Used Rolling Hollow for sale (6,520)

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: M14L/8402, Offer Number: M14L/8402 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MENN Type: GW83L Constr. year: 1987 diameter range: 4-12 mm shaft length under head: 150 mm max. thread length: 105 mm Isdpfx Adewi S A Nensa output pieces/min: 80-260 Location: In our warehouse

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm Ijdst Hw D Djpfx Adnoa total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Klingelnberg ZW 301 Gear Measuring Machine with Evaluation Computer Double-flank gear measuring machine with 4-position indexing table - Spur gear - Internal gear - Gear shaft - Computer (evaluation via industrial PC with fully automatic parameter calculation, quality determination, and classification) Workpiece data: Table load including fixture, max. 100 kg Load on support plate/vertical slide including fixture, max. 80 kg Workpiece knife with counterholder on measuring and feed slide, max. 300 mm Iodpev Ic R Aefx Adnsa Workpiece knife with counterholder on machine bed, max. 300 mm Device data: Heidenhain LIF 101 position measuring system Center distance min./max. 45/300 mm Table diameter 150 mm Table height above floor 950 mm Measuring pressure min./max. 5/30 daN Total connected load of the test device: 0.75 kVA Total space requirement: LxWxH 1900 x 1200 x 2200 mm Net weight: 750 kg PC, as well as some master wheels with common modules. Weight: 750 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Size Thread Height Number of Sets Manufacturer TR4 M8x1.25 H63 Duplex 2x RSK TR1 M5 H38 Duplex 2x HP TR2 M5x0.8 H54 Duplex 1x HP TR2 M5x0.8 H52 Duplex 1x Profiroll TR3 M6x1 H58 Duplex 2x RSK Iedpfxsw If Uuo Adnea TR2 M6x1 H48 Duplex 1x Hilgeland TR2 M6x1 H14 Duplex 1x HP TR4 M8x1.25 H30 Single 3x RSK Schabenut TR2 5x25 Single 1x RSK Coarse thread TR2 M6 H30 Single 1x RSK Schabenut TR3 M8x1.25 H58 Duplex 1x RSK TR3 M10x1.50 H58 Duplex 2x HP TR4 M10x1.50 H25 Duplex 1x RSK TR3 M8x1.25 H65 Duplex 1x HP TR2 M48x1.25 H48 Duplex 2x RSK For sale as a complete package or individually at the lowest price.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, Production unit for 1m stainless steel tubes. Minimum diameter: 80mm. Automatic stainless steel sheet feeding table with suction cups. Sheet centering device. Iedpfxewa Dhfj Adnoa Automatic tube rolling and injection. NEXUS CNC control. Supplied with 10 forming rollers for various diameters. Machine manual

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 109 956, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, TECHNICAL DETAILS Workpiece Rack Length: max. 610 mm Workpiece Diameter: 38 mm Module Range: 0.3 – 1.3 Max. Slide Stroke: 1130 mm Max. Rolling Bar Length: 915 mm Max. Profile Outer Diameter (Standard): 50 mm Max. Profile Width (Standard): 125 mm Gear Cutting (Rollability): 0.3–1.25 Machine Cycle Times Tailstock forward (approx. 300 mm stroke): 1.0 s Rolling bars forward: 4.2 s Tailstock return (approx. 300 mm stroke): 1.5 s Rolling bars return: 4.8 s Loading/Unloading (manual): 5 s MACHINE DETAILS Weight & Dimensions Total Weight (without automation): 12,200 kg Overall Width: 5,014 mm Machine Width: 3,104 mm Depth without cantilever: 2,564 mm Depth with cantilever: 4,166 mm Hydraulic System Hydraulic Tank: 1,000 l Hydraulic Operating Pressure: 80 bar Electrical Equipment Operating Voltage: 400 V / 3 phases Frequency: 50 ±1 Hz Coolant System Tank Capacity: 260 l Pump Pressure: 3 bar Iodpfx Ajwx H R Tsdnoa Pump Flow Rate: 24 l/min Cooling Water Supply for Hydraulic Tank (Quantity): 10 l/min Cooling Water Connection for Hydraulic Tank (Temperature): 20 °C EQUIPMENT Full enclosure included Tailstock included Hydraulic system included Oil system included

