Used Recycling Line for sale (11,704)

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Lrodpfjviwdmox Ad Nog Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, Rondo Doge Bread & Pastry Line. Year of production 2006. Total length 16.7m (Machine 11.55m + tables 5.15m) Width 1.80m (working width 0.7m) Height to hopper 3m. Total height 4.05m Efficiency: 600kg per hour - from 2500 pcs to 7500 pcs of products per hour for square, triangular and flat products Ability to produce a very thin continuous line of dough - from 1 mm to 24.5 mm. - Dough portioning hopper - 3 sprinklers - 2-roll dough extruder - calibrator - satellite sheeter - flour sprinkler - cross roller - longitudinal plate assembly - dough folders Lrjdpfx Adswn Hhqo Nsg - pneumatic guillotine Machine connected to the power supply and ready to work.

Year of construction: 2026, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: Lredpochb Sbsfx Ad Nsg 450mm, 600mm, 900mm.

Condition: new, Year of construction: 2025, working width: 1,300 mm, bending angle (max.): 135 °, sheet thickness aluminum (max.): 1 mm, total width: 1,900 mm, total height: 1,900 mm, warranty duration: 12 months, insertion depth: 1,250 mm, opening width: 105 mm, Equipment: documentation/manual, DINAMIC LINE Ltd. has been manufacturing machinery since 1994. All machines are certified, CE marked, and accompanied by a Declaration of Conformity. Our products are exported across the globe: Italy, Austria, Germany, Switzerland, Spain, Belgium, Turkey, Slovenia, Croatia, Bulgaria, Romania, Moldova, Hungary, Slovakia, Lithuania, Albania, Poland, Bosnia, Montenegro, Kosovo, North Macedonia, Australia, New Zealand, North America, Africa, Russia, Thailand, Malaysia, Tasmania, etc. By agreement with the customer, delivery can be organized under CPT (Carriage Paid To) terms to the customer’s premises. Ledpfx Ajgmhxajd Nsrg Assembly is not required - ready to use immediately. Quick delivery time Specifications: Working length: From 2 meters to 9 meters Working width: 1300mm Space requirements: 8800 x 1900 x 1800 Metal sheet bending thickness: 0.8mm / Al - 1.00mm Bending angle: 135° Machine weight: 3500kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 15mm or 20mm Foot switches: for 2 operator Characteristics: Ultra-fast Hyper production Hydraulic tightening and bending Electric cutting device Precise servo drive adding device Semi or automatic working mode Multi security system Automatic work by 1000 programs & subprogram Automation by PLC HMI Touch screen Friendly interface - incremental programming Remote programming & control Real time simulation & diagnostic LAN & Wi Fi communication Offset angle adjustment CHRISTMAS DISCOUNT

Condition: used, Year of construction: 2003, functionality: fully functional, rotor length: 1,100 mm, For sale P.R.T. shredder used for pre-shredding polyethylene. Italian manufacturer. In good condition. Without standing knives. With hydro drive and with electric control cabinet and stand. Lredox Rqacspfx Ad Nsg Shredder dimension LxWxH 2550 x 1200 x 2460 mm Stand dimension LxWxH 2450 x 1680 x 2700 mm Drive dimension LxWxH 1600 x 1200 x 1300 mm Rotor dimension LxW 1100x700 mm Please check our other machines for sale. (Extruder, grinder, chiller, washing line...)

Condition: used, Year of construction: 2003, functionality: fully functional, rotor length: 990 mm, rotor width: 650 mm, power: 110 kW (149.56 HP), For sale P.R.T. (Italian) Water Grinder used for shredding polyethylene film. 5x2 rotating knife 2x2 stationary knife. In good condition. With 110 Kw electric motor. Throughput 400-600 kg/h Rotor dimension W 650 x L 990 mm Lrsdpsx Rp S Refx Ad Nsg Please check our other machines (extruder, chiller, shredder...)

