Used Rio Palisander for sale (1,009)

Condition: used, This listing is for 1 of 3 Millipore Rios-DI UV Water Puerification System RiOs-DI® 3 UV Water Systems with built-in 254 nm bactericidal UV lamp easily and economically produce up to 15 L/day of consistent-quality Type 2 pure water from tap water. A combination of reverse osmosis (RO) technology and deionization (DI) resins delivers water with high resistivity ( > 10 MΩ·cm) and low TOC (< 30 ppb) whose quality surpasses that of service DI or distilled water UV lamp helps ensure optimal water quality for bacteria-sensitive applications Pure water flow rate of >2.4 L/hr Integrated 6-L storage reservoir Avoid the drawbacks of other purification methods such high lab space demands for resin bottles or distillation equipment; heavy maintenance; lack of quality monitoring; and in the case of distillation, high energy and water use Nodpfx Aoxzhcmod Necl

Condition: used, This listing is for 1 of 2 Millipore Sigma RioS Essential 24 Water Purification Tank These units are in full working condition and is ready for immediate use The RiOs Essential 24 is a compact, efficient RO system that delivers around 480 L/day of consistent Type 3 water. It features minimal maintenance, intelligent self‑management, and smart cartridge monitoring—ideal for routine lab task Key Performance Specs Flow Rate: 24 L/hour (≈ 480 L/day) for non-critical lab uses Purity: Provides Type 3 water with ionic rejection between 95–99% and organic/particulate rejection ≥99% (MW ≥ 200 Da) Purification Process & Internal Features Progard® pretreatment cartridge: Removes particles (>1 µm), free chlorine, hardness, and colloids. High-efficiency RO membrane: Removes dissolved ions, organics, microorganisms, and particulates. Recovery loop: Recycles a portion of reject water to feed, cutting water waste by over 50% compared to conventional RO systems Temperature compensation: Automatically adjusts pump pressure to maintain steady flow across 5–35 °C feed water Design & Operation Footprint: Compact – 47 cm high × 26.8 cm wide × 33.9 cm deep Weight: Net weight ~10.9–12.1 kg; Operating weight ~14.4–15.7 kg Power: 100–230 V AC, 50–60 Hz Ncodpfsxhfpdjx Ad Nsl Feed water specs: Tap water under 2,000 µS/cm conductivity, 1–6 bar pressure, 5–35 °C,

Condition: used, Year of construction: 2014, Overview  This capsule machine was manufactured by CIRIO GERMANO in 2014. The machine has 6 heads and is designed for processing thermal shrink capsules. Technical details  Manufacturer: CIRIO GERMANO Model: MONOBLOCCO 6 TERMICHE Year of manufacture: 2014 Serial number: 14-018 Number of heads: 6 Capsule type: PVC shrink capsules Function: Automatic capsule feeding & thermal shrinking Ncodjv Tp E Ropfx Ad Njl

Condition: ready for operation (used), chuck outer diameter: 1,250 mm, controller model: E.C.S CNC 1402, empty load weight: 17,000 kg, 5000 kg maximaal op tafel Nodoxqh R Njpfx Ad Njcl KM 50 gereedschappen Max turningdia -- passage: 1400 mm Power on the spindle: 60 kW Max longitudinal travel X-axis: 2700 mm Max hight of workpiece Z-axis: 750 mm Number of speeds: 2-430 rpm - max 450 Nm Power needed: 3 x 380 V TOOLING: yes Turret: yes Qty Tools: 24 Coolant pump: yes Light: yes

