Used Reflective Densitometer for sale (433)

Condition: used, Year of construction: 1996, Reflective light barrier, light barrier -24 V -Permissible ambient temperature: -20 - 50°C Cgsdpfx Aob A Rl Noa Esp Price: per piece Quantity: 2 available -Weight: 1kg

Condition: good (used), Reflective light barrier, sensors, optically reflective logistics output -Power supply: 35 mA -Voltage: 10 V to 30 V -Sampling distance: 700 mm Price: per piece -Quantity: 7x Available -Weight: 0.2 kg Cjdpfeb A R U Rjx Aa Eogp

Condition: good (used), Year of construction: 1996, Reflective light barrier -Connection: 24 V -Permissible ambient temperature: -20 - 50 °C -Price: per piece -Quantity: 2 available Cgsdpjb A Nbaefx Aa Esp -Weight: 0.4 kg

Condition: good (used), Reflective photoelectric sensor, optical sensor -Type: OHG580/OHG-FPKG/US/CUBE -Sensing range: adjustable from 15-200 mm -Electrical design: DC PNP -Operating voltage: 10-30 VDC -Light type: Red light 624 nm -Reverse polarity protection: yes -Quantity: 2 available -Price: per package Codsb A Sbyepfx Aa Ejgp -Weight: 0.1 kg

Condition: good (used), Reflective light barrier, light barrier -Type: RK 08/1 -5.5 V AC -24 V DC Cgodob A Si Njpfx Aa Ejp -Weight: 0.2 kg

Condition: good (used), Reflective light barrier, light barrier -Type: RK 90/4-100 Cgedpfxob A Si Io Aa Eep -12-30 V DC -Weight: 0.2 kg

Condition: good (used), Reflective light barrier, light barrier -Type: WL 25-322 -24 V AC 48-62 Hz 6 VA -Weight: 2 kg Cedpfsb A Hzaox Aa Eogp

Condition: good (used), Reflective light barrier, light barrier Codpfx Ajb A Hclea Ejgp -Type: WT36-P710E02 -10-30 V DC -Weight: 0.2 kg

Condition: good (used), Reflective light barrier, light barrier -Type: WL24-X2301 Cgjdeb A Skaspfx Aa Ejp -Ui 15.5V Ii 53mA Pi 100mW Li 80uH Ci 80nF -Weight: 0.5 kg

Condition: good (used), Reflective light barrier -Type: WLL260-F240 -10-30 V DC -Weight: 1kg Cgedpeb A Si Sefx Aa Ejp

Condition: good (used), Reflective light barrier, light barrier -Type: RK 85/7-300 -240 V AC Codpjb A Si Rjfx Aa Esgp Price: per piece Quantity: 3 available -Weight: 0.5 kg

Condition: good (used), Reflective photoelectric sensor, optical sensor Cedpfob A Skisx Aa Eegp -Type: BES M08MD-GNX10B-EV02-EEX Quantity: 15 available Price: per package -Weight: 0.2 kg

Condition: used, This listing is for 1 of 2 Biorad Gs-900 Calibrated Densitometer The unit is in full working condition and is ready for immediate release Codpsxv D Dcjfx Aa Eegp The GS-900 Calibrated Densitometer is a self-calibrating 21 CFR Part 11 gel imaging system designed for acquiring gel, blot, and film images. It is capable of reproducibly imaging gels, blots, and film and quantitating proteins across a wide dynamic range. The system uses transmissive and reflective imaging to scan chromogenic samples at the optimal detection wavelength, and its three-color red, green, and blue CCD imaging technology enables accurate, reproducible quantitation with a wide variety of common stains. Key Features: Imaging Capabilities: Transmissive and reflective imaging for gels, blots, and film. Dynamic Range: Wide dynamic range for accurate quantitation. Imaging Technology: Three-color red, green, and blue CCD imaging. Calibration: Self-calibrating for consistent performance. Compliance: 21 CFR Part 11 compliance for regulatory environments. Included Components Scanner and Cables: Comes with the necessary scanner and cables for operation. Optional Software: Image Lab™ Software: PC-compatible software for image analysis. 21 CFR Part 11 Module: Security edition software for compliance with 21 CFR Part 11. Installation and Operations Qualification (IQ/OQ) Kit: Optional kit to meet cGMP environment needs. Specifications: Scan Area: 29 x 33 cm (transmissive and reflective) Wavelength: 400 – 750 nm Bit Depth: 16-bit grayscale

