Used Rectifier for sale (133)

Condition: excellent (used), Overband magnetic separator Electromagnet width 1600 Axle distance approx. 2.5 m Suitable for transverse discharge Pole extension Rectifier and drive motor are new Nsdpfx Asw H Imfef Esdc

Condition: ready for operation (used), Goudsmit Electro Magnetic Conveyor Belt Brand: Goudsmit Nodpfx Aettx Etef Esdc Type: Heavy duty. Dim. Belt Conveyor: A-A = 3500 mm Beltwidth: 2000 mm Driving: Gearbox Dim. block : 2300 x 2000 x 500mm Power: 9,8 kW Incl. rectifier.

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm Nedjtq I Rqspfx Af Eodc weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Machine dealer with own stock of 1600 m².

Condition: good (used), functionality: fully functional, type of input current: three-phase, overall weight: 800 kg, total width: 600 mm, total length: 820 mm, total height: 1,600 mm, input voltage: 400 V, Used Liebert NX 40kVA / 32kW 3-phase UPS battery backup system (tested and includes good batteries) Rated power: 0.8 PF: 40 kVA Output power 32KW Battery Battery type VRLA 40x YUASA NPL24-12 I 12V 24 AH Width mm 600 Depth mm 825 Height mm 1600 Weight (approx.) without battery kg 341 Input Parameters Rectifier Type IGBT-based Vector Controlled PFC (PF Corrected) Input Voltage to Rectifier Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 3-w Input Voltage to Bypass Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Permissible Input Voltage Range for Rectifier Vac 305 to 477 Input Frequency Hz 50 or 60 Permissible Input Frequency Range for Rectifier Hz 40 to 70 Input Current THD at nominal voltage % < 3* without any Filter Input Power Factor at nominal voltage ≥ 0.99* without any Filter Flexi Power Walk-In seconds 5 to 30 (selectable) Output Parameters Inverter Type IGBT-based Vector, Repetitive & PI Controlled Output Power kW 24 32 48 64 Output Voltage Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Output Voltage Regulation % +/- 0.5 (3-phase RMS average) Ndsdpot H Irljfx Af Ejc Output Frequency Hz 50 or 60 Output Frequency Regulation % +/- 0.05 Output Voltage THD at nominal voltage % 1% (max) Capability to handle High Crest Factor Load 3 : 1 (compliant with IEC 62040-3) Capability to handle Step Load 0-100 or 100-0 Transient Recovery mseconds < 0.5 (recovery to 95% of the voltage level) 10 (recovery to 99% of the voltage level)

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, working width: 1,080 mm, area performance: 7,560 m²/h, overall weight: 1,385 kg, warranty duration: 12 months, water tank capacity: 260 l, HAKO SCRUBMASTER B260 R WB1080 SCRUBBER NEW HAWKER PERFECT PLUS 36V 480Ah TRACTION BATTERY (6PZS480) NEW NEOS 36V 50A CHARGER 2020 production year 1080mm cleaning head (WB1080) equipped with two new medium hardness cylindrical brushes, enabling work on any surface. New rubber squeegees made of high-quality natural rubber New protective rubbers around the brush head prevent water from splashing outside the machine's outline The device is equipped with a new durable drain hose and a new suction hose The new suction turbine ensures high water suction power from the squeegees Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply voltage: 36 V Working width of brushes (mm): 1080 Suction width (mm): 1290 Theoretical efficiency (m²/h): 7560 Tank capacity clean/dirty water (l): 260/260 Number of brushes (pcs): 2 Brush revolutions (rpm): 640 Working speed (km/h): 7 Total weight, ready to work (kg): 1385 DIMENSIONS: Length with squeegee (mm) 2020 Height (mm) 1490 Width with squeegee (mm) 1290 Width without squeegee (mm) 1210 INCLUDED: NEW TRACTION BATTERY HAWKER PERFECT PLUS 36V 480Ah (6PZS480) NEW NEOS 36V 50A RECTIFIER NEW cylindrical brushes 1080mm (x2) NEW suction turbine 36V 700W NEW drain hose NEW suction hose NEW head protection rubbers (x2) Suction bar with new rubbers Tenzi Normal 5L fluid - FREE KEY FEATURES: A 260-litre tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very manoeuvrable. A small turning radius also allows you to work in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface The ergonomically designed cockpit and the centrally located operator's seat provide good visibility of the cleaned surface The large working width (1080mm) ensures high surface efficiency Ndedpfxjwtdp Aj Af Eoc A very legible and intuitive control panel.

