Used Leake Detector for sale (970)

Condition: used, This listing is for the ATi Portsens111 Gas Leak Detector The unit is in full working condition and is ready for immediate use The ATI PortaSens III is a portable, handheld gas leak detector designed for locating and measuring gas leaks across a wide range of environments—from chemical plants to pharmaceutical labs, food processing facilities, and confined spaces Key Features & Capabilities Interchangeable Smart Sensors Attaches a variety of pre‑calibrated smart sensor modules, each combining sensor, amplifier, and memory into one. These allow detection of 30 to over 60 different gases, depending on configuration Swapping sensors takes under a minute and requires no user calibration Built-in Sampling Pump & Flexible Wand Enables pinpoint detection of leak sources via one‑hand operation Color Touch-Screen Display Features a backlit, graphic or touch-enabled LCD for easy reading in all lighting conditions Data Logging & Connectivity Fedpfexhfqbox Akyopn Includes a 4 GB internal data-logger, capturing millions of data points. Log intervals are programmable from 1 to 60 minutes, with USB connectivity for data transfer Power Options Runs on either rechargeable NiMH “D” cell battery or traditional alkaline D-cell batteries Alarms & Alerts Offers both visual and audible alarms—including low flow and low battery warnings—plus multiple gas concentration thresholds Supported Gases The D16 PortaSens III can detect a broad spectrum of gases, including but not limited to: Toxic gases: Hydrogen sulfide (H₂S), hydrogen peroxide (H₂O₂), formaldehyde, chlorine, sulfur dioxide, ammonia, and others Common industrial gases: Oxygen (O₂), ozone (O₃), carbon monoxide, carbon dioxide Specialty/exotic gases: Arsine (AsH₃), diborane, ethylene oxide, phosphine, silane, bromine, iodine, and more

Condition: used, This listing is for ATI Porta Sens 11 Gas leak detector The unit is in full working condition and ready for immediate use. Reliable handheld gas monitor designed for efficient leak checks across laboratory facilities. Transparency Report and Technical Audit: Fjdpfx Asxv Dh Iekyopn • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Leak test device/pressure test device for ventilation ducts Manufacturer: Airflow UK Type: LM 1 Serial number: 125674 4 meters of hose 230 Volts Fpedpfx Akecxb Haeyjn Documentation available

Condition: used, Helium Leak Detector Manufacturer: Pfeiffer Type: HLT 260 Condition: Tested and ready for use Connection: 230V Fedpjc S D A Tefx Akyspn Delivery time: in stock (subject to prior sale)

Condition: used, Year of construction: 2018, functionality: fully functional, Helium leak detection device. Fodpfsyt Sm Uex Akyjpn

Condition: good (used), For sale: a professional ULVAC HELIOT 701D helium leak detector, designed for precise detection and localization of leaks in vacuum systems, pipes, and industrial equipment. The device is functional. The plastic housing has cracks or damage in several places. All damage is clearly shown in the photos and does not affect the device's operation. Technical specifications from the nameplate: Manufacturer: ULVAC, Inc. Model: HELIOT 701D / Type 701 Serial number: 1711 Year of manufacture: 12/2005 Power supply: 220 V AC Frequency: 50/60 Hz Power: 1.0 kVA Weight: approximately 39 kg Country of manufacture: Japan Available connections: Leak Rate, Sniffer, Ext. I/O, Audio, and Remote Used condition, with visible signs of wear. The device is technically functional but has a damaged plastic housing – please examine the photos carefully. Fpodpfx Aezu Tr Tokyjn