Condition: used, Year of construction: 1973, functionality: fully functional, machine/vehicle number: M14L/8559, Offer Number: M14L/8559 Iodpfx Aswi Sxwsdnja Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MENN Type: GW62 Constr. year: 1973/92/23 diameter range: 3-8 mm shaft length under head: 80 mm max. thread length: 55 mm output pieces/min: 300 Location: In our warehouse

Condition: used, Year of construction: 2001, pressure 0,2-40 t max. workpiece diameter 70 mm threading length 120 mm Control total power requirement 29 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m Iedpfot Hw N Tsx Adnoa

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC Thread, Gear, and Profile Rolling Machine Model ROLLEX 1 Substructure: The substructure of the thread and profile rolling machine consists of welded steel profiles, partially covered with sheet metal. The space for the process lubricant reservoir is located in the front area of the substructure. Main drive: The main drive generates the rotary motion of the rolling tools required for gear rolling. The drive motor is flanged to the base plate of the rolling spindle bearing via the Cyclo Drive gearbox. The rotary motion is transmitted to the rolling spindle via the Schmidt coupling. The machine operates in a speed range of 0 to 30 rpm, with this range further subdivided into 0 to 20 rpm for continuous operation (S1) and 20 to 30 rpm for intermittent operation (S4). The speed is continuously adjustable using a frequency converter. Isdpsv Uxq Sefx Adnea Brand PROFIROLL Type ROLLEX 1 Year of manufacture 2003 Control, Brand, Type Siemens, Sinumerik, 840D Motor power (kW): 18 kW Electrical connection: 400 V Rolling range: Max. rollable workpiece diameter: 40 mm Rolling carriage stroke: 2 x 80 mm Min. / max. center distance of rolling spindles: 160 / 320 mm Rolling spindle height above the machine bed: 160 mm Max. tool diameter: 250 mm Rolling spindle mounting diameter: 120 mm Rolling spindle mounting length: 80 mm Power & Drive Max. rolling force: 100 kN Rolling spindle speed, continuously variable 0-30 rpm Motors Rolling spindle drive: 2 x 13 Nm Hydraulics 50 Hz: 5.5 kW Process lubrication 50 Hz: 0.1 kW Central lubrication 50 Hz: 0.06 kW Temperature range: +5–+40 °C Current type/frequency: 3 N/50 Hz Nominal voltage: 400 V Control voltage: 24 V Auxiliary voltage: 24 V/230 V Connected load: 18 kW Nominal current of the machine: 39 A

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: MATRICOLA NR 1155-06, working width: 1,200 mm, type of input current: three-phase, total width: 4,000 mm, total length: 12,000 mm, total height: 3,000 mm, stack height: 1,500 mm, overall weight: 13,000 kg, Sheet laminating machine with water-based glue system + dryer. Max. format 120x160. Hot knife. Automatic stacker. Overhauled in 2020: coating rollers and heating units replaced. Ijdpfxjw Hr Ims Adnsa

Condition: good (used), travel distance X-axis: 798 mm, travel distance Z-axis: 358 mm, Chip conveyor  SMW Front and Rear chuck 700 mm  Double revolver 6+8 positions Big Bore 360 mm Tailstock with power quill Tooling package included with inserts and jaws Max. turning Ø:665mm X-Axis: 798mm Z-Axis: 358mm Spindle bore: 360mm Speedrange: 500Rpm Ijdpfx Aswxb Erednja Spindle power: 45kW Pinole taper: 6Mk Stroke pinole: 230mm Quill Ø: 150mm Length: 8100mm Width: 275mm Height: 2100mm Weight: 13000kg

Condition: good (used), 990 USED manual dough roller. EXTERNAL DIMENSIONS (in cm.): - H: 120 (folded: 210), Ijdpfx Adsw Hhpgensa - W: 280 (folded: 155), - L: 121, - left wing: 135/66 - right wing: 131/65 The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: M14L/8571, Offer Number: M14L/8571 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Type: R2LSP Constr. year: 1984 diameter range: 3-8 mm shaft length under head: 150 mm max. thread length: 80 mm output pieces/min: 400 Location: In our warehouse Isdpfx Adswi Sw Hjnea