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, overall weight: 720 kg, total length: 320 mm, cutting length (max.): 300 mm, Alligator shears JMC 320 Fully overhauled, as new IMMEDIATELY available from stock IUT Beyeler AG, DE-06188 Landsberg. Financing and rental possible. We are looking for used alligator clippers! 12-month warranty The well established 320 Shear is a must for any yard and is now recognised as the industry standard for all shears of this type. One of our most popular shears, the McIntyre 320 Shear has maintained dominance in a demanding market due to its strength, quality and reliability The 320 is powerful enough to deal with a wide range of cutting and cleaning operations and is able to handle; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and of course all the usual non ferrous metal separations. The 320 can also be used to cut ferrous metals. Every shear comes with 1 year guarantee, spare parts can be delivered within 24 hours to whole europe. Lrsdpofxvklsfx Ad Nog

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product Lsdpfxstzmifj Ad Norg -inspection table -all working platforms -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Ljdpjrrglysfx Ad Nsrg Capacity 2700- 4500 kg /h of peeled onion

Condition: used, Year of construction: 2017, NP 683 | USED KHS CAN FILLING LINE 25,000 CPH Capacity: 25,000 cans per hour Products: Beer and carbonated soft drinks Can format: 500 ml; 211/202 Year of manufacture: 2012, 2017 Current condition: Still installed – machine powered. Can be inspected in dry cycle. Available for dismantling: November 2025 Packaging: Cans will be packed in trays with shrink film. Line components: - Bulk can depalletizer: Linker DPG-500, year: 2012 - Can inspector: Transtech Hysek, year: 2012 - Can conveyor: Linker Conveyor RC/KHS, year: 2012 Lrodoxd Ap Hepfx Ad Njg - Rinser: Linker Triplex Rinser TR/KHS, year: 2012 - Flash pasteurizer: KHS Innopro 140/14/85, year: 2012 - Filler: KHS Innofill Can DVD, year: 2017 - Seamer: Ferrum F08, year: 2012 - Lid feeder: NSM Lidserver A30, year: 2017 - Conveyor: KHS Innoline BTR, year: 2012 - Fill height inspector: KHS Innocheck CUB, year: 2012 - Blower: Europool - Tray packer: KHS Kisters SP0502, year: 2012 - Tray pack conveyor: KHS Innoline GTR, year: 2012 - Handle applicator: KHS CSM 050-2, year: 2012 - Packing machine: KHS Innopack 035 B2+FS A-L, year: 2012/2017 - Palletizer: KHS Innopal PBL1N1, year: 2012 - Pallet stretch wrapper: SIAT MFP, year: 2017 - Pallet conveyor: KHS Innoline PTR

Condition: used, Year of construction: 2013, Bottling Filling Line for Oil PET Year: 1995 | 2013 Speed: 6,000 bph on 1 L Cap: 29/21 mm Preform feeder Compressor for chiller moulds MTA Ljdpfjq Ttuqox Ad Nsrg Nr.1 Blower Kosme KSB 3000 Nr.2 Blower Kosme KSB 3000 Air conveyors Kosme Filling/capping monoblock ICS – 6,000 L/h Labeller ICS cold glue Shrink wrapper SMIPACK Shrink pallet wrapper Zlatorog KAESER high-pressure compressor Code: NP 537

Condition: like new (used), Year of construction: 2004, functionality: fully functional, COMPLETE ASEPTIC TETRA PAK TBA LINE Year: 2004 Output speed: 8,000 packs/hour Lredpfx Adjv Ay Uue Nsg Filling machine: Tetra Pak model TBA/21 TPA 500 SO Packaging type: Tetra Brik Aseptic (TBA) Format: 500 ml Prisma Speed: up to 8,000 packs/hour Aseptic filling technology: Hydrogen peroxide sterilization Packaging material feed: Roll-fed carton Touchscreen operator panel Cap applicator: Tetra Pak model TETRA PAK APPLICATOR 45 Cap type: TwistCap or LightCap Cap application: Fully automated Hot melt glue system: Nordson Problue 4 Cap elevator: Tecno Vibrazioni Packing unit: Tetra Pak model TETRA CARDBOARD PACKER 70 Secondary packaging: Tray or box packing Hot melt glue system: Nordson Problue 10 Inkjet coder: Videojet Coding type: Expiry dates, lot numbers Conveyor system: Total length approx. 65 meters

