Used Rectifier for sale (133)

Condition: used, Year of construction: 2017, functionality: fully functional, plating electronics GmbH Rectifier water-cooled Lhodexlqy Nopfx Ab Ujn

Condition: ready for operation (used), welding circuit at 60% ED: 310 A welding circuit at 100% ED: 235 A electrical connection: 400 V Ledpfod R S Dfex Ab Uehn space needed: 1000 x 750 x 630 mm

Year of construction: 1980, condition: good (used), Device number: 2 002 Welding current at 100 % ED: 80 Amp Connection: 18 kVA Lhedpfx Abohk El To Uon Cooling type: forced cooling Equipment: hose package for connection; burning device; mobile Dimensions: 1.000 x 700 x 1.000 mm Weight: 0,3 t

Condition: used, DC main spindle drive, converter unit with digital control Simoreg V55 Spindle module, drive controller, rectifier, DC controller Manufacturer: SIEMENS Type: SIMODRIVE 6RA2725-6DV55-0 D380/60 Mreq-GdG6V55-3A0 Version: V55 basic unit Input voltage: 3 AC 380 V Input frequency: 50 / 60 Hz Input current: 49 A Output voltage: 380 VDC Output current: 60 A Rated power: 22 kW Ledsh D Syrjpfx Ab Ujhn Dimensions (W x H x D): 270 x 260 x 290 mm Weight: approx. 25 kg The drive controller is still operational in a Gildemeister GDM42. The matching drive motor can be found under stock number 60347. Further components from the Gildemeister can be found under stock numbers: 60346, 60347, 60348

Condition: good (used), Manufacturer: Norelco Tip: NACBL 300 Lhjdpfx Aboc Ut Itj Uen

Year of construction: 1974, condition: used, Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier -Welding performance: max. 400 A -Welding cable with electrode clamp -Ground cable Lhedjb A I Sujpfx Ab Usn -Weight: 340 kg

Condition: used, Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier Lhedpfx Ajb T Ti Ieb Ujn -Welding performance: max. 220 A -Dimensions: 1200/700/H720 mm -Weight: 280 kg

Condition: used, Technical details: capacity at 100% ED: 400 A capacity: 60% ED = 500 A welding current: Gleichstrom V weight of the machine approx.: 230 kg capacity: 21 kVA Lhodpfx Abeu Nwc Hs Ujn Welding rectifier MIG / MAG Cooling type F Protection class IP 23 insulation class F incl. wire feed device, feed rate 0,5 - 20 m/min Ground cable/pliers Hose package 4 meters new *

Condition: ready for operation (used), Baumüller BUG2-60-30-B-003 built-in rectifier SN:993305921, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Lhodpfji D T Hmsx Ab Uon

Condition: ready for operation (used), IFE Electro Magnetic Conveyor Belt Brand: IFE Ledpfew Tr Rtsx Ab Ujhn Length frame A-A = 2200 mm Beltwidth: 800 mm Driving: 3 kW e-motor Dim. Block : 900 x 900 x 600mm Including rectifier.

Condition: used, Year of construction: 2019, Edge Control Numerical Control Panel height min - max mm 6 - 60 Pvc/Abs up to mm 3 Minimum panel length \ width mm 140 \ 60 Feed speed up to mt/min 10 / 25 continuously Working height electronically adjustable by C.N Lateral roller conveyor with idle wheels for panel support Rectifier unit with 2 motors Coil holder plate Gluing unit for EVA \ PUR glue with cartridge or granular system Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C Trimming unit with 2 motors Gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 multifunction motors (edger + rounder) with regulation by numerical control in automatic Edge scraping unit with electronic regulation from N.C. Glue scraper group Brush group Machine length mm 6500 approx Weight Kg 2750 approx Lhjdpfx Abowwhn Do Uen

Condition: used, Technical details: cutting thickness max.: 0,5 - 70 mm infeed - automatically: 40 mm control: CNC 2050 table-size: 2x L:1500 x B: 1700 x H: 720 mm burner heads: 2 Stück weight of the machine ca.: 6,7 t Autogenous flame cutting machine with table. With corresponding additional equipment, the following processes can be performed: Plasma cutting; Plasma signing; Marking; Graining; Boring. other specifications: 2x tables: -L:1500 x W: 1700 x H: 720mm, supporting surface L: 1500 x W: 1500mm; with suction connection Ø 320 x 60mm Distance control system: -Make ZAC 2100, type 7211-2-100 V02; -size 105 x 165 x 130mm -24 VDC; torch voltage 30 - 300V; protection class IP50 -ignition height 1 - 25mm in steps of 0,2mm -cutting height 1 - 12,5mm in steps of 0,25mm -Cutting height together 0 - 20mm in steps of 0,5mm Lhedeu Nwfuepfx Ab Uon Height drive: - Linear Drive model, type 2203; 24 VDC 100 - 190 watts; stroke 220mm. Laser generator: -manufacturer Kijellberg, type HiFocus 280i, welding rectifier -Power range 10A / 84V - 280A / 192V; protection voltage IP22; cooling type AF; with 2x cooling connection 1/2". Heat exchanger: -manufacturer Kijellberg, type KWE 360 -working voltage U1 400V / 2,5A; protection type IP22; coolant of Kijellberg mixture; with 2x cooling connection 1/2". *

