Used Recoil Plate for sale (12,031)

Year of construction: 1980, condition: ready for operation (used), Guillotine shear by Eisen u. Hammerwerk G.m.b.H., capacity: 10mm, working length: 3000mm, year of manufacture: 1980. An inspection can be arranged by appointment. Dedpfx Asxt Rk Djc Neun

Year of construction: 1988, condition: ready for operation (used), A sheet filter (EK filter) Seitz Orion is available. Plate dimensions X/Y: 600mm/600mm, number of plates: 80, filter area: approx. 22m², filtration capacity: 45hl/h, connection: DN50. Machine dimensions X/Y/Z: approx. 3300mm/1000mm/1500mm, weight: approx. 1250kg. An on site inspection is possible. Dodexyzgijpfx Ac Njun

Year of construction: 2005, condition: ready for operation (used), Working length: 3050mm, max. material thickness: 16mm, cutting angle range: 0.5°-2.5°, cutting gap adjustment range: 0.05mm-1.2mm, stroke rate: 16/min, back gauge travel: 1000mm, oil quantity: 300l. Machine dimensions X/Y/Z: approx. 4200mm/4250mm/2050mm, weight: approx. 14000kg. Documentation available. On-site inspection is possible. Dusdpfox U Dw Nsx Ac Nsn

Condition: ready for operation (used), A high-performance crank plate shear with a low operating hours count is offered. Design: all-steel welded construction, stroke rate: 50 strokes/min, control FM 1S, backgauge manual or motorized (MAH 51/52), pneumatic hold-down device, rear safety light barrier. Inspection possible by arrangement. Dedpfx Aox Hfgvec Neun

Condition: ready for operation (used), Year of construction: 1980, Plate dimensions X/Y: 630mm/630mm, number of filter plates: 20, filter material: polypropylene, cake thickness: 25mm, max. filtration pressure: 12bar, filter area: approx. 12m², chamber volume: 160l. Machine dimensions X/Y/Z: approx. 2600mm/1200mm/1200mm, weight: approx. 1300kg. An on-site inspection is possible. Dujdpfx Aoyab Nrsc Nsn

Year of construction: 1960, condition: ready for operation (used), Throughput capacity: 9000l/h, heat recovery: 80%, operating temperature range: 5°C-71°C, max. operating pressure: 5bar, volume: 1/2: 97l/96l. On-site inspection is possible. Djdjyarp Aopfx Ac Noun

Year of construction: 2000, condition: ready for operation (used), A hydraulic guillotine shear Turi is available. Cutting length: 2500mm, max. material thickness: 4mm, backgauge: 600mm, stroke rate: 20/min. Machine dimensions X/Y/Z: approx. 3300mm/1500mm/1500mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible. Dsdpfx Aoyb Scxjc Njun

Year of construction: 1986, condition: ready for operation (used), A plate heat exchanger WMW is available. Heating medium: steam, cooling fluid: water, temperature range: 15°C-90°C, flow rate: 2000l/h, steam quantity: 300kg/h, weight: approx. 355kg. An on-site inspection is possible. Dujdpfx Asx Syv Noc Non

Year of construction: 2001, condition: ready for operation (used), Working length: 2040mm, max. cutting capacity: 3mm, stroke rate: 30strokes/min, table height: approx. 850mm, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 2400mm/2000mm/1450mm, weight: approx. 1500kg. An on site inspection is possible. Dodpfx Ajx Hz Nyec Njun

Condition: used, empty load weight: 469 kg, Year of construction: 2020, Year of manufacture: 2020. Engine: Hatz 1D81Z Diesel Plate width: 70 cm Duedpeyh Rzwefx Ac Njn Impact force: 65 kN Electric start Forward/Reverse Price: €2,950 excl. VAT

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 2roll 1250x3 mm total bend, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: siemens, controller model: simatic hmi, number of rollers: 2, roller (bottom) diameter: 350 mm, roller (top) diameter: 100 mm, roller length: 1,250 mm, working width: 1,250 mm, roller height adjustment: 30 mm, working height: 700 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, overall weight: 2,800 kg, total length: 3,500 mm, total width: 1,000 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: centralized greasing system, documentation/manual, emergency stop, Plate bending machine 2-roll pinch total bend in one-turn. Make Faccin model HCU 1250 x 3 mm year 2009 Plate sheet max width 1200 mm Plate thickness up to 3 mm Machine fully hydraulic operated Hydraulic power unit with 5,5 kw electric motor Top roll size 100 mm Lower pinch roll size 350 mm urethane rubber coated Automatic rolling sequence programmable Vertical support hydraulic adjustable to the diameter to hold in place the round formed plate. Set of mandrel tubes interchangeable slip-on to change the rolling diameter Console electric commands for manual use and automatic programmable bending cycle Safety and emergency stop system installed Manuals and schematics with the machine Dujdpfxjygxm Us Ac Non

