Reiden r200 for sale

Your location was not identified (Edit)
Enter your address
or
Move
11

Center lathe REIDEN R200-2

Beringen, SwitzerlandSwitzerland
18093 km
excellent (used)
Center height 200mm Nmqih Distance between centers 1000mm Spindle speeds 36-1780 rpm Digital read-out HEIDENHAIN Misc.accessories MARCELS MASCHINEN CH more
6

Universal Lathe Reiden R200

Reiden, SwitzerlandSwitzerland dealership location
18150 km
used
Description -7 steel holder -Live Oykjzi22 -Chuck Technical data: Tip height 200 mm Top width 800 mm Rotation Ø over slide 235 mm over bed mm offset 425 470 mm Recording camlock speed infinitely variable 36-1780 RPM Spindle bore 45 mm diameter of tailstock Quill 55 mm Morse taper of spindle and tailstock MK 4 more
2
Make HTT, Type WTE 05-2-18-1-2-Ex, Extra Specifications 19 kW HTT process heater type WTE 05-2-18-1-2-Ex, Serial number 8.2.3617, electrical power, 18 kW, max. Temperature 175°C, min flow rate 4,2 m³/h, with Speck circulation pump TOE-CY-6091.0284, flow rate 7,2 m³/h AT 25 m, heating fluid Marlotherm SH, built[[ What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are we... more
4
Mechanicaly very good preserved, regularly mantained. The weight of clamping,tooling and weight of the piece during the whole period of working was only about 40kg. It was working with only about 40-50% load. We are selling the robot becouse of replacing it with new technology from other supplier for the whole new robot cell. 0lr28mwq more
5
Commission 20180405 Capacity 550 kg Drive type mast lifting height 0 mm Height 0 mm Free hub 0 mm Bdzvbumhoc Forks 0 mm technically good visually well Bereifung_vorne rear tyres optional more
1
Can be used to heat up oil which can then be sent to the tables of heated presses. powered by natural gaz 300 mb volume cap: 450 liter Weishaupt burner 2rc3ea Poser: 200 kW max temp: 250° output: 12m3/hour more
5

Machining Center - Universal REIDEN BFR-1 / 5-Achs

St. Ingbert, GermanyGermany dealership location
18132 km
2000
used
x-travel:1200 mm y-travel:600 mm Bemawj2tj3 z-travel:700 mm Feeding x,y,z:0-20000 mm/min. tool taper:SK 40 operating hours:11.840 h spindle speed::20 - 6300 U/min dimensions of machine:7500 x 2400 x 2.900 mm table load:800 kg rotary table dia.:800 mm internal coolant system feed:30 Bar B-axis (table):+ / - 90 Grad ° Tool changer:72 Plätze weight of the machine ca.:8,5 t Equipment of the machine:5 achs - Chip conveyors - Separate cooling and lubricant treatment with cooling unit - Work platfo... more
5

Robot Fanuc R2000iB 210F R30iA

Bilbao, SpainSpain dealership location
19094 km
ready for operation (used)
Technical DataPayload: 0/210 KgArm reach: 2.66 mmNumber of Axis: 6Repeatability: 0.30 mmRobot weight: 1240 KgMounting: FloorTechnical Data: • Payload: 210 Kg. • Arm Reach: 2655 mm. • Repeatability: 0,3 mm. • Controller: R3OiA. Axis motion speed: • Axis 1: 95º/s • Axis 2: 90º/s • Axis 3: 95º/s • Axis 4: 120º/s • Axis 5: 120º/s • Axis 6: 190º/s Applications Stud Welding ... more
2
Make Draiswerke GmbH Spezialmaschinenfabrik Mannheim (DE), Type Superflow VCR 200, No 56153, New 2000, Vertical sandmill , Capacity 15 Ltr, Inlet DN 25, Outlet DN 25, With sieve (0,7 - 0,9 mm), With mechanical seal , Working pressure 3 bar, With jacket (14 ltr), Working pressure 3 bar, Max. temperature 98 [...] Motor 45 KW, 380 Volt (EEx de II CT4), With variable speed drive , Rotor speed 460 - 780 rpm, Without balls , With pump , Motor 2.2 KW, With variable speed drive , With switch , With swit... more
4

Automations Mahros *Lifter 200 4/B

Terre Roveresche, ItalyItaly dealership location
17822 km
2003
ready for operation (used)
4/200 B Mahros loader Lifter with the following characteristics: -Manual -suction cups -pneumatic -EC regulations. Be9wx3eoh9 more


reiden r200
daily

New machines via email!

