Used Kdr 310 St for sale (16,499)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WJME2NNH60C286475, mileage: 306,184 km, first registration: 05/2014, fuel type: diesel, overall weight: 26,000 kg, tire size: 385/65, axle configuration: 6x2, fuel: diesel, color: white, suspension: air, total length: 9,200 mm, total width: 2,550 mm, total height: 3,850 mm, loading space volume: 22 m³, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, cruise control, onboard computer, tachograph, The subject of this advertisement is an IVECO Stralis 310 garbage truck with a Stummer Super Titan body. First registration: 2014-05-28 Power: 310 hp Engine capacity: 8710 cm3 Fuel: Diesel Mileage: 306,184 km VIN: WJME2NNH60C286475 Number of axles: 3 Drive: 6×2 Tire size I, II, III: 385/65, 315/80, 385/65 Wheelbase I-II: 4.20 m Wheelbase II-III: 1.35 m Gearbox: automatic Suspension: air suspension GVWR: 26,000 kg Curb weight: 16,825 kg Length: 10.20 m Width: 2.55 m Height: 3.85 m Body: Model: SUMMER SUPER-TITAN 2014 Capacity: 22 m³ Equipment: ABS central locking electric windows electric mirrors hydraulic power steering engine brake hydraulics immobilizer on-board computer manual air conditioning dual wheels reversing camera sun visor speed limiter adjustable suspension factory radio toolbox reversing signal rotating lights tachograph cruise control multifunction steering wheel OUR SERVICES We provide: Preparation of documentation for registration and customs clearance (including EUR.1 and T1) Transport of the vehicle to any location worldwide Vehicle service after purchase Repairs and maintenance of equipment purchased from us Upon customer request: Oil and filter changes in the vehicle and body. *Comprehensive service and support at every stage of the process. *Possibility of leasing older vehicles, even those up to 18 years old. Bsdpfx Amszt N S Hjrewu *If you would like to know more, please contact us.

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Bsdpozy Imijfx Amrjwu Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, total width: 1,200 mm, total height: 2,100 mm, total length: 1,700 mm, overall weight: 310 kg, inner dimension width: 740 mm, inner dimension length: 1,000 mm, inner dimension height: 770 mm, Equipment: lighting, Auer ST 1000 J Blasting Cabinet / Blasting System – Year of Manufacture 2003 Technical Data: Manufacturer: Paul Auer GmbH Model: ST 1000 J Year of Manufacture: 2003 Machine Number: 3440 Blasting Chamber: approx. 1,000 × 770 × 740 mm External Dimensions: approx. 1,700 × 2,100 × 900 mm Load Capacity of Working Grate: 200 kg Blasting Gun: SPA 80 Air Nozzle: 4.0 mm Blasting Nozzle: 11.0 mm Compressed Air Consumption: approx. 0.73 m³/min at 4 bar Electrical Power: 1.0 kW Bsdpfxoz Drfuj Amrjwu Weight: approx. 310 kg

Year of construction: 2001, condition: ready for operation (used), Various lettershop and paper converting units are available. 1) MBO ET46 corner conveyor table, year of manufacture: 1991. 2) MBO ET46 corner conveyor table. 3) MBO Z2 knife folding unit. 4) Herzog + Heymann knife folding unit, year of manufacture: 2001. 5) MBO T45-2-X knife folding unit. 6) Böwe 310 Systec cutting module. 7) Nagel Citoborma 490 Vario SBT multi-spindle paper drilling machine. 8) Hunkeler paper unwind stand. 9) Herzog + Heymann shingle delivery, year of manufacture: 2001. 10) MBO FWIII 52/4 folding unit. 11) MBO T45-2-45/4 folding unit. 12) MBO FWIII 52/6 folding unit. 13) Hunkeler ARAW 50/20 paper unwind stand. 14) Böwe separating cutting module. 15) Herzog + Heymann 2-pocket folding unit, year of manufacture: 2006. 16) Herzog + Heymann 4-pocket folding unit, year of manufacture: 2001. An on-site inspection is possible. Bwsdpfoziphasx Amrju

