Used Lust for sale (21)

Condition: used, Synchronous servomotor with holding brake and gearbox, geared motor, electric motor, angular geared motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanently excited synchronous servo motor DC link voltage of the controller Uzk: 560 VDC Rated power: 14.51 kw Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Standstill torque M0: 83.4 Nm Rated current In: 31.5 A Standstill current I0 / I0max: 54.9 / 219.6 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length 50 mm - Shaft journal with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver 1-pole pair - Option KK Terminal box - Option T1 (DIN-PTC double base insulated) - Power connection 8-pin junction box - Resolver connection 12-pin junction box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order no.: 718690 Art. No: Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 65 Nm Angular gearbox WESTFALIA Systemtechnik Hollow shaft output: internal Ø 65 mm Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Speed gearbox input: max 4500 rpm. Transmission ratio: 10:1 - Shaft journals also ground on the outside Ncsdpfof Dlzuex Ad Nel - Gearbox can be mounted on two flange surfaces - Mounting hole on gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg good condition

Condition: used, Synchronous servo motor with holding brake and gear, Geared motor, electric motor, angular gear motor Engine: Manufacturer: LUST LTI DRIVES Type: LSK-190-4-30-560 T1,P,KK,1R Order no.: 716090 Art. No.: 0970.8015 Machine type: Permanently excited synchronous servo motor DC link voltage of the controller Uzk: 560 VDC Nominal power: 12,13 kw Nominal speed: 3000 rpm Nominal torque Mn: 38,6 Nm Standstill torque M0: 61.5 Nm Rated current In: 26.6 A Standstill current I0 / I0max: 41 / 164 A Pole pairs: 3 shaft diameter: 32 mm Wavelength 50 mm - Shaft journal with keyway and keyway DIN 6885 / A10x8x50 - Option 1R Resolver 1 pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection 8-pole junction box - Resolver connection 12-pole junction box Holding brake: Njdof Dlzqopfx Ad Njcl Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order no.: 717173 Art. No.: 228-00043 Nominal voltage: 24 VDC Rated current: 4.5 A Nominal power: 108 W Braking torque: 160 Nm Angular gearboxes WESTFALIA Systemtechnik Shaft journal output: Ø 60 mm with feather key Shaft journal Length: approx. 120 mm Gearbox output speed: max 450 rpm. Gearbox input speed: max 4500 rpm. Transmission ratio: 10:1 - Gearbox can be mounted on two flange surfaces - Mounting hole on gear unit 180 x 180 mm / 180 x 230 mm - Transmission with 3-fold sprocket outer diameter: 147 mm, number of teeth: 17 Overall dimensions L x W x H: 1020 x 250 x 350 mm total weight: 175 kg sound condition 2 pieces available, price per piece [...]

Condition: like new (used), For sale is a lot of high-quality aluminum industrial profiles with large cross-sections. The profiles are as new & unused, making them ideal for applications in mechanical and plant engineering, fixture construction, frame building, or hall construction. Technical data: Quantity: 30 pieces of 5.27 m each + 1 piece of 4.04 m Cross-section: 130 mm x 50 mm Total length: 161.14 m Material: aluminum extruded profiles Total weight: approx. 725 kg Profile type: T-slot profile / construction profile / industrial profile (solid, multi-chamber) Features: Highly stable and torsion-resistant Lightweight and easy to process Corrosion-resistant Ideal for load-bearing structures Condition: As new / unused Ncjdpfexbyx Hsx Ad Nel Minor storage marks possible Logistics: Goods bundled on pallets Collection by arrangement possible Shipping available on request for an additional charge

Condition: good (used), Year of construction: 2016, In this offer you will acquire a used server system "NetApp FAS8040" including 3 storage shelves in a good condition. Object of sale: 1 NetApp FAS8040 with the following equipment: - 64GB ECC memory - NetApp c-DOT 64bit operating system - Scalable up to 5760TB total capacity - Max. Aggregate size 324TB - SnapShot functionality - 2x power supply (redundant 1+1 each, hot-plug) - Fan (Redundant, Hot-plug) - Mounting rails for 19" rack - Expandable up to 720 hard disks Onboard: - 2x 1Gbit Service Processor (SP9 for management, Ethernet ports RJ45 - 2x 100Mbit private management ports RJ45 - 8x 10/100/1000 Mbit Ethernet ports - 8x 10Gbit Ethernet ports LC - 8x Unified Target Adapter (UTA2) 10Gbit Ethernet ports LC - 8x 6Gbit SAS ports QSFP - 8 PCIe expansion slots Software / Licenses c-DOT 9.X 2x DS4246 Shelf - 24 hard disk bays 3,5" - 20x 4TB NL-SAS hard disks, hot swap - 4x 400GB SSD hard disks, hot swap - Mounting rails for 19" cabinet - 2x IOM6 6GBit SAS module (redundant, hot swap) 1x DS2246 shelf - 24 hard disk bays 2,5" - 24x 1.2TB at 10k SAS hard disks, hot swap - 2x power supply, redundant - 2x IOM6 6GBit SAS Module (Redundant, Hot-swap) Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for function. Packing and shipping: You are welcome to look at the device during our business hours. Please make an appointment for this! A seaworthy packaging and worldwide shipping on request possible! Before shipping or pickup, a function test will be recorded on video for you. Nodpfeiindlox Ad Necl For more information, you can of course also contact us personally.