Year of construction: 1993, condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical specifications: - Model: ZSK 40 - Screw diameter: 40 mm - Screw length: 7 barrels × 4 D → approx. 28 L/D - Main drive: 30 kW - Motor speed: 1,800 rpm - Screw speed: 40 – 400 rpm - Max. torque per screw shaft: 325 Nm Nedpfsycuuyjx Ad Njcl - Heating: electric, connected load approx. 17 kW - Cooling: water cooling unit - Temperature control zones: 6 zones - Barrel temperature measurement points: 6 - Material temperature measuring point: 1 - Material pressure measuring point: 1 Barrel configuration: - Feeding barrel with liquid addition port - Open barrel with insert and 2 liquid addition ports - Multiple closed barrels with ports for liquid addition or measuring points - Degassing barrel General features: - Co-rotating, closely intermeshing (self-cleaning) screws - High mixing and dispersing performance due to modular mixing and kneading elements - Modular design for screws and barrels - Drive and process sections mounted on a robust base frame Applications: - Plastic compounding - Masterbatch production - Additive and filler incorporation - Laboratory and pilot plant use - Formulation and product development Condition & operating hours: According to the hour meter, the machine has been in operation for less than one year and is therefore in excellent, almost as-new condition. The screw elements are also as new. Options & modifications: On request, we offer the design and installation of appropriate tooling, e.g. strand dies, as well as the integration of additional peripherals such as screen changers, pelletizing lines, dosing equipment or other customer-specific components. The machine can thus be individually configured according to customer requirements and delivered ready for operation.

Condition: excellent (used), Large selection of nice conveying direct from closed cheese factory. Nedsycm D Hepfx Ad Necl

Condition: used, total height: 1,200 mm, total width: 1,200 mm, total length: 4,000 mm, Empty weight: 4.000 kg - Documentation available: No - CE certificate present: No - Transport dimensions: 4000mm x 1200mm x 1200mm (l x w x h) - Transport weight [kg]: 4000kg Financial information Ncodpfx Adownib Te Njl VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Complete contents of protein powder factory which was set up in 2015. All Machinery in lovely condition. machinery includes Winkworth mixers pot and bucket filling lines, capsule and tablet counters, sieves etc. Ncsdpfow Nivljx Ad Njl

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 125 h, machine/vehicle number: 9842150, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, working width: 6,400 mm, type of crowning: CNC-controlled, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, overall weight: 5,800 kg, total length: 7,220 mm, total width: 2,080 mm, total height: 1,800 mm, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, angle stop, cone bending device, documentation/manual, emergency stop, foot remote control, A nearly new CNC folding machine from Variobend, the leading German manufacturer in this segment. Ke Dbgeyah H Def Ruewt The machine has been used only minimally and has just undergone full scheduled service. Perfect technical condition – ready for immediate operation. Njdpfx Adjyctxke Necl The machine is fully guaranteed, and official Variobend service support is always available. We are happy to personally demonstrate all machine functions on-site. After purchase, we will also provide full explanation, operator training, and hands-on instruction for you or your staff to ensure smooth and safe operation of this exceptional machine. Transport, as well as loading and unloading of the machine, can be arranged upon agreement.

Condition: used, Cut length Nedpeyac Aasfx Ad Nscl Laser line 400V

Condition: used, Year of construction: 1993, functionality: fully functional, conveyor belt length: 2,730 mm, conveyor belt width: 360 mm, conveyor belt speed: 50 mm/s, total length: 2,730 mm, total width: 490 mm, total height: 1,620 mm, power: 0.762 kW (1.04 HP), motor manufacturer: BONFIGLIOLI, Equipment: type plate available, TAF item number: 1000004806 Manufacturer: trio-technik Year of manufacture: 1993 Overall dimensions: 2,730 x 490 x 1,620 mm (LxWxH) Width including side panel: 490 mm Width including drive: 490 mm Side panel height: 80 mm Total conveyor length: approx. 2,820 mm Conveyor length, horizontal: approx. 820 mm Conveyor length, vertical: approx. 2,000 mm Conveyor width: 360 mm Belt type: PVC, cleated belt Belt width: 400 mm Cleats: H = 20 mm, cleat spacing = 400 mm Substructure: mobile, height-adjustable, max: 1,620 mm | min: 1,250 mm Drive: chain drive Motor: gear motor Njdpfx Adswgmrmo Nocl Motor data: 0.762 kW Conveyor speed: 0.05 m/s, constant Net weight: 82 kg Special features: incl. ON/OFF switch Condition: Used / fully functional Function test: OK

