Used Ras Multibend Center for sale (69)

Condition: good (used), You are bidding on: a high-quality shear from a renowned manufacturer – RAS – and a press brake from Schechtl. Device features: Sheet metal shear Cuts sheet metal up to 1.5 mm thick (steel, aluminum, and slightly more – see nameplate). Standard mechanical shears only manage 1.2 mm. Cutting length: slightly over 2 m With adjustable back gauge, 500 mm Front support Weight: see picture Press brake Schechtl KS Bending length: slightly over 2 m Sheet metal thickness: 1 mm, and aluminum, zinc, etc., slightly more Thin and wide front gauge Top tooling (additional tooling available as an option) More tools and machines available in our shop. You will receive an invoice in accordance with §25a UStG (German VAT Act); the invoice amount includes VAT. Subject to differential taxation. Free loading possible – total weight approximately 1.6 tons. Inspection and testing are possible – and encouraged – after scheduling an appointment by phone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Lhedpjy Taf Tofx Aiish Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approximately 3 minutes from the A3 and A81 motorways. Item number: Shear RAS 260502, Press Brake 260501.

Condition: used, sheet width 3100 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 36 Hub/min cutting angle 0.9 Grad table height 800 mm table width 430 mm distance between columns 3200 mm back stop - adjustable 5.0 - 750 mm engine output 3.0 kW weight of the machine ca. 1950 kg range L-W-H 3730 x 2070 x 1400 mm Features: - Robust / motorized swing-cut guillotine shears - Machine with manual material/backgauge * Travel range 5.0 – 750 mm stop depth * Analog position display * Manual adjustment from the front - Break-proof, torsion-free steel welded construction - Compact and clear machine design - 1x hold-down beam * Hold-down opens before the knife beam moves up * No kinking of very sensitive sheets - Manual cutting gap adjustment - Integrated sheet metal holding system for thin sheet metal cuts - Sheet metal/cut material removal at the front (operator side) - 1x side stop with mm scale - 3x table extensions - 1x freely movable foot switch Lsdey I Da Djpfx Aiiehh

Condition: used, Year of construction: 2002, Bending machine RAS 73.30 Flexibend – Good condition, with segmental tools For sale is a good condition bending machine RAS 73.30 Flexibend, manufactured in 2002. Equipped with segmental tools, which are attached to the upper bending beam with a quick coupling. The machine is connected, it can be tested on site. Specification: Manufacturer: RAS Model: 73.30 Flexibend Year of manufacture: 2002 Working length: 3200 mm Max. bending thickness: 3.0 mm Upper beam opening height: 300 mm Motor power: 4.5 kW Dimensions (L × W × H): 4300 × 2300 × 1750 mm Weight: ~4.4 t Equipment and functions: Control system: FlexiBend 6000 with touch screen – Recently updated by the manufacturer, with a new monitor CNC controlled backgauge: 10–1500 mm Automatic bending beam adjustment Adjustable bending speed Crowning compensation system (Crowning system) Two control pedals Tool storage trolley Tools: Segmented upper tools, height – 150 mm Segmented bending beam tools: – 20 mm (for sheets up to 2.5 mm thick) – 12 mm (for sheets up to 1.5 mm thickness) Lhsdpfx Aowmk Ewjiioh If you have any additional questions – please contact us, we will be happy to answer.

Condition: used, Year of construction: 2001, Electric guillotine R.A.S with mechanical rear support, fully operational, available for testing. Specification: Model: R.A.S 52.30 Year: 2001 Manufactured in: Germany Working length: 3 100 mm Shearing thickness max: 2.0 mm Lhedpjttv Ecjfx Aiijh Rear support: mechanical 770 mm Weight: 1950 kg Other: forward sheet metal drop. If you have any further questions, we will be happy to answer them.

