Used Reflective Densitometer for sale (419)

Condition: used, mileage: 1,200 km, power: 200 kW (271.92 HP), first registration: 09/2025, fuel type: diesel, Year of construction: 2025, Equipment list: * Axle ratio i = 6.377 * Differential lock on front axle * Trailer brake, dual-line * Rear mounting brackets * Comfort steering (electrohydraulic power steering) * Front mounting plate EN15432-1, Type F1/C * Wheelbase 3,150 mm * VarioPilot (dual steering, left/right interchangeable) * Side underrun protection * Air-suspended comfort seat with seat heating, passenger side * Air-suspended comfort seat with seat heating, driver side * Additional left stalk switch * Right armrest with control lever mounting, driver’s seat * Plug-in control lever on driver’s seat armrest * Universal bracket for external control unit Dcodpfx Afjwtgyqo Ion * Side-sliding center console, additional storage compartment * Air conditioning system * Activated carbon filter * Constant current sockets 12V (C3), 12V and 24V center console * On-board 24V/25A socket in cab, with C3 signal * Front camera * Rear view camera at end of towing vehicle * Monitor for camera system * Universal electrical interface per EN16330 * Battery master switch on battery box * ABS trailer socket 24V, 7-pin / 5-pin * Trailer socket 12V, 13-pin * Front socket 24V, 7-pin * Reversing warning system * Cab strength compliant with ECE-R-29/03 * Mowing door on right and cab prep for mower seat * External sun visor, transparent * Clear, heated windscreen * Transmission oil cooling, oil/air * EasyDrive (hydrostatic drive) (SN) * Automatic Shift (EAS) * Hydraulics for tipper body * age, 2-circuit, 3-cell, full prop, snowplow relief * Tipping cylinder * Rear hydraulic coupling, 4-way, cell 1+2 * Pressure line at rear, 2nd hydraulic circuit * Separate return line at rear * Hydraulic quick couplings ISO 7241-1 A / ISO 5675 * Implement carrier series * Compaction stage (4-5) 11 UG1 300/400 medium * Compaction stage (6) 0 * Compaction stage (7-8) 12 chassis LL * UNI-TOUCH operating system with 10.5" touchscreen * Combination instrument, 12.7 cm, with video function * Digital tachograph, 2nd generation, version 2, ADR * Tachograph manufacturer: VDO * Seatbelt warning, driver and passenger * Warning light for telescopic cylinder * Digital radio with USB port and Bluetooth * Truck Data Center 8, base * Driver assistance card, Europe region * Pre-installation for Truck Data Center 8, base * AdBlue tank 25 l * Warning beacons, LED, yellow, left and right, with tripods * Additional LED high beam, roof bar mounted * Work lights, upper cab rear panel, LED * Additional, height-adjustable headlights on A-pillar, LED, heated * Engine OM936, inline 6, 7.7 l, 200 kW (272 hp), 1,100 Nm * Engine specification Euro VI, E * High Performance Engine Brake * Clean-Fix rapid radiator cleaning system * Engine PTO including front PTO * Dropside body, internal dimensions 2,385 x 2,075 x 400 * Subframe for dropside body * Increased trailer load, ZAA max. 20t * Heavy-duty tow hitch, large jaw, ring type, 38.5 mm bolt * Flatbed rims 10.00V-20 * Warning stripes red/white, retroreflective * Warning triangle and beacon * Attention Assist * Traffic Sign Assist * Tire pressure monitoring system * Sideguard Assist 2 * Frontguard Assist * Pre-installation for alcohol interlock * First aid kit * Weight variant 14.0 t (7.1/8.0) * Vehicle version according to GSR, phase B * Manufacturer’s warranty: 2 years from initial registration/commissioning * Instruments/labels/manuals in German Other notes: * Trade-in and purchase of vehicles and machines possible. * Sales price excludes transport * No liability for typographical and printing errors. * S

Condition: used, overall weight: 35,000 kg, maximum load weight: 29,400 kg, axle configuration: 3 axles, loading space length: 8,700 mm, loading space width: 2,350 mm, loading space height: 1,900 mm, loading space volume: 35 m³, first registration: 05/2020, Year of construction: 2020, Equipment: ABS, Air, lift, BPW-disc, EBS, aluminum drop-leg, PVC half-shell mudguards, 2x WZK, side underrun protection right, climbing ladder, foldable underrun protection made of aluminum, reflective sign, aluminum rims, loading pressure gauge, aluminum trough, floor 10 mm, wear plate on floor 7 mm, side walls and front wall 7 mm, side wear plates, rear wall 10/5 mm mounted, Cramaro tarpaulin frame Dsdpfswqaupsx Af Iscn