Condition: used, This listing is for a Grant Bio McFarland DEN-1 Densitometer The unit is in full working condition and is ready for immediate release. The DEN-1 is a compact benchtop turbidity/densitometer instrument manufactured by Grant Bio (part of Grant Instruments). It is designed primarily for life-science and microbiology applications — for example, measuring the turbidity of cell suspensions (bacterial, yeast) or other particulate suspensions. Typical uses include: Determining cell concentration in fermentation or culture processes Assessing microbial susceptibility (via turbidity changes) Codpfoxup Nhjx Aa Esgp Identifying microorganisms in test systems Measuring optical density / turbidity at a fixed wavelength for dyes or suspensions

Condition: used, Film Densitometer Techkon RT112 without accessories, with battery Cgjdpfx Asr Drtkja Ejp

Condition: new, Year of construction: 2017, height / mm working width / mm Codpfx Aeyn R Tvsa Eegp distance to reflector / mm

Condition: new, height / mm Cgsdpfx Aajyn R R Ij Eop working width / mm distance to reflector / mm SICK DETEC 4 CORE safety light curtains C4C-SA09010A10000 + C4C-EA09010A10000 / NEW Transmitter: C4C-SA09010A10000 Ident No.: 1211475 Receiver: C4C-EA09010A10000 ID No.: 1211515 Condition: New

Condition: new, Year of construction: 2017, height / mm working width / mm distance to reflector / mm Cgedpfx Aeyn R Ruja Ejp

Condition: new, height / mm working width / mm distance to reflector / mm SICK safety light curtains C4000 C40S-1301AA030 + C40E-1301BH030 Transmitter: C40S-1301AA030 Receiver: C40E-1301BH030 Cjdpfjymqrvsx Aa Eogp Operating range: 0 - 5 m Condition: New

Condition: excellent (used), functionality: fully functional, mileage: 1,106,000 km, first registration: 08/2018, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: sleeper cab, emission class: euro6, number of beds: 2, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, blind spot assist, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, hill-start assist, lane keeping assist, navigation system, non-smoking vehicle, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, tachograph, tire pressure monitoring, traction control, Single-owner vehicle, always and exclusively serviced by official DAF workshops, with complete certified invoices and documentation. Equipped with: Cjdpfxeyrqmqe Aa Esgp High-roof cab, automatic transmission, twin fuel tanks, alloy wheels, double bunk bed, internal fridge, leather interiors, stainless steel fittings, full aerodynamic kit, spoiler, side skirts, retarder, double bunk, stainless steel lower and upper trims, roof roll bar with additional LED bar. MAINTENANCE REGULARLY PERFORMED WITH CERTIFIED AND GUARANTEED MILEAGE. Financing available for up to 60 monthly installments at the best rates on the market. This description may inadvertently contain features that differ from the actual specifications, which must be verified on site. In any case, the current information sheet does not constitute a contractual commitment. For more information or clarifications, please call the numbers provided, also available via WhatsApp direct. Mr. Paolo Antonio Gorgoni The photo set is taken on site at our premises; the photos are therefore genuine and reflect the current condition of the vehicle. Please note that the system automatically lists features and accessories, so discrepancies may occasionally occur. To ensure maximum accuracy, we kindly invite you to verify all details directly with us.

