Used Quill Stroke for sale (8,108)

Condition: good (used), Year of construction: 1992, Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform -Load capacity: 500 kg -Platform: 2200 x 1000 mm -Dimensions retracted: 450 mm -Extended dimension: 600 mm -Attention stroke only: max. 150 mm Nedsb A R I Dopfx Af Eewn -without control -Number: 7x lifting tables available -Price: per piece -Dependent weight: 700 kg/piece

Condition: new, 1 new centre punch size MK 6 Nwedpjgwt Uksfx Af Esn (Other sizes available in stock)

Condition: refurbished (used), Year of construction: 1988, CARLO SALVI 873/SV revised to NEW Diam. 9 mm max Length 100 mm max Length Cut 125 mm max PPM 250 Available at Calolziocorte (LC) - ITALY Delivery time: 8 weeks Revision made by HBR srl with: Nodjittf Sjpfx Af Ejwn - New electrical system according to CE standards with inverter and PLC - New Lubrication System - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings

Year of construction: 2015, condition: used, Cutting height max. 140 mm Motor output 11 kW cutting width 600 mm Cutting length 6200 mm Dimensions (L/W/H) 8400x1900x2090 mm Weight 3500 kg Number of working hours 3331 h Raimann FlexiRip "Jrionline" Automatic Longitudinal Circular Saw ----- Cutting length 6200 mm Machine base, carriage, feed ----- - Motor according to IE3 standard: 11 kW (15 HP) - Precise cutting thanks to the self-supporting, torsion-resistant steel construction and carriage guides on generously dimensioned, hardened, and ground round steel tracks. Extra-long and wide carriage with ball-bearing rollers, precisely adjustable and play-free via eccentric axes. - Clean cutting thanks to the stepless height adjustment of the saw blade for quick and optimal adjustment of the saw blade projection to the workpiece thickness. (Levels 1-18) - Continuously adjustable feed speed via pedal across the entire cutting length from 1-80 m/min - Potentiometer for presetting the maximum feed speed - Anti-blocking system for FlexiRip: If the maximum permissible load is exceeded, the saw blade automatically lowers to prevent jamming. The saw carriage then returns to the start position. Your advantage: Reliable protection against machine overload and sawblade jamming - Saw shaft speed: 2,900 rpm - Maximum cutting height: Sawblade diameter 400 mm: Max. cutting height 65 mm Sawblade diameter 450 mm: Max. cutting height 90 mm Sawblade diameter 500 mm: Max. cutting height 115 mm Sawblade diameter 550 mm: Max. cutting height 140 mm Width stop and machine table ----- - Width stop adjustment via several control levers on the front of the machine for precise positioning of the stop with a large digital display, easy to rotate and tilt. - Width stop in a cantilever design with 6 pneumatically pivoting stop cams - Smooth, even, and backlash-free operation of the stop - Width stop driven by 2 hardened, ground ball screws, 32 mm diameter - Maximum usable width (standard): 600 mm - 6 cross chains in the rear machine table, including an extension to the vibrating feeder with roller conveyor transfer (L = approx. 600 mm) to Nwedpfx Aewk N U Ejf Esn the vibrating feeder. Chain distribution according to the layout plan Control System ----- - Electronic machine and stop control "PLC control" with easy-to-read touchscreen on the left side at the start of the cut, mounted at eye level, easily adjustable for rotation, tilt, and height. Ten different cutting lists can store 10 width dimensions each and easily retrieved by touching the screen. These dimensions can be accessed either absolutely or as consecutive dimensions, the latter for working from back to front. Furthermore, for the consecutive sequence from back to front, five different dimensions with target quantities can be stored for automatic board cutting. - The width stop's free travel function can be selected via the touchscreen. - Error diagnostics via error display and cause note in plain text on the screen. Hour and cut counters for precise recording and output of production output. - Rotatable control panel on the swivel arm is particularly advantageous when cutting large-format panels. Operation and Tools ----- - Workpiece clamp mounted on the upper guard beam, inside the slats. ...