Condition: excellent (used), Used Bottling Line | used Beverage Line | soft Drinks NP 643 | PET LINE FOR JUICES Speed: 9,000 Bph composition: Bottle elevator Lrjdpouhzlaofx Ad Neg Bottle unscrambler Rinser Year 2011 Number of grippers 50 Type of double treatment Type of fixed nozzle Monoblock 30-valve filling machine 10-head capper Caps elevator HEUFT bottle inspector X-ray for bottle bottom inspection Tapes Bundler Year: 2011 Film-throwing type Available sizes: 250 ml, 330 ml, 500 ml and 750 ml User manuals and wiring diagrams present

Condition: used, Year of construction: 2011, functionality: fully functional, COMPLETE BOTTLING LINE Product: Beer, water, and lemonade Output: 6,000 bph Rotation: Clockwise Depalletizer: Flema Star C-CL Year: 1996 Capacity: 500 cph Operating mode: Pneumatic, gripper with hooks Decrater: RICO UNO Year: 2010 Capacity: 350 cph Number of heads: 1 Number of pick-ups per head: 20 Interchangeable heads: - 1 head for NRW 0.5 l bottle - 1 head for 0.33 l Ale bottle - 1 head for NRW 0.5 l screw-cap bottle Decapper: ADELSKI Year: 1995 Capacity: 12,500 bph Cap type: Crown cork Washer-Dryer: Macero PAC CB 14-0.5l-R-7 LII Compact Year: 1998 Capacity: 7,500 bph Construction: Fully stainless steel Includes steam heat exchanger Bottle Inspector: SYSCONA Alkali LC 10 FD + Metal Detection Year: 2007 Capacity: 15,000 bph Ledpfx Aox Ngqbjd Norg Monoblock: ICS-ARKOR Model: multiFILL-VK 24/6CR/6RA Year: 2011 Capacity: 6,000 bph Rotation: Counterclockwise Filler: 24 valves Filling system: Isobaric 2 Cappers: - Crown cork, 6 heads (pick-on-the-fly) - Aluminium screw cap, 6 heads (pick-on-the-fly) Labeler: ANKER Model: 1191/99/420R Year: 1999 Output: 7,000 bph Type: Rotary Rotation: Counterclockwise Number of plates: 8 Number of stations: 2 Labeling method: Cold glue Applicable labels: • Front • Back • Neck Case Packer: RICO Model: UNO 1-Head L-Machine Year: 2012 Capacity: 300 cph Number of heads: 1 Number of pick-ups per head: 20 Head type: Fixed Palletizer: Flema Model: Star C-LC Year: 1996 Capacity: 500 cph Product handled: Crates Head type: Magnetic Case Washer: RICO 2500 1-Bad Year: 2012 Capacity: 600 cph 2 CIP tanks of 600 liters each Year of manufacture: 2012 Steam heated for filler CIP, with plate heat exchanger Safety features included Code: NP 688

