Universal machining center

Reiden RX 14

Condition: ready for operation (used), Year of construction: 2008, Walter MINI POWER Loader Psdpfx Aexnkzfoh Hegg Fanuc

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Pgjdpoxgnz Tefx Ah Hog Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: GS1000/5-T, rotational speed (max.): 30,000 rpm, overall weight: 15,500 kg, Year of manufacture: 2014 Podpfx Ahjw Awmtj Hogg Condition: very good Magazine: 66 x HSK63 Control: Heidenhain 530 Spindle: n=30,000 Erowa zero-point clamping system integrated into the table Erowa Robot Easy 250 automation with 6 pallets 3D probing system Oil-air lubrication of high-frequency spindle Laser measurement Spindle hours:

Condition: used, Technical details: balancing body max.: 800 kg balancing body diameter: 1250 mm Balancing revolution per minute: 190 - 3600 U/min bed length: 2600 mm voltage: 380 V/Hz drive power: 7,5 kw Weight approx.: 1,5 t dimension machine xH: 3,5 x 1,7 x 2,0 m dimensions electric cabinet: B:650 x T:250xH:800 mm Horizontal balancing machine The balancing machine is used to measure and balance the static or dynamic unbalance of rotors. Balancing body weight max. 800 kg with equal load distribution, i.e. 400 kg per bearing pedestal Power transmission by means of cardan shaft Bearing journal Ø min./max.: 16-95 / 95-180 mm Bearing distance center distance min. 125 mm and shaft end bearing center max. 2070 mm Measured speed: Pgodpfx Aeu Upp Tjh Hjg 1st gear = 190 - 650 rpm. 2nd gear = 400 - 1250 rpm 3rd gear = 700 - 2100 rpm. 4th gear = 1200 - 3600 rpm. 2 pick-up blocks whose displacement is manual over the entire bed Schenk measuring device with digital display and some accessories, e.g. many rotor shafts with different Ø and different rotor mounts, please ask! *

Condition: ready for operation (used), technical Details: Speed - 130m/min. , Year - 2006, run out table - 6 m Wire diameter range 4-12 mm Pgsdpfx Astndgpjh Heg

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Pgedjtiy Ntopfx Ah Hjg Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: good (used), Year of construction: 1982, functionality: fully functional, type of input current: three-phase, MCS Jigger High Temperature 144ºC. Podpfx Asfqmx Tjh Hjgg Type COMBY-JIGGER JP70. Year 1982. It underwent a complete renovation in 2002 Pressure: 3kg/cm2 Capacity: 9170 l Roller width 2,000 mm. Diameter of fabric 1100 mm. Diameter of rollers 324 mm. Additives tank.

Condition: used, different types available Pjdjdc A Sbjpfx Ah Hsgg

Condition: good (used), grinding diameter: 1,600 mm, grinding length: 6,000 mm, Manufacturer: CINCINNATI Type: 60 x 216 Year of manufacture: 1970 Covex and Concave grinding 6 steady rest included 2 steady rest hydrostatic Coolant system with magnetic filter Measuring system with 5 arms caliber: Arm 1: Working area 1300 to 1600 mm Arm 2: Working area 1000 to 1300 mm Arm 3: Working area 700 to 1000 mm Arm 4: Working area 400 to 700 mm Psdovvvw Eepfx Ah Hjgg Specifications Metric US Standard Center height 787 mm Grinding diameter Ø 1574 mm Grinding length 5800 mm Grinding stone dimensions 914 x 101.6 x 304.50 mm Grinding stone speed 1800 rpm Dimensions (estimate) Length 15100 mm Width 5500 mm Height 3550 mm Weight 120000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: C4652, grinding length: 5,100 mm, grinding width: 250 mm, overall weight: 9,100 kg, space requirement height: 2,300 mm, space requirement length: 9,000 mm, space requirement width: 4,000 mm, Reform AR 51 Type 7 Pgedpfx Ahstqtk As Heg Surface grinding machine Year of manufacture: 1990 Grinding length: 5100mm Grinding width: 250mm Workpiece height: 220mm Total power requirement: 36kW Used water system Lifting station, magnetic roller, pump