Year of construction: 2020, condition: as good as new (ex-display), Demo tool: SDT 200 ASD (ATEX) Ultrasonic Multifunction Detector Set. Composed of: 1 x SDT 200 (ATEX) receiver with digital display (numeric) for static peak value detection incl. battery block Monitoring indicators for reliable diagnostics in wear monitoring: RMS. PEAK and Crest factor, integrated data logger for 4000 measurements at 500 locations (grouped by sensor, date and time) 1 x Charger 1 x Peltor Headphones 130 dB 1 x Shoulder Strap 1 x Directional Probe (Screw Tip & Rubber Tip) 1 x plastic case with insert 1 x Instruction manual on USB stick Fpsdpepyg Saofx Akyon 1 x USB cable for data transfer 1 x calibration certificate (as of 02/2020) 1 x Flexible sensor Atex 550 mm with replaceable sensor head 1 x Spiral Cable 1 x Funnel Directional Probe for SDT200 1 x leakage trailer 1000 pieces (to mark compressed air leaks) Other leakage meters on request. Visit our store. We always have a wide range of new and used compressors in stock!

Condition: used, Year of construction: 2019, Manufacturer : ACS Instrument Model: 7400S Year : 2019 Type : Leak test bench / automatic and autonomous leak detector Application: Integrity test for flexible containers (flexible packaging, pouches, envelopes, etc.) EM delta P: +- 5000 Pa Pressure test: -55 hPa to 950 hPa Motor power : 0,75 kW The cup is placed in a sealed enclosure. A vacuum is applied in the enclosure, causing the cup to inflate. The inflated cup is clamped between the two horizontal walls of the enclosure and exerts a force on the internal pressure sensor. The force exerted on this sensor is the image of the internal pressure of the cup. The leak test consists of measuring a variation in the force on the internal pressure sensor between the start and end of the stage. A touch screen for controlling and setting the instrument parameters. A USB key for exporting results. Fsdpfjx R Dfxjx Akyepn Documentation available

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 Fjdpfxjyq Rkyo Akyjpn High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: like new (used), Year of construction: 2022, Helium leak detector Fpjdpfxet Urlro Akyjn Manufacturer: Leybold Type: Phoenix Quadro EU Condition: As good as new Ready for use from 2022 unused Connection: 230V Delivery time: ex stock (u.ü.V.)

Condition: excellent (used), Year of construction: 2016, Loma Systems Metal Detector with Rejector Fedpfx Ajv T Ah Eokyopn Model: IQ³ Model conveyor: MD Conveyor, serial number: G7B3C2RS-35150D Year of construction: 2016 220-240 V, 1 Ph, 50/60 Hz, 3 A Belt width: 300 mm, clearance: 350 mm x 150 mm Total dimensions: 2020 mm x 1080 mm x 1120 mm

Condition: excellent (used), Year of construction: 2012, Lock met 30+ Throat / Vertical Fall Metal Detector The MET 30+ UNIVERSAL compact vertical fall system can be installed at the beginning of the production line to inspect materials in bulk powder or granule form or anywhere for free falling products. Fedpfou Dntljx Akyjpn • Detects real-life contaminants • ATEX zone 21 approved • Throughput up to 50 tonnes per hour • Quick release sealed valve or cowbell reject mechanisms available • Sealed to IP 66 for washdown applications

Condition: used, Ishida Checkweigher and Metal Detector Fully stainless steel Reject bin Weighing range - 0 to 1200 grams 240 volts Fpjdpfsxtfymsx Akyen

Condition: excellent (used), INFICON Sensistor ISH2000 Hydrogen Leak Detection System Manufacturer: INFICON Type: Sensistor ISH2000 Article Number: 590-750 Device Type: Hydrogen Leak Detector Description Professional hydrogen leak detection system consisting of INFICON Sensistor ISH2000, INFICON TGF10 Tracer Gas Filler, and AP57 Search Probe. The system is used for industrial leak testing using the hydrogen tracer gas method. Technical Data Supply: 100 - 240 VAC Frequency: 50 / 60 Hz LCD display Printer port Probe control port TGF10 Tracer Gas Filler Tracer gas pressure: 0 - 9 bar Compressed air supply: 4 - 8 bar Evacuation rate: 70 Nl/min Filling rate: 600 Nl/min Ultimate vacuum: -0.85 bar Fodpfx Akezdggwjyspn Weight: approx. 4.7 kg Equipment Sensistor ISH2000 TGF10 Tracer Gas Filler AP57 Counter Flow Probe Connection cable Power cable Original packaging Accessories as shown in the pictures Application Areas Leak testing of pipelines Heat exchangers Pressure vessels Refrigeration and air conditioning components Automotive industry Industrial and testing facilities Condition Used Visual condition as shown in the pictures Normal storage and usage marks present Scope of delivery as shown in the picture. Changes and errors in the technical data and prior sale are reserved.

