axis, X-axis m/min 0 - 20 Feed/rapid traverse speed Z3-axis (steady rest) m/min 0 - 40 Circular feed of workpiece C21- axis, C22-axis rpm 0 - 60 Cutter drive Power per unit (nominal / maximum) kW 15 / 30 Cutting speed m/min 120 - 255 Tool torque Nm 1500