Condition: ready for operation (used), WOKO Electro Magnetic Conveyor Belt Brand: WOKO Length frame A-A = 2600 mm Beltwidth: 1400 mm Driving: 4 kW e-motor. Lsdpfx Absxdvw De Uohn Dim. block : 2100 x 1400 x 430 mm Including rectifier.

Condition: used, Technical details: Length: 1000 mm width: 300 mm voltage: 110 V clamping surface area: 1000 x 300 mm current: 2,9 A weight of the machine approx.: 204 kg dimensions L x W x H: 1,2 x 0,3 x plus Gleichrichter m Magnetic plate with rectifier 4pcs induction loops with width 60mm and distance 75mm Lodpfou N Dy Sjx Ab Uehn *

Condition: used, Year of construction: 2002, Technical details: x-travel: 1500 mm z-travel: 1300 mm control: YASNAC XRC Steuerung total power requirement: 3,3 kVA Total weight, approx.: 3.200 kg Welding robot plant consists of: -welding rectifier MESSER, type Phoenix 500TG; MIG-MAG / TIG and E-welding up to 500A; air cooling; protection class IP 23 -Wire feed EWM, type Phoenix Drive 4 ROB WE, wire Ø 1,0 - 1,2mm, feed 0,5 - 24 m/min., protection IP 23 -MIG/MAG gas shielded welding torch BINZEL for wire Ø 0,8 - 1,6mm Lhsdou R Dfkepfx Ab Ujn -Robot ERCS UP6-RE00 with control YASNAC XRC control, travels Y-way=1.500mm and Z-way=1.300mm, circular movement swivel=approx. 90° right/left, swivel radius=1.000mm, turn 360°, welding gun rotate 360° with projection max/min: 1.500 / 500mm -1x control cabinet L:900 x W:900 x H:2500mm -1x control cabinet ERCS-UP6-RE00, control 4.0 XRC, L:610 x W:800 x H:900mm -1x welding table L:4.400 x W:550 x H:1.100mm, with compressed air connection 10 bar, working area LxW 1.200 x 340mm, X-way 3.250mm. furthermore: 1x straightening station DETEC manufacturing (with working table and straightening unit) 1x butt welding station with feeding table i.D. *

Condition: used, Technical details: power consumption: 350 A total power requirement: 17,5 kVA weight of the machine approx.: 64 kg Lhjdpou Nwd Defx Ab Usn dimensions of machine: 0,65 x 0,32 x 0,5 m Welding rectifier/inverter MIG/ MAG:40A / 14V up to 350A / 31,5 V TIG: 10A / 10V up to 350 A E-welding: 15A / 20,5V up to 350A / 34V Voltage U1: 380 - 415V Cooling type: F (water cooled) Protection class: IP 23 *

Condition: used, Technical details: power consumption: 240 A voltage: 3x400 V open-circuit voltage: 91 V power consumption: 9,3 kVA weight of the machine approx.: 28 kg dimensions of machine: 1,0 x 0,6 x 1,0 m Welding rectifier (inverter) TIG (steel/VA) and manual electric welding Direct current TIG = up to 240 A / 19.6 V Electric welding = up to 240 A / 19.6 V 2/4-cycle switchover, stepless switchover to pulse Protection class IP 23 Water-cooled and frost protection Shielding gas / solenoid valve Gas-cooled torch head with remote control for welding current Ljdpfeu U Iixsx Ab Uohn Equipment: Hose package 7.4 meters Ground clamp and ground cable 4.2 meters *

Condition: used, Year of construction: 2004, Technical details: table diameter: 400 mm table turning speeds: stufenlos U/min tilting range table plate: 90 ° voltage: 230 V / Hz V connected load: 11,8 kVA machine weight approx.: 220 + 173 kg POSITIONER - ROTARY TABLE with welding source Messer Griesheim Application: for circumferential seam welding Welding device: Welding rectifier Messer Griesheim Variomatic 40 for MIG-MAG, direct current; protection class IP 23; cooling type F with remote control Stepless current/drain feed, 4.0 meter hose package Torch head Ground clamp/ground cable Size: L: 1.1 x W: 0.5 x H: 1.3 Weight approx. 279kg Welding turntable MB Milano, TGA 75: swiveling welding turntable up to 90° allows horizontal and vertical welding (direction of rotation left and right) Infinitely variable speed; operation via control panel and/or foot control stands on transport trolley Size: L: 0.8 x W: 0.6 x H: 1.3 Weight approx. 173kg Lodou Nkxhjpfx Ab Uehn Wire feeder type Eurotrac SLV, feed rate 1.2 - 18 m/min *