Condition: used, Year of construction: 2010, The machine is currently operational and available for inspection at any time. CNC Laser Cutting System TruLaser 3030 3200 Watt X-axis working range max.: 3000 mm Y-axis working range max.: 1500 mm Z-axis working range max.: 115 mm Control: Siemens Sinumerik 840D Laser power: 3200 watt Operating hours: 75,000 hours Sheet thickness St. max.: 20 mm Sheet thickness Ss. max.: 12 mm Sheet thickness Al. max.: 8 mm Standard equipment: - Enclosed machine frame with integrated laser unit - Laser unit: CO2 laser TruFlow 2000, high-frequency excited, maintenance-free turbo radial blower, reflective telescope, cooling unit, tracking log function - Automatic pallet changer - Longitudinal conveyor belt for small parts/scrap - Drives: Maintenance-free three-phase servo motors - Quick-change device for cutting head - Laser cutting head with 5" lens and additional 7.5" lens - Programmable cutting gas pressure control - Control Line - Focus Line - Laser power control - Laser diode positioning - Nitrogen Line - Sprint Line - Contour Line - Plasma Line - Automatic sheet edge detection - Programmable power cycles - Microwelding - Automatic shutdown - Work area lighting - Workshop programming Dcodpfx Aexc It Ujf Isn - Safety: Multibeam light barriers, fully encapsulated and ventilated beam guide, monitoring system, multi-chamber extraction and compact dust extractor, protective enclosure - Network connectivity via teleservice installation (RJ45) - 3.5" disk drive

Condition: new, Year of construction: 2025, functionality: fully functional, working range: 6,500 mm, type of input current: three-phase, total width: 1,629 mm, total height: 2,525 mm, total length: 10,500 mm, table length: 6,500 mm, overall weight: 3,500 kg, pipe diameter: 220 mm, power: 15 kW (20.39 HP), laser power: 6,000 W, warranty duration: 24 months, Equipment: cooling unit, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile & Tube Laser Center 6500 x 15 – 160 mm Format skytube-pro-6500×3 Profile and Tube Laser Fiber Laser Metal Cutting – fast material change with up to 6kW, delivering effective performance for your production, is the smart and efficient tube laser processing solution. Capable of laser cutting round tubes, square tubes, rectangular tubes, open profiles, and special profiles, this laser machine ensures maximum productivity during production changeovers. Task: Fiber laser up to 6kW for a wide range of metalworking applications! Unrivaled Laser Cutting Performance High axis speeds and accelerations, combined with a robust mechanical structure, ensure outstanding cutting performance and precision. The tube and profile laser processing machine for production offers a compact footprint – simply smart! Ingenious solutions, 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm – 3D cutting with efficient fiber laser technology. The semi-automatic 6-position profile-tube loading chain system allows fast job changes. With the optional bundle loader, you work independently. Bevel Cutting A revolutionary feature. With the ability of our machines to swivel their cutting head up to 50° on an additional fifth axis, we provide the solution to one of the biggest challenges in modern profile processing. If the laser beam always strikes the tube at a right angle, you end up with an elliptical cut edge. With the capability to swivel the tube laser cutting head, together with the feed axis, completely angled cuts are now possible. Of course, when working with the skyTUBE Laser, safety comes first! The skyTUBE Pro is a Class 1 laser system. There is no risk of contact with laser emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and directives. Dcodpfx Aorh Iw Tsf Ien Technical Specifications: · Closed industrial housing, Class 1 laser (optionally Class 4) · Working area, tube cutting system/chuck: Round tubes 15–160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on the tube: X 6500 mm, Y ±100 mm, Z 150 mm, A ±360°, U ±50° · Automatic material feed: up to 6 x 160 mm profiles, lengths 3500–7000 mm · Automated material unloading system for profile sections, construction adjusted to profile length · Z drive: ball screw axis system / with PTI SVZ system · X/Y drive: linear axis system / with PTI AC-SERVO system · Productive cutting speed: depending on material and laser combination, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ± 0.03 mm · Max. footprint dimensions (LxWxH): 11,600 mm x 2,830 mm x 2,100 mm + unloading system according to profile section length