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! . Equipment: Left side gauge, 750 mm Cutting gap adjustment Lhjdpfx Aioy Rf T Rsioh Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Condition: good (used), Year of construction: 1986, Max. working width: 4000 mm for sheets with tensile strength of 40 kg up to: 3 mm Ledpey A Eg Uefx Aiishh Table width: 470 mm Backgauge adjustment: 1000 mm Fixed cutting angle: 1°30' Frame throat depth: 200 mm Hydraulic drive: 380 V, 7.5 kW Required space: 4650 x 1830 x 1420 mm (height) Weight: 5.7 t

Condition: ready for operation (used), Year of construction: 2001, sheet width 3200 mm plate thickness 3.0 mm ST thickness at "Niro-steel" 2.0 mm Opening width / upper beam 300 mm speed OW 40.0 mm/sec Bending beam adjustment 80.0 mm work height max. 900 mm speed BW 90.0 Grad/sec control MULTIBEND 5000 back stop - adjustable 10 - 1550 mm accuracy +/- 0.1 mm air pressure 5.0 bar Number of working hours ca. 1.000 h voltage 400 V total power requirement 2x 4.0 kW weight 4400 kg range L-W-H 4295 x 2225 x 1775 mm New price approx. 85.000 euros Machine with only approx. 1.000 operating hours (!!) good condition (!!) Special price on request - in checked condition - machine video - ?v=VP6emx4HTYM ! Maximum flexibility when bending cassettes, boxes and profiles ! High flexibility in bending part design ! High productivity and throughput ! Easy to use Equipment: - motorized universal swivel bending machine "RAS 73.30" * high-precision mechanics with modern control technology * for individual and series production * robust high-speed machine with high axis speeds * torsion-free welded construction - RAS CNC control model "MULTIBEND 5000" * material and tool library * swiveling - front right * 1x emergency stop button - CNC electro-motorized upper beam adjustment * fast closing and opening speed * programmable opening and closing height * bending radii without special tools (multiple bends) * rigid upper beam for straight bending parts * 1x set of RAS split upper tools .. height 80 mm Lodpfxjxabz To Aiijhh * RAS "click-in" tool system - CNC electro-motorized bending beam adjustment * fast swivel movement: short production time * crowning system compensates for deformation by the bending forces * 1x set of RAS split bending tools - CNC electro-motoric back stop * fast positioning, repeatable work * table plates hold the weight of the sheet * stainless steel table plates with ball rollers - 2x freely movable double foot switch - 1x RAS tool trolley for bending tools (movable) - operating instructions (PDF) + original circuit diagram

Condition: refurbished (used), Year of construction: 2010, XXL-Center RAS 75.06 - General technical data in mm: Bending length: 6400 mm Max. sheet thickness (400N/mm2): 1.5 mm Ljdpfex Hf Tvsx Aiiohh Max. sheet thickness (750N/mm2): 1.0 mm Max. sheet thickness (200N/mm2): 2.0 mm Gripper claws travel range: 10 – 750 mm Clearance in front of the jaws up to: 300 ° Extendable loading tables: yes Gripper claws: yes Programming: automatic via Bendex Machine dimensions incl. safety fence approx.: 9400 x 3000 Weight: 12.5 tons - Machine-specific data: Motor-driven; 400V, 50/60 Hz, 3-phase Year of manufacture: 2010 Condition: Will be completely overhauled - Images are examples -

Condition: good (used), sheet width 2000 mm plate thickness 2,25 mm Lhjdpfx Asul Ei Eeiieh distance between columns 2040 mm total power requirement 7,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,2x1,7x1,1 m SN-No. 380/6

Condition: ready for operation (used), Year of construction: 1951, Large working width: 1250 mm for sheets up to: 1.75 mm opening width of upper beam: 70 mm adjustability of bending beam: 50 mm space required: 1880 x 740 x 1140 mm Lsdpfxsv D E R Do Aiijhh

Condition: ready for operation (used), Max. working width: 3060 mm For sheets (at 40 kg strength) up to: 4 mm Min. bending radius: sheet thickness x 1.25 Min. inside flange height: sheet thickness x 6 Upper beam opening width: 220 mm Lower/bending beam adjustability: 90 mm Lhjdpoxwnltofx Aiioh Max. bending angle: 180° Stroke speed down/up: 40/60 mm/s Hydraulic drive: 380 V, 7.5 kW Weight: 4.3 t Required space: 4150 x 1800 x 2500 mm