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature. Iodsfnk Ehopfx Adnoa

Condition: good (used), Year of construction: 1986, Hollow Spindle Oil Country Lathe SARO SBF 710X2000 Made in Romania Year of manufacture: 1986 Main technical data: - Max. diameter passing through main spindle: 263.3mm - Max. swing over guideways: 710mm - Max. swing over cross slide: 400mm - Max. swing in gap: 950mm - Length between centres: 2000mm - Main spindle speed range: 4 – 500 rpm - Main motor power: 22 KW - Machine weight ab. 6,3ton Isdpoumtbrofx Adnea The machine is in good condition. The electric equipment was changed with new one. For more information please contact us.

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M14L/8630, Offer Number: M14L/8630 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MENN Type: GW52 Constr. year: 1974/24 diameter range: 2,5-6 mm shaft length under head: 80 mm max. thread length: 40 mm output pieces/min: 600 Location: In our warehouse Iodpfswi Swgjx Adnsa

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: M14L/8631, Offer Number: M14L/8631 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MENN Type: GW63 Constr. year: 1987/24 diameter range: 3-8 mm shaft length under head: 80 mm max. thread length: 58 mm output - pieces/min: 250-480 Location: In our warehouse Isdpfxswi Swao Adnsa

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: M14L/8733, Offer Number: M14L/8733 Machinetype: thread rolling machine - flat die Info: with washer assembly Ijdpfx Adewi Tm Nsnoa Make: ZOM Type: ZVA10 Constr. year: 1996 diameter range: 10 mm shaft length under head: 100 mm max. thread length: 65 mm output pieces/min: 180 Location: In our warehouse

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M14L/8732, Offer Number: M14L/8732 Machinetype: thread rolling machine - flat die Info: with washer assembly Make: HILGELAND Type: FN-6/60 Constr. year: 1990 Iodpowi Szxefx Adnsa diameter range: 6 mm shaft length under head: 80 mm max. thread length: 62 mm output - pieces/min: 450 Location: In our warehouse

Condition: used, Year of construction: 1976, functionality: fully functional, machine/vehicle number: M14L/8736, Offer Number: M14L/8736 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND / ZOM Type: TR4L Ijdewi Tmvepfx Adnoa Constr. year: 1976 diameter range: 6-12 mm shaft length under head: 170 mm max. thread length: 102 mm output pieces/min: 125 Location: In our warehouse

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M14L/8792, Offer Number: M14L/8792 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: ZOM Type: ZVA10 Constr. year: 1980 diameter range: 10 mm Iodpfewi Tkusx Adnea shaft length under head: 100 mm max. thread length: 65 mm output pieces/min: 180 Location: In our warehouse

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M14L/8822, Offer Number: M14L/8822 Machinetype: thread rolling machine - flat die Make: MENN Type: GW52 Constr. year: 1974 diameter range: 2,5-6 mm shaft length under head: 80 mm Ijdpfswi Ti Rsx Adnsa max. thread length: 40 mm output pieces/min: 600 Location: In our warehouse

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: M14L/8034, Offer Number: M14L/8034 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Type: TR6V Constr. year: 1970 diameter range: 10-20 mm shaft length under head: 16-180 mm max. thread length: 105 mm Iedpfxewi Tc Rj Adnja output pieces/min: 100 Location: In our warehouse

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M14L/9004, Offer Number: M14L/9004 Machinetype: thread rolling machine - flat die Make: HILGELAND Isdpswi T U Tsfx Adnea Type: FN10/12-80 Constr. year: 2002/2024 diameter range: 6-12 mm shaft length under head: 180 mm max. thread length: 80 mm output - pieces/min: 100-330 Location: In our warehouse

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: D02I/8335, Offer Number: D02I/8335 Machinetype: thread rolling machine for nails Make: ENKOTEC Isdpfx Aowm Rtzednsa Type: TA01 Constr. year: 2013 diameter range: 1,8 - 4,2 mm shaft length under head: 32 - 105 mm thread length: 27 - 75 mm output pieces/min: 2500 Location: Germany