Used Resonator for sale (86)

Condition: good (used), Year of construction: 2005, laser hours: 4,029 h, laser power: 2,000 W, We offer a generator and a resonator TRUMPF TCF1. These components come from a portal 3D laser Lodpov Ic Sasfx Af Eoru

Condition: used, functionality: fully functional, Year of construction: 2013, Resonator package as shown in the picture for sale Lrjdpfoxbnigsx Af Esu

Year of construction: 1998, condition: ready for operation (used), Travel X/Y/Z: 2520mm/1550mm/300mm, max. sheet dimensions X/Y: 5040mm/1550mm, max. material thickness mild steel/stainless steel/aluminum: 12mm/6mm/3mm, max. workpiece weight: 330kg, positioning speed: 80m/min/80m/min/60mm/min, positioning accuracy: +/-0.01mm. Machine dimensions X/Y/Z: approx. 5650mm/3650mm/2100mm, weight: approx. 6600kg, operating hours: 29499h. Including Fanuc Laser-Model C1500. Documentation available. On-site inspection is possible. Lrsdpsv Ip R Asfx Af Eju

Year of construction: 2007, condition: good (used), TRUMPF TLF 4000 turbo The resonator was overhauled and replaced in 2021 as well as the Siemens control panel accessories: 2 pieces Siemens control units 2 pieces firing units Ledpeiqx Ebefx Af Eoru 1 piece laser control approx. 300 pieces of nozzles of different sizes div.lenses and mirrors as seen on the photos It is offered in such a way as on the photos is to be seen Function untested

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The resonance test bench POWER SWINGLY BigTable is designed as a two-mass oscillator. It consists of an oscillating head excited by a frequency-controlled asynchronous motor using an unbalance motor, which is arranged in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned helical compression springs on the upper crossbeam and is guided centrally. The medium-load drive is arranged in the lower part of the machine and applies the static preload with the help of a gear motor via a spindle drive. The sample space is located above the clamping table and is limited at the top by the adjustable crossbeam. The test bench is controlled by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529. Technical data: General data test bench: Total height of test bench 1840 to 2240 mm Height of machine table 1030 mm Width of test bench 800 mm Depth of test bench 1500 mm Height of sample chamber max. 600 mm (without force transducer) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum vibration path ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of test bench approx. 1880 kg Max. weight of clamping device 150 kg General data Control cabinet: Total height of control cabinet 1900 mm Height of table top 1080 mm Width of control cabinet 650 mm Lrsdevx Su Sepfx Af Eju Depth of control cabinet 700 mm Weight of control cabinet 152 kg Color RAI 9006 (white aluminum), table top midnight Conditions for the installation location: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load capacity 170 N/cm² Power supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, 2-pole, 16 A Fuse 16 A Connection and ambient conditions Mains conditions: Voltage 400 V rotating current with ΜΡ conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-term dips < 20 ms Limits for continuous interference Radio interference level A according to VDE0871 Frequency 50 Ηz ± 1% Protective earth Earthing resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2015, condition: ready for operation (used), Additional Equipment LN710 5" Servo Focus Head + LN010 5" High-Accuracy Lens (2.0 MPa) PC010 2-Pallet Changer TL322 4th Gas Line (Super High Pressure, 3 MPa) XXX001 Smart Junior (Software) with Training XXX002 Donaldson Dust Collector Lrsdexqh T Rspfx Af Eju XXX003 Set-Up Kits This Mazak SUPER TURBO-X 612 MK III G was manufactured in 2015. It features a maximum cutting area of 2000 × 4000 mm and a resonator power of 4 kW. Standard equipment includes an Automatic Nozzle Changer, Auto Calibration, and a Safety Cover. Additional features like a 2-Pallet Changer and a Dust Collector enhance its functionality. If you are looking to get high-quality cutting capabilities, consider the Mazak SUPER TURBO-X 612 MK III G machine we have for sale. Contact us for more information. Application Types Cutting

Condition: used, Year of construction: 2012, Technical details: y-travel: 1500 mm distance between columns: 2300 (Brücke) mm Beam Hour: ca. 22000 h laser capacity: 6000 W control: CNC P 8109-10-600D table length: 4500 / Auflage: mm Table width: 2300 mm operating pressure: 120hPa Waterpressure - requiered: max. 6,0 bar voltage: 400 / 50 V / Hz dimension laser device LxWxH: ca. L: 3,0 x B: 1,5 m dimension filtering system LxWxH: ca. 1,4 x 2,0 x 2,2 m dimension coolant device LxWxH: ca. 2,55 x 1,0 x 1,9 m space requirements of the machine approx.: gesamt: ca. 12,8 x 5,3 x 4,3 m Flatbed laser cutting machine Application: ind. Cutting and engraving Laser medium Co²; N²; compressed air Sheet dimensions/format 3000x 1500mm Cutting thickness: e.g. steel X5CrNi18-10 = 1 - 25mm / CNS 25mm / aluminum: 1 - 15mm (Tabb. available) Resonator - laser source ByLaser 6000W, wavelength 10.600mm, beamØ 20mm, circular polisariation Shuttle table LxWxH: 4500 x 2300 x 1000mm, load capacity 900kg, table support surface = 3200 x 2000mm Rf cooling type WKL 560, refrigerant R 407C, cooling capacity 65kW, high pressure 27bar, pump 220 l/min, fan Dedusting system, Donaldson type DFPRO6 (size approx. 1.4 x 2.0 x 2.2m) Cross conveyor by Kabelschlepp type SRF 040 (size LxW.H: approx. 3630 x 705 x 1000mm) Light barrier Sick type M 4000 Cutting bridge: Y-path 3000mm, stand width 2300mm, cutting carriage size LxWxH: 400 x 300 x 650mm Operating terminal with complete cabinet combination and manual control unit Cut Control Lodpfx Afju Nu R Ie Ejru *

Condition: used, Year of construction: 2017, operating hours: 56,681 h, laser power: 4 W, 2017 Laser cutting machine with changing table and pipe cutting function. DURMA HD-FL 3015 BH / IPG 4kW – Manufacturer: DURMA – Model: HD-FL 3015 III BH-IPG 4kW Lrjdevyhczjpfx Af Eju – Year of manufacture: 2017 – Laser source: IPG – Control system: SIEMENS + CAD software + nesting software – Operating hours: 56,681 h Technical data: – Working area: 3000 x 1500 mm – Pipe cutting diameter: Ø 12 – 400 mm – Laser power: 4000 W (fiber laser) Maximum thickness parameters of cutting materials: – Black steel: up to 12 mm – Stainless steel: up to 10 mm – Aluminum: up to 10 mm – Copper: up to 4 mm – Brass: up to 6 mm Additional functions: – IPG fiber laser resonator – Water cooling system for laser source and cutting head – Extraction and filtration system under and above the laser – Double table system – Pipe laser with 4-point chuck and can cut up to 6 m – CAD software – Nesting software – Pipe laser software – Very good condition, annual service performed 2024.12. If you have any more questions, we will be happy to answer.

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - Operating hours: 4428 - Control type: Siemens - Control: CNC - Travel X: 6500mm - Travel Y: 3300mm Lredpfxewnidhj Af Eeu - Resonator type: 7XSE-60 - Power: 37.0kW Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2014, Operating hours: 78,000 hours 5 kW resonator Lrsdpfxewd Ng Us Af Eju Annual maintenance by Trumpf

Condition: new, table length 3000 mm table width 1500 mm burner heads Precitec ProCutter laser capacity in Watt 6000 x-axis 3050 mm z-axis 150 mm y-axis 1550 mm total power requirement 21 kW dimensions 9190 x 3710 x 2200 mm weight of the machine ca. 11200 kg Furnishing: - Resonator Ytterbium YLS 4000 compact - Beckhoff controller - Precitec ProCutter Automatic cutting head - autom. Lubrication system - CAD / CAM software LANTEK EXPERT CUT - 17 "touchscreen, keyboard, control panel - Collective conveyor under the cutting table - additional loading unit Lredpfxsgvq D Ue Af Eeu Cutting capacities: - normal steel 25 mm - stainless steel 15 mm - aluminum 12 mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - s speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables - d 2,500 kg. assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system - Sick light barrier safety device - Spare part basic supply package Why Fibermak? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - axes equipped with linear motors / Servo motors reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology (Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting from reflective materials like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, equipped with world-famous, durable, high-quality components - ERMAK passes the price advantage on to its customers thanks to its fast and high quality production - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

Year of construction: 2007, condition: ready for operation (used), Additional Equipment Resonator: 6 kW Co2 Lodpfxewg Ig Ej Af Eoru Incl LiftMaster Additional Equipment Resonator: 6 kW Co2 Incl LiftMaster This 3-axis TRUMPF TruLaser 5030 classic 6,0kW + LiftMaster was manufactured in 2007. Ideal for precise CO2 laser cutting, this machine offers robust performance and reliability. Consider the opportunity to buy this TRUMPF TruLaser 5030 classic co2 laser cutting machine. Contact us for more information. Application Types Cutting

Condition: good (used), Brüel & Kjær Vibration Test System 4812 + 4801 Shaker Technical Specifications – Exciter Head 4812 • Max. dynamic force: 445 N (100 lbf) with Body 4801 • Current consumption: 23 A RMS with cooling / 11.5 A without • Resonance frequency: 7.2 kHz • Travel: 12.7 mm continuous / 14 mm maximum • Acceleration limit: 981 m/s² • Bolt torque limit: 3.4 Nm • Dimensions: Ø 235 mm × 178 mm • Weight: 8 kg • Material: hard-anodized aluminum Technical Specifications – Exciter Body 4801 • Power supply: 380 V ±10% or 440 V ±10%, 3-phase, 50 Hz • Cooling: Air-cooled (integrated fan) Lsdpfexlz Uwsx Af Ejru • Mounting height (without head): 370–405 mm • Additional height due to head: +50 to +130 mm • Weight: 75–80 kg Description & Use: Condition: Used (see pictures). Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: used, Year of construction: 2005, laser power: 4 W, Laser cutting machine FIN POWER L6-A. Very good condition, serviced every six months and major service every 4 years. Full history, service reports included. The machine is connected, can be tested, inspected. Specification: Model: Fin Power L6-A Year of manufacture: 2005 Power: 4 kW Working area (X x Y): 1500 x 3000 mm Working hours: 90,000 resonator worked Cutting: 20 mm black metal, up to 15 mm very clean. Stainless steel up to 12 mm. Aluminum up to 8 mm. Zinc up to 3 mm. Other: Interchangeable tables, two lenses Lrodpfx Afewdtrns Eju Location: Kaunas Can be tested: Yes If you have more questions, we will be happy to answer.

Condition: new, Year of construction: 2025, Y250 HC10 Laser Laser Welding System Compact, Flexible, Easy to Use Lredpfow N N Disx Af Eeu - Integrated Robot Controller (YRC1000) - Yaskawa HC10DTP Cobot - Inxpect Radar Sensors / Increased Safety - Easy Mobility with the Pallet Truck - Extremely Simple Programming - Easy to Teach with the Yaskawa Smartpendant - Industrial Mode for Increased Speed Scope of Delivery: 1x Yaskawa HC10DTP Cobot with Integrated Robot Controller (YRC1000), Profinet, and Smartpendant (tablet programming device). Delivered assembled and ready for use on the robot platform. 3x Inxpect Radar Sensors / mounted on the robot platform. 1x Raycus 2kW fiber laser with water cooling 1x Wire feeder for the following wire thicknesses: Ø0.8, 1.0, 1.2, and 1.6 mm. 1x Ospri LWD200 laser head, QBH connector, 75mm collimator, 200mm focal length, water-cooled, including CDD camera and screen. 1x starter set consisting of: 1x Univet laser safety goggles, 5x protective lenses, 5x spare nozzles. Solid robot platform The mobile robot platform consists of a sturdy welded steel construction (250 kg weight) with a powder coating. This allows the robot to run at 100% speed while remaining mobile! Easy to position with the pallet truck. Laser power, power with reserves! Laser power: 1.5 kW - 2.0 kW - 3.0 kW RAYCUS RESONATOR Example: With the 2.0 kW fiber laser source, it is possible to weld steel up to 6 mm, stainless steel up to 5 mm, and aluminum up to 4 mm. The laser is a pure industrial device with water cooling for 24/7 continuous operation. TECHNICAL DATA -Model: Y250 HC10 2KW LASER -Range: 1400mm -Laser Power: 1500-3000W -Total Weight: 350kg -Safety: Inxpect radar sensors -Cobot repeatability: 0.05mm -Wire feed: Ø0.8, 1.0, 1.2, 1.6mm -Mild steel up to 6mm -Stainless steel up to 5mm -Aluminum up to 4mm -Cobot power consumption: 1KVA -Base dimensions: L x W x H 950mm x 750mm x 880mm -Water cooling: Yes

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 26,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, cutting speed: 300,000 mm/min, workpiece weight (max.): 1,800 kg, TECHNICAL DETAILS Travel ranges X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm Maximum workpiece weight: 900 kg Laser: TruDisk 5001 Maximum power: 5,000 W Wavelength: 1.03 µm Maximum sheet thickness Mild steel: 25 mm Stainless steel: 20/25 mm Aluminum: 20/25 mm Copper: 10 mm Brass: 10 mm Speed Simultaneous: 265 m/min Lrsdpfx Ajxd Afhjf Eju Accuracy Positioning deviation Pa: 0.05 mm Maximum mean positioning deviation Ps: 0.03 mm MACHINE DETAILS Control unit: Siemens Sinumerik 840D SL Dimensions & Weight Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Weight: 12,000 kg Power consumption Total system: 7–39 kW Resonator: 5 kW fiber Beam on hours: 26,000 h Operating hours: 68,000 h

Condition: new, table length 3000 mm table width 1500 mm burner heads Precitec ProCutter laser capacity in Watt 4000 x-axis 3050 mm z-axis 150 mm y-axis 1550 mm total power requirement 22 kW dimensions 9190 x 3710 x 2200 mm weight of the machine ca. 11200 kg Furnishing: - MOMENTUM GEN - 2 fiber laser cutting machines 3,000 x 1,500 mm - Ytterbium YLS 4000 compact resonator (4 kW) - PRECITEC PROCUTTER laser cutting head - CAD / CAM software BECKHOFF - Controller CP 6242 - 17 "touchscreen, keyboard, control panel, alphanumeric keyboard - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel ... 20 mm - stainless steel ... 12 mm - aluminum ... 10 mm - brass ... 6.0 mm - Copper ... 5.0 mm Workspace: - max .: 3,000 x 1,500 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - s speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) Lodpfx Afegvq A Ej Eoru included : - Compatible suction system - Light barrier safety device - Spare part basic supply package Why Fibermak / Fiberlaser? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - Axis speed: reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology - Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical components - therefore, among other things, very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting reflective materials * like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

Year of construction: 2016, condition: ready for operation (used), Main Drive Number of axis 3 Additional Equipment Extraction Unit: Included Resonator: Included Pallet Changer: Included Scrap Conveyor: Included Autofocus: Included Auto Nozzle Changer: Included This 3-axis ERMAKSAN Fibermak Momentum Gen-3 4.0 kW was manufactured in 2016. It features a 4.0 kW IPG resonator, a maximum sheet size of 3000x1500mm, and includes an extraction unit, pallet changer, scrap conveyor, autofocus, and auto nozzle changer. If you are looking to get high-quality cutting capabilities, consider the ERMAKSAN Fibermak Momentum Gen-3 machine we have for sale. Contact us for more information about this machine. Application Types Lrodpfjw Huvtjx Af Eju Cutting

Condition: good (used), Tira Type: TIRAvib S595/RIT-340 TIRA TIRAvib S595/RIT-340 – Electrodynamic Vibration System (Shaker) with RIT-340 Isolation Frame For sale is a professional electrodynamic shaker from TIRA GmbH. The TIRAvib S595/RIT-340 model is designed for highly demanding vibration and shock tests and is operated in conjunction with the TIRAvib A 54336 power amplifier. The device complies with ISO 5344 and is ideally suited for research institutions, universities, and industry applications (automotive, aerospace, electronics testing). Technical data: Lredpfxexbqr Rj Af Eeu Performance: Rated force (SINE): 20,000 N Rated force (NOISE): 20,000 N Rated force (SHOCK): 40,000 N Frequency range: DC – 3 kHz Resonance frequency of moving system: > 2.4 kHz Dynamics: Maximum acceleration: SINE: 82 g RANDOM: 82 g SHOCK: 163 g Displacement (peak-to-peak): 50.8 mm Vibration velocity: SINE: 1.8 m/s RANDOM: 1.8 m/s SHOCK: 2.5 m/s Mechanics Vibration system mass: 23.9 kg Load: 410 kg Spring stiffness: 150 N/mm Mounting table diameter: 340 mm (24x M10 threaded inserts, bolt circles 100/200/300 mm) Guidance: 8 spring arms, linear guide (ball bearing) Stiffness: Axial: 15 kN/m Radial: 2,000 kN/m Torsion: 25 kNm/rad Max. specimen weight (vertical): 410 kg Electrical: Rated current (coil): 200 A D.C. resistance: 0.084 Ohm Field coil: Rated current: 85 A Rated voltage: 70 V Resistance at 20°C: 0.75 Ohm Magnetic stray field (150 mm above table): without demagnetization coil: < 10 mT with demagnetization coil: < 1 mT Demagnetization coil (optional): 36 V / 4 A Utilities Cooling performance: 3,300 m³/h air Compressed air: 600 kPa, oil-free and dry Power supply: 3P/N/PE – 400 V – 50 Hz Power consumption: 25 kW Rated current: 37 A Dimensions & Weight Width: 947 mm Length: 850 mm Height (vertical): 1077 mm Total weight (complete frame): 1610 kg Shaker weight: approx. 900 kg Condition: used Scope of delivery: (see picture) TIRAvib S595/RIT-340 shaker RIT-340 rotation isolation frame (Specifications and technical data are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: like new (used), Year of construction: 2023, BODOR m3 – fiber laser metal tube cutting machine Function&parameter list Tube size range-Square tube 25 - 356mm, I-beam 10#-22# Option the special jaws, I-beam 100-320mm; Hea profiles 100-320mm Basic parameter (Metal Plate Cutting) Cutting Capacity (MaximumThickness): Carbon Steel 18 mm Basic parameter (Metal Plate Cutting) Cutting Capacity (MaximumThickness): Stainless Steel 18 mm Operation parameter Shortest remaining material - no waste of materials Max. length of machinable tubes 12000mm Maximum tube weight: 800kg Overall sizes: 27430mm×2710mm×3160mm Machine weight: 16000kg Positioning accuracy: 0.06mm/m Repeated positioning accuracy: 0.04mm Max. speed of chuck with no-load 75r/min Max. speed of chuck feed axis 80m/min Max. speed of laser head moving axis 60m/min Max. acceleration of chuck feeding axis 1G Maximum acceleration of laser head moving axis 0.6G Max. speed of Z-axis 60m/min Total power capacity/current with 12KW source Total power capacity/current with 6KW source 123KVA/156A Total power capacity/current with 3KW source 108KVA/137A Total power capacity/current with 1.5KW source Bodor's laser has a conversion rate of up to 35%, which is significantly higher than its domestic general counterparts' 25% and far higher than CO2 lasers' 5 10% electro-optical conversion rate. As a result, power consumption and operating costs can be significantly reduced, and the productivity will be improved. Unlike CO2 laser, fiber laser does not consume laser-generating CO2 gas and other auxiliary gases (such as helium, nitrogen, etc.) Adopting semiconductor modular and redundant design, fiber laser has compact structure with no optical lens in the resonant cavity. Simpler repair and maintenance, lower failure rate and lower operating cost The central wavelength of an optical fiber laser is 1080 nm, or one-tenth the wavelength of a CO2 laser. The processing costs are lowered to a minimum since the output beam has superior quality, a larger power density, and is easier to absorb by metal materials. Optical fibre laser transmitted through the whole machine with simple optical path, stable structure. External optical path is maintenance-free. Nesting software compatible with Tekla Bodor Nest supports direct NC1 files import. Lodpfx Afowzxbco Eeru Bodor Nest Tube supports Tekla online import. Compatibility: compatible with various versions of Tekla software. Auxiliary loading device Integrated material table, material selection and loading function. After placing the raw materials at according workstation, it can complete the cyclic loading of round , square, rectangular pipe, channel steel and I-beam, which can significantly improve the processing efficiency and reduce labour cost. Fume filter for Laser Cutting Machine Video: Price: 209.700 Euro + VAT, negotiable, ExWorks Arad /Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, controller model: Siemens Sinumerik 840D, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 4,800 kg, Trumpf TruLaser with LoadMaster! TECHNICAL DETAILS X-axis: 6,000 mm Y-axis: 2,000 mm Z-axis: 115 mm Workpiece Max. weight: 4,800 kg Maximum Speed Simultaneous: 300 m/min Accuracy Position deviation Pa: 0.05 mm Mean position deviation Ps: 0.03 mm MACHINE DETAILS Control: Siemens Sinumerik 840D Lodsxc U Uljpfx Af Eoru Dimensions and Weight Dimensions (L x W x H): 16,950 x 5,550 x 2,550 mm Weight: 16,000 kg Resonator: 6 kW CO2 Beam operating hours: 25,000 h EQUIPMENT LoadMaster

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30,843 h, Main Drive Number of axis 3 Additional Equipment Lodpfx Afexgwcts Eeru Resonator: 4kW Co2 This 3-axis TRUMPF TruLaser 3030 was manufactured in 2014. It features a 4.0 kW CO2 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high quality cutting capabilities consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Condition: excellent (used), Year of construction: 2015, operating hours: 27,500 h, Operating hours: 27,500 h Laser on: 17,000 h Resonator: 5KW Lrsdoxbfvwspfx Af Eju Price on request

Condition: ready for operation (used), Year of construction: 2014, Main Drive Number of axis 3 Ljdpfx Afexgwcgs Eeru This 3-axis TRUMPF TruLaser 3030 Fiber was manufactured in 2014. It features a 3.0 kW fiber resonator and handles a maximum sheet size of 3000x1500. Ideal for precise fiber laser cutting, consider the opportunity to buy this TRUMPF TruLaser 3030 Fiber laser cutting machine. Contact us for more information. Application Types Cutting

Year of construction: 2011, condition: ready for operation (used), Max Material Thickness Steel Up to 25 mm Lsdoxcqmwopfx Af Eeru Stainless steel Up to 12 mm Aluminium Up to 8 mm Additional Equipment Fully automatic sheet handling system Included with the machine: Automatic loading and unloading unit, tools, and user manual This Finn-Power L6 laser + LU3000 was manufactured in 2011. It features a CO₂ resonator laser with a 4 KW power and a fully automatic sheet handling system. The working area accommodates 3000 × 1500 mm. It can handle mild steel up to 25 mm, stainless steel up to 12 mm, and aluminum up to 8 mm. For more information about this machine, please reach out to us. Application Types Cutting