Condition: used, Year of construction: 2010, functionality: fully functional, NP 687 | COMPLETE PET BOTTLING LINE SIDEL FOR CARBONATED DRINKS Product: Carbonated water and soft drinks Production speed: 13,500 bottles per hour (BPH) PET Preform Presses – Sameto - Model: EBH 2050 - Year: 2010 PET Blower – Sidel - Model: SBO10 - Year: 2010 - Neck finish: ø28 1881 - Number of cavities: 10 Lrsdpfx Asxz Aytod Neg Air Conveyor – Alsim - Year: 1999 Monoblock – Alsim - Model: Asmojet 1T RV-P 48/60/10K - Year: 1999 - Rinser: 48 clamps, 1 water treatment - Filler: 60 isobaric valves - Capper: 10 heads Mixer – Alsim - Year: 1999 - Output: 30 m³/h Bottle Dryer – ACI - Year: 2015 Labeler – Krones Contiroll - Model: Contiroll - Year: 2004 - Type: Rotary labeler - Number of stations: 15 - Label type: PET wrap-around - Label feed: Roll-fed Shrink Wrapper – Acmi - Model: Fenix - Year: 2019 - Configuration: Film launching, film only Handle Applicator – Smipack - Model: HA 35-50-70 - Year: 2002 Palletizer – Alsim - Model: Valiant 1I 1P - Year: 1996 - Fully automatic, push-type system Pallet Wrapper – PM Pragometal - Model: OBS Rotomatic Standard - Year: 2009

Condition: like new (used), Used Filling Line NP 657 | COMPLETE PET AXETIC BOTTLING LINE Year: 2011 Speed: 500 ml 30,000 bottles/hour 1000 ml 24,000 bottles/hour 1500 ml 18,500 bottles/hour Production: fruit juices and tea Filling method: aseptic, volumetric Filling temperature: 18-24°C Sizes: 500 ml, 1000 ml and 1500 ml Bottle type: PET bottles Stopper for bottle Standard 28 mm Product: still only Sterilization type: aseptic sterilization PET Blow Molding Machine Krones Contiform Series 3 Krones Aseptic Filling Monoblock Steriljet sterilizer Variojet Rinser Filling machine Capper Aseptic Ventilation Isolator VARIO DOS LIQUID ASEPTIC Hygiene Center Sterile Water Treatment AQUA ASEPT Bottle Coding Matrix Laser DDC3 Lrsdpeuyhdvefx Ad Nsg Checkmat FM-X+L fill level sensor PCS process control system KZE product treatment (plate), sterile tank, rework container CIP-System cleaning system Condensate lifting system Krones Contiroll labeler Krones Variopac shrink wrapper Twin Pack handle applicator Krones Robobox Palletizer SYNCO Bottle Conveyor Belts

Condition: used, Safe Line metal detector Equipped with stainless steel reject flap Fully stainless steel and easy to clean by means of hatches Metal detection diameter: 200 mm Total installation height: 1200 mm Lrsdpfx Adox Nzzzs Nsg See our other listings VMA Wekerom

Condition: excellent (used), Year of construction: 2010, operating hours: 2,125 h, functionality: fully functional, MG Recycling – Copper Cable Granulation Line Manufacturer: MG Recycling Model: Matrix 400 Complete Cable Granulation Line Condition: Excellent – Fully operational Availability: Immediate Technical Description: Cable granulation line including: • Fully rebuilt pre-shredder (recent overhaul) o All rotor bearings replaced o Gearbox bearings replaced • Conveyor with magnetic rollers for scrap separation • Dosing hopper • Feed conveyor • Blade mill with 3 / 4 / 5 mm calibration screens • Separation by cyclone and zig-zag separator • Finishing turbo • Densimetric table • Dust extraction with bag filter Spare parts included: • Pre-shredder: 1 set of knives + counter-knives • Blade mill: 3 sets of blades and counter-blades Capacity: ≈ 200 kg/h finished product Lredpfx Adex It N Us Nsg Application: Copper cable processing and recycling Price: €120,000 (complete processing line) Additional information: • Installation can be seen in operation • Photos and further details available on request 📩 Contact us for more information