Condition: excellent (used), Pfeiffer Pfeiffer Vacuum HLT 560 Helium Leak Detector Professional leak testing, sniffer & vacuum modes with backing pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Description: For sale is a professional helium leak detector, Pfeiffer Vacuum HLT 560. This device is designed for high-precision leak testing using helium and is typically used in industry, manufacturing, quality assurance, laboratories, and technical service applications. It is capable of reliably detecting even the smallest leaks. The HLT 560 uses mass spectrometry and can be operated in both vacuum and sniffer modes. With the sniffer probe, leak locations can be pinpointed, while in vacuum mode, entire assemblies or systems can be inspected. Integrated turbopump and backing pump make this unit a complete, mobile testing system. Application areas (examples): • Leak testing of components and assemblies • Testing of vacuum chambers, pipelines, valves, heat exchangers • Quality control in production • Service and maintenance of vacuum technology systems Technical Data: Manufacturer: Pfeiffer Vacuum Model: SmartTest HLT 560 Integrated turbopump Backing pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Test gas: Helium Measuring principle: Mass spectrometric helium leak detection Operating modes: Vacuum operation / sniffer operation Reference leak rate: (7.4 ±15%) × 10⁻⁷ mbar·l/s Dimensions (approx.): Fodjzix Hxjpfx Akyepn Height: 110 cm Width: 50 cm Depth: 60 cm Interfaces: RS232, RS485, Relay I / II, gauge connection Power supply: 230 V / 50 Hz Power consumption: approx. 400 VA Weight: approx. 70 kg Condition: used Scope of delivery: (see photo) (Specifications and technical details subject to change and errors!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Cintex Metal Detector Model - Sentry In excellent condition Belt dimensions 1800 belt x 500 Fodpfxezzk Ure Akyepn Aperture head 510mm W x 310mm high Alarm and stop feature This metal detector has retail and wholesale specifications Test pieces included

Condition: used, Year of construction: 1982, operating hours: 1,234,567 h, machine/vehicle number: 228072, clamping force: 1,600 kN, operating pressure: 200 bar, heating capacity: 25 kW (33.99 HP), Used rubber injection molding machine, Werner & Pfleiderer. Original control system and machine are in good working order, but the hydraulics have a significant oil leak and need to be repaired. Heating plate size: 450 x 500 mm, electrically heated. Temperature control has been replaced. Core puller: hydraulic at the top, mechanical at the bottom. Opening stroke: 560 mm. Cylinder temperature control units are not included. Other visible items in front of and behind the machine are not part of the auction. Removal must be arranged independently. Fpjdez N Sx Tspfx Akysn

Condition: good (used), Fortress Phantom Metal Detector Fodpjxtfw Ssfx Akyepn Fully stainless steel Aperture 500mm wide x 225mm high 1500mm long Belt Stop and alarm Video available on request

Condition: used, Year of construction: 2022, Loma IQ3 metal detector on conveyor, built in 2022 Fjdpfx Akjz Nc Tmoyepn This Loma IQ3 metal detector is mounted on its own conveyor with a 300 mm wide modular belt and a reject bin. The aperture is 350 × 100 mm (w × h), the belt is 2,300 mm long. The detector is operated via the touchscreen on the detector head. Located in Emmeloord, the Netherlands. Available on request, price on request. More photos and full specifications: / Type: Metal detector with conveyor Aperture: 350 × 100 mm (w × h) Belt width: 300 mm Belt length: 2,300 mm Dimensions: Approx. 2,300 × 900 × 1,450 mm (l × w × h)

