Used Ravaglioli Kpn 305 for sale (1,676)

Condition: used, Year of construction: 2021, Automatic Saw-Milling Machine Langzauner LZ5-2A 3050 The machine is designed for cutting and levelling veneer, wood boards, chipboard, MDF, or fine-structured wood-based panels. Technical data: - cutting length: 3050 mm - cutting height: 40 mm - saw blade diameter: 180 mm - main motor: 2.2 kW - max. feed speed: 25 m/min - stepless feed adjustment - rear table - rear stop - total connected load: 4.2 kW Lhedsxfidyopfx Ab Uon - machine weight without table: 850 kg - required space: 5500x700x1700 mm Condition: used, requires technical inspection

Condition: good (used), functionality: fully functional, Year of construction: 1992, Pressure: 200 t Bending length: 3050 mm Distance between uprights: 2550 mm Ram stroke: 274 mm Lodpfx Aoxb Sugjb Uohn Control: Cybelec ModEva Pac Approx. machine weight: 17,000 kg Accessories/Equipment: - Control conversion to Cybelec ModEva Pac - 2 bending aids in front of the machine - Fiessler light curtain in front of the machine - Foot switch

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 550 mm, roller (top) diameter: 550 mm, side roll diameter: 450 mm, roller length: 3,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, power: 70 kW (95.17 HP), warranty duration: 12 months, Equipment: emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT Lhsdpoxbzptsfx Ab Uon * The bottom and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overloading * The top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * Easy roll position reading via three digital indicators * Easy removal of bent parts thanks to hydraulically opening head and automatically lifting shaft * Very user-friendly operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support when bending large diameters * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Condition: new, functionality: fully functional, overall weight: 2,000 kg, empty load weight: 690 kg, maximum load weight: 1,310 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,550 mm, loading space height: 300 mm, suspension: other, Year of construction: 2025, machine/vehicle number: 12312572, Loading dimensions approx. 1550 mm x 3050 mm External dimensions approx. 1670 mm x 4410 mm Permissible total weight: 2000 kg Payload: approx. 1340 kg (payload may vary depending on additional equipment) Manufacturer: Debon Features - Rear tipper "PW1.2 LUX" - Electric hydraulic pump (battery powered) - Charging contacts integrated in the frame profile (12V / suitable for chargers) - 6 lashing eyes on the loading floor - H-frame (installed / removable) - 300 mm aluminium side wall extension (foldable / removable) - 300 mm aluminium side walls (foldable / removable) - Vehicle documents included Additional equipment - Base plate: galvanized steel sheet on phenolic plywood Lhjdpfx Asi R Hwmeb Uen - Wheel chocks + holders Chassis - Axle and drawbar completely hot-dip galvanized | Rubber suspension axle | V-drawbar with ball-type coupling | Automatic heavy-duty jockey wheel Electrics - 12 Volt | 13-pin plug | Fog lamp | Clearance lights If you wish to purchase this trailer or have further questions about trailers, please use our internal tipper trailer number "12312572".

Condition: excellent (used), Vötsch Type: VT 3050-M Vötsch Subassembly Test Chamber Lifetimetester, Air-cooled Vötsch VT 3050-M Temperature Test Chamber / Climatic Chamber 500 Liters For sale is a used Vötsch VT 3050-M temperature test chamber (500 L internal volume). It is ideally suited for temperature tests in research, development, industry, or quality assurance. Features: - Durable stainless steel interior - 1 shelf included - Cable port (Ø 80 mm) - Interior lighting - Mobile on casters - Safety functions (thermal limiter, etc.) Technical data: Manufacturer: Vötsch Model: VT 3050-M Internal volume: 500 L Temperature range: –30 °C to +100 °C Internal dimensions (W × D × H): approx. 710 × 590 × 1250 mm External dimensions (W × D × H): approx. 940 × 1030 × 1955 mm Lhjdpfx Abexbrffo Uon Heating/cooling rates: approx. 2 K/min (heating), 1.4 K/min (cooling) Max. heat compensation: 650 W Control: modern touchscreen panel (multi-language), Ethernet port Power supply: 1/N/PE AC 230V+10% 50Hz Rated power: 2 kW Rated current: 12 A Refrigerant: R-404A Weight: approx. 350 kg Important buyer information for your safety: The following procedures are carried out on all chambers offered by us prior to sale: 1. Functional inspection and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, a documented trial run of the chambers is performed. Condition: used Scope of delivery: (see picture) (Specifications may be subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: new, Year of construction: 2012, Hydraulic station unit from the renowned Rexroth brand. The unit has never been used and is in perfect condition. It is ready for immediate industrial implementation. Technical Specifications and Features: Manufacturer: Rexroth Year of Production: 2012 Model: ABRPT-00630540 Motor: ABB Motors: Model: QA200L4A Power: 30 kW Speed: 1475 RPM Voltage: 690V/400V Weight: 256 kg Hydraulic Pump: Rexroth A10VSO 71 DFR1/31R-PPA12N00: Controller: Hydac ETS 1700 Lsdpfx Asu Td D Njb Uehn Please include your price offers directly when reaching out to us.