Condition: new, Year of construction: 2025, fuel type: diesel, gearing type: automatic, Equipment: head guard, Moffett type: M4 25.3 NX 2-way off-road machine lifting and load capacity 2,500 kg at LSP 600 mm permanent all-wheel drive with switchable differential lock Power source: - 3 cylinder Kubota diesel engine D1305, 18.4 kW / 25 HP in accordance with EU emission standard Stage V Lift mast: - Duplex mast with roller bearings for low wear Height: - Lifting height 3,040 mm Sideshift: - 65 mm sideshift per side above lift mast Fork carrier width: - 1,300 mm fork carrier Feed system: - Telescopic forks Fork dimensions: - RE4-45 1600/1200 FEM3A - Basic length: 1,600 mm Dcsdpfevrafrox Af Ijn - Extension: 1,200 mm - Total length: 2,800 mm Fork adjustment: - The distance between the forks is infinitely adjustable using the cylinders integrated in the fork carrier, extra operating lever Wheel arms: - Fixed wheel arms with a length of 1,135 mm including 100 mm extension, wheel base 1,700 mm - Supports increase the LSP to 600 mm in front of the wheels Wheel arm opening: - 1,620 mm Tire combination: - Front wheels 23x8.5-12 height 585 mm width 200 mm - Rear wheel 27x10-12 height 690 mm width 255 mm, 200 mm ground clearance Filling: - Front air / rear air - Driver's cab: Foldable driver's seat with universal seat cover including scanned lap belt in accordance with EC directive, driver protection structure in accordance with ROPS and FOPS in accordance with ISO 3471 & 6055, with polycarbonate roof and side protection bars - Valve bank with operating sequence for static mast devices - Lifting-tilting-sideshift-forward-supports, high-quality wide-angle mirror mounted in the driver's cab, foot pedals for driving direction control and speed control Dashboard: - Operating hour meter, digital temperature and fuel gauge in the dashboard as well as control lights and ignition lock. Toggle switches with IP64 protection enable reliable operation of the 12V lighting, differential lock and parking brake. 12V lighting: - Work lights to the front and rear, rotating beacon designed as a flash light, street lighting in accordance with the StVo, battery isolator switch mounted in the engine compartment 24V lighting: - Repeat lighting consisting of rear light, brake light, rear fog light, reversing light and indicator, reflector round, red, Ø 60 mm for solo vehicle, reflective side marking, clamp holder for repeat license plate with lighting, LED adapter for communication with the towing vehicle 24V connection: - 2x 7-pin sockets and spiral cable, sockets in the footwell Extra safety: - Work lights and rotating beacon are coupled to the 24V of the towing vehicle. This offers increased safety when maneuvering, ground start enables attachment and detachment from the side from the ground. Safety systems: - Moffett standard Color: - Moffett red, forklift in primer, phosphated and subsequently powder-coated. - Mast, driver protection and attachments powder-coated in RAL 7016 anthracite gray. Mounting kit: - Machine designed for the Moffett mounting systems Hydraulic oil: - Hydraulic tank with RKM filter, filled with HLP 32 hydraulic oil Mounting accessories: - Chain pin for static mast Chain bracket mounted on the center of gravity of the frame, lashing chains with 1 hole base plate, length 766 mm including bolts, nuts, cotter pin and retaining bolts for vehicle

Condition: used, Year of construction: 2015, sheet width 3080 mm plate thickness 16.0 mm thickness at "Niro-steel" 12.0 mm no. of strokes 7 - 12 Hub/min cutting angle 0.5 - 2.5 ° back stop - adjustable max. 1000 mm traversing speed 200 mm/sek down holder 14 Stück work height max. 840 mm Column width 3420 mm throat 350 mm Control D-Touch 7 oil volume 450 l voltage 400 V engine output 45.0 kW weight 18150 kg Djdpfxsxab Ruj Af Ijcn range L-W-H 4130 x 2210 x 2570 mm Good / well-maintained condition (!!) New price ~ €120.000 Special price upon request Features: - Robust electro-hydraulic sheet metal shear ("guided") - CNC control unit D-Touch 7 ("touchscreen") * Anti-reflective robust 7" color touchscreen control panel * Easy positioning to the desired size * Positioning accuracy 0.1 mm * Unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target values * Backgauge retraction function * Cutting length control via adjustable stroke length * Cut counter * Automatic machine stop when the programmed cuts are reached - CNC electro-motorized adjustable backgauge * Travel range max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - CNC electro-motorized cutting gap adjustment - CNC Electro-hydraulic cutting angle adjustment - Heavy-duty welded steel construction - Ergonomically positioned and clearly laid-out control panel - Hold-down clamp positioned close to the cutting edge - Front light barrier (instead of finger guard) - Self-regulating hold-down clamp pressure - Rear safety device (light barrier) - 1x side stop (L = 1,500 mm) - 2x support arms (L = 1,000 mm each) - Wide sheet supports with ball transfer rollers - Mobile foot switch with emergency stop function - High-quality, regrindable blades (split) - Rear sheet chute - Original operating instructions