Condition: excellent (used), Year of construction: 2018, Automatic Galvanizing Barrel Plating Line GALWANOTECHNIKA (2018/2021) Technical Data Summary (Focus on Components and Capacity): ● Machine Type: Automatic Galvanizing Line, Barrel Type (Zn - Zinc Plating). ● Manufacturer: GALWANOTECHNIKA. ● Year of Manufacture: Main structure 2018, significant modernization 2021 (documented). ● Capacity: Approx. 220 tons/month (based on 3-shift operation, suitable for nails/small parts). ● Condition: Complete, operational, and assessed as very good post-modernization. Key Components Included: ● Plating Barrels/Aggregates: 7 units (purchased new in 2021 for nail plating). ● Rectifiers (Total 7 pcs): ○ 6 units x 400A/1700A (Year 2017). ○ 1 unit x 800A (Year 2017). ● Plating/Rinsing Tanks (Total 17 pcs): Includes tanks for galvanizing, cascade rinsing (3- and 2-station), and passivation (Year 2006 per statement). Ndjdpfxsxm Ttze Af Ejc ● Automation: Control Cabinet/Switchboard (Year 2018), Plating Hoists (Year 2016). ● Wastewater Treatment (LPW-ANLAGEN tanks): Scrubber, Fan, and complete Wastewater Treatment Station. ● Auxiliary Equipment (Modernization 2021): Full PE Acid-resistant Drip Tray under the line, Chemical Laboratory with equipment. Commercial Details: ● Documentation: Technical-Operating Documentation (DTR) available.

Condition: new, Year of construction: 2017, Dry epoxy cast traction rectifier transformer - manufacturer TESAR Italy, power 2800kVA 20(2x±2,5%)/2x0.586kV, Dd0yn11, IP00 (without protection), load level IV (IEC6016), 100%-2800kVA-continuous, 150%-4200kVA-2 hours, 300%-8400kVA-60s, standard losses according to IEC, Al-Al winding, electrostatic screen, dimensions 2.45x1.4x2.7m (lxwxh), weight 7500kg, never used, complete documentation and test report, 6 pcs in stock, year of manufacture 2017, suitable for battery storage systems BESS, can be installed outdoors in case of IP33 protection. Price negotiable Nodpfx Aoxlybcof Eodc

Condition: ready for operation (used), Steinert Electro Magnetic Conveyor Belt Brand : Steinert *1 piece: Length frame A-A = 2200 mm Beltwidth: 1000 mm Nedpfxjnac H Ie Af Eedc Driving: 2,2 kW Gearbox Dim. Block : 1400 x 950 x 450mm Incl. Rectifier SOLD: *1 piece: Length frame A-A = 3300 mm Beltwidth: 1900 mm. Driving: 4 kW Gearbox Dim. Block : 2400 x 1800 x 600mm Incl. Rectifier SOLD: *two pieces: Length frame A-A = 1800 mm Beltwidth: 800 mm Driving: 1,5 kW Gearbox Dim. Block : 1000 x 750 x 400mm Incl. Rectifier