Condition: ready for operation (used), Year of construction: 2008, Technical data: Product number: RA 0305 D Year of manufacture: 2008 Motor power: 7.5 kW Lhjdpfjxdvpyjx Ab Ujn Capacity: 300 m³/h Max vacuum: 0.4 mbar Noise level: 74 dB Rotational speed: 1,500 rpm Weight: 250 kg Dimensions [H x L x W]: 1011 x 581 x 410 mm The pump achieves a vacuum of 0.4 mbar, as confirmed by the measurement on the sensor shown in the video below. The reading 4.3 -1 on the sensor display indicates a vacuum of 4.3 × 10⁻¹, which equals 0.43 mbar. After a complete overhaul The pump is in perfect condition. New oil New oil filter New exhaust separators Oil-lubricated vacuum pump, suction pump – a device used in engineering applications for extracting gases (creating negative pressure) in a sealed space. Pumps are categorized by their operating principle: positive displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ionic. The most important parameters of vacuum pumps are: • Final pressure (the lowest pressure attainable with the pump) • Pumping speed and the dependence of this speed on pressure • Throughput (typically measured in m³ of extracted gas per unit of time)

Year of construction: 2021, condition: as good as new (ex-display), Max. drilling diameter 50 mm Max. travel of spindle 315 mm Max. distance from spindle axis and column 1600 mm Min. distance from spindle axis and column 350 mm Max. distance from spindle nose to surface of base worktable 1220 mm Min. distance from spindle nose to surface of base worktable 320 mm Spindle taper MT 5# Spindle speed steps 16 step Lsdpfx Abjh H Edis Uehn Spindle speed range 25~2000 r.p.m. Spindle feed steps 16 step Spindle feed range 0.04~3.2 mm/r Dimension of worktable 500x630 mm Arm length 2140 mm Power of main motor 4 Kw Machine dimension 2500x1060x2655 mm Net. Weight 3.50 Ton

Condition: good (used), Year of construction: 2016, operating hours: 1,900 h, functionality: fully functional, machine/vehicle number: 037204, travel distance X-axis: 760 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, torque: 160 Nm, controller manufacturer: FANUC, controller model: 0iMF, workpiece diameter (max.): 600 mm, table load: 600 kg, rotary table diameter: 630 mm, spindle speed (max.): 15,000 rpm, number of spindles: 1, type of input current: three-phase, power: 30 kW (40.79 HP), Equipment: chip conveyor, documentation/manual, 5 axis milling machine. Ljdpfjr Nxh Ujx Ab Uehn 1800 hours. sk40

Condition: ready for operation (used), Siemens C79451-A3247-B71 power supply SN C3 056766, used, 100% functional Lhodpfx Aexahmvsb Uen

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes Lhedpfx Abjxacfgo Ujn * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: used, power: 159 kW (216.18 HP), fuel type: diesel, lifting height: 29,700 mm, Year of construction: 2008, operating hours: 8,474 h, Technical information Lhedswx D Naopfx Ab Uon Make of engine: Perkins Top speed: 40 km/h Empty weight: 23.000 kg Functional Lifting capacity: 5.000 kg Identification Serial number: 756947 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Michellin Transport dimensions (LxWxH): 7.8x2.5x3.2 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), Year of construction: 2003, cutting length (max.): 3,050 mm, very nice veneer saw with planing unit Ljdpfsxc Dk Ajx Ab Ujhn max. cutting length 3050 with rear stop and digital measurement display

Year of construction: 2009, condition: good (used), Russell Finex 30510 separator Serial: FS105 2009, stainless decks and meshs, three deck sieve, diameter of deck 1150mm, 3Ph Lhodpfx Abow U Dzge Uen

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 2000 mm Measurements depth 3500 mm Measurements height 2700 mm Lhedpjw Ul Emjfx Ab Uen Machine weight 9700 kg Control Unit Brand CYBELEC Model Cybelec control system Main Drive Spindle motor power 9 kW Pressing force 100 tons Stroke 100 mm Number of axis 4 This 4-axis Vimercati PHSI 100x3050 press brake was manufactured in 2005. It features a working width of 3050 mm, motor power of 9 kW, and a pressing force of 100 tons. The machine dimensions are 3500 x 2000 x 2700 mm, and it weighs 9700 kg. It includes a fully refurbished Cybelec control system. Consider the opportunity to buy this Vimercati PHSI 100x3050 press brake. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), Siemens 6FX1130-5BA00 Sinumerik PLC Software EPROM Module E Stand B used, 100% functional Ledpfx Aexagpveb Ujhn