Condition: good (used), Year of construction: 2010, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 290 mm, conveyor belt speed: 30 mm/s, total length: 2,400 mm, total width: 650 mm, total height: 2,300 mm, overall weight: 160 kg, discharge height: 2,170 mm, power: 0.22 kW (0.30 HP), motor manufacturer: DRdrivers, Manufacturer: Trio-Technik Year of manufacture: 2010 Overall dimensions (LxWxH) in mm: 2,400 x 650 x 2,300 Width incl. side panel in mm: 400 Width incl. drive in mm: 600 Side height in mm: 200 Total conveyor length in mm: 3,100 Conveyor length, horizontal in mm: 800 Conveyor length, vertical in mm: 2,300 Conveyor width in mm: 290 Ncsdpfx Adoycr Tgo Nsl Belt type: Plastic slats / link chain belt Belt width in mm: 300 Treads (height of treads/tread pitch) in mm: 50, 360 Substructure: Rollable Height adjustable: / Sliding surface: Steel Inlet height in mm: max: 280 min: 250 Outlet height in mm: max: 2,170 min: 2,140 Drive: Head drive Motor type: Gear motor Motor manufacturer: DRdrives Motor data: 50/60 Hz, 0.18/0.22 kW, 230/270 V Motor position (in conveyor direction) left Conveyor speed in m/s: 0.03 Net weight in kg: 160 Special features: Programmable, digital cycle control, incl. CEE plug Condition: used / fully functional Function test: OK

Condition: used, Year of construction: 2005, Pre-feeder Para year 2010 N° 3 colors (one of them year 2012) Automatic Slotter Rotary die cutter Ncedpfowu E Rkox Ad Nsl Folder Gluer year 2005 Palletizer Pentatech year 2017

Year of construction: 2018, condition: as good as new (ex-display), We offer this used blast chiller from the brand CRIOCABIN, model MX-CP-1, year of manufacture 2018. theoretical cooling capacity: 4000 kg/h·K internal width: 1.80 m Ncodpfx Adoycgm Uo Njl internal depth: 2.40 m internal height: 2.72 m panel thickness: 100 mm door width: 1.10 m door height: 2.10 m number of evaporators: 1 fin spacing: 8 mm number of EC radial fans: 2 units fan diameter: 500 mm maximum air flow: 24,000 m³/h available pressure: 800 Pa total ventilation electric power: 11.5 kW refrigeration unit power: 34 HP refrigerant: R442A year of construction: 2018 If you have any questions or require more information, please feel free to send us a message or call us.

Condition: used, Used Mario Riboldi Press Brake Model: HL 150/80 Description: • Mario Riboldi hydraulic press brake, ideal for medium to heavy metal fabrication work. Technical Data: • Bending force: 150 tons • Useful working length: 8,050 mm Ncsdpfx Adex Sxyms Nsl

Condition: excellent (used), longitudinal circular saw, cutting length 6.2 m, cutting width 450 mm Ncsdpfx Adex Tv Rrj Nol

Condition: used, Diameter 48 mm Bilz thread adapter Diameter 63 mm Variolock connection Length 160 mm Total length 180 mm 2 pieces available Ncodpeb Tyqpsfx Ad Nsl

Condition: excellent (used), Prism milling cutters Make Swiss franc & Orion 90 degrees 8 x 63 mm diameter Ncjdpfedwmnpjx Ad Nel 4 x ca. 100 mm diameter

Condition: excellent (used), Year of construction: 1993, Conveyor belts TRIO - TECHNOLOGY Nedpfxjuvg D So Ad Nscl Year 1993 L.2,7 meters( 65 cm+130cm+75 cm) B. ,37 meter H. 1,30 meter