Condition: used, Year of construction: 2022, operating hours: 1,997 h, power: 118 kW (160.44 HP), Operating hours: 1,997, First registration: 06.03.2023 Standard equipment CityCat 5006 Driver's cab: Comfortable, sound-insulated cab mounted on hydromounts. Windscreen made of heat-insulating, curved, low-reflection safety glass. Two sliding windows in each door. Multi-stage heating blower. Sun visor. Windscreen wiper with washer system. Air-suspended driver’s seat and suspended passenger seat, both individually adjustable. Steering column adjustable for angle and height. Clearly arranged and ergonomically positioned control and monitoring instruments with a 7'' color display. Visual and acoustic warning system for temperature and fluid level monitoring. Visual diagnostic system with intuitive design. Steering: Hydrostatic four-wheel steering with hydraulic power assist. Axles: Rear axle as a steering drive axle with differential. Front running axle with coil springs and shock absorbers. Hydraulics: The latest electronic control concept enables consumption- and noise-optimized control of the diesel engine for a hydrostatic drive across the entire speed range without any loss of performance. Djdpfx Afei Haqho Iecn Brakes: Hydraulic dual-circuit braking system with hydraulic servo assistance. Disc brakes front and rear. Hydraulic spring-loaded parking brake on the rear axle. 4 brake calipers at the front and 2 at the rear. Sweeping intake: Intake principle, suction type, with trailing, stainless steel suction mouth positioned in front of the axle, combined with side brushes, hydraulically adjustable laterally by 400 mm. Continuously variable high-performance suction fan. Sweeping container: Container volume 5.6 m³, hydraulically tiltable and lockable. Discharge height 930 mm. Discharge height (high dump) 1,550 mm (optional). Discharge width 1,700 mm. Discharge angle 51°. Water system: Water tank approx. 880 l. One water pump for water nozzles. Sweep brushes: 2 sweeping brushes left and right Ø 900 mm. Stepless speed adjustment 0-150 rpm with collision protection. Special equipment: - Standard color RAL 2011 orange - Hydraulic suction pipe flap - Leaf grid lifting device for raising and lowering the leaf grid in the debris container via hydraulic hand pump - Easyclean, rapid cleaning system for cleaning the container side walls, fan, recirculation, and leaf grid - Third front brush, reinforced version with linear displacement, tilt adjustment in both directions, adjustable contact pressure, greater reach, increased sweeping area - Leaf suction hose, side-mounted, length 3.5 m, diameter 160 mm, can be mounted on either side - Fully integrated, CFC-free air conditioning - Heated and electrically adjustable wide-angle and main mirrors - Additional right-hand side brush mirror - Reversing camera and suction mouth camera - Cruise control for improved work ergonomics and increased productivity - Deluxe ISRI driver's seat with headrest, weight adjustment via control valve - LED beacon on cab, mounted with flexible bracket to fold away on obstacle contact - LED beacon at rear on body, flexible bracket allows folding away in case of collision - LED working lights on left & right brushes - LED spotlight for suction mouth - Joystick swap for front and side brushes, allowing interchange - Water connection with spray nozzle...

Condition: used, overall weight: 35,000 kg, maximum load weight: 29,400 kg, axle configuration: 3 axles, loading space length: 8,700 mm, loading space width: 2,350 mm, loading space height: 1,900 mm, loading space volume: 35 m³, first registration: 05/2019, Year of construction: 2019, Equipment: ABS, Air, lift, BPW disc, EBS, aluminum drop support, PVC half-shell mudguards, 2x WZK, side collision protection on the right, leaning ladder, UFS foldable made of aluminum, reflective plate, aluminum rims, loading gauge, aluminum trough, floor 10 mm, wear plate on the floor 7 mm, side walls and front wall 7 mm, side wear plates 5 mm, rear wall 10/5 mm overlay, Cramaro covering frame Dcsdpfxorxa Nps Af Ion Several vehicles with the same year of construction and equipment are available.

