Used Quill Stroke for sale (8,111)

Condition: repair required (used), functionality: limited functionality, travel distance X-axis: 500 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, mount diameter: 40 mm, total height: 1,800 mm, total width: 1,500 mm, total length: 1,600 mm, table width: 800 mm, table length: 395 mm, For sale is a conventional milling machine with active control from Hermle and type UWF 801 A hydraulic hose is defective and has already been removed and replaced. After installation, the machine is fully functional and ready for use (we can do this for you) The machine is easy to use and yet efficient, which makes it ideal for the do-it-yourselfer but also for industry. x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle mount ISO: SK40 Spindle head swivels left and right: right/left = 90° ° Quill stroke vertical: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed: X+Y: 4 - 1600 steples mm/min Feed: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 and Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Iedpfx Aovtpm Usffjik Chip collection tray Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: used, Year of construction: 2014, operating hours: 4,474 h, load capacity: 3,500 kg, lifting height: 3,754 mm, fuel type: electric, construction height: 2,165 mm, Equipment: cabin, Electric forklift, load capacity approx. 3500 kg, height of mast extended: 3754 mm, stroke: 2995 mm, comfortable driver's cabin, 3.5? LED color display with steering angle and tilt angle display, online data transfer, two-motor front-wheel drive, overhead tilt cylinder, fork length: 1480 mm, AXIMA battery charger, type: Flexis 80D75, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. Iisdpfx Asvnnu Hoffjk We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: used, bore capacity in steel (diameter) 40 mm Iedpfsx Iwgqsx Affsik throat 345 mm bore stroke 180 mm spindle turning speed range 25-640 U/min column diameter 180 mm table-size Ø ca. 560 mm surface area Ø 445 mm feeds 0,1; 0,2; 0,3 mm/U spindle taper MT 4 weight of the machine ca. 1 t dimensions ca. 650 x 1000 x 2100 mm with thread cutting device foot switch With coolant device in the base steplessly variable speeds, 2 gear stages, and 2 motor speeds

Condition: excellent (used), turning diameter over bed 280 mm turning diameter over slide rest 160 mm turning length 500 mm centre height 140 mm Iisdpfx Aowm Rmuoffok centre distance 500 mm spindle bore 36 mm spindle turning speed range 15 - 3550 U/min spindle head DIN 55022 Gr. 5 feeds - longitudinal 0,008 - 0,560 mm/U feeds - cross 0,004 - 0,280 mm/U thread - mm pitch 0,2 - 12 mm dia. of leadscrew 24 mm lead of leadscrew 6 mm tailstock taper MT 3 tailstock quill stroke 90 mm tailstock adjustment out of the central pos. 15 mm total power requirement 2,2 kW weight of the machine ca. 0,6 t dimensions of machine L x W x H 1,40 x 0,70 x 1,20 m - machine out of teaching shop - Accessories: DRO on 3 axis, 4-jaw chuck RÖHM 140 mmø, MULTIFIX-head A,

Condition: used, Year of construction: 2012, operating hours: 25,000 h, total length: 5,250 mm, total width: 2,350 mm, total height: 2,750 mm, Weight: 12.500 kg Price: On request - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 7336127126 Ijdpfswmf Efox Affsik - Operating hours: 25000 - Drive system: CNC - Control system brand: Cybelec - Control system type: DNC-880S - Power [kW]: 18.5 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 175 - Max. working width [mm]: 4050 - Column gap [mm]: 3600 - Max. stroke [mm]: 255 - Control type: DNC 880S - Control: CNC - Transport dimensions: 5250mm x 2350mm x 2750mm (l x w x h) - Transport weight [kg]: 12500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2000, functionality: fully functional, clamping force: 7,500 kN, Equipment: documentation/manual, Engel ES4550/750K-V (2000) Injection Moulding Machine – Technical Data • Screw diameter: 90 mm • Shot volume (max.): 2480 cm³ • Injection rate (theoretical): 530 cm³/s • Specific injection pressure: 1910 bar • Increased injection pressure: 2180 bar • Plasticising capacity (standard screw): 70 g/s • Plasticising capacity (barrier screw): 118 g/s • Screw L/D ratio: 20 (standard) / 24 (barrier) • Screw speed: 140 rpm • Heating power: 67 kW • Number of heating zones (incl. nozzle): 7 Clamping Unit • Clamping force: 7500 kN • Holding force: 8250 kN Iiedpfx Asx Iu U Ejffsk • Opening stroke: 900 mm • Mould height min./max.: 400 – 1120 mm • Max. daylight: 2020 mm • Platen size (H × V): 1500 × 1390 mm • Tie bar spacing (H × V): 1025 × 925 mm • Tie bar diameter: 170 mm • Ejector stroke / force: 250 mm / 110 kN Weights & Power • Drive power (hydraulic pump): 75 kW • Oil volume: 1000 l • Injection unit weight: 10 t • Clamping unit weight: 30 t • Net machine weight (without oil): 40 t

