Used Rolling Hollow for sale (6,515)

Condition: excellent (used), functionality: fully functional, Year of construction: 1993, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 280 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 4,050 mm, working width: 4,000 mm, working height: 1,100 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, overall weight: 11,000 kg, total length: 6,000 mm, total width: 1,450 mm, total height: 1,510 mm, power: 11.03 kW (15.00 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, hardened rollers, 3 roll 4000x8 mm Plate bending machine with pre-pinch Model Famar CPI4/6 CAPACITY plate width 4000 mm Ijdoxnmb Ijpfx Adnea plate thickness 8 mm pre-bending 6 mm --- Useful rollers width 4050 mm Top roll d 300 mm Side rollers D 280 mm hardened surface of the 3 rolls position readout of the bending rollers Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on rollers for profile bending Variable speed rolling up to 5 mtr/min power electric motor 15Hp on hydraulic unit 15Hp-Voltage 380/50 safety installations with emergency stop dimension 6000x1450 x H 1510 weight 11 Ton

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, Sahinler round bending machine type IRM 2050x110 working width 2050 mm max sheet thickness 3.0 mm roller diameter 110 mm Ijdpsxnc N Usfx Adnea motor driven

Condition: excellent (used), Year of construction: 2004, year of last overhaul: 2004, 4-Hi CRM Rolling Mill Froehling Head Froehling is a very renowned brand for its reliability and robustness in the field of Rolling Mills, this 4-stage rolling mill allows precise and fast milling. Below are the features: Manufacture: - FROEHLING (Germany) - New 1969 - Upgrades 1984 and 2004 Material: - Aluminum alloys - copper - brass - low carbon steel Strip Width: - 282 (300) mm / 11.1" (11.8") Strip Thickness: - 0.15 - 1.20 mm commonly processed - 2.00 mm max thickness Coil Size: - ID - 400 mm (15.75") - OD - 1500 mm (59") Isdpsg Ryqkefx Adnsa Mill Speed: - 400 m/min (1312 fpm) Work Rolls: - Diameter - 130 mm (5.12") - Face - 340 mm (13.4") Back/up Rolls: - Diameter - 390 mm (5.12") - Face - 335 mm (13.4") Drive: - 250 kW ABB DC motors / converters - New 2004 Controls: - ABB PLC - Vollmer Automatic Gauge Control - Hydraulic AGC System - Bending system Completed with: - Uncoiler - Recoiler - Belt wrapper - unloading car - Hydraulic power units - Electrical control cabinets (2002) Many sets of work rollers and backup rollers as spare We have all electrical and mechanical drawings, Software key and everything needed to reassemble and restore the function of this machine. It was dismantled after have worked until last day. If you have any questions, please let us know Sold EXW dismantled and loaded on truck. Ready for any inspection from any customer interested in. SEND US YOUR PROPOSAL IF YOU ARE INTERESTED ON THIS MACHINE, WE WILL DO OUR BEST TO HAVE A GOOD BUSINNES TOGETHER.

Condition: like new (used), Hollow face carbide saw grinder VOLLMER model MHZ Isdpfxjhcw N Ej Adnoa

Condition: used, functionality: limited functionality, Year of construction: 2025, SHEET METAL ROLLING MACHINE W01-1.5X1300 Technical parameters Roller diameter 75 mm Roller length 1300 mm Max. sheet thickness 1.5 mm Dimensions 1750x350x1100 mm Iodpsxqff Rsfx Adnoa WARNING !!! LAST ITEM, NEW, PACKAGING IN POOR CONDITION.

