Used Pye 100 for sale (23,475)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Alko Mobil Jet Extraction System Year of manufacture: 2001, 0.75 kW Nodpfeq Abzhjx Ahvjwd H2 tested, 220 Volt Filter area: 3.45 m² Dimensions: 1085 x 650 x 1974 mm Nominal air flow rate: 700 m³/h Manual cleaning, 82 dB(A) Connection nozzle: 100 Ø New waste bin Transport available at extra cost!

Condition: good (used), functionality: fully functional, mobile extraction unit suction pipe 100 mm diameter filter cleaned H2 dust tested 720 m³/h 1.1 kW Nsdsx U Dbhepfx Ahvswd Transport available at extra cost!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12931*19911, Year of construction: 2020, This forklift is a returned lease vehicle. The technical data corresponds to the original invoice; the seller assumes no liability for this information. Box-frame chassis Box frame, bolted tanks, mudguards, 2+2 crane lugs – step on the left side, handrail on the left side – external rearview mirrors on the fender, high-mounted, per pair – driver protection roof, steel construction – mudguards front/rear Drive system (diesel engine, transmission, drive/steering axles) – standard engine air filter, 2-stage element, with insert & indicator – wheel nut protection (10–25 t) – ZF automatic transmission 4WG-191-B – Volvo TAD-881-VE (requires ZF-191), 185 kW/1175 Nm/1600 rpm / 7.7 L / 6 cylinders EU Stage V – engine pre-heater 220 V, electric – Turbo II heavy-duty air filter – Kessler drive axle D91 (W = 4600 mm) Load-sensing hydraulic system with pressure and flow control (low energy consumption) Variable displacement piston pumps, return filter (10 µm) – hydraulic functions for lifting, tilting, and spreader, 1 joystick, power steering – pressure accumulator for lift mast 60 bar/2L (shock absorbing) – Hydraulic Long Life Filter (HLL), 12,000 h, 3 µm, change every 4,000 h – hydraulic oil tank pre-heating (I) – additional hydraulic oil cooler Electrical system 24 V electrical system, monitoring system, CAN-Bus, 7” color display MD4 – LED lights (position/indicator/headlights) & LED work lights (2 on fenders, 2 on mast, 2 rear lights) – additional LED work lights (3000 lumen) on lamp console – qty 4 – Additional LED work lights (3000 lumen) on the boom – qty 2 – additional LED work lights (3000 lumen) on the front fenders – qty 4 – lamp console on the cab roof – reverse alarm – LED beacon (on lamp console) – one (1) 400V/3-phase power outlet for all heaters Electronic machine control (EMC) EMC Master incl. MD4 controller, 7" touch color display (A) – EMC 106 complete monitoring (engine, transmission, hydraulics, levers/joystick & service) – EMC 114 electronic joystick with RPM ramp-up – EMC 123 ECO drive module (fuel functions & settings) – EMC 124 driver login (up to 20 logins) – EMC 125 data logging module (alarm+error) – EMC 129 hour meter – EMC 122 maximum speed (specified 20 km/h) Nsdpfxeylyi Ij Ahvowd OPTIMA – Driver's Cabin Cabin Optima (L x W x H = 1605 x 1480 x 1620 mm) – solid cab, 1 joystick, ventilation, 3 wipers – opening window (right+left), interior rearview mirror (right) – Electrical 24V / 10A / 12.5mm socket / front right – coat hooks (2x) on rear wall of cabin (left and right) – additional trainer seat, 2-point belt, left side – driver seat Isringhausen ISRI 6830KA/870 (air suspension, heating, ventilation, 3-point belt) – DAB/analog radio with Bluetooth, MP3, AUX, USB, 2 speakers – variable wipers front/roof/rear window – ACC air conditioning – electrical 24V / 10A / 12.5mm socket / cab roof right – electrical 12V / 10A / 21.4mm socket / front right – electric cab heater including power socket – long sun visors (roof and front window) – additional rearview mirror (left side) –

Condition: excellent (used), Year of construction: 2015, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen Nwsdpfx Ajx Tdwyjhvod 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: ready for operation (used), Year of construction: 2001, operating hours: 35,241 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, overall weight: 9,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis DECKEL MAHO DMC 100 V was manufactured in 2001. It features impressive travels of approximately 1000 mm in the X-axis, 800 mm in the Y-axis, and 500 mm in the Z-axis. The machine boasts a maximum spindle speed of around 18,000 rpm and includes a KNOLL chip conveyor and coolant filter system. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 100 V vertical machining centre we have for sale. Contact us for further details. Nedpfx Ajyw N A Njhvewd • Control: 1 DECKEL MAHO control unit • Operating hours: 35,241 Additional equipment • KNOLL 450 K-1/40 chip conveyor (2002) • KNOLL RF 200/1100 coolant filter system (2001)