Condition: new, Year of construction: 2025, Fully electric mast truck with a capacity of 1,200 kg and a lifting height of 2,500 mm. Its undoubted advantage is the total height of 1830 mm, which allows easy adaptation to any door. Characteristics of the Q12E25 trolley: The fully electric mast truck with a capacity of 1,200 kg and a lifting height of 2,500 mm is a unique solution in the field of storage and transport. Its undoubted advantage is not only its impressive ability to lift heavy loads, but also its exceptionally low total height of only 1,830 mm. Regardless of the type of surface, the mast trolley equipped with polyurethane wheels is perfect for various surfaces. These wheels are extremely durable, abrasion-resistant and guarantee smooth and quiet movement of the stroller. An additional advantage of this stroller is the ability to choose from two driving modes. Thanks to this, the operator can adapt the truck to a specific situation and needs, thus increasing his efficiency and precision of work. Regardless of the conditions and requirements, the mast trolley ensures reliability, safety and comfort of use. A solid structure made of high-quality steel ensures greater stiffness and stability when lifting. The mast truck is also equipped with important safety features. The mast trolley is also equipped with a LED battery charge indicator and a "belly" safety switch that prevents it from colliding with the operator. A sealed, maintenance-free AGM battery and a built-in charger with rectifier ensure convenient use and minimize the need for battery maintenance. Additionally, the speed controller ensures safe driving and speed limits, and the turtle driving mode allows precise maneuvering in tight spaces. Lifting and lowering is done electrically under the operator's full control, ensuring precise and safe operations. We do not require technical inspections during the warranty period. Our mast truck is solidly constructed and performs to a high standard, eliminating the need for regular inspections during this time. We are confident that our product will meet your expectations in terms of reliability, performance and safety. WHEELS AND ROLLERS MADE OF POLYURETHANE Rollers of this type are characterized by high abrasion resistance and increased resistance to mechanical damage. They are universal and work perfectly on various types of surfaces. They generate minimal rolling resistance, which makes maneuvering and moving on the surface easier. Technical parameters MAX LIFTING HEIGHT 2500 mm CAPACITY 1200 kg CENTER OF GRAVITY 600 mm FORK LENGTH 1150 mm EXTERNAL FORK WIDTH 550 mm HEIGHT WITH FORKS LOWER 1830 mm HEIGHT OF RAISED MAST 2950 mm HEIGHT OF LOWER FORKS 85 mm TOTAL WIDTH 790 mm TOTAL LENGTH 1800 mm CLEARANCE 30 mm TURNING RADIUS 1390 mm TRAVEL SPEED WITH / WITHOUT LOAD 3.5 / 4.0 km/h LIFTING SPEED WITH/WITHOUT LOAD 100/200 mm/s Ndedpfx Afsrh Eybs Eec LOWERING SPEED WITH/UNLOAD 120/100 mm/s HILL CLIMBING ABILITY WITH/UNLOAD 3/10% WORK BRAKE TYPE electromagnetic DRIVE ENGINE POWER 0.75 kW LIFTING SYSTEM MOTOR POWER 2.2 kW BATTERY CAPACITY 12V 85Ah 2 pcs. WHEEL MATERIAL Polyurethane WEIGHT 450 kg

Condition: excellent (used), Year of construction: 2015, operating hours: 6,019 h, lifting height: 3,300 mm, fuel type: electric, mast type: duplex, construction height: 2,150 mm, fork length: 1,150 mm, tire condition: 100 %, Equipment: sideshift, Toyota 8FBET 16 Load capacity 1600 year of production 2015 Side shift lift height 3300 mm folded mast 2150 mm Duplex mth 6019 48V battery from 2109 rectifier included Njdpfxsrwx R Ss Af Ejdc 3 wheel

Condition: used, mileage: 400,000 km, Year of construction: 2016, Serial number: WDB9642241001xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20562 Specifications: Model year: 2016 Mileage: Approx. 400,000 km EU approved until: 08.05.2026 Engine: 578 hp, Euro 6 Drivetrain: 6x2 Transmission: Automatic Suspension: Air suspension front and rear Wheelbase: 330 / 135 cm Ndodpfowph D Nex Af Esc Retarder Case and tires: See pictures for details Extras: Compressor horn, AC/climate, Radio with DAB Condition: Ready for delivery Description: 2016 Mercedes-Benz Arocs 2658 6x2 tipper. Previous sensor errors have recently been rectified. Ready for delivery Km: 400000 HK: 577 Technical approved: Yes EU-approved until: 08.05.2026 Own weight: 14300 Total Weight: 28000 Payload: 13625 Width: 255 Length: 746,5 Euro: 6 Model: Arocs 2658 Gearbox: Automatic