Year of construction: 1997, condition: good (used), machine/vehicle number: 792-235, Offer 25370 Technical Data: - Machine for producing complete profiles from SCHÜCO - Aluminium half-shells from various SCHÜCO series. - Polyamide or polythermide insulating bars are used as connecting elements. - Angle adjustment for profiles intended for façades and skylight structures - Max. profile cross-section: - Profile depth up to 250 mm - Profile height up to 300 mm (at a maximum insulating bar spacing of 300 mm) - Working direction: right to left (not reversible) - Foiling unit - Foiling device for 3 sides on façade profiles - Straightening roller set - Infeed roller conveyor – outfeed roller conveyor Iedpfxoxph Tuj Adnea - Various profile roller sets - Pneumatic connection: 8 bar - Power supply: 2 x 400 V - Space requirement: approx. W 16,500 x H 1,250 x D 1,600 mm - Weight: approx. 2,000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: MH1500X13 MM 4 ROLL, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: ELAP, controller model: LYNX 4 AXIS, number of rollers: 4, roller (bottom) diameter: 200 mm, roller (top) diameter: 220 mm, side roll diameter: 170 mm, roller diameter: 250 mm, roller length: 1,550 mm, working width: 1,500 mm, working height: 800 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, sheet thickness stainless steel (max.): 10 mm, overall weight: 3,300 kg, total length: 2,900 mm, total width: 1,450 mm, total height: 1,300 mm, power: 4.05 kW (5.51 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 ROLL PLATE BENDING MACHINE NC 1500X 13/10MM MG SRL HYDRAULIC MODEL MH1513 MM YOM 2010 PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Technical data: Bending capacity: plate width 1500 mm thickness rolling 13 mm pre-bending 10 mm --- minimum diameter of rolling D=250 mm depending on the plate thickness and yield strength --- Rollers useful length 1550 mm Upper roll 220 mm Lower roll 200 mm Side rolls 170 mm --- Voltage 3phase 400/50 electric motor 5,5 hp on hydraulic unit --- Configuration: Rollers hardened surface high strength Rotation rollers hydraulic powered with gear units Pre-pinch load control upon the different plate thickness and yield plate strength Console electric commands joysticks and digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with memory up to 200 programs Front opening hydraulic drop-end & upper roll tilt-up to remove the round closed shells Speed slow/fast variable Safety installations with emergency stop. Instruction manuals for operation and service. Dimension mm 2900x1450xH1300 mm Iedpjxmvhusfx Adnsa Weight 3300 Kgs

Condition: new, Year of construction: 2025, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, roller diameter: 95 mm, - Capacity 1270 x 3 mm - Conical rolling - Swing-out top roll - Foot pedal operation - Brake motor - Emergency stop Iodpfxsxn Rrqo Adnoa - Documentation - 400V

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M14I/9064, Offer Number: M14I/9064 Machinetype: thread rolling machine - flat die Isdpsxnytqjfx Adnoa Info: vibratory feeder Make: MENN Type: GW62 Constr. year: 1974 diameter range: 3-8 mm shaft length under head: 80 mm max. thread length: 55 mm output pieces/min: 300 Location: Germany

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Ijdpfx Aed Nw Ttsdnea Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

Condition: ready for operation (used), functionality: fully functional, Technical Data – SENY D75B: Rolling Pressure: 220 kN Workpiece Diameter: min. 3 mm – max. 70 mm Maximum Pitch: 6 mm Maximum Groove Pitch: 2.25 mm Maximum Roll Width: 160 mm Roll Diameter: min. 133 mm – max. 170 mm Roller Shaft Rotational Speeds: 24 – 30 – 38 – 45 – 62 – 72 – 90 – 114 rpm Roll Holder Shaft Diameter: 54 mm standard – 69.85 mm special Distance Between Shafts: min. 135 mm – max. 230 mm Working Stroke: max. 15 min Feed Rate: 0.5 mm/s – 6 mm/s Rolling Time: 0.1 s – 100 s Pause Time: 0.1 s – 100 s Main Motor Power: 5.5 kW Electrical Consumption: 8.6 kW Reservoir Capacity: 130 liters Weight: approx. 2,100 kg. Iodpexm Stgefx Adnsa Additional rolls available: M4.5 x 0.75 ISO. M6 ISO. M10 ISO.

Condition: good (used), Year of construction: 1977, spindle bore: 360 mm, turning length: 2,000 mm, Oil Country Lathe Ø 970 x 2000 mm Double Hydraulic chuck Double chuck front and rear with 360 bore API Threading Cutter attachment Safety cover dfor front and rear chuck Iodpsxf E Rcefx Adnsa Conical turning carriage Multi fix tool system DBC Turning Length: 2000mm Swing over bed Ø: 970mm Swing over cross slide Ø:500mm Spindle bore: 360mm Spindle power: 22kW Stroke pinole: 360mm Spindle taper: 6Mk Speeds / ranges: 28-500Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 2000mm/min. Length: 5500mm Width: 1900mm Height: 1900mm Weight: 10600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Rolling Grain rotating high performance tip MK 5 Iedpfjiuvuqox Adnja cone tip 60 degrees diameter cone tip 58 mm diameter housing 120 mm Total length 300 mm Weight 9,5 kg