Stay updated!
10
NEW VALUE*** Tig-Master 200 G Welding Machine from January 2018 only a few operating hours - hardly used ! New price demonstrably 3500,- Euro ! Mains connection: 230V 50/60 Hz Power consumption: 4.7 KVA max. Program memory: 9 Welding current: TIG 5 - 190 Amp. Welding current: Electrode 10 - 140 Amp. Switch-on time: 200 A 40% 160 A 60% 140 A 100% Output: DC and pulse effect Type of protection: IP 23 S Dimensions L x W x H: 450 x 176 x 402 Weight basic unit: 12.9 kg Enclosed access... more
11

CORRECTORS Réctifieuse inter TRIPET MAR 200 MAR 200

ST GERMAIN DE PASQUIER, FranceFrance dealership location
18526 km
ready for operation (used)
Serial number 5868.9.272 Tihea0tw Inter (mm) 1-80 Rectification depth (mm) 3-200 S/ bench (mm) 264 Rotational speeds of the room-carrier doll (Tpm) 150-1500 Rectification Advance Speeds (m/mn) 0-10 Main Engine Power (CV) 3 Dimensions LxPxH (mm) 1900x1000x1500 Machine Weight (T) 1.3 more
2

Ultrasonic Cleaner BRANSON Ultrasonic Cleaner 200

W1D 5EU Brebners, United KingdomUnited Kingdom dealership location
18409 km
ready for operation (used)
Condition Used Listing name BRANSON Ultrasonic Cleaner 200 Ultrasonic Cleaner Ju8mda This listing is for a compact, tabletop BRANSON 200 ultrasonic cleaner. ————— ITEM LOCATION: Germany SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFTF011 more
9

milling machining centers - universal REIDEN BFR 1

Mülheim an der Ruhr, GermanyGermany dealership location
18038 km
2000
used
capacity X-axis 1.200 mm capacity Y-axis 600 mm capacity Z-axis 700 mm Control Heidenhain - TNC 430 b-axis + / - 90 ° Qlrznqey tool taper SK 40 turning speed range 20 - 6.300 U/min Torque max. 240 Nm Automatic tool changer 72 Stk. tool length - max. 300 mm rotary table dia. 800 x 630 mm internal coolant system feed 30 Bar length x width x height 7.500 x 2.400 x 2.900 mm weight 8.500 kg 5-axis simultaneous machining center - Handwheel HR-410 - 3D probe TS-632 - Tool laser measuring system... more
7
Item number: 1971 Mhxeacs Model number: 200 0108089 Manufacturer: Boyens Backservice GmbH Built: 2003 -electrically heated hoses and pistol -maintenance-free technology -no temperature fluctuations -Spray gun included -easiest operation and digital temperature display -Spray pressure can be digitally adjusted -230 V/50 Hz, 16 Width: 55 cm depth: 45 cm height: 93 cm -completely cleaned, technically tested and tested, immediately usable; -very good overall condition more
5
Four-jaw Chuck, 4 - jaw Chuck Chuck size ø 250 mm 3fk3qeq -a set of hard JAWS Short taper Mount for bayonet wheel mounting Cone size 6 Cone diameter 106,375 mm Bolt circle diameter 133.4 mm Includes 55mm Weight 15 kg more
3
Operating duration 10000 h, Red line 200mW, Bdukv3xdon Size 16x70mm, Adjustable focuss, Italian technology, Warranty 1 year. Technical data Description UNI16-LR200 Light wavelength, nm: 650(red) Power, mW: 200 Laser dot type: line Line angle,°: 90 Optical system: lens Modul material,: aviation aluminium Focus: adjustable Dot size, mm: 1-3 Deflection, Mrad: 0.1-2 Operating voltage, V: dc=3, 5 Operating amperage, mA: ᐸ40- ᐸ300 Operating Temperature, C°: -10~ 6... more
4
Here we offer you a laminating system. pneumatic laminating system with heating field and temperature device Built in 2010 Total height: 3340 mm Total length: 2350 mm Total width: 2700 mm Technical data Pneumatic connection: Max. Air demand: 320 litres / min Operating pressure: min. 6 bar Electrical connector: Control / control cabinet Electrical power consumption: 42 kVA Connection: 400V 50Hz Current: 63 A max. pre-fuse: 63 A The installation must be carried out on a solid and f... more
6