Condition: new, mileage: 100 km, power: 290 kW (394.29 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 8,800 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new Mercedes Benz Actros 2540L 6x2 for construction equipment and aerial work platform transport. Truck equipment: - Long-distance driver cab - Auxiliary heating - Safety package - Driver comfort package - Trailer package - Steerable trailing axle - LED rear lights - Euro 6e - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - 1 sleeping bunk - Refrigerator - Navigation - 26,000 kg GVW - Automatic climate control - White - for long-distance transport - etc. Body: - Body manufactured from laser-cut and bent special profiles in low-bed design - Body length approx. 8,800 mm minus toolbox approx. 490 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 track ramps, each consisting of 1 fixed section and 1 extendable section, lateral sliding adjustment, grated surface, mechanical ramp locking with holders on outer frame for non-use (optionally with strap securing) - Ramp operation via electro-hydraulic unit, incl. emergency control at manifold block and hand pump for total system failure - Hydraulic rear supports - All hydraulic functions controlled via radio remote control - Grated floor with increased load capacity - Rear end with bevel – front bulkhead approx. 2,000 mm high with inward-bent profiles - Stainless steel toolbox inside in front of bulkhead - 2 stainless steel side toolboxes on the frame for lashing equipment (1 left, 1 right) - 1 stainless steel toolbox at rear right (for hydraulic unit and control block) Cgjdew E Abnspfx Aa Eop - Work lights: 1 pair on rear cab wall, 2 pairs on frame sides, 2 pairs at rear - 2 sets of steps for access to the cargo area Load securing: - Longitudinal members incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6-ton lashing points integrated into longitudinal members - Outer frame perforated with 2.5 t lashing points - 6 pairs of 6-ton lashing points integrated into the outer frame - 4 x 6-ton lashing points at the rear - 4 x 6-ton lashing points below, in front of the front bulkhead toolbox Paintwork: - Body powder coated in RAL 9005 black (KTL process) - Bulkhead painted in RAL 9005 black - Ramps and gratings hot-dip galvanized Markings: - Reflective tape on sides and rear to EU regulations. Further information available on request.

Condition: new, mileage: 100 km, power: 290 kW (394.29 HP), fuel type: diesel, gearing type: automatic, axle configuration: 3 axles, overall weight: 26,000 kg, loading space length: 8,800 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, color: white, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new Mercedes Benz Actros 2540L 6x2, configured as a construction machinery and access platform transporter. Truck equipment: - Long-distance driver cab - Auxiliary heater - Safety package - Driver comfort package - Trailer package - Steerable trailing axle - LED rear lights - Euro 6e - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - 1 sleeping bunk - Refrigerator - Navigation system - 26,000 kg gross vehicle weight - Automatic climate control - White - Long-distance specification - etc. Body: - Superstructure made from laser-cut and bent special profiles, low-floor design - Body length approx. 8,800 mm (minus approx. 490 mm for storage box) - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 ramp units, each with 1 fixed section + 1 retractable section, ramps can be shifted laterally - Ramp surface made of grating, mechanical ramp locking including bracket on the outer frame for storage (straps available on request) - Ramp operation via electro-hydraulic aggregate, incl. emergency control unit on the control block and hand pump for total failure - Hydraulic rear supports - All hydraulic functions can be operated via radio remote control - Grating floor with increased load capacity - Rear with bevel, front wall approx. 2,000 mm high with inward-bent profiles - Stainless steel storage box inside in front of the front wall - 2 stainless steel side toolboxes on the chassis for lashing equipment (1 left, 1 right) - 1 stainless steel toolbox at rear right (for hydraulic unit and control block) - Working lights: 1 pair on the rear wall of the cab, 2 pairs on each chassis side, 2 pairs at the rear - 2 access ladders for load area access Load securing: - Longitudinal beams with Multi-X contour including lashing points (2.5 t each) - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame with perforated design including 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into outer frame - 4 pcs. 6 t lashing points at the rear - 4 pcs. 6 t lashing points ahead of the front wall storage box (lower side) Paintwork: - Body KTL powder coated in RAL 9005 black Cgsdow E Abhjpfx Aa Ejp - Front wall painted in RAL 9005 black - Ramps and gratings are hot-dip galvanized Markings: - Reflective tape on sides and rear according to EC standards. Further information available upon request.