Condition: good (used), functionality: fully functional, Equipment: type plate available, 100,000 liter tank, used, double-walled, good condition, ready for immediate use, cleaned - certificate from specialist company available Length: 15.74 m Diameter: 2.90 m Height: 3.10 m - Transport height - Access ladder - Platform with railing - Firmly welded saddle feet - Ventilation - Limit value transmitter - Dipstick - leak detector Loading and transportation can be offered. Only serious and serious inquiries will be answered: Fpodpfx Asuzvyuskysn Name, e-mail address and telephone number.

Condition: used, Year of construction: 2021, Minebea Intec metal detector on conveyor, built in 2021 Fjdpoz Nc Ttefx Akyjpn This Minebea Intec metal detector is mounted on a mobile conveyor with a 350 mm wide modular belt, a reject unit and a roller section at the outfeed. The aperture is 400 × 165 mm (w × h), the belt is 2,100 mm long. The conveyor has a transparent guard over the belt. Located in Emmeloord, the Netherlands. Available on request, price on request. More photos and full specifications: / Type: Metal detector with conveyor Aperture: 400 × 165 mm (w × h) Belt width: 350 mm Belt length: 2,100 mm Dimensions: Approx. 2,400 × 1,200 × 1,200 mm (l × w × h)

Condition: used, Year of construction: 1982, operating hours: 1,234,567 h, machine/vehicle number: 223577, clamping force: 800 kN, operating pressure: 200 bar, Used rubber injection molding machine, 80 tons. Werner & Pfleiderer, original control system. Machine runs well, but the hydraulics have an oil leak and should be repaired. Heating plate size: 300x400 mm, electrically heated. Core puller on top and bottom, hydraulically operated. Opening stroke: 360 mm. Injection volume: approx. 400 g. Cylinder temperature control units are not included. Fedpoz N Sykefx Akyopn Other visible items in front of and behind the machine are not part of the auction. Removal must be arranged by the buyer.

Condition: good (used), Year of construction: 2013, 1 x Loma IQ3 Metal Detector, and CW3 checkweigher combination unit Year: 2013 Aperture: 450mm wide x 170mm high Fodpfxjz Nl A Es Akyopn Weighing range: 20g-10,000g Located in Melksham, Wiltshire

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For sale is a leak testing device from the brand JW Froehlich in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: JW Froehlich • Model: MPS-200 • Testing method: Relative pressure measurement. Optional measurement methods: pressure drop, pressure increase, overpressure, underpressure. • Testing pressure range: approx. -0.8 to 6 bar • 6.5" color monitor with touchscreen and Windows operating system • Year of manufacture: 2014 • Documentation: Leak testing seminar • Condition: Used, functional Shipping costs via freight forwarder: approx. €90 If interested, a leak calibrator LK-20 is also available! International buyers are welcome! You will receive an invoice with VAT shown. Fedpez I Db Aefx Akyopn Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from the location 42855 Remscheid, free on board. Errors in technical data and prior sale are reserved.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 1 x Loma Systems IQ2F / IQ3 twin-head metal detector with alarm and belt stop on detect reject system, mounted on a height-adjustable frame. Fpjdpfxsy Hinkj Akyen Manufacturer - Loma Systems Date of manufacture - 2010. Serial number IQ3 standard head - MD301-12429D. Aperture dimensions: IQ2F Ferrous-in-foil head - 370mm wide x 135mm high (105mm useable) / IQ3 standard head - 350mm wide x 150mm high (115mm useable). IQ3 standard head frequency - Variable. Handing - Left to Right. Belt type - rubber. Belt dimensions - 2600mm long x 300mm wide.