Condition: used, Year of construction: 1980, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° table height 750 mm table width 320 mm back stop - adjustable 5,0-550 mm total power requirement 3 kW weight of the machine ca. 1600 kg Equipment: - manual backgauge, with analog display * Adjustable from the front * stepless adjustment over the entire travel range - 1x long side stop Lhsdpfx Aieyv N I Aoish - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: used, Year of construction: 1986, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° table height 750 mm table width 320 mm back stop - adjustable 5,0-550 mm total power requirement 3 kW weight of the machine ca. 1300 kg Lhsdpfx Ajyv Nn Ajiijh Equipment: - manual backgauge, with analog display * Adjustable from the front * stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Lodpfx Aov Tk Exjiijhh Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: good (used), Year of construction: 1990, machine/vehicle number: 79-3, Offer 26091 Technical specifications: Ledpoyzpgpefx Aiishh - Max. working width: 3200 mm - Max. material thickness at 40 kp / mm² yield strength: 2.5 mm - Bending angle electronically preselectable: 0 – 180° - Operation via hand or foot switch - Maximum opening width / stroke of upper beam: 200 mm - Height adjustment: - of the bending beam: 80 mm - of the lower beam: 90 mm - Upper beam drive approx. 400 V / 1.8 kW - Bending beam drive approx. 400 V / 2.6 kW - Required space approx. W 4200 x H 1550 x D 2200 mm - Weight approx. 3800 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 63/4, Offer 26093 Technical Data: - Max. cutting length: 3050 mm - Max. material thickness at 40 kg/mm² strength: 2.5 mm Lhsdpfxsyzpbme Aiijh - Cutting gap adjustment - Cutting angle: 1°35′ - Strokes: 50 1/min - Frame throat: 100 mm - Table height: approx. 750 mm - Front angular stop: 850 mm - 2 support arms: 500 mm - Manually operated backgauge accessible from front: 5 – 750 mm - Pneumatic sheet support - Electric foot switch - Drive: 400 V / 5.5 kW - Required space: approx. W 3800 x H 1500 x D 1400 mm - Weight: approx. 2900 kg

Condition: repair required (used), functionality: limited functionality, The machine's monitor is damaged. Lsdpfx Aijyw Rl Ejiehh

Condition: good (used), Year of construction: 1980, machine/vehicle number: 27-3, Offer 23317 Technical data: - max. working width 2040 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - Bending angle setting electronically preselectable 0 - 135 ° - smallest bending radius 1.25 x sheet thickness - Smallest inner flange height 6 x sheet thickness - Automatic sequence control for a complete work process - Operation via hand or foot switch - largest opening width / stroke of the upper beam 200 mm - Height adjustability - of the bending beam 80 mm - of the lower beam 80 mm - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 1.5 kW - Manual backgauge can be operated from the front Lhodporklfrofx Aiish - Space requirement approx. W 3300 x H 1350 x D 1500 mm - Weight approx. 2600 kg

Condition: used, Year of construction: 1984, machine/vehicle number: 220-3, Ref. No. 25304 Lhedsw U Rb Hjpfx Aiish Technical Data: - Machine for producing longitudinal seams on the edges of square or rectangular long ducts - Number of roller shafts with seam rolls: 15 pcs - Material thickness: from 0.5 to 0.63 mm - Duct dimensions: from 80 x 80 mm up to 100 x 100 mm - For duct dimensions from 100 x 100 mm - Material thickness: 0.5 to 1.0 mm - Feed speed: 15 m/min - Pneumatic connection - Drive: 400 V / 3 kW - Includes: - Foot switch - Duct guide plates - Separate lubrication system - Space requirements: approx. W 5400 x H 1200 x D 800 mm - Weight: approx. 950 kg