Year of construction: 1990, condition: good (used), machine/vehicle number: 603, working width: 3050 mm metal sheet thickness: 6 mm rear stop: 650 mm power: 380 V, 16 kW space needed: 3680 x 2060 x 1870 mm Lhsdpfx Aodzrpwob Usn weight: 7580 kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15151, Working width: 330 mm Min./max. veneer thickness: 0,4-0,8 mm Voltage: 400/3/50 - 480/3/60 - finger form VARIO 3 - rewinder for roll with encoder - Winder Start-Stop by fotolights - electronic controlled by EATON PLC and touch panel - encoder for tape infeed - FESTO valve block with plc connection - automatic start with sensor - - transport speed up to 130m/min adjustable through inverter - new white/grey colour RDS 240 80 05 - Labeling, marks and panel language in English, manual in English - electric and pneumatic in english - perfect working requires flat veneers with parallel cut edges Technical Data with winder: min. veneer width: 80 mm max. veneeer width: 330 mm min. veneer length: 340 mm veneer thickness: 0,4 - 0,8 mm transport speed: 60 - 130 m/min winding core: Ø 200 mm max. winding: Ø 700 mm compressed air: 7 - 9 bar Lhjdsxclc Tspfx Ab Ujn air consumption: 60 - 100 NL/min power: 480(400)V 3Ph 60/50 connected load: 4 kW

Year of construction: 2008, condition: excellent (used), Technical data Manufacturer: METRIS/Coord3 Lhjdpjiy Rz Sjfx Ab Usn Type: KRONOS 30-50-13 Year of manufacture: 2008 Measuring plate width: 2225 mm Holes: 65mm Height- upper edge plate: 75cm Height plate: 50cm Height bottom - plate: 25cm The machine can be modernized with new accessories according to customer's requirements. Price: on request! Assembly and commissioning possible! We will be happy to provide you with a detailed offer. Note: Our offer is directed exclusively to professional customers. (Changes and errors in the technical data, specifications and prices and prices as well as subject to prior sale).

Condition: excellent (used), Vötsch Type: VT 3050 Modules / Test Chamber Temperature Chamber Air-cooled Test chamber capacity 500 litres Temperature range -30°C / +100°C Temporal temperature fluctuation K ±0.5 Spatial temperature fluctuation K ±1.5 Temperature gradient K 3 Change rate Heating K/min 2.0 Lhedpfsw S E N Tox Ab Usn Cooling K/min 1.4 Heat compensation max. W 650 Calibration values +23°C +80°C Test chamber dimensions Width 710 mm Depth 590 mm Height 1250 mm External dimensions Width 940 mm Depth 1030 mm Height 1955 mm Sound pressure level db(A)

Condition: used, Year of construction: 2016, Technical details: cutting diameter: 330 mm saw band length: 4680 mm sawing motor: 4 kW cutting speed: 15 - 100 m/min square: 330 x 500 mm cutting length min.: 10 mm cutting lenght max.: 850 (-9999) mm Ljdpfx Aevwcpkjb Ujhn total power requirement: 7,7 kW weight of the machine ca.: 5,5 t space requirements approx. LxWxH: 2,7 x 2,35 x 1,7 m Automatic horizontal bandsaw, hydraulic, material dimension max.: dia 330 mm, rectangular 330 mm x 500 mm, dimension of bandsaw 4680 x 34 x 1,1 mm, incl. roller track *

Condition: ready for operation (used), Siemens C79458-L2317-A1 Sicomp SN C3 051344, used, 100% functional Lhedoxahnaopfx Ab Uon

Year of construction: 1987, condition: used, machine/vehicle number: 687 T, working width: 3050 mm metal sheet thickness: 6 mm throat: 200 mm rear stop: 1000 mm Lhedpfx Abob N Erbs Ujn power: 15 kW space needed: 4100 x 2300 x 2100 mm weight: 8500 kg

Condition: ready for operation (used), Rexroth CSH01.1C-SE-ENS-EN2-NNN-S1-S-NN-FW MNR: R911305533, serial number CSH011-33334, used, minor signs of wear, 100% functional, scope of delivery as per photos Lhsdpei Ecq Nefx Ab Uen

Condition: good (used), Grinding wheel diameter: 300 mm Grinding wheel width: 50 mm Grinding wheel speed: 1400 rpm Grinding wheel drive: 380 V, 1.5 kW Space required: 1050 x 580 x 1200 mm Lodov D E Szopfx Ab Uohn Weight approx.: 140 kg