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, REX BIGMASTER Planer A+D+FR+FL+AFV+NSH+HFRo+HFRu 6 spindles + 2 chamfering units. Spindle arrangement: U-O-L-R-O-U Bsdjzrtpmspfx Amrjwu Feed rate controlled by frequency inverter up to 80 m/min. Planing width 310 mm. Planing height 205 / 300. Positioning control. Electrical control cabinet with control unit and power supply. Control panel. Soundproof cabin. 2 sets of tools. Technical documentation.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, REX BIGMASTER Planer A+D+FR+FL+AFV+NSH+HFRo+HFRu 6 spindles + 2 chamfering units. Spindle arrangement: U-O-L-R-O-U Feed rate controlled by frequency inverter up to 80 m/min. Planing width 310 mm. Planing height 205 / 300. Positioning control. Electrical control cabinet with control unit and power supply. Control panel. Bsdpszrtn Njfx Amrewu Soundproof cabin. 2 sets of tools. Technical documentation.

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 450 mm, overall weight: 3,950 kg, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2006. This DMG GILDEMEISTER CTX 310 features a maximum spindle speed of 6000 rpm and a tool turret with 12 stations. With a power capacity of 24 kVA, this machine is designed for efficient performance. If you are looking to get high-quality turning capabilities, consider the DMG GILDEMEISTER CTX 310 machine we have for sale. Contact us for further details. - Total Power On Hours (Counter 1): 21887.4 h- Spindle/Run Hours (Counter 2): 11066.2 h- Power Capacity: 24 kVA- Max Current: 35 A (Jn max) / 38 A- Voltage: 400 V- Frequency: 50/60 Hz- Control Voltage: 24 V Technical Specification Bwodpfx Amozh E Aksrou Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 7363-0044, Plastic injection moulding machine | Sumitomo SHI DEMAG - Systec 100/420-310 (1000-310) Clamping force [kN]: 1,000 Number of injection units: 1 Clamping platen width [mm]: 600 Clamping platen height [mm]: 600 Tie bar spacing horizontal [mm]: 420 Tie bar spacing vertical [mm]: 420 Locating ring diameter [mm]: 125 Minimum mould height [mm]: 250 Bjdpfx Amsygiaferewu Maximum mould height [mm]: 500 Maximum daylight [mm]: 500 Maximum ejector stroke [mm]: 150 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 149 Aggregate configuration: EE1: horizontal Equipment: 1 core pull, stacking station, with robot Inspection possible at any time by arrangement. Free loaded onto truck (Butzbach). #Tags: Sumitomodemag | Systec400 | 100-420-310

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Bedpfx Ameyg Eu Sorewu Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: used, AD thickness planer KDR STÖ310, year 1994, incl. transport unit, 2.2 kW, 1270 mm table length, 310 mm table width, 3 knives, 250 kg Bodpfx Amsx H Uddorswu Price changes reserved, subject to errors, misprints and typographical mistakes.

Condition: excellent (used), I am offering for sale a professional laboratory power supply, the BEHA NG 310 P10 (UNIWATT), designed for service, laboratory, educational applications, and testing electronic devices. The device has been inspected and is in perfect working order. It features two independently adjustable 0–30 V / 3 A outputs and an additional stabilized 5 V / 3 A DC output. The power supply has digital displays and the ability to measure voltage and current. The housing shows normal signs of use, as seen in the pictures. It is sold in the exact condition as shown in the photographs. Technical data: Bjdpfx Aezrttfomrowu • Manufacturer: CH. BEHA GmbH • Model: NG 310 P10 • Supply voltage: 230 V AC, 50/60 Hz • Current consumption: 2.2 A • Outputs: 2 × 0–30 V DC / 3 A 5 V DC / 3 A • Measurement input: 0–100 V DC • Digital voltage and current indicators • Catalog number: FW031003300D • Country of origin: Germany Condition: • Used • Inspected – fully functional • Normal signs of use • Sold as shown in the pictures A robust, high-quality laboratory power supply from the renowned German company BEHA, ideal for electronic service centers, workshops, laboratories, schools, and research and development work. Thanks to its two independent adjustable channels and an additional 5 V output, it is perfect for testing, powering, and starting electronic circuits.