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 4roll 2600x16 mm, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: parmigiani, controller model: 4axis nc programmable, number of rollers: 4, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 220 mm, roller length: 2,600 mm, working width: 2,500 mm, roller height adjustment: 45 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 16 mm, overall weight: 7,500 kg, total length: 4,450 mm, total width: 1,330 mm, total height: 1,400 mm, power: 18 kW (24.47 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: centralized greasing system, cone bending device, emergency stop, hardened rollers, 4roll hydraulic plate bending machine Parmigiani VBH 2500 X 16_12 mm Used ( year 2009 ) , in optimal working condition Capacity plate width 2500 mm Plate thickness 16 mm Prebend 12 mm rated on plate yield 260 MPa min rolling dia. ID 330 mm -- Upper roll 290 mm Pinch roll 270 mm Surface useful on rolls 2600 mm Power supply 380/50 Electric motor 18 Kw on hydraulic unit Configuration Hardened rolls very high surface resistance Conical bending attachment Digital position readout of the 4 rollers Duedpfx Aoygxldoc Njn NC programmable automatic plate roll Hydraulic driven two central rollers Hydraulic motion of side rollers individual in guideways dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells Safety and emergency installed Manuals and schematics with the machine weight 7500 Kg layout mm 4450X1330 X H1400 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 09233-K06P27, working width: 3,100 mm, stroke rate (max.): 10 1/min, sheet thickness (max.): 16 mm, distance between stands: 3,400 mm, working height: 900 mm, TECHNICAL DETAILS Sheet width: 3,100 mm Sheet thickness: 16 mm Frame gap: 3,400 mm Shearing angle: 2.5° Working height: 900 mm Backgauge: 1,000 mm Hold-downs: 14 units Strokes per minute: 10 MACHINE DETAILS Control: CYBELEC CybTouch 6 Duedpfx Asygw Epec Njn Total power requirement: 30 kW Dimensions & Weight Space required: approx. 4,150 x 2,360 x 2,450 mm Machine weight: approx. 16,400 kg Oil capacity: 500 l EQUIPMENT Electric backgauge 1,000 mm Electric cutting gap adjustment Electric cutting angle adjustment Cutting length limitation Light barrier at rear of machine Finger guard at front Ball rollers in support table 1x side stop 2x front support arms Foot switch

Condition: excellent (used), Year of construction: 1990, overall weight: 17,500 kg, total height: 500 mm, total length: 6,000 mm, total width: 3,000 mm, plate width: 3,000 mm, Floorplate Length:6000mm Floorplate Width:3000mm Length: 6000mm Width: 3000mm Height: 500mm Duedpfx Aoygwa Toc Non Weight: 17500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2011, control type: NC control, number of rollers: 4, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller length: 3,100 mm, working width: 8 mm, sheet thickness (max.): 8 mm, overall weight: 8,200 kg, total length: 6,200 mm, total width: 1,800 mm, total height: 3,900 mm, power: 8 kW (10.88 HP), Rolling width: 3100mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending: 8mm Top Roll Ø: 290mm Bottom Roll Ø: 270mm Side roll Ø: 250mm Number of rolls: 4 Rolling speed: 1 - 5 Top support: yes Power: 8kW Length: 6200mm Dodeygvwdjpfx Ac Nsun Width: 1800mm Height: 3900mm Weight: 8200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 101536, Offered for sale is a hydraulic guillotine shear Manufacturer: Eisen und Hammerschmidt GmbH Model: TSS4-20 Year of manufacture: 1987 Serial No.: 101536 Capacity: 4 mm Working width: 2,000 mm Control: ELGO Type P8511 Light curtain system by SICK Used, fully functional condition. Collection by purchaser; assistance with dismantling/transport can be arranged if required. Djdjx Da D Uopfx Ac Noun — If you are interested or have any questions, please feel free to send me a message. Viewing on site by appointment possible. Further metalworking machinery such as bench drills, press brakes, column drilling machines, eccentric presses, heavy-duty racking, welding tables, MIG welders, compressors, etc. – please take a look at my other listings. Location for viewing and collection: 12277 Berlin Domestic price net plus VAT or Net export price Collection only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is subject to change without notice. Errors and prior sale reserved. For further questions, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. For an extra fee, we can transfer the vehicles to the port.