Year of construction: 2015, condition: used, For Sale: Variovac Primus – Year of Manufacture 2015 more photo's will follow soon, currently being serviced. We offer a well-maintained Variovac Primus thermoforming packaging machine, manufactured in 2015, designed for reliable and efficient food packaging applications. This machine is widely used in the food industry for vacuum and MAP packaging of fresh and processed products. Key Features - Thermoforming packaging machine - Suitable for vacuum and Modified Atmosphere Packaging (MAP) - Robust industrial design for continuous production - Hygienic construction, ideal for food processing environments - User-friendly control system - Proven Variovac quality and reliability Applications Ncsdpfx Adjyan D Ns Nsl - Meat and poultry - Cheese and dairy products - Fish and seafood - Ready meals and convenience foods - Other food and non-food products requiring high-quality packaging Condition - Year: 2015 - Good working condition - Professionally maintained - Available for inspection by appointment Advantages - High packaging quality with consistent results - Durable German engineering - Suitable for medium to high production volumes - Easy integration into existing production lines 📍 Location: Available from stock 🚚 Worldwide transport possible upon request For more information, specifications, pricing, or to arrange a viewing, please contact us. * Year: 2015

Condition: excellent (used), For sale: professional milling tool holders from the brands HOLEX (Hoffmann Group) and ORION. • Type SK40 Ø6-50 (Weldon – side screw) • Standard DIN 69871 AD – central cooling through spindle • Clamping diameter: Ø6 mm • Length: 50 mm • Balancing G 6.3 – up to 12,000 rpm (HOLEX) • Very good condition, used – fully operational • Some holders are sold with milling cutters/drills included. Nedpfjxcgzdex Ad Nocl

Condition: excellent (used), Professional set of milling and drilling tool holders with SK40 / ISO40 taper, compliant with DIN 69871 A standard. The set includes approximately 25 ready-to-use tools with mounted milling cutters and drills. Tool diameter range: from Ø4 mm to Ø12 mm – an ideal set for serial production. Holder length: 50 mm – compact and precise, perfect for CNC machining centers. The set includes various tool types: end mills, taps, countersinks, solid carbide drills, and chamfer mills. Some tools are coated – suitable for machining steel, stainless steel, aluminium, and cast iron. All holders are used and in good technical condition – inspected and ready for immediate use. Products from renowned brands: ZÜRN Germany and Orion. Option to purchase the entire set or individual items. Njdpfx Adsxldr Es Nocl

Condition: excellent (used), For sale: A set of professional SK40 tool holders in Ø12 size, brands HOLEX and Orion. All tool holders are manufactured according to DIN 69871 AD/B and are intended for CNC machining centers. Technical specifications: • Taper: SK40 • Clamping diameter: Ø12 mm • Length: 100 mm • Specification: DIN 69871 AD/B • Manufacturer: HOLEX and Orion • Condition: used, functional, in good condition (visible signs of use, do not affect functionality) Applications: • End mills Ø12 • Drills Ø12 • Countersinks Ø12 Njdpfx Adsxcy Tts Nscl

Condition: excellent (used), For sale: a complete set of SK40 tool holders in Ø10 size, brands HOLEX and Orion. Manufactured according to DIN 69871 AD/B, suitable for professional CNC machining centers. Technical data: • Taper: SK40 • Clamping: Ø10 mm • Standard: DIN 69871 AD/B • Manufacturers: HOLEX, Orion • Condition: used, fully functional, in good technical condition (visible signs of use). Applications: • End mills Ø10 • Drills Ø10 • Counterbores Ø10 Njdpfx Adjxcy S Ao Njcl

Condition: excellent (used), For sale: professional ORION milling holder – German precision and top-quality workmanship. • Type SK40 Ø8-100 K • DIN 69871 AD/B standard – central coolant supply through the spindle • Weldon clamping (side screw) for Ø8 mm tools • Total length 100 mm • Very good condition, used – fully functional • Complete with tool (milling cutter / drill as shown in the photo) Ideal for CNC machining centers and milling machines with SK40 taper. Ncedpfjxcgygsx Ad Nel