Condition: good (used), Year of construction: 2016, In this offer you will acquire a used server system "NetApp FAS8040" in a good condition. Item for sale: 1 NetApp FAS8040 with the following equipment: - 64GB ECC memory - NetApp c-DOT 64bit operating system Ncedpsiinawofx Ad Nol - Scalable up to 5760TB total capacity - Max. Aggregate size 324TB - SnapShot functionality - 2x power supply (redundant 1+1 each, hot-plug) - Fan (Redundant, Hot-plug) - Mounting rails for 19" rack - Expandable up to 720 hard disks Onboard: - 2x 1Gbit Service Processor (SP9 for management, Ethernet ports RJ45 - 2x 100Mbit private management ports RJ45 - 8x 10/100/1000 Mbit Ethernet ports - 8x 10Gbit Ethernet ports LC - 8x Unified Target Adapter (UTA2) 10Gbit Ethernet ports LC - 8x 6Gbit SAS ports QSFP - 8 PCIe expansion slots Software / Licenses c-DOT 9.X Condition: This is a used unit and may show signs of use (minor scratches or yellowing). The device has been tested for function. Packing and Shipping: You are welcome to look at the device during our business hours. Please make an appointment for this! A seaworthy packaging and worldwide shipping on request possible! Before shipping or pickup, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Blower for transporting goods from the dryer to the rebler, through the air separator and then onward to packaging. Blower with 7.5 + 11 kW with frequency inverter, additional blower with 7.5 kW optionally available. 3 rotary airlocks at 0.55 kW each. Steel frame for the rebler unit, disassembled for truck transport. Control cabinet for rebler and air separator system with 32 A input current. System has been dismantled. No in-house herb drying anymore. Nsdpfx Aowqfxysd Njcl - youtube short: Herb separation, cleaning, air separator for mint, sage, lemon balm.

Condition: new, functionality: fully functional, mileage: 754 km, power: 175 kW (237.93 HP), first registration: 01/2026, fuel type: diesel, empty load weight: 7,121 kg, maximum load weight: 4,869 kg, overall weight: 11,990 kg, tire size: 245/70 R 17,5, axle configuration: 4x2, wheelbase: 4,820 mm, next inspection (TÜV): 01/2027, fuel: diesel, fuel tank capacity: 280 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 44 m³, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 2,515 mm, Year of construction: 2023, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, onboard computer, parking heater, soot filter, spoiler, tail-lift, traction control, trailer coupling, Vehicle number #29060 NEW VEHICLE Year: 05/2023 754 km Euro VI FH-S (ClassicSpace) High Performance Engine Brake Wheelbase: 4,820 mm Rear axle air suspension Tyres: 245/70 R 17.5 Alloy wheels Krukenmeier body, internal dimensions: 7,200 x 2,480 x 2,515 mm Side through-loading: 2,450 mm MBB Palfinger tail lift 1,500 kg Curtainsider on both sides Tow bar with ball head 180 + 100 litre fuel tanks Differential lock Powershift 3 Air conditioning Auxiliary heater Cruise control Traction control Driver’s air-sprung seat, heated Multifunction steering wheel On-board computer Radio/USB/AUX Snooper navigation system Roof hatch Electric windows (dual) Electric and heated exterior mirrors Driver airbag Electronic Stability Program (ESP) Active Brake Assist Lane Keeping Assist MEKRA turning assistant Central locking with remote control Sun visor Roof spoiler Heated front mirror Left side sun blind Reversing alarm Fleetboard Eco Support LED daytime running lights Fog lights Tool box Side work lights Light/rain sensor Hill start assist Diesel particulate filter Nodpfx Ajtk Iktjd Nscl Front LED light package Perforated outer frame Interior lighting in body Leasing and financing options available on request!!!