Condition: good (used), Year of construction: 1982, Cutting length 4.300 mm Cutting height 1.800 mm machine weight ab. ca. 600 kg kg Dusdpfsygm Tiex Ac Nen

Condition: used, Hydraulische 4 Plattenspresse - Hydraulic 4 Plates Press Lechner IV B Baujahr / Year 1976 - Serial-No. 1214 4 Pressplatten  / Size with 4 pressure plates Pressfläche / Press size: 1 Pressplatte / 1 Press Plate 440 x 280mm - 2 Pressplatten / 2 Press plates 610 x 440mm Pressdruck regulierbar / Pressure adjustable max. 6000KG Platzbedarf  (Höhe-Breite-Tiefe) / Place require 140 x 155 x 51cm Gewicht / weight 780kg Elektr. Antrieb / eletric power 400 Volt, 3 Ph, 50 Hz., 1,1 kW Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Dsdpowhgaajfx Ac Njun On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Druckpalttenstanze  - Plate Punch Bacher 2048 Palttenstanze / Plate Punch Bacher 2048 Serial-No. 277 Druckplattenstanze für Heidelberg SM74, SORM Plate Punch for Heidelberg SM74, SORM Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Duodpfxjxg D Dwo Ac Nsn On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Druckplattenbelichter - Plate Exposer O.M.S. COPYSTAR 4050 Serial-No. 93-2023 Format / Size max. 400 x 500mm Voltage 230V AC - 2800W Duodpfx Asv Am Rvoc Nsn Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, machine/vehicle number: 16072, Fotodirekte Offset-Druckplattenkamera - Plate Exposer Heidelberg QUICKPLATER 40 Foliendicke / Foil thickness 0,1 - 0,2 mm Folienstanzfunktion (nur Langformat) / Foil Punch System (only lengthways format): Heidelberg Quickmaster 46, d. h. zwei U-förmige Löcher mit einem Abstand von 220 mm symmetrisch zur Mitte der Folienvorderkante Folienformate / Foil Size: Querformat / landscape format max. 404 x 510mm Langformat / Long Size: max. 350 x 510mm Querformat / landscape format min. 222 x 250mm Dsdpfxsh Axk Is Ac Nsun Vorlagenformat / Template format max. Bei Verkleinerung auf / when reduced to 70,7 %: 440 x 614mm Bei Verkleinerung auf / when reduced to 64 %: 448 x 575mm Motivformat auf der Folie / Motiv format on Foil max.: 1:1 Querformat / landscape format: 350 x 505mm 1:1, gestanztes Langformat / punchd long size: 350 x 480mm 1:1, ungestanztes Langformat / not punch long size: 350 x 469mm 70,7 %, Lang/Querformat / Long/landscape format: 311 x 434mm 64 %, Lang/Querformat: Long/landscape format:287 x 370mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1999, Druckplatten - Entwicklungsmaschine / Plate Processor AZ FEYear 1999 - Serial-No. XX158 Working width max. 300mm Online-Video-Inspection by Skype-Video Duodpeh Ax R Usfx Ac Njn We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2002, machine/vehicle number: 98, Heizplatte / Heating Plate Busse HPT 900W Serial-No. 98 822 Heiztemperatur einstellbar / Heating temperature adjustable Arbeitsfläche / Working area max. 350 x 650mm 5 Trockenklammern / 5 Drying clamps Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Djdpfx Aceupy S Ns Nsun On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1965, Technical details: Dodpfou Icppex Ac Noun sheet width: 1200 mm plate thickness: 1,0 mm throat of pillar: 1200 mm number of cutting strokes max.: 45 p.Min. throat max.: 300 mm cutting gap adjustment: nein down holder: 5 Stück back gauge: ca. 500 manuell mm total power requirement: 2,2 kW weight of the machine ca.: 1,6 t dimension machine xH: 1,6 x 1,6 x 1,9 m further features: -with shear angle adjustment -operation via foot switch -voltage 380 V *

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Dujdpfsvc Amtox Ac Njn Drain with rollers for clippings 2x protective grid *