Year of construction: 1969, condition: good (used), Steel chain hoist type T 302 400 Volt 2 lifting speeds chain length 3 meter Nodpfx Aod E Akkef Eswn

Condition: good (used), Hollow spindle stroke Nsdpfxsdbc E Ns Af Eewn Diameter 125 mm Weight 6.6 kg

Condition: good (used), linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, linear drive type DGE-25-1500-ZR-LK-RH-KF-GK Nwedpfx Afoud Urre Eon -Stroke length: 1500 mm -Servo motor: Festo type EMMS-AS-55-M-LS-TM -Planetary gear: Neugart PLE 80 -Quantity: 5 pieces available -Price: per piece -Dimensions: 1880/70/H340 mm -Weight: 12.7 kg/piece

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Nsdpexddwrefx Af Ejwn Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: new, functionality: fully functional, total length: 123 mm, clamping range: 40 mm, 2 x Schunk DSF FH40 for Reishauer Grinding Machine RZ150 / RZ160 Njdpfx Afjwzkhne Eswn Clamping device Pull-down chuck / Base chuck / Hydraulic expanding chuck Clamping diameter: 40.00 mm Active clamping length: 40 mm Total length: 123 mm Balanced for n max. = 3,000 rpm Base chuck with clamping stroke control and passage for air system monitoring / hydraulic additional function, from our stock Price / details upon request All technical data subject to errors/typos. We sell exclusively to countries within the European Union.

Condition: excellent (used), For sale: heavy-duty lathe tailstock with manual quill feed and locking mechanism. Made of cast iron with a very solid construction – ideal for large conventional lathes. Condition as shown in the photos – the quill moves smoothly, no play in the base, guiding surfaces are in good shape. Suitable for modernization or as a base for machine rebuilding. Specifications: • Quill diameter: 100mm • Quill travel: approx. 320 mm • Sleeve seat diameter: 44mm • Manual drive: hand crank + locking lever Nsdpjw Rdl Rjfx Af Eewn • Base with bolt-on mounting • Weight: approx. 70–90 kg Possible pallet shipping or personal collection.

Condition: used, Year of construction: 2014, For sale Machine types & quantities: - 1 unit: Linear transport system for 14 stations, type: LT-14-270 (original from sp280) - 1 unit: Automatic loading station - 1 unit: New infeed station - 1 unit: Double spiral kneader + powerbox Type: W240A No.: 7402-978 - 1 unit: Dough return station - 1 unit: Lifting and tilting device type: HK1200 - 9 units: 9 bowls. Type: W240A - The frames and platforms for this line - 1 unit: 1x weighing hopper - 1 unit: 1 star hopper - Powerbox - The small parts required for the line The line can be viewed on site. If you have any questions or comments, please feel free to contact us. The seller will carefully load all goods into the container / truck. The buyer shall arrange transport. Best regards, Nedpfx Asnnz Hwjf Ejwn Leo Holland

Condition: used, No. 3239 Stroke sander Johannsen T 82 K / PNEUMA Used Table size 2800 x 950 mm Belt dimensions 7800 x 150 mm Pneumatically controlled sanding pad Sanding width with one transverse table movement 1000 mm Working length 2700 mm Offset right 850 / 220 mm Passage under belt 375 mm Table height adjustment by handwheel Drive motor 5.5 kW Fan motor 2.2 kW Compressed air connection 6 bar Weight approx. 900 kg Sale on behalf of the customer, ex location near 69124 Heidelberg, without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Nwedpew Id Uyofx Af Een Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2008, condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis, short-stroke linear axis, linear motion rail guide, linear table, positioning table -Manufacturer: RK Rose Krieger, positioning table flat short-stroke linear axis for manual adjustment -Type: RK C 80/194 -Travel: 50 mm -Number: 6x linear axis available Nwsdpfx Afexln N Is Een -Price: per piece -Dimensions: 305/80/H45 mm -Weight: 1.6 kg/piece