Condition: excellent (used), Year of construction: 2005, operating hours: 4,108 h, functionality: fully functional, machine/vehicle number: 591343, clamping force: 1,550 kN, An injection molding machine of the Ferromatik brand and type K-TEC 155 S / 2F is for sale. The machine is in very good condition. Please note the low operating hours of only 4,108 h Technical data: Year of construction: 2005 Clamping force: 1,550 kN Clear column distance (H. x V.): 500*500 [560*560] mm Mold opening stroke: 650 mm Platen distance max.: 950 [1150] mm Tool installation height: 300 [500] mm Opening force: 86 kN Screw diameter 1: 50 mm Screw diameter 2: 40 mm Injection pressure max.: 1568 bar Max. stroke volume: 314 cm³ Electrical connection: 40 kW Machine dimensions (L x W x H): 5,500 x 1,700 x 2,400 mm Isdpfjt Tdptox Affsik Weight: 7,800 kg Oil tank capacity: 480 l On request, loading onto trucks and transport throughout Europe can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, maximum load weight: 19,520 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 07/2014, loading space length: 9,800 mm, loading space width: 2,400 mm, loading space height: 1,400 mm, loading space volume: 33 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Special semi-trailer for stone transport, side aluminum side walls can be lowered hydraulically with pneumatic locking, hydraulically movable locking walls at the rear with 1,000 mm stroke and internal mechanical extension 8 x 150 mm, sheet steel floor, 16 pairs of retractable lashing rings on the outside and in the middle of the loading area, ATLAS rear crane type: AK 330.2V-10.4/2 A12, 2-way support hydraulically extendable and supportable, grab control, swivel range 410 degrees, emergency stop, 2 hydraulic. Extensions, diagram: approx. 6.8m - 4810kg, 8.6m - 3800kg, 10.3m - 3150kg, stone stack grab, central lubrication system, 5 x work lights, reversing camera, ABS, EBS, BPW EcoPlus axle(s), last axle forced steering / from the fifth wheel plate via steering rods to pivot-steered axle, drum brake system, air suspension with lifting and lowering device, support winch(s), tow coupling, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Isdpfxovnnnts Affoik Please contact us!

Condition: used, bore capacity in steel (diameter) 40 mm continious capacity 25 mm throat 315 mm bore stroke 200 mm bore depth 280 mm spindle taper MT 4 feed range 0,1-1,5 U/min column diameter ca. 230 mm number of feeds 9 table-size 700 x 600 mm surface area 450 x 560 mm distance spindle/base plate 1100 mm Iiodpfx Afox Iwgkjfjk dimensions ca. 1000 x 700 x 2400 mm total power requirement 2,6 kW weight of the machine ca. 1,1 t emergency stop switch renewed

Condition: good (used), Year of construction: 2007, Marca: SCHIAVI Modelo: HFBs 100/ 3 Nominal capacity: 100 tons Table length: 3110 mm Iijdpfjxaz Igjx Affjk Work table width: 90 mm Working height without rise: 910 mm Maximum distance between tables: 450 mm Maximum nominal stroke: 250 mm Gooseneck depth: 405 mm Distance between uprights: 2700 mm Maximum pressure: 303 MPa Oil capacity: 126 dm³ Maximum length (footprint): 4000 mm Motor power: 7.5 kW