Condition: ready for operation (used), Year of construction: 1994, Capacity: 300l, working position 0-40kg: 22° from horizontal, working position 40-260kg: tilted 45°. Main drive gearbox type: RF 73DT 80N4 SEW (Siri 52/72/8BA), power: 0.75kW, design: B 5, rated current: 3.8/2.2A, position: KLK 90°, voltage: 220/380V, 50Hz, multi-range, speed: 21-1400/min, seal: Kaco Ø 50 high, D-seal: SV-full. Tilting gearbox type: KA76 TR42 DT71 D4 BM SEW, hollow shaft diameter: 50mm, power: 0.37kW, design: H 4A, rated current: 2.25/1.3A, position: KLK 0°, voltage: 220/380V, 50Hz, multi-range, speed: 1.6-1400/min, braking torque: 5Nm, brake voltage: 220V, rectifier: BG 1.5. With operating manual and documentation. An inspection on site is possible. Nsdsxg Ri Hspfx Af Esdc

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 145200 € 2744.28 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm 6 bar 4200 mm 2300 mm 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th... Ndjdpfswir Daox Af Eoc

Condition: ready for operation (used), Krupp Electro Magnetic Conveyor Belt, Heavy Duty Block : L= 1650 x W=1200 x H=600 mm Power Block = 7,7 kW Power Drummotor = 5,5 kW Beltwidth: 1400 mm, A-A = 3200 mm Speed = 2,5 m/sec. Including rectifier (new) Njdpexnnddofx Af Ejdc Weight appr. 7500 kg On stock 1 piece.  

Condition: excellent (used), Year of construction: 1996, ESAB LHF 400 Welding Rectifier / Electrode Welder Infinitely variable welding current range up to 400 A, power 400 A at 35% duty cycle, 315 A at 60% duty cycle, weight 165 kg, ... Ndjdpfx Aev N Hkcef Esc Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 7,000 mm, total width: 4,750 mm, total length: 6,000 mm, pressing force: 1,000 t, reverse speed: 60 mm/s, The MV-1000E/NC-SINCRO hydraulic press is custom-designed for the adjustment of progressive dies. It features a tilting upper table and a movable lower table made of C45E steel, machined with DIN-650 T-slots to ensure minimal friction in the vertical movement of the upper table. This is achieved through the installation of maintenance-free bimetallic bushings and perfect parallelism ensured by four high-mechanical-resistance cylindrical columns of 300 mm in diameter, chrome-plated and rectified. STRUCTURE AND TABLES • Features a structure made from oxy-cut steel divided into three electro-welded monoblocks, exclusively manufactured from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed with finite element software. • Cylindrical columns with a diameter of 300 mm, high mechanical resistance, rectified, and chrome-plated to maintain a low friction and wear coefficient. • Upper table with T-slots and anti-fall safety system. • Useful table surface: 4,750 x 2,250 mm. • Structure designed to support 600 TN of concentrated force on 1/3 of its surface. • Lower table designed to support up to 50 TN in displacement, supported by bronze guides with graphite load and mechanical positioning centers for precise table positioning. CYLINDER AND HYDRAULIC GROUP • 6 single-acting cylinders with lapped sleeves, chrome-plated pistons, and anti-wear guides. • Four 50 TN hydraulic compensators located at the ends of the lower table. • 800-liter hydraulic group with a silent Denison pump, automatic disconnection of the fast approach pre-filling speed, and equipped with a decompression system in working speed. • Proportional pressure system and optical gauges for displacement control on the upper table, with a synchro-electronic system for compensating off-center or unbalanced forces. • Hydraulic group cooling system with an independent air-oil radiator unit. • All M series hydraulic presses include a lateral pressure switch to adjust the most suitable pressure setting for each type of work. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC model SIMATIC S7 1200 and a 12” touchscreen. Allows programming of semi-automatic and automatic operating modes, power, travel, and upper table dwell time. Capable of storing 300 recipes, with each recipe able to program all the above values. • Low voltage operation via two-hand pushbutton. • Anti-fall safety system with hydraulic safety jaws. • Level IV photoelectric barriers installed at the front and rear. • Lateral protections with opening and safety microswitches. TECHNICAL SPECIFICATIONS Power tn 125 - 1000 Opening Force tn 100 Powered Speeds 1 Engine Power kW 75 Fast Pre-Fill Speed mm/s 100 Variable Working Speed mm/s 12-4 Return Speed mm/s 60 Guide Diameter mm 300 Maximum Pressure Bar 290 Useful Table Area mm 4.750 x 2.200 Lower Table Displacement mm 2.200 Vertical Travel of Upper Table mm 800 Between Columns mm 5.000 x 1.490 Total Front mm 6.000 Total Side mm 4.750 Nsdpfx Afewpgwno Ejdc Total Height mm 7.000 Weight kg 150.000

Condition: good (used), Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Manufacturer: Fronius, remote control RCU5000i .: 4,046,098 Ndsdpfjgrlppox Af Ejc -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg

Condition: ready for operation (used), BAUMÜLLER BUH2-90/90-62-102-00 Power converter unit, inverter/rectifier good condition tested traces of storage storage find like pictures For further technical information please refer to the pictures Ndedpfstrlt Ejx Af Esc Scope of delivery as shown Auction price includes 19% VAT and invoice Shipping/collection by arrangement Express shipping also possible worldwide / Worldwide express-shipping possible. No guarantee / warranty Due to the new warranty law we are obliged to inform you of the following: Even if the goods are new or used, we sell the goods as spare parts without warranty as we often deal with used products from dismantling or insolvency goods, a warranty within the legal framework is not possible for us. Trading between traders is one way of excluding the statutory guarantee or warranty. If you have any questions, just write to us. No. B6491

Condition: used, Year of construction: 2016, Power Touch control (touch screen system) with 21" full HD video Panel height 60 mm Pvc/Abs 3 mm Solid wood up to 12 mm Feed speed up to 20 m/min Working height electronically adjustable by N.C. Panel support guide with idle routines Side roller conveyor with idle wheels for panel support Anti-adhesive group Two-motor rectifier group Roll holder plate EVA glue gluing group with pre-melting unit and glue pot Edge pressure group on straight profiles with pressure rollers automatically adjustable by numerical control End trimming group with automatic inclination adjustment Two-motor chamfering group with adjustment 2-motor multifunction rounding group (chamfering + rounding) Edge scraping group with electronic adjustment by numerical control Glue scraping group Brush group Anti-adhesive group Ndsdpfx Afewwtpys Eec

Condition: ready for operation (used), Electro Magnetic Block. Ndodpfx Ajw Dxq Ajf Eec Brand: Krupp. Dim. Block : L= 1650 x W=1200 x H=600 mm. Power Block = 7 kW, 35 Amp. Weightt appr. 3,5 – 4 tons. Including rectifier (new).

Condition: ready for operation (used), Steinert Electro Magnetic Conveyor Belt Brand: Steinert Length frame A-A = 1900 mm Beltwidth: 900 mm Ndedpfx Aow Tp Enjf Eoc Driving: 2 kW Gearbox Dim. Block : 1000 x 1200 x 500mm Including rectifier.

Condition: ready for operation (used), Master Magnets Electro Magnetic Conveyor Belt brand: Master Magnets Limited Length frame A-A = 2200 mm Beltwidth: 950 mm. Driving: 2,2 kW Gearbox Dim. Block : L= 1500 x W=800 x H=570 mm Ndjdpfjw Dxr Hex Af Eec Power Block = 2,5 kW Including rectifier.

Condition: ready for operation (used), Lenoir Electro Magnetic Conveyor Belt Brand: Lenoir Dim. Belt Conveyor: A-A = 2700 mm Beltwidth: 1200 mm. Driving: 3 kW Gearbox Dim. Block : L= 1800 x W=1200 x H=450 mm Power Block = 10 kW Ndedpfx Asw Dxraef Eoc Including new rectifier.

Condition: ready for operation (used), Wagner Electro Magnetic Conveyor Belt Brand: Wagner Length frame A-A = 2600 mm Ndodjw Uqh Tepfx Af Esc Beltwidth: 1200 mm Driving: 3 kW gearbox Dim. Block : 1600 x 1100 x 600mm Including rectifier.

Condition: ready for operation (used), Steinert Electro Magnetic Drum Brand: Steinert Dimension drum : Lenght 1300 mm , Ø 500 mm. Driving: 4 kW Gearbox. Ndedpfsu Tlr Isx Af Ejc Power drum = 3 kW. Including new rectifier.