Condition: new, mileage: 100 km, power: 290 kW (394.29 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 8,800 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new Mercedes Benz Actros 2540L 6x2, configured as a transporter for construction machinery and aerial work platforms. Truck equipment: - Long-distance cab (sleeper cab) - Auxiliary heater (parking heater) - Safety package - Driver comfort package - Trailer package - Steering tag axle - LED tail lights - Euro 6e emission standard - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - Single bunk - Refrigerator - Navigation system - GVW: 26,000 kg - Automatic climate control - White paintwork - suitable for long-distance transport - etc. Body: - Body manufactured from laser-cut and folded special profiles in low-bed design - Body length approx. 8,800 mm, minus tool box approx. 490 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 stretch ramps, each with one fixed section and one extendable section, ramps laterally adjustable - Ramp surface made of grating floor - Mechanical ramp locking including holders on the outer frame when not in use (optionally with strap securing) - Ramps operated by electro-hydraulic unit, including emergency controls on the control block and hand pump for total failure - Hydraulic rear supports - All hydraulic functions controlled via radio remote control - Grating floor with increased load capacity - Rear section incl. chamfer - Front wall approx. 2,000 mm high with inward-folded profiles - Stainless steel tool box installed in front of the bulkhead - 2 stainless steel tool boxes on the frame sides for lashing materials (1 left, 1 right) - 1 stainless steel tool box rear right (for hydraulic unit and control block) - Work lights: 1 pair on cab rear wall, 2 pairs on sides of the frame, 2 pairs at the rear - 2 access ladders for load area access Load securing: - Longitudinal beams with Multi-X contour incl. 2.5 t lashing points - 6 pairs of 6 t lashing points integrated in the longitudinal beams - Outer frame with perforated design featuring 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 pieces of 6 t lashing points at the rear - 4 pieces of 6 t lashing points in front of the forward bulkhead tool box (beneath the floor) Paintwork: - Body KTL powder-coated in RAL 9005 black - Bulkhead painted in RAL 9005 black - Ramps and grating floors hot-dip galvanized Cgjdpfx Aasw E Aawo Ejp Adhesive markings: - Side and rear reflective film in accordance with EC regulations. Further details available on request.

Condition: new, Year of construction: 2024, laser hours: 1 h, laser power: 12,000 W, power: 12 kW (16.32 HP), Description AORE PG-3015: (12 Kw) We can deliver this type Laser cap. from ( 20 Kw) A Compact Design with Complete Protection (CE) table length 3015 mm table width 1550 mm laser head ( BOCI ) autofocus laser capacity Kw 12 overall dimensions 8.250 x 2.880 x 2.320 mm weight of the machine ca. 8.700 kg Furnishing: - Max-photonics Laser source 12 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Boci autofocus cutting head - CYPCUT - software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 12 Kw ) - normal steel 35 max 45 mm - stainless steel 30 mm - aluminium 16 mm - brass 12 mm - copper 10 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 375 mm - Axis speed X / Y: 120 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (12 second max for changing) - automatic change, max load on tables 1.440 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package Cgjdpjvgrl Hefx Aa Eep - cutting from reflective sheet metal materials - 6 part trolly under work table Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - they know from beginning what to respect service, installation and training. - for this machine the installation and training is 1,5 week. Not included. - we can offer cost also depend on end-user place and country. - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 120 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 60 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Official Dealer CNC Top Ten b.v. Stevinweg 11 B 7741KT Coevorden Holland

Condition: new, Year of construction: 2023, Description AORE S-1530: (3 Kw) from stock Europe. table length 3.060 mm table width 1.530 mm laser head Ray-tools autofocus laser capacity in Kw 3 total power requirement 25-30 kW We can deliver from (1 till max 6 Kw) overall dimensions 4950x2280x2130 mm weight of the machine ca. 4.550 kg Furnishing: - Max-photonics Laser source 3 Kw - Cyp-cut- (full option control) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - Nestling, With leapfrog, Edge seeking, Fly cutting - 27" touchscreen, keyboard, control panel - central Lubrication system Cutting capacities: - normal steel 18 mm - stainless steel 10 mm - aluminium 10mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 100 mm - Axis speed X / Y: 80 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm – Acceleration max. 0,8 G table change manual: - table load 800 kg. assisting gases: - mild steel - oxygen (0.5 - 25 bar) Cgsdpfx Aaji Dbq Es Eep - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar)   including: - Compatible suction system - Spare part basic supply package - cutting from reflective sheet metal materials Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - our service team know from beginning how to respect service, installation and training. - for this machine the installation and training is 1 week. Not included in machine price. - we can offer cost also depend on end-user place and country. - Machines for cutting sheets metal - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m / min. - Accelerations up to 0.8 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components Like: - Yaskawa servo drives - Hiwin linear rails - Tongfei water chiller dual use - 2 CCTV camera’s on screen - Auto central lubrication .- Touch screen .-.YYC/APEX rack and pinion .- standard delivery is with power stabilizer - TBI high precision ball screw for Z axis - saw tooth blade table - air and gas pressure real time monitoring - CE declaration Official Seller CNC Top Ten bv Denekamp Netherlands