Condition: excellent (used), Year of construction: 2018, Upgraded Stork / Marel AMF Filleting Line – AMF-i Version We are pleased to offer for sale an upgraded Stork/Marel AMF filleting line, rebuilt from AMF PLC to AMF-i version. The line is in very good technical condition, equipped with its original electric cabinet, and ready to operate in a modern poultry processing plant. The line consists of the following modules: -Filleting line with measuring equipment (encoder) -Loading Module -Deskinner Module -WB without rebuild (no size selection) -Halving with auto adjust Lrsdpfx Adsx Hymds Njg -Separating Module -Breast Tendon Harvesting Max speed: 60 fillets/min Year of production: 2018 Condition: Very good

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 27042010, TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair of asphalt concrete surfaces. A portable asphalt recycling plant / recycler RA-800 from TICAB with its own engine and hydraulic drive produces 800 kg of high-quality asphalt mixture for every 20-30 minutes from asphalt scrap, milling, bitumen, crushed stone, sand. It also allows you to warm up the material and work with it within the area of laying or replacing asphalt. Equipment is ideal for emergency road repairs. Technical Specifications: ● Diesel engine with electric starter (10hp). ● Recycler productivity - 1800 - 2500 kg/hour. ● Drum capacity 800 kg (0,6 m3). ● Product heating temperature - 120 – 160 °C. Lredpfx Adevrw Ans Nog ● Product heating time up to 15-20m (160°C). ● Fuel tank for 100 l (equipped with a fuel level indicator). ● Power of burner 100-130 KW. ● Burner diesel powered by a generator with a voltage stabilization system. ● The recycler drum is equipped with a heating distribution system (on the whole surface). ● Side flaps construction provides light access to servicing drum rollers. ● Control panel with indicators and at least one 220V power outlet on this panel (can be used for charging tools or lighting). ● Control panel, power block equipped with locks protection

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Diameter range: 50 - 160 mm Height range: 65 - 300 mm Production capacity: up to 70 c.p.m. Ljdpfxstqmwge Ad Nerg Tooling for approx.: 160 x 90 mm Lubeca LW792 can filler Lubeca LW303 can seamer

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Line was implemented & wasnt used for serial production yet except FOT production. Quite new. It contains below processes : Robotics ArcWelding Cell With 3 Axis Turn Table x 2 Qty 2S-1100 Robotics ArcWelding Cell X 1 Qty Knuckle Bracket and Spring Seat Fixture x 4 Qty Stab Bracket Fixture X 2 Qty Lsdpfxew Uppps Ad Njrg Knuckle Bracket Projection Welding System X 1 Qty Automatic Base Cap and Knuckle Bracket Assembly System X 1 Qty Drilling And Press Machine with Industrial Robot X 1 Qty Leakage Test System X 1 Qty Marking System X 1 Qty

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 500 h, Bunker dosing belt by R&T Recycling Technik Year of manufacture: 2016 Capacity: 2.5 m³ Drive: 1.5 kW Frequency-controlled feed belt Lrodpsxcuvijfx Ad Nog This system was integrated into a small pilot plant for approximately 3 months in 2016. The unit is in excellent condition and ready for operation. As shown in photo no. ..., this unit can be transported on a large tandem car trailer.