Condition: used, fuel type: diesel, Field of application: Construction Generator capacity: 818 kVA Frequency: 50 Voltage: 230 Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Dcedjxcfgrjpfx Af Ijn Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: new, overall weight: 42,000 kg, maximum load weight: 33,190 kg, axle configuration: 3 axles, Equipment: ABS, Frame * Standard ladder-type frame of lightweight steel construction with cross members inserted through the frame * With camber (pre-camber) in the chassis frame * Coupling plate approx. 8 mm thick, with a 2-inch kingpin compliant with DIN 74080 / ISO 337 Running Gear * For indivisible loads, an increase in the total towing weight is permitted * Axle lift mechanism on axle 1; control of axle lift fully automatic, load-dependent * Make: Kögel (or as specified by customer) * Tri-axle assembly with disc brakes, diameter approx. 430 mm, offset approx. 120 mm * Air suspension with approx. 180 mm of travel Vehicle Tires * Wheels with internal sensors in compliance with UN ECE R141 * 6 x 385/65 R 22.5 UNIROYAL TH 50 tires * 6 steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120) Chassis Attachments * Landing legs (make as specified by customer, Kögel) mechanical, with compensating foot, lifting capacity approx. 24 t. Single-sided operation, right side in direction of travel * Spray suppression system in accordance with (EU) Regulation No. 109/2011 * 1 pair of quarter-circle mudguards in front of the axles * 1 pair of straight mudguards with spray flaps between the 1st and 2nd axles * 1 pair of quarter-circle mudguards with spray flaps behind the axles * 2 wheel chocks with holder * Side underrun protection to ECE-R73 * 2 plastic toolboxes, waterproof, internal dimensions approx. 545 x 400 x 400 mm. Mounted at the rear, 1x left and 1x right * Retractable access ladder at rear right * Tall, rigid under-run protection at the rear made of steel to ECE-R58 * 1 pair each of extendable warning signs for oversize loads, retro-reflective red/white, with LED lighting, spiral cable and plug connection. Positioned at the front and rear of the vehicle Brake / Air Suspension System * 32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connector ISO 7638 (without connecting lines), parking brake as spring-actuated brake, external pneumatic connections, and external EBS diagnostic connector via ISO 7638 plug * EBS system (make as specified by customer, Kögel) * Air suspension system incl. 1 lift and lower valve, installed on the left in direction of travel, behind the axle assembly. Driving position self-adjusts automatically * 2 non-interchangeable coupling heads in front ISO 1728 * Air tanks for brake system and air supply made of steel (EN 286-2) Floor * Floor plates approx. 30 mm thick Djdpfx Afoxcdmqe Iscn * Floor all around with sealed joints * Stake pockets for square insert stakes approx. 80 x 80 mm, arrangement as per drawing J9: 8 stake pocket strips (18 stake pockets per strip: 4 outside + 10 in the middle per strip) Front Wall * Storage for max. 14 square insert stakes approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall * Front wall approx. 2,000 mm high with volume corner posts made of steel, with profiled steel sheet, bolted/riveted to the frame. 2 pairs of lashing points (permissible lashing capacity approx. 1,000 kg per ring) on the front wall as per EN 12640 Side Wall * VarioFix steel slotted external frame * 24 pairs of lashing rings in the external frame (to EN 12640), permissible lashing capacity approx. 5,000 kg per ring Bumper Protection * 1 pair of steel buffer bumpers approx. 160x85x85 mm mounted outside on rear frame end plate * Cross member steel angle galvanized as forklift protection and central lock cam protection, mounted on rear frame end plate Electrical / Electronics * Steel light

Condition: new, overall weight: 29,500 kg, maximum load weight: 17,500 kg, axle configuration: 2 axles, loading space length: 15,600 mm, loading space width: 2,500 mm, loading space height: 4,000 mm, Year of construction: 2025, total width: 2,550 mm, total height: 3,250 mm, Equipment: ABS, Wiese Eroglu V.2 Car Transporter NEW Edition!! Factory-new ER/TA 2-axle stepped semi-trailer/car transporter Weights: Permissible gross weight: 29,500 kg Djdjwv Tyijpfx Af Ijcn Unladen weight: 12,000 kg Payload approx.: 17,500 kg Dimensions: Length approx.: 13,600 mm Width approx.: 2,500 mm Rear extension approx.: 1,500 mm Specification: Chassis: Sturdy, weight-optimized welded steel construction Hot-dip galvanized finish Floor/lanes made of automotive perforated sheets Sufficient lashing points Painted outer frame and stanchions in RAL 9005 black Designed for transporting up to 6 cars 2 x 9 t SAF axles with drum brakes Air suspension with lift/lower function Wabco brake system incl. EBS Tire pressure monitoring 8x 235/75 R 17.5 tires Spare wheel 2 folding supports Electric winch incl. deflection Lighting system according to EU standards, LED version by Aspöck Air and electrical connections at the front bracket Lighting connections: 2 x 7-pin and 1 x 15-pin Rear rotating beacon 2 integrated toolboxes between the axles 2 integrated toolboxes in the step area Reflective tape in accordance with EU standards Austrian warning plates at the rear Body: Fully hydraulic lifting platform with fixed front columns Spindle-type construction at the front 2 fully hydraulic lifting platforms after the step and in the rear section The rear lifting platform includes rear extension Fully hydraulic operation via hydraulic cylinders All lifting platforms hot-dip galvanized Wheel recesses at the front Fold-out elements at the rear Hydraulics operated via NATO socket Teleradio wireless remote control Load securing certificate according to DIN EN12640 If you have any further questions, our sales staff will be happy to assist you.