Condition: excellent (used), Manufacturer: Indramat spindle motor with Emag spindle Type: 1MB 310 D-6DB-A094A1/SO20 Rotor: 1MR 310 D-A094/SO20 Stator: 1MS 310 D-6B-A1/SO20 Pn 19 kW P kb 27 kW n N 700 rpm n max 6000 rpm Condition: Used, fully functional 2 units available in stock. Bjdpev U Ag Defx Amrjwu

Condition: used, machine/vehicle number: 007981, Type of edging: Thin edge, Thick edge, Solid wood Bjdpozz Ipmofx Amrowu Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2016, operating hours: 2,170 h, functionality: fully functional, input voltage: 400 V, total width: 3,880 mm, total length: 3,100 mm, input current: 160 A, Equipment: documentation/manual, MGM Omnicut Star 3100 CNC plasma cutting system Bjdpszpwcfefx Amrjwu Manufacturer: MGM Model: Omnicut Star 3100 Year of manufacture: 2016 Operating hours: approx. 2,100 h For sale is a well-maintained MGM Omnicut Star 3100 CNC plasma cutting system from 2016 with only approximately 2,100 operating hours. The machine is in good technical condition and is ready for immediate use. Equipment: CNC plasma cutting system MGM Omnicut Star 3100 Year of manufacture 2016 Approx. 2,100 operating hours Plasma source: Kjellberg HiFocus 161i neo Additional oxy-fuel torch for economical oxy-fuel cutting Precise machining of steel, stainless steel and aluminum Robust machine construction for industrial use The combination of the powerful Kjellberg HiFocus 161i neo and the oxy-fuel torch enables both highly precise plasma cuts and the economical cutting of larger material thicknesses. Note regarding the sale: We offer this machine on behalf of a client and act solely as an intermediary. The sale is made directly by the machine's owner. We will gladly facilitate contact and assist you with the entire process. An inspection of the machine is possible at any time by prior appointment. We will gladly provide further technical data, images and information on the equipment upon request. We look forward to your inquiry.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 07-02461, measuring range X-axis: 250 mm, measuring range Z-axis: 310 mm, total width: 390 mm, total length: 430 mm, total height: 805 mm, input voltage: 230 V, overall weight: 80 kg, input frequency: 50 Hz, For sale is a tool presetting machine from the Swiss quality brand PWB Swiss. The machine is in used condition, but the optics and measuring electronics are functional. Extensive VDI accessory package included: Bjdpfezy Uqhjx Amrewu The machine is sold with a used set of reduction adapters (ideal for CNC turning operations): 1x VDI 30 holder 2x VDI 20 holder (in two different heights) 1x VDI 16 holder Technical data: Measuring range X-axis (longitudinal travel): 250 mm Measuring range Z-axis (vertical travel): 310 mm Base spindle mount: SK 40 Weight: approx. 80 kg Important notes regarding the sale: A test report or printed manual is no longer available. The machine is sold in its current condition, as viewed (uncleaned). An on-site inspection while the machine is powered on is highly recommended. Sales conditions: Price: €1,850 (negotiable, plus VAT) Invoice: A proper invoice with VAT will be issued. Shipping: Self-collection only. Assistance can be provided with loading.

Condition: new, DEMAG rope pulleys / rollers - 19 pieces: 6 pieces diameter 180 mm. / inside 40 mm. Bwjdpfsu U Rayex Amrou 2 pieces - 260 mm. / 45 mm. 6 pieces - 260 mm. / 90 mm. 1 piece - 310 mm. / 90 mm. 4 pieces - 410 mm. / 90 mm.

Condition: used, Year of construction: 2017, power: 20 kW (27.19 HP), edge thickness (max.): 12 mm, feed rate X-axis: 20 m/min, The machine has the following configuration: Pre-milling unit End-capping unit Number of motors in end-capping unit: 2 Rough milling unit, top and bottom Number of motors in rough milling unit: 2 Edge rounding unit Number of motors in edge rounding unit: 2 Edge trimming unit Glue application unit Edge finishing unit Number of motors in edge finishing unit: 2 TECHNICAL DETAILS Workpiece processing Min. board thickness: 8 mm Max. board thickness: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 20 m/min MACHINE DETAILS Total connected load: 20 kW EQUIPMENT Preheating lamps for workpiece sides Edge roller magazine Bedpfjzmtldsx Amrewu Glue reservoir for EVA hot melt adhesive Spray unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7981