Condition: used, Technical details: power consumption: 350 A total power requirement: 17,5 kVA weight of the machine approx.: 58 kg dimensions of machine: 0,6 x 0,35 x 0,5 m Welding rectifier/inverter with trolley MIG/ MAG:40A / 14V up to 350A / 31,5 V TIG: 10A / 10V up to 350 A E-welding: 15A / 20,5V up to 350A / 34V Voltage U1: 380 - 415V Lhodpfeu Nwdksx Ab Usn Cooling type: F (water cooled) Protection class: IP 23 Without hosepackage and welding gun! *

Condition: used, Year of construction: 2006, Technical details: power consumption: 30 / 15,5 350 / 31,5 A welding current: Gleichstrom V Lhjdpfou Nwgfex Ab Uen open-circuit voltage: 15,5 - 41,0 V total power requirement: 16 kVA kw weight of the machine approx.: 125 kg dimensions of machine: L: 1,05 x B: 0,5 x H: 0,70 m Compact welding machine - Welding rectifier with integrated wire feeder -MIG MAG -Connected load 9.7 kVA -2-stroke; 4-stroke; spot; interval -Cooling type AF -Protection class IP 23 -Insulation class H -Welding torch and earth cable *

Condition: used, Year of construction: 2010, Technical details: power consumption: 400 A output voltage: 10 - 60 V control voltage: 3x400V / 50Hz V/Hz capacity in kVA: 22 kVA compressed air: 10 bar weight of the machine approx.: 345 kg total power requirement: 12 kW dimensions of machine: 1,3x0,7x1,3 m UNIVERSAL ARC SPRAYING SYSTEM - ARC RECTIFIER max. spraying capacity: Zinc = approx. 40 kg/h AL = approx. 12 kg/h CrNi steel = 30 kg/h A/Bz9Mn = approx. 15 kg/h Pick-up unit for wire spools Air motor drive with handle OSU-LD/U-2 for wire Ø 1.6; Ø 2.0 or 2.5 mm removable control panel Siemens touch screen mobile/mobile Protection class IP 21 Mains fuse 32A * Ljdpfx Ajvtyyrob Ujhn

Condition: used, Technical details: welding current: WIG: 420 A welding current: E: 320 A open-circuit voltage: WIG: 59 V open-circuit voltage: E: 42 V weight of the machine approx.: 11,5 kg dimensions L x W x H: ca. 0,85 x 0,4 x 1,0 m Welding rectifier / inverter, on 4 wheels TIG / electric welding Direct current Lhodpfjv H Ayhox Ab Ujn TIG = up to 420 A E = 240 A Protection class IP 23 Air cooling *

Condition: used, Technical details: capacity at 100% ED: 400 A capacity: 60% ED = 500 A welding current: Gleichstrom V weight of the machine approx.: 230 kg dimensions of machine: 1,05 x 0,70 x 1,2 m capacity: 21 kVA Welding rectifier MIG / MAG Cooling type F Protection class IP 23 Isolation class F incl. wire feed device, feed rate 0,5 - 20 m/min Lhedpfx Aeu Nwctjb Uon *

Condition: used, Technical details: power consumption: 240 A voltage: 3x400 V Lhodpfx Aeu U Ihzeb Uen open-circuit voltage: 91 V power consumption: 9,3 kVA weight of the machine approx.: 28 kg dimensions of machine: 1,0 x 0,6 x 1,0 m Welding rectifier (inverter) TIG (steel/VA and electric welding hand Direct current TIG = up to 240 A / 19.6 V Electric welding = up to 240 A / 19.6 V 2/4-cycle switchover, stepless switchover to pulse Protection class IP 23 Water-cooled and frost protection Gas-cooled torch head with remote control for welding current Shielding gas / solenoid valve Equipment: Hose package 7.0 meters Ground clamp and ground cable 3.3 meters *

Condition: new, This is a new machine which is manufactured in Romania by the manufacturer Emsil. Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office. Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings. The machine is also equipped with a milling and boring bar which can handle exceptional power and torque. The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings. The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically Rotary Turntable: The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones. There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system. CNC Axes Control: The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc. The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc. You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm * Lodpfx Abeu Id H As Ushn