Condition: used, Year of construction: 2020, type of input current: AC, input voltage: 230 V, fuel: domestic gas H, frequency: 50 Hz, Zenith 46kw dark radiator 12-15 meter black radiator ZENIT-46/L dark radiator 15m long for sale in mint condition. complete unit with heat-reflecting shade, spacers, hangers, chimney if required make PAKOLE Zenit 46/L year of manufacture: 2020 heat output: 46kw pipe length: 12-15 meters Dcjdpfxoudldfe Af Isn p connection: 360mbar Connection voltage: Max. current consumption: IP21 AC 230V 50Hz

Condition: excellent (used), Perkin Elmer PerkinElmer Lambda 950 UV/Vis/NIR Spectrometer – High-Precision Laboratory Instrument For sale is a PerkinElmer Lambda 950 UV/Vis/NIR spectrometer, a top-of-the-line model for demanding measurements in the ultraviolet, visible, and near-infrared range. This device is ideally suited for material analysis, optical coatings, reflection and transmission measurements, as well as numerous other applications in research and industry. Special features: Thanks to its modular design, the instrument can be optimally adapted to specific measurement tasks – ideal for research institutions, universities, and high-tech industries. Technical highlights: - Wavelength range: 175 – 3300 nm - Resolution: up to ≤ 0.05 nm (UV/Vis), ≤ 0.20 nm (NIR) - Light sources: Deuterium and tungsten-halogen lamp - Detectors: Photomultiplier (UV/Vis), PbS detector (NIR, Peltier-cooled) - Extremely low stray light: ≤ 0.00007 %T at 220 nm - Modular expandability (integrating sphere, URA, large sample chambers, and much more) Technical specifications: - Dimensions (W × D × H): 1,020 mm × 740 mm × 300 mm - Sample compartment (Primary): 200 mm × 300 mm × 220 mm (W × D × H) - Sample compartment (Secondary): 480 mm × 300 mm × 220 mm (W × D × H) - Weight: approx. 77 kg Condition: used Scope of delivery: (see picture) - PerkinElmer Lambda 950 spectrometer - Standard accessories (sample holders, cables) Dcedow T Sm Uepfx Af Isn - Operating software & manual (Subject to changes and errors in the technical data. All information without guarantee!) For further questions, feel free to contact us by phone.

Condition: used, overall weight: 36,000 kg, maximum load weight: 30,380 kg, axle configuration: 3 axles, loading space length: 8,700 mm, loading space width: 2,350 mm, loading space height: 1,900 mm, loading space volume: 35 m³, first registration: 02/2022, Year of construction: 2022, Equipment: ABS, Air, lift, BPW disc, EBS, aluminum drop support, PVC half-shell mudguards, 2x WZK, lateral collision protection on the right, leaning ladder, UFS foldable made of aluminum, reflective plate, aluminum rims, loading pressure gauge, aluminum trough, floor 10 mm, wear plate on the floor 7 mm, lateral wear plates, rear wall on top, Cramaro covering frame Several vehicles with the same year of construction and equipment are available. Dcjdpfxorxa Ntj Af Ijn

Condition: used, fuel type: diesel, Field of application: Construction Generator capacity: 1.010 kVA Frequency: 50 Voltage: 230 Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Dcjdsxcfglepfx Af Ijn Wide range of stock that can be supplied immediately.