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 7771, functionality: fully functional, pressing force: 100 t, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table height: 900 mm, throat depth: 1,000 mm, total width: 3,100 mm, overall weight: 8,900 kg, travel distance X-axis: 1,000 mm, controller model: EC20 - graficzne 2D, working width: 3,000 mm, bending force (max.): 100 t, back gauge: 1,000 mm, back gauge speed R-axis: 250 mm/s, back gauge travel distance R-axis: 200 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 3,000 mm, control type: CNC control, degree of automation: semi-automatic, back gauge adjustment: CNC-controlled, number of axes: 4, actuation type: electric, Equipment: CE marking, emergency stop, european tool clamping system, safety light barrier, Servo-electric press brake SAFANDARLEY type E-Brake 100-3100 NS (100T - 3060 mm) AMADA tooling system Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - Press force: 100 T - Bending length: 3060 mm - Stroke: 300 mm - CNC control in axes Y1 / Y2 / X / R / Z1 / Z2 Bwsdpfx Amjylt Uksrou - CNC-controlled backgauge with 4 axes - X / R / Z1 / Z2 - 2D graphical control - EC20 model - Programmable light curtain - AMADA tooling system - WILA tooling system - lower clamp compatible with 4V / 2V / 1V / T-type dies, 60 mm base - Lower table crowning compensation

Condition: refurbished (used), Year of construction: 2014, operating hours: 6,185 h, load capacity: 1,000 kg, fuel type: electric, mast type: simplex, construction height: 1,400 mm, Mast data Bedpjy Rnbqefx Amrswu

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,045 h, functionality: fully functional, machine/vehicle number: 3116946, turning diameter over cross slide: 279 mm, turning length: 406 mm, turning diameter: 279 mm, spindle bore: 64 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 406 mm, spindle motor power: 15 W, rotational speed (min.): 4,000 rpm, rotational speed (max.): 6,000 rpm, total height: 2,167 mm, total length: 3,395 mm, total width: 1,612 mm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 30 m/min, workpiece weight (max.): 3,583 kg, type of input current: three-phase, overall weight: 3,583 kg, spindle nose: -, Equipment: documentation/manual, Used turning center for sale – CNC lathe with Y-axis and driven tools, in very good condition. Contact us for further details. Model: HAAS ST-15Y Year of manufacture: 2019 Maximum turning diameter: 305 mm Reblezr E H Djvzwyrecf Maximum turning length: 406 mm Y-axis travel: 102 mm Bar capacity: 64 mm Chuck size: 8 inches Maximum spindle speed: 4000 rpm Number of controlled axes: 4 Spindle motor power: 14.9 kW Tool size: BOT 6/12 VDI40 Bodjzr E H Dopfx Amrjwu Controls: HAAS 2019 Voltage: 440V AC Weight: 3583 kg Dimensions (L x W x H): 3030 x 1550 x 1810 mm Additional Equipment: VPS Programming System, Hydraulic Tailstock, HAAS Auto-door, Chip conveyor, 6000 rpm Live Tools Resale capability included. The center is in very good condition. It is currently in continuous operation and connected to power. The machine operated in one shift.