Condition: new, functionality: fully functional, Year of construction: 2025, 🚧 50-600 T/H Sand & Gravel Production Line – Transforming Raw Materials into High-Quality Aggregates! 🚧 🌟 General Introduction Looking for a reliable and efficient solution for your sand and gravel production needs? Our 50-600 T/H Sand & Gravel Production Line is a high-performance system designed to meet the diverse requirements of construction, infrastructure, and industrial projects. Whether you need coarse aggregates or fine sand, this production line ensures precision, efficiency, and scalability. --- 🏗️ Wide Range of Applications Our sand and gravel production line is perfect for: - Construction Projects: Producing aggregates for concrete, asphalt, and roadbeds. - Mining Operations: Processing various ores and minerals. - Infrastructure Development: Creating high-quality materials for bridges, dams, and highways. - Commercial Sand Supply: Meeting market demand for sand and gravel in bulk. --- 💎 Key Advantages ### 1. High Capacity & Versatility - Produces 50-600 tons per hour, easily scaling to match project demands. - Handles a wide range of raw materials, including limestone, granite, basalt, and river stones. ### 2. Advanced Technology - Incorporates cutting-edge crushing, screening, and washing equipment for consistent quality. - Optimized for energy efficiency, reducing operational costs. ### 3. Customizable Solutions - Configurable to meet your specific requirements, from particle size to layout design. - Offers flexibility in combining different crushers (jaw, cone, impact) and vibrating screens. Lrodpfxjq Nywxs Ad Neg ### 4. Durable & Low Maintenance - Built with robust materials to withstand heavy-duty operations. - Easy-to-maintain design minimizes downtime and extends equipment lifespan. ### 5. Environmentally Friendly - Features dust suppression systems and water recycling units to reduce environmental impact. - Promotes sustainable practices in aggregate production. --- 🚜 Your Complete Solution Our production line includes: - Primary Crushing: Breaks down large rocks into manageable sizes. - Secondary Crushing: Refines materials to desired specifications. - Screening Equipment: Ensures uniform sizing and quality control. - Washing System: Removes impurities for cleaner, higher-grade aggregates.

Condition: new, Year of construction: 2025, A stone crushing plant for sand and aggregate making is a facility where stones and rocks are crushed into smaller pieces or gravel. It typically includes several stages of crushing and screening to produce various sizes and grades of sand and aggregate materials, which are essential in construction, landscaping, and other applications. Here's an introduction to the components and processes involved in a typical stone crushing plant: ### Components of a Stone Crushing Plant 1. Primary Crusher: - Purpose: The primary crusher, often a jaw crusher or gyratory crusher, initially breaks down large rocks into smaller pieces. - Function: It handles raw materials from the quarry or mine and prepares them for further processing. 2. Secondary Crusher: - Purpose: A secondary crusher, such as a cone crusher or impact crusher, further reduces the size of the crushed stones. - Function: It refines the material after primary crushing, producing smaller and more uniform-sized aggregates. 3. Tertiary Crusher (Optional): - Purpose: In some configurations, a tertiary crusher like a vertical shaft impactor (VSI) may be used for shaping and fine crushing. - Function: It produces finely crushed materials for specific applications, such as concrete production or road base. 4. Screening Equipment: - Purpose: Screening equipment like vibrating screens or trommel screens separates the crushed materials into different sizes. - Function: It classifies the aggregates into various grades according to size, ensuring uniformity and meeting specifications. 5. Conveyor Systems: - Purpose: Conveyor belts transport materials between different stages of crushing and screening. - Function: They ensure efficient material handling and continuous operation within the plant. 6. Washing Equipment (Optional): - Purpose: Washing equipment, such as sand washers or scrubbers, may be used to remove impurities from sand and aggregate products. - Function: It improves the quality of the final products by cleaning them and removing fines or contaminants. Ledpfoq N U Duox Ad Nsrg ### Processes Involved - Primary Crushing: Large rocks are fed into the primary crusher and reduced to a manageable size. - Secondary Crushing: The crushed materials from the primary crusher are further processed by secondary crushers to achieve the desired aggregate sizes. - Screening: The crushed and sized materials are screened to separate them into different sizes and grades. - Material Handling: Conveyor systems transport materials between different stages of the crushing and screening process. Final Product Handling:Finished products, such as sand and various sizes of aggregates, are stored or loaded for transport to customers or construction sites. Applications - Construction: Used in the production of concrete, asphalt, and road base materials. - Landscaping: Provides decorative and functional aggregates for gardens, pathways, and driveways. infrastructure: Essential for building foundations, drainage systems, and structural fill. As for the capacity we have 30 t/h, 30-50 t/h, 50-100 t/h, 100-150 t/h, 150-200 t/h, 200-300 t/h, 300-500 t/h, and both stationary crushing plant and mobile crushing plant are available for option.