Year of construction: 2007, condition: excellent (used), machine/vehicle number: 926-0167-02, The ScanWorks V5 provides the largest field of view available in a line scanner with state of the art scanning. The ScanWork portable scanning system combines the ease-of-use of portable CMM arms with the sophistication of Perceptron's scanning technology. Djdpfxefy Nzbe Af Iocn The V5 is capable of scanning 458,400 points per second with a minimum point-topoint resolution of 12 microns. Additional features of the V5 include: Large field of view - 140 mm and 110 mm Projected rangefinder - projects accurate trapezoidal representation of field of view and optimal scanning offset distance - enabling users to become familiar with good scanning procedure. Dynamic range - captures accurate data on dark and reflective surfaces, negating the need for white powder sprays. Sensor is impervious to ambient light. This lightweight scanner (.75 lb) can rapidly capture large, geometrically complex areas with direct integration into your configuration of PolyWorks. Benefits of SharkScan non-contact laser scanning: Non-contact laser scanning avoids marring of sensitive surfaces or deflection of thin or soft materials. Real-time inspection allows rapid identification of errors, allowing for quick correction.Ideal for generating point clouds for reverse engineering (via PolyWorks Modeler).

Condition: used, Year of construction: 2013, Transnorm Belt Conveyor 1000-600-500 RA1281 The Transnorm belt conveyor is from 2013 and is in a new (used) condition. It is perfectly suited as a feeding belt and has a reflective light barrier with double lens (SICK WL100 P4430) to control the flow of goods. It has an engine of the brand SEW and MOVIMOT converter to control the speed. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Transnorm Type: B11 Built: 2013 Condition: as good as new (exhibition machine) Dodpjk Aa Rvofx Af Iscn Engine: fully functional Conveyor length (FL): 1000 mm Nominal/outer width (NB):600 mm Usable width (NUB): 540 mm Belt width (GB): 500 mm Engine Type: SEW Gear Motor + MOVIMOT Inverter Motor Power: kW 0.75/S1 Hz 50 A 1.90 Conveyor speed: adjustable from 2 to 90 m/min Drive: Head drive Weight: 80 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: good (used), OLYMPIA 3-Roll Feeder Dsdpfx Afoxb Dzre Iocn Specification: • Condition – used • Manufacturer – OLYMPIA • 3 drive rollers, dimensions 120x48 mm • forward/reverse rotation • working speed adjustable via switch and gears • motor powered by 380V (3-phase) current • 4 operating speeds, from 3.0 to 23.0 m/min • weight approx. 70 kg Additional information: • good technical condition • photos shown reflect the actual condition of the item for sale • possibility to switch on and test the device on site

Condition: used, The Josef Foellmer Iram 16, serial number 2037, is a robust four-head paper drilling machine designed for precision and efficiency in professional finishing environments. Currently located in a printshop in Germany, the unit is in good condition without any damage, reflecting its durability and careful maintenance. With its four drilling heads, the Iram 16 offers flexibility for a variety of drilling patterns and applications, making it a reliable solution for bindery and finishing operations that require accuracy, consistency, and productivity. Equipment: Good condition without any damage 4 head paper drills Dedpfx Asxb Dpijf Iocn

Year of construction: 2018, condition: ready for operation (used), Two identical Satisloh vacuum-based coating systems for eyeglass lens coating are available. Coating capacity with 70mm rimless full calottes: 209 lenses/batch, coating types: anti-reflective/mirror coatings/topcoats/special coatings/tinting. Machine dimensions X/Y/Z: approx. 2200mm/3150mm/2450mm, weight: approx. 3700kg. Documentation available. An on-site inspection is possible. Dodpfoxbrw Isx Af Ijcn