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 1800 mm Measurements depth 5400 mm Measurements height 1950 mm Iodpfxoxd Ib Ij Adnea Machine weight 8500 kg Main Drive Spindle motor power 11 kw Additional Equipment Teach-In NC control for automated bending processes (optional) Mechanical auxiliary arm for handling heavy workpieces (optional) Hydraulic side supports for stabilizing long sheets (optional) Infinitely adjustable bending speed (optional) General Data Measurements width 1800 mm Measurements depth 5400 mm Measurements height 1950 mm Machine weight 8500 kg Main Drive Spindle motor power 11 kw Additional Equipment Teach-In NC control for automated bending processes (optional) Mechanical auxiliary arm for handling heavy workpieces (optional) Hydraulic side supports for stabilizing long sheets (optional) Infinitely adjustable bending speed (optional) This Metallkraft RBM 4 HMS Pro 3050-150 plate rolling machine was manufactured in 2022. It features a robust welded construction, induction-hardened rollers, and a hydraulic drive for the upper roller. The machine includes three digital displays for precise roller adjustments and a hydraulic folding plate for easy workpiece removal. Ideal for heavy industrial use with options for conical bending. Contact us for more information about this machine. Application Types Rolling

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M14I/9063, Offer Number: M14I/9063 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Type: FL-10-80 Isdpfx Adsxnyrtenea Constr. year: 1985 diameter range: 10 mm shaft length under head: 180 mm max. thread length: 80 mm output - pieces/min: 400 Location: Germany

Condition: new, Year of construction: 2012, hydraulic linishing or polishing unit for hollow ware like cooking pots Ijdpfx Adebdnuaenoa

Condition: good (used), 082 USED Rolling machine, croissant machine, baguette machine. Automatic machine with control panel. EXTERNAL DIMENSIONS (in cm.): - height 140 (max: 150), - width 120 - length: 195, - left wing: 84/63 - right wing: 74/64 Iedswgcwrspfx Adnoa The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), functionality: fully functional, type of input current: AC, Pee-Wee Model P24US Hydraulic Thread Rolling Machine for in-feed or thru-feed rolling with helical thru-feed dies Max. rolling pressure: 24 tons Max rolling diameter: 75mm Min rolling diameter: 5mm Max rolling width: 200mm Diameter of rolling spindles: 69.85mm Max thread die diameter:210mm Variable spindle speeds: 20 -90 rpm Iedpfexl Ebhjx Adnja

Condition: good (used), Hollow spindle stroke Isdpfx Asdbc E Nsdnsa Diameter 125 mm Weight 6.6 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Automatic bending machine Co.ma.l Four Matic - 4 rolls (2 with diameter 30 mm / 2 with diameter 37 mm) - Effective bending length: 500 mm - Minimum bendable diameter: 40 mm - Automatic cycle management - Pedal operation - Digital position display Ijdpfx Adexdr Skonja Machine has been used very little and is in good preservation condition. Original documentation and user & maintenance manual are available.

Condition: used, Single-acting hollow piston cylinder with spring return ENERPAC Hydraulic ram, hydraulic cylinder, hollow piston cylinder, machine lifter, clamping cylinder Model: BRH 1003, predecessor of RCH 1003 Lifting capacity: 100 tons Operating pressure: 700 bar Piston stroke: 76 mm Piston rod diameter: 127 mm Outer diameter: 215 mm Closed height: 255 mm Through-hole diameter: Ø 79 mm Internal thread: Ø108 mm 12G" Hydraulic connection thread on cylinder: M18x1.5 - Hydraulic connection with high-flow quick-coupling type CH-604, thread M30x1.5 mm Net weight: 55 kg Isdpfsxciuaox Adnoa Very good condition 16 units available, price per unit

Condition: new, plate thickness 2,5 mm roll diameter 98 mm throat 160 mm total power requirement 1,5 kW Ijdpfjd Iimzex Adnsa weight of the machine ca. 0,35 t dimensions of the machine ca. 550x1400x1500 m Delivered with: • hydraulic version • 4 set of wheels • Foot control • Brake motor • Emergency stop

Condition: excellent (used), Year of construction: 2014, 126 USED Koenig belt dough rounder, bread rounder: model BRW 2200. Year of manufacture: 2014 EXTERNAL DIMENSIONS (in cm): - L:280, - W: 70, - H: 174 cm. - working length approx. 260 cm. EQUIPMENT: - flour duster - belt speed adjustment - belt pressure adjustment The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Iodpfx Adow Sy A Uonsa ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, Year of construction: 2025, functionality: fully functional, thread length: 12,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 90 mm, spindle diameter: 80 mm, type of input current: three-phase, roll diameter: 250 mm, spindle speed (max.): 50 rpm, spindle speed (min.): 20 rpm, total height: 2,000 mm, total length: 2,400 mm, total width: 2,000 mm, 60 ton hydraulic thread rolling machine with swivel spindles for infeed and thru-feed rolling Ijdpsv Rb Apsfx Adnsa Download PDF file for photographs

Condition: new, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm total power requirement 0,75 kW weight of the machine ca. 130 kg dimensions of the machine ca. 1,1 x 0,5 x 1,3 m Isdpfx Adofv H Edjnoa Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets