Used Recoil Plate for sale (10,793)

Condition: used, Year of construction: 1988, plate width 2500 mm plate depth 4000 mm plate height 345 mm Dedpsy Ty Rvefx Agvoch no. of flutes 11 2 weight of the machine ca. 7000 t

Year of construction: 1989, condition: ready for operation (used), A guillotine shear is offered. Cutting length: 6000mm, cutting capacity: steel (approx. 400N/mm²) 6.0mm, stainless steel: approx. 4.0mm, stroke rate depending on material, typ. 4-10strokes/min, back gauge: 1000mm, cutting angle: approx. 0.5°-2.5°, overall dimensions X/Y/Z: approx. 7200mm/2400mm/2300mm. Inspection possible by appointment. Djdpfx Agjzadl Aevsch

Condition: used, Year of construction: 2009, CNC-controlled round bending machine Schröder-Fasti Type 114 Year of manufacture: 2009 Condition: Used, like new Exhibition machine Operating hours: < 50 hours Technical data 10/1.0 10/1.5 Useful length (mm) 1080 1080 Sheet thickness (400 N/mm²) 1.0 1.5 Roller diameter (mm) 68 80 Motor power (kW) 8.2 8.2 Weight (kg) 1780 Standard equipment: - CR80 control system on a rotatable panel, frequency-controlled rear roller positioning - Rollers, approx. 700 N/mm² tensile strength - Three-roller drive - Hydraulic adjustment of the bending rollers - Hydraulic adjustment of the lower rollers - Automatic opening of the upper roller bearing - Foot switch Dsdpfsy Twfqsx Agvsch - Electrical safety control Optional equipment: - Rollers hardened and ground, roller diameter 68/80 mm - Tube ejector - Hydraulic tube support for large tubes

Condition: excellent (used), Year of construction: 2001, sheet width 4000 mm Dedpfx Asy Diahegvjch plate thickness 16 mm total power requirement 37 kW weight of the machine ca. 20 t dimensions of the machine ca. 4700 x 2100 x 2000 mm

Condition: good (used), Offer 25350 Technical data: - Width approx. 1250 mm - Height approx. 1600 mm - Depth approx. 1000 mm - Plate thickness T – groove side approx. 90 mm - 8 T-grooves, length 1250 mm each - Distance between the centers of the T-grooves: 200 mm each - Distance from the outside edge: 100 mm - T-groove width approx. 35 / 60 mm - T-groove depth approx. 28 / 32 mm - Weight approx. 1400 kg Dodpfszaak Iex Agvech

Condition: used, plate width 3000 mm plate depth 4000 mm plate height 370 mm no. of flutes 12 Dedpfxehrrlue Agvoch flute distance 210 mm

Year of construction: 1984, condition: ready for operation (used), Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line illumination, with documentation. An on-site inspection is possible. Dcedpfxsy U Nqbo Agveh

Condition: used, 1 WACKER VP1340 LOW VIB vibratory plate Dcedsy Tkfqjpfx Agvjh on a pallet Color: as shown in the pictures, in accordance with the images and inspection Condition: used

Condition: good (used), Clamping plate, welding table, welding table, straightening plate Dsdpfx Aoy Tit Hogvsch -Clamping plate: solid design, with large vise -Clamping surface: 1200 x 1100 mm -Table height: 850 mm -Sheet thickness: 105 mm -Vise: Jaws 150 x 30 mm, clamping range 245 mm -Overall dimensions: 1300/1200/H1060 mm -Weight: 1100 kg

Condition: used, floor-plate length 7000 mm floor-plate width 2500 mm floor-plate height 300 mm number of T-slots 10 total power requirement . kW weight of the machine ca. 20 t dimensions of the machine ca. 7000x2500x300 m Dcjdpfxoyqv Tge Agveh The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Dcodpotqfhxjfx Agvjh Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Year of construction: 2026, condition: used, NEW – Year of construction 2026 Automatic loading and unloading station. Suitable for solid wood, MDF, gypsum fiberboard, cement fiberboard, and panel materials. Examples: doors, boards, MDF panels, fronts, gypsum fiberboard, facade panels. Dsdjy S S Htjpfx Agvjch Adaptations to other products are possible. The machine operates at a constant speed and with a set loading and unloading capacity. This allows you to easily automate your feeding and stacking processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel. Technical data: - Manufacturer: Ka-Ma - Type: KR-1300-1 - Working width: 1,300 mm - Including belt conveyor, length 3,000 mm - Working height: 930 +/– 50 mm - PLC control, operation via a touch panel, Siemens S7-1200 - Loading and unloading of parts using 2 suction plates, length 442 mm - Automatic signal after the loading process is completed - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height: approx. 1,000 mm (including pallet under the stack of panels) - Loading side on the left when viewed in the direction of travel - Vertical working stroke: approx. 1,200 mm - Max. lifting weight: approx. 85 kg, continuous operation 65 kg - Max. component width: 1,300 mm - Max. component length: approx. 2,850 mm - Max. conveyor belt speed: continuously variable up to max. 10 m/min - Electrical motor power: 1.5 kW - Electronic components: Schneider Electronics and Siemens - Weight: 1,200 kg Optional: - 2-circuit vacuum system with 4 additional suction cups, which lifts the panels by 15 mm on one side before the vertical movement. This is required for all through-suction materials.

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: Straightening plate with support ribs and adjustable feet -Length: 3000 mm Dcodpfxjy S Rnis Agvsh -Width: 1250 mm -Sheet thickness: 48 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 3000/1255/H900 mm -Weight: 3500 kg

Condition: excellent (used), 2 black pieces H 1800 x long. 600 x W 800 mm Dcodpfoma E Eqjx Agvjh

Condition: used, length 700 mm width 500 mm height 105 mm weight 260 kg The electro-magnetic clamping plate is in good, ready-to-use condition. Length: 700mm Width: 500mm Height: 105mm Djdpfxoy S D Rwj Agvjch Weight: 260kg We have two identical magnetic chucks with the same dimensions. See S9063

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° total power requirement 30 kW Dodpfxey S D Nmj Agvsch weight of the machine ca. 19 t Machine was overhauled in 2010 and was modernized with light barrier at table. Machine will be sold with automatic back stop with DRO. including flat belt conveyor

Condition: new, plate width 900 mm plate depth 600 mm plate height 55 mm weight 55 kg dimensions of the machine ca. 900 x 600 x 50 mm Clamping plate 900 x 600 x 55 mm If you have not found your desired size, you can also send us an e-mail with the completed PDF form. With this, we can have a plate made for you individually. Please note that (only) these plates are not symmetrical and not parallel. Number of slots: 3 Djdpfxoy S D Ehj Agvjch Distance from edge: 140 mm Slot spacing: 270 mm Slot width: 14 mm Casting quality HT250

Condition: new, plate width 1000 mm plate depth 700 mm plate height 2000 mm weight of the machine ca. 1800 kg required space 1000 x 700 x 2000 mm The GERD WOLFF clamping bracket, with overall dimensions of 1000 x 700 x 2000 millimetres, is equipped with a T-slot plate. If you have not found the size you require, you can also send us an e-mail with the completed PDF form. We can use this to produce a customised panel for you. T-slots - width: 22 and 38 millimetres Panel thickness: 50 millimetres Number of grooves: 8 Surface finished according to DIN 876/III Weight: 1800 kg Material: EN-GJL-250 The cast iron grade EN-GJL-250, characterised by lamellar graphite, is characterised by high thermal conductivity, excellent damping properties and good dimensional stability. This material also combines good machinability with high compressive strength and vibration-damping properties. EN-GJL-250 is particularly suitable for mechanically stressed machine components, as it is also easy to machine and has an outstanding surface finish. Clamping cube - T-slot plates - Plate field Dcsdpjy S D D Dofx Agvsh

Condition: used, length / mm Dsdpfx Aoy S Dzpogvoch width / mm

Condition: used, plate width 2870 mm plate depth 2000 mm plate height 300 mm weight 5200 kg flute distance 250 mm 3 identical plate fields available (A2017) LxWxH: 2870 x 2000 x 300mm Area for 3 slab fields: 17.22m² Dcedpfjy S Dzijx Agvoh Dimension of the T-slots; 36 x 64 mm - height: 45 mm Weight: KG

Condition: new, plate width 2000 mm plate depth 1500 mm Dcsdpfx Agey S Dupovoh plate height 310 mm weight 2385 kg dimensions of the machine ca. 2000 x 1500 x 300 m Clamping plates - T-slot plates - panel array 2000 x 1500 x 310 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this we can to have an individually manufactured panel made for you. Number of grooves: 5 edge distance: 135mm groove spacing: 270mm Groove width: 28mm Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III

Condition: new, plate depth 6000 mm plate width 1100 mm plate height 200 mm weight of the machine ca. 4100 kg required space 6000 x 1100 x 200 mm GERD WOLFF clamping plate 6000 x 1100 x 200 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slots - width: 42 x 22 mm T-slot spacing: 200 mm Number of slots: 5 Edge distance: 125 mm Casting quality HT250 Flatness less than 0.12 mm Dcedpfx Agjy S Dnvsveh Surface machined according to DIN 876/III Keywords: Clamping plate, Machine table, Workpiece clamping, Fixing holes, Clamping system, Tool clamping surface, Clamping device, T-slot plate, Precision plate, Modular clamping plate, Hole system, Mounting plate, Workpiece fixation, CNC machine clamping plate, Machine base

Condition: used, Technical details: sheet width: 1500 mm plate thickness: 2,25 mm distance between columns: 1600 mm back gauge: nein cutting angle: nicht bekannt ° cutting gap adjustment: nein mm down holder: über Druckleiste Stück height over floor: 850 mm Dodpfx Aeu Icn Eogvjch Table dimensions: LXB 1800 x 350 mm weight of the machine ca.: 0,85 t dimensions of machine: 2,0 x 0,8 x 1,3 m simple mechanical guillotine shear with shelf right/left 305 x 100mm operation via ON/OFF *

Condition: used, Year of construction: 1992, Technical details: sheet width: 3000 mm Djdpfju Icnrsx Agvoch plate thickness: 2,0 mm distance between columns: 3300 mm back gauge: 580 manuell mm cutting angle: Nein ° cutting gap adjustment: Nein mm down holder: 13 Stück Table dimensions: 3300 x 300 mm weight of the machine ca.: 3,0 t dimensions of machine: 3,7 x 1,5 x 1,8 m incl. 2x upper knife and 2x lower knife each 1500mm incl. table supports 1500 x 1500mm with roller elements 2x profile strips L: 1400mm 1x side stop bar 1600mm operation via control panel and/or foot pedal *

Condition: used, Straightening and welding plate cast steel gray cast iron heavily ribbed Length 2000 mm Width 1200 mm Thickness 150 mm Dcjdpfodzqq Ujx Agvsh Working height 800 mm Panel thickness 35 mm - Substructure made of solid wood Weight approx. 950 kg Good surface