Precision /portal/flat grinding machine LGB MACHINES R200120SM

Düsseldorf, GermanyGermany dealership location
18064 km
2000
used
30.000 €
Offernot incl. VAT
Another 2 days
max. grinding length: approx. 2000 mm, max. grinding width: approx. 1000 mm, max. working height: approx. 600 mm, max. table load: approx. 4000 kg, max. grinding wheel diameter: approx. 450 mm, max. approx. 1200 rpm,magnetic plate size: approx. 2000x1000 mm, m. refrigerant device, control, control. LGB, type: SM, m. digital displays, 1 nonwoven filter system, Fabr. Filtres Monnet Bacqnc8e more
7

CNC bed type milling machine REIDEN BF 1

Brügg, SwitzerlandSwitzerland dealership location
18205 km
ready for operation (used)
Technical data Table length 1000 mm Table width 560 mm Max workpiece weight on the table 1000 kg Longitudinal path (X-axis) 1000 mm Transverse movement (Y-axis) 500 mm Vertical path (Z-axis) 550 mm Distance between spindle Nnw0t and table 100 - 650 mm Spindle holder 40 ISO Spindle speeds: continuously variable of 20 rpm up to 3100 rpm Feeds: Longitudinal of 2 mm/min up to 2000 mm/min Cross of 2 mm/min up to 2000 mm/min Vertical of 2 mm/mi... more
6
Gallus R200B - rotary leterpres machine - unvinder max 600m paper core 76mm - 6 uv leterpress units (5 + 1) varnish - flet bed die cuttind unit - slitting unit - label counter Vf8xdjg2 rewinder more
5
Three-jaw chuck, three-jaw chuck, 3 jaw chucks -Chuck size O 200 mm -Hole circle O 133 mm Bff3mhmlde -Passage O 20 mm -Weight 22.1 kg more
3
Operating duration 10000 h, Red line 200mW, Size 22x110mm, Adjustable focuss, Italian technology, Warranty 1 year. Technical data Description BIG22-LR200 Light wavelength, nm: 650(red) Power, mW: 200 Laser point type: line Line angle,°: 90 Bqwhhgt Optical system: lens Modul material,: aviation aluminium Focus: adjustable Point size, mm: 1-3 Deflection, Mrad: 0.1-2 Operating voltage, V: dc=3, 5 Operating amperage, mA: ᐸ40- ᐸ300 Operating Temperature, C°: -10~... more
6

Universal lathe Reiden R 200

Reiden, SwitzerlandSwitzerland
18150 km
excellent (used)
-Digital display HEIDENHAIN -Three jaw Chuck - tool holder Multifix ʺBʺ -Live Bejqqubbi2 -Chuck -Revolving bezel -Fixed bezel Tip height 200 mm Top width 800 mm Rotation Ø over slide 235 mm over bed 425 mm Speed 45-2240 Rev/min Recording 6 camlock spindle bore 45 mm face and longitudinal feed 0.05 2.8 mm / Rev Ø of the tailstock Quill 55 mm Morse taper of spindle and tailstock MK 4 Spindle motor 8 HP more
6
Vehicle - Make: -Other - Type: Non-chalking tires, Non-marking tyres, non-colouring tyre profile Bfb9ymgz39 - Drive type: - Load capacity: 0kg - Load centre: - Lifting height: 0 mm - Reach: 0 mm - Year built: 0 - Operating hours: 0 - Internal No.: 88888X _____ Mast data - Mast type: - Lifting height: 0 mm - Height: 0 mm - Free stroke: 0 mm - Fork carrier: 0 mm - Forks: 0 x 0 x 0 mm _____... more
1
Super Quadrex 200Mnbsp; C-axis Double turret: 1 - upper turret:nbsp; gt; X-travel: 190 mm gt; Z-travel: 645 mm gt; 12 tools (driven tools) 2 - lower turret: gt; X-travel: 140 mm gt; Z-travel: 630 mm gt; 8 tools Chipconveyor Airfilter on top of machine Optional: tools and accessories ----- 2 револьвера Ось-С Bdmdqlnatl Стружковыводитель Воздушный фильтр установлен на верх... more
7
Train & Leitspindel lathe of brand Reiden Type: S 250 Technical data: 400V Centre distance: 1500 mm Cheek tips above: 280 mm Tip height in the bend: 310 mm Spindeldorchlass: 53 mm J7g30qy Speeds: from 16 1120 K rpm Tailstock: MK 5 Plan and longitudinal feed original owner's manual available with many accessories, including: 3 different-sized 3Backenfutter with JAWS, Baddam quick change steel holder with 3 holders, revolving bezel, fixed bezel, revolving ce... more
5
Lathe, Lathe, Lathe, Power Clamp Zxoesuta -Foot size O 200 mm -Short cone 6 -Weight 25 kg more
1
Compressor with specially high efficiency rate for long-term use. Great for srevice stations, factories where high quality, efficiency and pressure resistance is important, can be used for painting jobs. Bdt8bplraa Technical data: Descriptions Air200W 7.5kW Power supply , V: 3Ph 380 50Hz Motor power, kW: 7.5 Motor power, HP: 10.0 Air delivery, L/min: 900 Maximum pressure, Bar: 8 Maximum pressure, Psi: 116 Air tank capacity, L: 200 Dimensions, (length x width x heigh... more
1

cnc universal bed type milling machine Reiden BFR 1

Kirchheim b. München, GermanyGermany dealership location
17849 km
1999
good (used)
Steuerung Heidenhain TNC 426 E72xu0nu0 Tischabmasse X1200mm Y 630mm Verfahrwege X 1200 Y 600 Z 700 mm Kopf automatisch schwenkbar (2,5 °) WKZ – Aufnahme SK 40 WKZ – Wechsel manuell (kein Magazin) Spindeldrehzahl 3500 U/min more
13

lathe REIDEN T200

Oetwil am See, SwitzerlandSwitzerland
18095 km
excellent (used)
Centre height/Centre width 200/1000 mm Digital unit 3-axis BICK D60-3V Spindle bore 51 mm Speed (18 steps) 45-2240 RPM Spindle nose ASA Camlock D6" Turning diameter over cross slide 240 mm P9ua2jix Turning diameter over bed 425 mm Turning diameter in the crank 470 mm Tailstock quill diameter 70 mm Tailstock quill cone Morse 4 Feed (stepless) 0,04-0,9 mm/U Rapid feed 2800 mm/min Main drive 380V / 50Hz / 10 HP Rapid feed drive 0,75 HP Dimension (WxDxH) 245x130x165 cm Weight 2050 kg... more
3

Reiden lathe Reiden R 200 - 2

Herning, DenmarkDenmark
17637 km
1984
excellent (used)
Reiden lathe Model R 200 /2 - Year 1984 Turning lenght : 1500 mm. Sving over bed : 400 mm. Spindle borer : 45 mm. Be77xmgeav RPM. : 45 - 2240 3 jaw chuck 200 mm. - 3 jaw chuck 250 mm. - Steady rest - Following rest - Quick change tool post with 10 sideholders + other equipment more
1

Industrial robots robot Kuka KUKA KR200-3

Nürtingen, GermanyGermany dealership location
18010 km
2004
good (used)
Kuka robot KR200-3 Built in 2004 Range 2400 mm Weight 1125 kg Carload 200 kg ..... 8aekw2avy more
5
Three-jaw chuck, three-jaw chuck, 3 jaw chucks Gvwulg -Chuck size O 200 mm -Hole circle O 134 mm -Weight 20.7 kg more
12
The following items are for sale: - Our offer number: 83/76 - Barrel lifter, barrel lifter, barrel gripper, barrel lifter, barrel lift, drum gripper, drum lift - Type/Model: Faßboy - Factory number: 730071 - Load capacity 350 kg - built in 1990 - for steel and plastic drums - Maximum lifting height 1.70 m - Weight 135 kg - hydraulic foot pump - for 200 l barrels - 3 wheels, 1 steering wheel with foot brake - Barrel diameter 58-59 cm - Full rubber (light jerking when rolling the b... more
3
2 automatic folding plates With Preselect unit & Programmable memory Paper size minimum 90 x120 mm Paper size maximum 350 x 650 mm Jib2jsr Paper stocks 40 - 240 g/m2, depending on paper quality Folding performance up to 30’000 sheets A4/h stream delivery Perforation shafts more
2
Intel R2308GL4GS Nm7fb Intel® Xeon® E5-2640 (2.00 GHz, 20 MB Cache) V2 GoodRAM 16GB 1333MHz DDR3 ECC Reg w/Parity CL9 DIMM DR/x4 1, 35V RMS25CB080 RAID Module more
2