Condition: excellent (used), mileage: 932,527 km, power: 228 kW (309.99 HP), first registration: 05/2012, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,200 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 10,300 mm, total width: 2,600 mm, Year of construction: 2012, WJME2NNH404393034 Cool unit brand: Carrier = More information = Technical information Number of cylinders: 6 Engine capacity: 7.790 cc Rear axle 1: Lift axle Weights Empty weight: 11.820 kg Carrying capacity: 15.180 kg GVW: 27.000 kg Functional Cooling engine: diesel and electric Condition Technical condition: very good Visual appearance: very good Identification Registration number: BZ-XL-87 = Dealer information = Bwjdeymqggopfx Amrju Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, functionality: fully functional, Year of construction: 2013, degree of automation: semi-automatic, actuation type: electric, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 20 mm, back gauge: 1,000 mm, input current: 60 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: angle stop, documentation/manual, emergency stop, foot remote control, We are offering this used Schechtl MBM 310/ECT pivoting bending machine, manufactured in 2013. Year of manufacture: 2013 Model: MBM 310/ECT Serial number: MA6239 Capacity: 1.00 mm Three-phase frequency: 50 Hz Machine rated current: 60 A Wiring diagram number: 300.000 Bwodpfozrabiox Amrsu Order number: 20.013 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a 3+2-axis CNC machining center, type Deckel Maho DMU50M. The Heidenhain TNC310 contouring control (also available with Siemens 810D!) makes the DMU a fully-fledged CNC machine for both production and training applications. Due to the absence of a tool changer and the conveniently positioned maintenance doors, the DMU50M requires very little space and can be positioned almost directly against a wall. The machine has been thoroughly tested in our workshop, is therefore in excellent condition, and is ready for immediate use. We look forward to receiving your inquiry! Delivery time: immediately available Machine no. xxxx Year of manufacture: 2002 Control: Heidenhain TNC310 or Siemens 810D (including Shopmill) Table design: Rotary and tilting table Speed: 20-4500 rpm, continuously programmable Feed rate: 0-5000 mm/min, continuously programmable Travel ranges X/Y/Z: 500/400/400 mm Tool holder: SK40 Tightening system: pneumatic Handwheels: 3-axis electronic / B+C axes mechanical Weight: approx. 2800 kg Bsdpfjv Sy Sfsx Amrowu Further equipment and accessories: upon request Our service promise to you: - We are a certified master machine shop - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the selected machine - About the paint color of the selected machine You can decide freely. - If you wish, you can order additional accessories such as tools, etc. directly. - If you wish, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, For sale: a professional, automatic multi-blade saw, WEINIG RAIMANN VarioRip 310, designed for precise and efficient longitudinal cutting of solid wood. The machine was ordered in 2021 from WEINIG Vertrieb und Service GmbH & Co. KG. It is an industrial-grade machine from the renowned WEINIG / RAIMANN brand, designed for intensive production use. Machine number: 2108.20. Key parameters: Main motor: 30 kW / 40 HP Saw arbur diameter: Ø 65 mm Arbor speed: 4200 rpm Blade diameter: 300–350 mm Continuously adjustable feed rate: 5–35 m/min Width of the conveyor chain: 340 mm Max. total infeed width: 650 mm Min. cutting height: 15 mm Power supply: 400 V / 50 Hz 3.5" color touchscreen CE compliant The machine is equipped with a hydraulic Quickfix rapid blade clamping system and 4 Quickfix collars for mounting 4 blades. Additional equipment includes a laser pointer indicating the cutting position, facilitating accurate material alignment. Bwodjz Eghmspfx Amrou Precise material transport The VarioRip 310 features a robust, prismatically guided conveyor chain with a width of 340 mm. The system ensures accurate material guidance and high stability during cutting. The machine has automatic chain lubrication and oil level control. The chain is equipped with steel spike elements, which improve the guidance of warped, distorted, and short pieces of wood. Safety and equipment The machine has the RAIMANN SafetyPlus system, anti-kickback and anti-splinter guards, a Kevlar curtain, a locking guard, and emergency stop switches. The control panel displays, among other things, the machine load, power consumption, operating hours, and error messages. Dimensions: approx. 1700 × 1800 × 1500 mm Weight: approx. 1900 kg Working height: 850 mm The machine is ideal for companies involved in the serial cutting of wood, the production of moldings, furniture components, joinery, and other solid wood components. Price: 48,000 EUR net

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, ENGEL eMotion 160 from a cleanroom injection molding facility, with only 11,300 operating hours, in near-new condition. The machine was used for the production of 64-cavity pipette molds at NYPRO (Jabil) in Knittlingen and is in near-new condition. It is the last available unit from an original total of 90 machines. It was originally intended for another NYPRO plant but, as part of the site relocation, has now been released for sale. The order confirmation from ENGEL to NYPRO can be found in the documents. The original new price was approximately €330,000, including the crane. Please note: Items 10.0064 to 10.0070 (eFlomo) are not included in the scope of supply! This was not implemented. Everything else as per the order confirmation is fully installed in the machine. I can provide you with the technical data upon request. Included in the price: dismantling the crane and packing it onto two Europallets. Also, removing the machine from the cleanroom and loading it onto your truck using a 15-ton forklift. Bsdpfswb Dl Tex Amrjwu If you are interested or have any questions, please do not hesitate to contact me. The machine is located at the Nypro facility near Karlsruhe and can be inspected there. Delivery is possible within a few days. Below, in the documents, you will find the order confirmation from ENGEL to Nypro!