Condition: good (used), Year of construction: 2000, functionality: fully functional, overall weight: 49 kg, load capacity: 8 kg, arm reach: 500 mm, controller manufacturer: Bosch, controller model: Rho 4.1, For sale are 2 Rexroth robot systems in good condition, which can be offered individually or as a package Technical data: Tripod length: 500 stroke*quill: 200*25 mm Device connection: continuous User setting: standard PN pressure: max 8 bar Load: max 8 kg Weight: 48.5 kg Control included Iiodpfxorrvhgs Affek No teach panel available On request, transport can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, maximum load weight: 19,520 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 07/2014, loading space length: 9,800 mm, loading space width: 2,400 mm, loading space height: 1,400 mm, loading space volume: 33 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Special semi-trailer for stone transport, side aluminum side walls can be lowered hydraulically with pneumatic locking, hydraulically movable locking walls at the rear with 1,000 mm stroke and internal mechanical extension 8 x 150 mm, sheet steel floor, 16 pairs of retractable lashing rings on the outside and in the middle of the loading area, ATLAS rear crane type: AK 330.2V-10.4/2 A12, 2-way support hydraulically extendable and supportable, grab control, swivel range 410 degrees, emergency stop, 2 hydraulic. Extensions, diagram: approx. 6.8m - 4810kg, 8.6m - 3800kg, 10.3m - 3150kg, stone stack grab, central lubrication system, 5 x work lights, reversing camera, ABS, EBS, BPW EcoPlus axle(s), last axle forced steering / from the fifth wheel plate via steering rods to pivot-steered axle, drum brake system, air suspension with lifting and lowering device, support winch(s), tow coupling, vehicle can be covered with advertising and/or labeled Iedpfx Ajvnnngjffeik Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm turning dia. in gap 815 mm bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm metric threading 0,4-14 mm inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Overall size ca. 4700 x 1100 x 1400 mm weight ca. 3200 kg power capacity 9,4 kW Accessories: Ijdpfx Afoxnqzxsfjik 3-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Turning chuck guard Rear chip guard Coolant device Work light manual available

Condition: repair required (used), Year of construction: 1996, For sale is an IXION TL 601 deep hole drilling machine. Unfortunately, the machine is experiencing electrical problems. Constants need to be reset by a technician, and the backup battery needs to be replaced. New LCD display was recently installed. New LED display. Machine No. 950192 Year of manufacture 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner -Travel paths + Quill Tl 601 (Z) 600 mm + Vertical drilling unit (Y) 300 mm + Transverse table (Table surface 1200 mm x 600 mm) (X) 700 mm + In drilling direction (W) 1000 mm -Clamping table + Table surface (standard) 1200 mm x 600 mm + Table load (T1200) 1000 kg -Tool holder + SK 40 holder according to DIN + Pull stud 69871 According to DIN 69872 Ijdpfxjh Dpv Re Affsik -AC main spindle drive 3.0 kW + At 100% duty cycle, S1 5.5 kW At 50% duty cycle, S6 7.5 kW +Spindle turning speed Directly programmable 100-4000 rpm Performance: +Drilling capacity in steel 2312 D 32 mm +Tapping M24 -Weight / Dimensions Weight 2500 kg Length approx. 4230 mm Width approx. 1885 mm Height approx. 1870 mm All prices plus VAT We can deliver and commission the machine. All prices plus VAT Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours?

Condition: used, maximum load weight: 19,520 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 07/2014, loading space length: 9,800 mm, loading space width: 2,400 mm, loading space height: 1,400 mm, loading space volume: 33 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Special semi-trailer for stone transport, side aluminum side walls can be lowered hydraulically with pneumatic locking, hydraulically movable locking walls at the rear with 1,000 mm stroke and internal mechanical extension 8 x 150 mm, sheet steel floor, 16 pairs of retractable lashing rings on the outside and in the middle of the loading area, ATLAS rear crane type: AK 330.2V-10.4/2 A12, 2-way support hydraulically extendable and supportable, grab control, swivel range 410 degrees, emergency stop, 2 hydraulic. Extensions, diagram: approx. 6.8m - 4810kg, 8.6m - 3800kg, 10.3m - 3150kg, stone stack grab, central lubrication system, 5 x work lights, reversing camera, ABS, EBS, BPW EcoPlus axle(s), last axle forced steering / from the fifth wheel plate via steering rods to pivot-steered axle, drum brake system, air suspension with lifting and lowering device, support winch(s), tow coupling, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Iiedpfx Afjvnnm Nofek Please contact us!