Condition: used, Electro Dual Screwdriving Unit with Automatic Feed and Pneumatic Double Stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit is equipped with a pneumatic double stroke, operated via Festo valves and cylinders. Additionally, various monitoring systems are installed for full automation. Technical data: Torque of electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Spring stroke for screwdriver: 20 mm Distance between both screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Requires Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 are each composed of the following components: Rexroth type servo motor Rexroth type 0 planetary gearbox Rexroth type 0 encoder Rexroth type 0 straight drive output Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Njdpfx Aehxvu Esf Eswn Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive output Rexroth Type: 2GA82 SZ2 1/4" SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm One 7 m motor connection cable is included in the delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 28727, DOUBLE-STROKE HEADER NATIONAL 61MS operational Machinery operational, fully functional. Revised in 2024 (mechanical and electrical parts) Available for any test c/o HBR srl Number of die: 1 Number of punches: 2 Pieces per min.: 400 Cutoff diameter: 6 mm. Cutoff length (min./max.): 10/52 mm. Kickout stroke-die (min./max.): 4.8/30 mm. Kickout stroke-punch (max.): 9.5 mm. Upset diameter: 14 mm. Quill diameter: 19 mm. Cutter insert diameter: 12 mm. Die diameter: 41 mm. Cone punch diameter: 32 mm. Finish punch diameter: 35 mm. Power of main motor: 15 KW Floor space (width): 1.340 mm. Floor space (length): 2.680 mm. Height: 1970 mm. Net weight: 4.700 kg. Nwedpfxjt Rp A Hs Af Eon Gross weight: 5.400 kg.

Year of construction: 2009, condition: good (used), hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Nwodedq U S Iopfx Af Esn -Pressure force: at 250 bar 96 to -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm stroke: 495 mm -Total length retracted center hole: 1195 mm -Piston rod mount: Ø 100 mm -Cylinder mount: Ø 100 mm -universally applicable: -Number: 15x cylinders available -Price: per piece -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Nedpfx Afsfx Hyfj Eswn Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Hydraulic cylinder: double-acting stroke 180 mm Nodpsi Au Tmofx Af Eewn -Piston rod: Ø 65 mm -Cylinder: outside Ø 120 mm -Dimensions: Ø 120 x 340 mm -Weight: 16kg

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, hydraulic flat cylinders -Hydraulic cylinders short-stroke heavy-duty cylinders -Stroke: 200 mm -Piston rod: Ø 140 mm Nwedpfx Afewx Hyuj Ejn -Number: 1x cylinder available -Price: per piece -Dimensions: 270/220/H415 mm -Weight: 44 kg

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, hydraulic flat cylinders Njdpfx Ajwx Hx Dsf Eown -Hydraulic cylinders short-stroke heavy-duty cylinders double-acting hollow cylinders -Stroke: 200 mm -Piston rod: Ø 115 mm -Number: 4x cylinders available -Price: per piece -Dimensions: 240/200/H445 mm -Weight: 35 kg/piece

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, hydraulic flat cylinders -Hydraulic cylinder: Short-stroke heavy-duty cylinder with hand hydraulic pump -Cylinder: stroke 10 mm Njdpfx Aswxt Ixsf Eewn -Piston rod: Ø 70 mm -Dimensions: cylinder 130 x 42 mm -Transport dimensions: 500/210/H140 mm -Weight: 6.9 kg

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, hydraulic flat cylinders -Hydraulic cylinders short-stroke heavy-duty cylinders Nwedpewxtynjfx Af Eon -Stroke: 55 mm -Piston rod: Ø 155 mm -Dimensions: 165/100/H100 mm -Weight: 29.8 kg

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, hydraulic flat cylinders -Hydraulic cylinder short-stroke heavy-duty cylinder -Stroke: 30 mm Njdpjwxtx Dsfx Af Eewn -Piston rod: Ø 65 mm -Dimensions: 165/100/H100 mm -Weight: 4.1 kg

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, hydraulic flat cylinders -Hydraulic cylinder short-stroke heavy-duty cylinder double-acting -Stroke: 30 mm -Piston rod: Ø 32 mm -Dimensions: Ø 70 x 165 mm Nwodpfowuqhzsx Af Een -Weight: 3.6 kg

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, hydraulic flat cylinders -Hydraulic cylinders short-stroke heavy-duty cylinders -Stroke: 10 mm -Piston rod: Ø 70 mm -Number: 3x cylinders available -Price: per piece Nodpfx Afswuqgkj Ejwn -Dimensions: Ø 130 x 37 mm -Weight: 3.6 kg/piece