Condition: refurbished (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 50 kg, warranty duration: 12 months, total height: 1,950 mm, type of input current: AC, total width: 1,900 mm, total length: 2,020 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 350 mm, overall weight: 5,800 kg, input voltage: 230 V, compressed air connection: 6 bar, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Reference Measuring Device Mahr OMS 1000 Multisensor The all-round measuring device for the broadest range of components or pallet measurements Factory-refurbished premium multisensor measuring center with warranty, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or freight forwarding, worldwide. Online or on-site demonstrations with customer parts available, application-specific consultation by accredited Profitech metrology laboratories during project planning. Dcedexbpgtopfx Af Ijn Full service possible: – Delivery, installation, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Customized training and education programs also available as online courses. Rental, hire-purchase, or financing possible directly through Profitech and without a financial institution. Measuring device can be configured individually to customer requirements. Measurement accuracy: E1 = 1.3 + L / 400µm E2 = 0.9 + L / 600µm E3 = 2.2 + L / 300µm Measuring range: approx. 1000 x 1000 x 350 mm Includes optical sensor (camera & laser) Renishaw TP200 probe system incl. Standard Force Module CNC control incl. hand control panel 27-inch flatscreen monitor Evaluation station incl. Windows 10 operating system (Windows 11 available on request) New Opticheck 3D 5.0 software Active vibration damping (pneumatic) suitable for production-related measurements Optical sensor: • Pure grayscale image processing • Fast, digital image processor • Automatic feature and edge filter • Error documentation via program-controlled video image storage • Multifunctional multi-window technology • White telecentric transmitted light • Coaxial reflected light • 3D multi-sensor head Laser Sensor: Laser preparation for laser autofocus. Software-controlled intensity regulation for adaptation to different materials. Software: • Full version WITHOUT subscription model or maintenance contract • User-friendly, interactive programming • Symbolic representation of the program structure • Multitasking enables parallel measuring and evaluation • Powerful basic editor for customer-specific programs • Automatic sensor calibration • Geometry elements: point, line, circle (envelope, best-fit and circumscribed circle), ellipse, plane, cylinder, cone, sphere • Geometry functions: intersection, distance, angle, perpendicular, symmetry • Form & position tolerances: straightness, roundness, flatness, cylindricity, parallelism, perpendicularity, inclination, position, symmetry, concentricity, run-out, total run-out, flatness run-out, total flatness run-out • Maximum material condition (MMC) • Up-to-date tolerance tables according to common DIN standards • Software module for creating any factory-specific tolerance tables

Condition: used, overall weight: 35,000 kg, maximum load weight: 27,180 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,350 mm, loading space height: 2,300 mm, loading space volume: 55 m³, first registration: 04/2020, Year of construction: 2020, Equipment: ABS, Air suspension, lift, Jost plate, support legs, PVC half-shell mudguards, 3x WZK, double-sided AFS, access ladder, foldable aluminium underrun protection, reflective sign, cargo area lighting, loading pressure gauge, 5 mm floor, vibrator with oiler, 4 mm front wall, 3.2 mm side walls, rear wall made of 40 mm aluminium-wood profiles, rear wall single-wing mud-tight design with hydraulic locking, walkway with ladder, PVC rolling tarp with central locking, A-sign. Dcsdpfx Afowz Aw Ie Ion

Condition: used, Year of construction: 1973, The Hohner Favorit, manufactured in 1973 with serial number 1248, is a classic stitching machine built for durability and reliable performance. With a stitching capacity of up to 25 mm, it remains a practical solution for a wide range of binding applications. Currently located in Germany, the machine is in good condition without any damage, reflecting its robust construction and careful maintenance over the years. Djdpfx Asxb Dpcjf Iocn Renowned for its solid engineering, the Hohner Favorit continues to be a dependable choice for printshops and finishing operations seeking a straightforward, long-lasting stitching solution. Format: 25 mm Equipment: Good condition without any damage

Condition: used, overall weight: 36,000 kg, maximum load weight: 27,780 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,280 mm, loading space height: 2,400 mm, loading space volume: 60 m³, first registration: 06/2022, Year of construction: 2022, Equipment: ABS, Air suspension, lift axle, SAF disc brakes, EBS, aluminium drop-down supports, PVC half-shell mudguards, 2x WZK, double-sided underrun protection, access ladder, foldable steel underrun guard, reflective board, aluminium rims, loading pressure gauge, 5 mm floor, 3.2 mm front wall, 4/3 mm side walls, 3 mm rear wall with double-leaf door (1/2-1/2), slider, cover plate, catwalk with ladder, PVC rolling tarp with central locking, tarp protection, A-sign. Djdpjwx T Niofx Af Ijcn An identical vehicle is also available.

Condition: used, The GMP PROTOPIC II - 540 Laminator, serial number XK54S30033, is a professional laminating system designed for high-quality finishing applications. With a working width of 540 mm, it accommodates paper sizes up to 540 x 800 mm and as small as 210 x 200 mm, making it versatile for a wide range of production needs. Suitable for paper thicknesses from 120 to 350 g/qm2, the machine ensures consistent lamination results across different substrates. Currently located in a printshop in Germany, the unit is in good condition without any damage, reflecting careful use and maintenance. Compact, reliable, and efficient, the GMP PROTOPIC II - 540 Laminator is a practical solution for professional print finishing environments requiring durable and precise lamination. Format: 540 mm Equipment: Good condition without any damage Maximum paper size 540 x 800 mm Minimum paper format 210 x 200 mm Djdpsxb Dn Sefx Af Iocn Paper thicknesses from 120 to 350 g/qm2