4 SIDE PLANER STETON R200

Mariano Comense, ItalyItaly
18097 km
good (used)
PLANER 4 SHAFTS type STETON R 200 second hand machine machine composed of 4 shafts indipendent motors 1st: surface planer 2nd : moulders rigth 3th: moulder left 4th: thickness planer max. useful width mm. 200 max. useful height mm.120 2q8ely entry plane length mm.2000 volt. 380/50 more
1
Robot industrial robots Kuka KUKA KR200L140-2 Comp KRC2ed05 Built in 2007 Range 2800 mm Weight 1267 kg Carload 200kg, 140kg Control KRC2ed05 Weight 185 kg Processor 2GHz WinXP Language Software status V5.6.6 H2hjgn99 Teachpendant Kuka KCP2ed05 Interconnectors 7m/15m (Several in stock, Orange) .... more
5
Lathe feeder, Lathe lathe, 3 Lathe feeder -DH200x3 III -TGL30-2332 -Futter size Ø 200 mm Bff3l72fpd -Weight 16.7 kg more
4
Premier Pallet Inverter with infra red safety curtain Maximum pallet height 2.000 mm Capacity 2.000 kg Cginbtvy Loading possible with pallet truck more
10
Technical Specifications: Travels X, Y, Z: 1000, 500, 550 mm feeds: Manual mode: 2-10000 mm / min. Program mode: 2-10000 mm / min. Rapid: 10000 mm / min. Worktable: Clamping surface: 1000x560 mm On T-flutes: Number 8 pcs. width 14 Distance 63 mm Zul. Table load: 1000 Kg milling head: Spindle automatic. swiveling: horizontal / vertical Milling head front retractable system: +/- 90 ° (Division every 2.5 ° Hirth coupling) Uwi9fdmp0 Receiving cone: ISO 40 Infinitely variabl... more
9
maximum working length 2140 mm sheet gauge up to 0,8 mm approx. weight of hand machine 200 kg shear cutting on the whole working length upper bar lifting in three positions maximum clearance between bars 100 mm M8ibzbcx8 more
1
Compressor with specially high efficiency rate for long-term use. Great for srevice stations, factories where high quality, efficiency H8k3myqls and pressure resistance is important, can be used for painting jobs. Technical data: Descriptions Air200W 5.5kW Power supply , V: 3Ph 380 50Hz Motor power, kW: 5.5 Motor power, HP: 7.5 Air delivery, L/min: 670 Maximum pressure, Bar: 8 Maximum pressure, Psi: 116 Air tank capacity, L: 200 Dimensions, (length x width x height), mm... more
2

Robot Kuka KUKA KR200 - 1A KR 200

Nürtingen, GermanyGermany dealership location
18010 km
1996
good (used)
Robot Kuka KR200-1A Built in 1996 Range 2400 mm Weight 1125 KG Carload 200 kg Hose package Control VKRC1 Weight 136 kg Software Version V4.1.7 (Standard Kuka) Teachpendant Kuka KCP1 Cable set 7m/15m ..... Yq3b2g more
5
Two-jaw chuck, 2 jaw chucks, vise, face plate -Chuck size Ø 200 mm -Hole circle 175 mm Zxn2bo89 -Weight 21 kg more
8
-Digital display Fagor. -Accessories available. Tip height 200 mm Top width 800 mm Turning diameter over slide/bed 240/425 mm Length of the bend of the Planscheibem with 4 JAWS 180 mm Spindle bore 51 mm Inner cone 60 metric Recording camlock D6 " Speed 45-2240 Rev/min The lead screw pitch 6 mm Tailstock spindle mount MT 4 Diameter of tailstock Quill 70 mm Nlrot Quill: 200 mm stroke Feeds: Along 0.05 2.8 mm / Rev Plan 0.05 2.8 mm / Rev Rapid traverse: LW Thread pitches: Metri... more
13
HAKO City Master 2000 Euro-5 Bes8n8gqf7 Street suction Sweeper This HAKO City Master 2000 E5 is built in 2011, has 5.368 total operating hours, of 3,290 sweeping hours and 52.160 km according to the counter and is €140.000,-in well-maintained condition, fresh from the service, ready to use, EIA! -Inspection / test drive like possible! -Shipping can be arranged nationwide, the costs depend on the distance! -Like, let's create an attractive leasing / financing offer through our lea... more
4
Bergrzxukn 3 clamps milling cutter hot-melt gluing size max. 350x420 mm cover size max. 420 x 620 mm book thickness 3-45 mm more


reiden r200
daily

New machines via email!

Stay updated!

to

to

Edit search
REIDEN R200
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.