Condition: ready for operation (used), Year of construction: 2004, clamping force: 500 kN, screw diameter: 25 mm, opening stroke: 350 mm, For sale is an injection molding machine of the company Arburg and the type 320 S 500-150 Ijdpfjkwcydjx Affsik The company from which this machine originates attaches great importance to maintenance. The order of the machine was terminated and no follow-up order was set, so this machine was removed from production. The pump has a slight lack of pressure but is functional Technical data: Year of construction: 2004 Clamping force: 500 kN Screw diameter: 25 mm approach force: 35 kN Opening force 120 kN opening stroke 350 mm clamping platen distance 575 mm Mold installation height 225 mm Prices plus value added tax Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: used, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 120 rpm, table length: 550 mm, table width: 320 mm, spindle mount: MK 2, total height: 1,500 mm, total length: 1,400 mm, total width: 2,100 mm, rotational speed (min.): 120 rpm, rotational speed (max.): 3,000 rpm, drilling capacity: 75 mm, distance between stands: 600 mm, spindle motor power: 551 W, For sale is a Hauser brand coordinate drilling machine of type OP3 The machine is ready for use and fully functional Technical data: HAUSER OP3 coordinate drilling machine Table: 550 x 320 mm Iisdpfxjvzrx Ns Affjk Longitudinal travel: X-axis 400 mm Cross travel: Y-axis 250 mm Vertical travel: Z-axis 400 mm Cone in the spindle: MK 2 Drilling capacity in steel: 20 mm Stroke of the drilling spindle Z-axis: 130 mm Bore diameter: max. 75 mm Distance from table to spindle: 600 mm Spindle speeds: infinitely variable: 120- 3000 rpm Feed rates: Drill spindle slide: Number (steps) 2, 0.03 mm/rev 0.06 mm/rev Spindle motor: 0.75 HP Machine weight: approx. 1500 kg Dimensions: 1400x1500x2100 Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewings possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 184686, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 420 mm, displacement volume: 54 cm³, injection weight: 45 g, opening stroke: 500 mm, For sale is an Arburg injection moulding machine, model 420 C 1000-150/60. The machine is in excellent technical condition and has been very well maintained. Iedpfsx Itamsx Affeik Technical data: Year of manufacture: 2001 Clamping force: 1000 kN Tie bar spacing: 420 x 420 mm Opening stroke: 500 mm Mould installation height: 250 mm Mould mounting plate: 570 x 570 mm Ejector stroke: 175 mm Screw diameter: 25 mm Calculated shot volume: 54 cm³ Shot weight: 45 g/PS The machine is offered without periphery. Rotary table, material conveying systems, temperature control units and other accessories are not included.

Condition: good (used), Year of construction: 2003, operating hours: 106,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Further service reports and documents available Technical data: YEAR OF MANUFACTURE: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Closing force: 50 kN Opening stroke: 500 mm distance between ejector plates: 750 mm Ejector force: 40 kN Advance package - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy Ijdpfx Ajrp Dyroffeik energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 1965, functionality: fully functional, throat depth: 930 mm, For sale is a Donau brand DR30 high-speed radial drilling machine. The machine is in good and fully functional condition. Technical specifications: Year of manufacture: 1965 Drilling capacity in steel (diameter): approx. 30 mm Tapping capacity in steel: approx. M36 in cast iron Spindle mount: MK 3 Spindle speeds: Continuously variable approx. 45 - 2240 rpm Quill stroke: approx. 170 mm Thrust: approx. 930 mm Boom swivel range: 360° Table size: 1200 x 500 mm Spindle motor power: 4.0 kW Weight: approx. 1.8 t Dimensions (L x W x H): approx. 1.3 x 2.1 x 2.45 m Tapping device with shut-off and reversing. Motorized boom height adjustment. Left-hand drilling control, hand and foot. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Iedpfewal Hpex Affoik Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website.