Condition: excellent (used), Year of construction: 2007, operating hours: 15,700 h, functionality: fully functional, Equipment: compressor, documentation/manual, Müller Martin Sammelhefter Bravo Plus T comprising: 4 x double feeders 1555.0403 incl. ASIR, 1 x folding feeder 1529.0417, 1 x Semko 0333.0435 (year 2018), 1 x stitching machine 0380.0450, 1 x three-knife trimmer 0449.0430. Includes DruVa pumps, optional PIAB. Njdpfxjyamrlj Ad Nscl

Condition: used, mileage: 455,585 km, power: 390 kW (530.25 HP), first registration: 05/2021, fuel type: diesel, overall weight: 19,000 kg, tire size: 385/65R22,5, axle configuration: 4x2, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, number of seats: 2, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), hydraulics, onboard computer, parking heater, soot filter, traction control, Yourtrucks Group Ncodpfew Tlblex Ad Nel The Yourtrucks Group maintains business relations around the globe. Both purchasing and sales extend beyond national borders, which is why you will always find the export price in our listings, as this is independent of the intended place of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information is provided as general information only and does not replace detailed, individual consultation when making a purchase decision. Only the provisions contained in the purchase contract are binding. Subject to changes, errors, typographical errors, and prior sale. Our general terms and conditions apply exclusively. Languages - We speak English - On parle français - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: new, functionality: fully functional, overall weight: 105 kg, Year of construction: 2025, Slurry-free, steerable boring machine ALUSTEER – a modern steerable thrust-boring machine Nedpfxoxxhzwe Ad Necl

Condition: excellent (used), Year of construction: 2002, Complete system with support/transport table with edge delamination and storage rack for laminated safety glass. Automatic glass stop and glass-rotating device. Ncedexap Axjpfx Ad Nel

Condition: used, functionality: fully functional, Year of construction: 2007, Tracto Technik Horizontal boring rig on rubber tracked undercarriage Year of manufacture: 2007 Drive motor for travel and drilling: 55 kW 2 support and push blades Engageable percussion system Nodpfx Ajxn T R Njd Nocl Semi-automatic rod lubrication unit Hydraulic drill rod changing system Hydraulic clamping and release device Drilling automation incl. power level adjustment 2 x threaded adapters 126 m percussive drill rods Drill lance with steering head

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard features include Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or gets too hot, to protect the torch package. These functions cost approximately €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our experience, the most useful wire feed case – the wire is securely stored in the closed case. ➤ Fronius Intermediate Hose Package, long version – each machine is supplied with a 5-meter-long connection hose between the power source and the wire feed case for greater flexibility and improved handling. Take the wire feed case off the machine to access hard-to-reach areas! The connecting hose is neatly stored on a hook on the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with a gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage control on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket reel adapter for large wire spools With this machine, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It features pulse wire programs and is also suitable for MIG brazing (CuSi), commonly used in the sheet metal industry. Additional options are available at extra charge For example: Fronius Aw4000/Aw5000 Job Master Torch Package (with display on torch) + EUR 550.00 ----- Nedpewbil Sjfx Ad Necl IMMEDIATELY AVAILABLE PROPER INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What is the condition of the equipment? For clarification: we purchase nearly new used equipment, disassemble and thoroughly inspect everything, replace wear parts as necessary, and only after a successful test weld do we release the equipment for sale. "All" machines are clean with no burn marks on the displays and without numerous burn holes or dents! With us, you buy an item that is ⭐in excellent condition and doesn’t look worn out! ►►► Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►► What payment options are available? Prepayment or cash on personal collection. ►►► Why buy from us? We are experts in this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we don’t have expertise in.

Condition: used, Year of construction: 1989, color: orange, overall weight: 12,000 kg, maximum load weight: 10,134 kg, empty load weight: 1,866 kg, loading space volume: 10 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 700 mm, mileage: 1,001 km, first registration: 01/1989, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, doors Body: Roll-off container with hinged doors, approx. 10m³ ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nodpevhn Ugjfx Ad Necl - .

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. Ncedpfxjg Ezare Ad Nsl *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, empty load weight: 705 kg, maximum load weight: 1,895 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,760 mm, loading space width: 1,790 mm, loading space height: 2,010 mm, loading space volume: 13.7 m³, color: black, construction height: 2,370 mm, working width: 2,330 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, aluminium body / side flap / side door / 100 km/h / tailgate hinged door, * IMMEDIATELY AVAILABLE * incl. Aluminum body / side flap / side door / 100km/h / tailgate hinged door TECHNICAL DATA - Make: Debon - Model: Roadster C700 - Vehicle type: Box trailer - Vehicle condition: New vehicle - First registration: without first registration - TÜV/HU: 2 years from first registration - Interior dimensions (LxWxH): 376 x 179 x 201 cm - Exterior dimensions (LxWxH): 499 x 233 x 237 cm - Loading height of floor: 35 cm - Perm. Total weight: 2,600 kg - Unladen weight: 705 kg - Payload: 1,895 kg - Chassis: Low loader (wheels next to the body) - Tyres: 185/65R14 - Chassis: Pullman2 coil spring - Support wheel: Yes, automatic - 100km/h approval: Yes DESCRIPTION - Double-walled and anodized aluminium side walls - Anodized aluminium floor - Full poly roof and front in color - Continuous interior height: approx. 187cm - Continuous interior width: approx. 181cm - Drive-on flap made of aluminum with optional lock lockable - Drive-on flap as flap / door system (can be used as flap or door) - Side flap, lockable, right - Side door front left lockable, 127x61cm (HxW) - Lashing eyes mounted on floor - Interior light - Torsion-resistant chassis - Stable cross members thus high point load - PULLMAN V2 chassis Independent wheel suspension with trailing arm,coil spring and shock absorber lowered with very low centre of gravity and galvanized - 100km/h with manufacturer's certificate - automatic reversing - Knott overrun device and parking brake - stable V-drawbar - plastic mudguards - 13-pin plug - reversing lights - large rear lights - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - automatic center support wheel - body: splash-proof not waterproof Accessories can be retrofitted - please enquire: - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - slotted-hole rails for tensioning straps & locking beams - bar strip with rubber coating for tensioning straps & locking beams - steel or aluminum locking beams - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Ncjdpfx Aeu Hrwaod Njl

Condition: excellent (used), functionality: fully functional, SELECT 33300 Drilling machine for wooden stairs. To drill the banister holes in string boards and hand rails. The machine has a hydraulic feed regulation (no splintering of the holes) Ncodpfx Aovl E Tbed Njl 400 VAC , 1,5 kW, 6 Bar. The drilling device can turn 60 Degree to the leftr and to the right. The drilling tool can be clamped by a collet. Line laser for positioning of the workpiece.

Year of construction: 1997, condition: not inspected (used), Cluster packer / foilwrapper make: Novopack type: CD1 110+SL070 Ncodpfoia I Ifsx Ad Nel Dimensions 3600x2000x2150mm sealbar first operation 1050mm side sealbar 650mm Infeed conveyor Flexlink 10Kw as-is or adjusted to customer needs

Year of construction: 1990, condition: like new (used), Make: Imball Type: Linear Hot melt Cardboard Multipacker Model: Multipack 200R P340 Dx Serial Number: 909080040 Year: 2001 Capacity: up to 180 multipacks per minute Tooling: Can diameter 73 mm in packed in 3 pack(several package possible 1 pack-2pack-3pack) Nsdpofx R Rtofx Ad Njcl Range: Can diameter 55-100mm Can Height 35-180mm Frame: Aluminum / Steel coated Dimensions: L x W x W = 6500 x 1300 x 2600 mm. Weight: 2500Kg Power: 380V 3P+N+E, 50Hz, 10Kw Air Pressure > 6 bar, Features: Siemens SPS and touch panel

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, overall weight: 7,650 kg, total height: 3,500 mm, total length: 3,410 mm, total width: 1,270 mm, If you are interested, I am happy to send the technical datasheet. - Radial drilling machine HCP GRV 554 - Year of manufacture: 1985 - Price is ex works, loaded in 27729 Hambergen - The machine can be inspected; please schedule an appointment - The machine is sold without warranty or guarantee. However, it has always operated reliably until disconnection - A box table is also included, dimensions: 1200 x 750 x 500 mm Nodpfx Adox A Dpfe Njcl - Machine weight: 7,650 kg - Machine dimensions: 3,410 x 1,270 x 3,500 mm - We are happy to assist with transport/installation; costs are quoted in advance at a fixed price!

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 57/2005, travel distance X-axis: 400 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 305 mm, workpiece diameter (max.): 260 mm, tool length: 900 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 310 mm Travel Z-axis: 305 mm Max. workpiece diameter: approx. 260 mm Max. tool length: approx. 900 mm Spindle power: up to 24 kW Tool holder: SK 50 Speed range: up to 12,000 rpm Grinding wheel changer: 8-position Tool changer: 155-position A-axis swivel range: 360° C-axis swivel range: 224° Feed rate: 2,000 mm/min Ncedpfx Adoxqpito Nsl MACHINE DETAILS Control: PMAC Dimensions & Weight Dimensions (L x W x H): 2,900 x 1,800 x 2,015 mm Total weight: 4,000 kg EQUIPMENT 8-position grinding wheel changer for up to 24 grinding wheels 155-position chain loader for automatic operation Workpiece gripper Measuring probe Automatic central lubrication system Direct position measuring system Infinitely variable spindle speed / feed rate control Hydraulic chuck 1 set of hydraulic collets Additional collets of various diameters for chain loader Grinding wheel holders with spacer rings Documentation Note: The LUST board (inverter drive) is defective and must be replaced.