Year of construction: 2007, condition: excellent (used), RAS Turbo bend plus 62.25 New gearboxes fitted from Ras Bending length 2540mm / 2.5 metre Material thickness max 2.5mm Lhsdpfxegd Dgqo Aiish Four extremely dynamic and fast ramp-driven movements under CNC System 6000 CNC touch screen – New control fitted in 2016 Extended back supports Light guards Portable tooling rack New / Year of manufacture 2007 Complete with: J shape back gauge Complete with segmented and straight tools and tooling rack Tooling (supplied with the machine): Standard ‘sharp’ upper tooling – 3x lengths 845mm Bottom tooling single length – 1x 2.54m length 10mm wide Bottom tooling single length – 1x 2.54m length 20mm wide Goats foot segmented upper tooling – 110 height section 200mm wide – 10 lengths 60mm – 1 length 55mm – 1 length 50mm – 1 length 45mm – 1 length 40mm – 1 length 35mm – 1 length 30mm – 1 length 120/90mm LH Box end – 1 length 120/90mm RH Box end – 1 length Segmented bottom tooling 200mm wide – 10 lengths 120mm – 2 lengths 60mm – 1 length 55mm – 1 length 50mm – 1 length 45mm – 1 length 40mm – 1 length 35mm – 1 length 30mm – 1 length Tool cart supplied

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bending beam, max.: 90 degrees/sec Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge Ljdpew T Sc Aofx Aiiohh • Motorized lower beam adjustment and bending beam adjustment • Support table A good selection of tooling, segmented and full length

Year of construction: 2012, condition: excellent (used), Used Ras 62.25 CNC Folder Model: 62.25 Ras Year 2012 RAS 62.25 CNC folder Capacity: 2540mm x 2.5mm CNC Auto Bending Machine (Year 2012) Lhjdjn Tnzfspfx Aiijh Complete with fitted System 6000 Touch screen control (screen recently replaced) 3.2 Metre J shape back gauge Twin Foot Pedal Control MACHINE GUARD SOLUTIONS Light Guards Complete with segmented and straight tools

Year of construction: 2000, condition: used, Used Ras Reinhardt 62.30 TURBObend Plus cnc folder for sale We had two of these Ras folders in stock, one has sold and this is the last one left in stock available for sale. Ras cnc sheet metal panel folder / Ras cnc electric motor driven folder for sale. Model: 62.30 Turbo bend plus Capacity: 3metre x 2mm Year: 2000 Back gauge: 9 powered fingers Cnc graphic touch screen control: Series 5000 We are also interested in buying used Ras folders that are for sale or for part exchange, examples below: Lhodpfef Ar Ihex Aiish Bending machines RAS Flexibend 73.30 RAS GIGAbend 76.30 RAS We can deliver and install in your factory at additional cost with a Ras folder service engineer in mainland uk, delivery can be arranged overseas or we can load to your transport.

Condition: used, Used RAS 62.30 Turbobend CNC Folder Used RAS 62.30 Turbobend CNC Folder Year 2014 Lhsdofuakyopfx Aiijh Sheet thickness 2mm, Working length 3,200mm back gauge depth 6 – 1,550mm, back gauge accuracy +/- 0.15mm, accessories

Year of construction: 2016, condition: excellent (used), Used modern, very clean & fully serviced RAS UpDownBend 78.40 cnc Folding System for sale 4metre up and down cnc folding machine with U shape back gauge as highlighted per photograph Year 2016 Technical Data: Material Thickness max. (Mild Steel) 3.0mm Material Thickness max. (Stainless Steel) 2.0mm Material Thickness max. (Aluminium) 4.0mm Working Length 4060mm / 4metre Gauging Depth ("U" shape) 95-3270 (4150)mm Stop Finger Units (fix - telescope - fix) 2 + 10 + 2 Gauging System Accuracy -/+ 0.1mm Open Height Upper Beam max. 600mm Telescopic Gauging System (Travel Range) 640 – 1520mm Pivot Point Adjustment +/- 15mm Folding Beam Height Adjustment 150mm Folding Beam Travel Range 180 deg Working Height 1000mm Ledjnnz Apepfx Aiishh Speeds: Upper Beam 75mm/s Folding Beam 110 deg/s Gauging System from min to max 2.2s