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 35 mm, clearance between the columns: 850 mm, ejector stroke: 575 mm, plate width: 650 mm, plate height: 650 mm, For sale is an Arburg 470 S 1300-675 injection molding machine. Technical specifications: Year of manufacture: 2001 Pump hours: 90,176 Automatic operation: 76,747 Clamping force: 1300 kN Opening stroke: 575 mm Distance between bars: 850 mm Minimum mold height: 275 mm Clamping platen size: 650 x 650 mm Ejector stroke: 175 mm Ejector force forward/backward: 40 Nm Screw diameter: 35 mm 50 mm replacement cylinder available for an additional charge Iijdpfxowivkdo Affok Geiger Handling MiniLiner 3.0 is included in the offer. Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, visit our website.

Condition: good (used), machine/vehicle number: 181825, clamping force: 800 kN, For sale is an injection moulding machine from Arburg, model Allrounder 370 S 800-350. The machine is in good condition. Technical Data: Arburg Allrounder 370 S 800-350 Injection Moulding Machine - Operating hours: - Machine cycles: 8,011,944 - Pump: 69,544 h - Automatic operation: 59,358 h - Clamping force: 800 kN (approx. 80 tons) - Tie bar spacing (H x V): 370 mm x 370 mm (clearance between tie bars) - Mounting platen dimensions (H x V): 545 mm x 545 mm - Maximum opening stroke: 500 mm (variable) - Minimum mould height: Min. 250 mm, partially also min. 200 mm depending on configuration - Maximum daylight: Max. approx. 650 mm−750 mm, depending on minimum mould height - Ejector force: Typically approx. 35 kN Transport and loading can be organised Europe-wide for an additional fee upon request. Prices are exclusive of VAT. Iijdpfx Afoxt E Tyofsk Viewing is possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you require a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2004, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 80 mm, injection pressure: 2,500 bar, For sale: Injection moulding machine Arburg 820S 4000-2100, serial no. 195746. The item is in good condition. Technical specifications: Year of manufacture: 2004 Injection unit: 2100 Screw diameter: 80 mm Shot volume: 1407 cm³ Clamping force: 4000 kN Tie bar spacing: 820×820 mm Platen size: 1171×1171 mm Maximum mould height: 850 mm Maximum opening stroke: 700 mm Maximum distance between platens: 1550 mm Ejector force: 100 kN Ejector stroke: 250 mm Maximum weight of moving mould half: 4500 kg Hydraulic pump drive power: approx. 55 kW Total installed power: approx. 88.9–96.2 kW Number of heating zones: 6 + nozzles Net weight of machine: 22,700 kg Iiodpfx Afsxxi Nvsfjk Dimensions (L × W × H): approx. 8.0 × 2.3 m Control system: SELOGICA Machine cycles: 4,157,591 Pump hours: 69,800 Auto mode: 58,556 Transport and loading can be organised Europe-wide on request, at an additional cost. Prices excl. VAT Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine purchase & sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing business? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: repair required (used), Year of construction: 1987, For sale is a small milling center of the brand Maho and type 300 C The power supply unit is defective but can be repaired Technical data: YEAR OF MANUFACTURE 1987 Type: MH 300 C CNC control Phillips 432 Table: 550x275 mm Travel x/y/z : 300/350/220 mm SK 40 holder Iiedpfx Aoir U H Ejffok Spindle speed: 20-4000 rpm Main drive: 3.3 kw Rapid traverse: 3 m/min Quill stroke: 50 mm Dimensions: 2000 x 2000 x 2000 mm Weight: approx. 1900 kg Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 1988, condition: good (used), For sale is a milling machine of the company Maho and the type 500 W The machine is in good condition and fully functional Year of manufacture: 1988 Heidenhain TNC 232 travels X- 500 mm, Y- 380 mm, Z-350 mm spindle mounting ISO 40 quill stroke vertical 50 mm spindle speed 20-4000 rpm, infinitely variable feed range 1-3000 mm/min rapid traverse 5 m/min table load 250 kg total power requirement 11,3 kW Machine weight approx. 2 t Iedpfxjittrlj Affjik All prices plus VAT machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website