Condition: excellent (used), Weiss Weiss Climate Test Chamber WKL 100/70 -70°C to +180°C, Humidity, 100 Litres Compressor has been replaced! Air-cooled For sale is a professional climate test chamber from Weiss Umwelttechnik. This equipment is ideal for material testing, climate tests, as well as temperature and humidity simulation in industrial environments, laboratories, or R&D. The test chamber provides precise test conditions for extreme temperatures and high humidity levels. Data for Temperature Testing: - Temperature range: -70 to +180°C - Temporal temperature deviation at the centre of the usable space: ± 0.3 to ± 1 K - Spatial temperature uniformity (based on setpoint, range tmin to +150°C): ± 0.5 to ± 2 K - Temperature change rate: Heating 3.5 K/min, Cooling 3.5 K/min - Heat compensation: max. 700 W Data for Climate Testing: - Humidification system: - Reservoir capacity: approx. 13 l - Water quality: demineralised - pH value: 6 – 7 - Conductivity: max. 20 μS/cm - Water consumption at constant temp. +40°C, 92% r.h.: 2 l / 24 h - Temperature range: +10 to +95°C - Humidity range: 10 to 98% r.h. - Temporal temperature deviation at the centre of the usable space: ± 0.3 to ± 0.5 K - Spatial temperature uniformity (based on setpoint): ± 0.5 to ± 1.5 K - Temporal humidity deviation at centre: = 1 to ±3% r.h. Internal dimensions: Height 400 mm, Width 470 mm, Depth 345 mm External dimensions: Height 1776 mm, Width 745 mm, Depth 980 mm Mechanical Load Data: - Maximum load of test compartment floor: 10 kg - Per shelf: 10 kg - Total rack load: 50 kg Operating Data: - Test compartment lighting: Halogen bulb 24V, 50W - Rated voltage: 1/N / PE AC 230V ±10% 50 Hz - Rated power: 3.5 kW - Rated current: 15.2 A - Customer-side fuse: 16A slow-blow - Protection rating: Control cabinet IP 22 and touch panel IP 54 Heat Dissipation (air-cooled chambers): - Max. heat output to environment: 2500 W Nwodpfx Aoyw Nnfjhvsd Noise Level: - Sound pressure level (free-field measurement at 2 m in front, 1.0 m height): approx. 59 dB(A) Feedthrough: 50 mm ∅ Interfaces: Ethernet interface (RJ45), USB interface Refrigerants: R404A / R23 Test chamber volume: approx. 100 litres Weight: 210 kg Important Information for Buyers: For your safety, we perform the following steps before sale of our chambers: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certification 4. After successful testing, each chamber undergoes a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and information may be subject to change and error!) Feel free to contact us by phone for any further questions.

Condition: used, Year of construction: 1961, max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length 0 mm total power requirement 0 kW weight of the machine ca. 3 t Nwodewwl I Iopfx Ahvjd dimensions of the machine ca. 0 m The UMA was built in 1961 and the guides have been rebuilt.

Condition: good (used), Year of construction: 2023, operating hours: 1,031 h, functionality: fully functional, overall weight: 18,999 kg, Belt width: 1,200 mm Nwjdpfsyw Hlujx Ahvjd Belt length: 30,500 mm Dimensions in working position: 28,219 x 2,489 x 12,268 mm (L x W x H) Discharge height at 22° inclination: 12,268 mm Engine manufacturer: Cat C2.8 Operating weight: 18,999 kg Transport dimensions: 16,078 x 2,489 x 3,149 mm (L x W x H) Engine power: 55 kW Throughput: approx. 700 t/h

Condition: excellent (used), functionality: fully functional, warranty duration: 3 months, usable tank capacity: 100 l, input voltage: 400 V, tank capacity: 100 l, total width: 995 mm, total length: 870 mm, total height: 1,300 mm, Aromatization Unit Isernhäger A 100 For thermally controlled pre-doughs For individual production of soaking, scalded, boiled, and aroma pieces Simple control with special agitator Robust technology Connection: 400V, 16A-CEE plug Dimensions: 995 x 870 x 1300 mm (W x D x H) Used machine, cleaned & SAB tested Options: Maintenance contract Delivery service Spare parts box Instruction & commissioning Njdpfoyhznujx Ahvewd Come visit us!

Year of construction: 2010, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3200 mm TONNAGE: 100 ton THROAT DEPTH: 500 mm DISTANCE BETWEEN UPRIGHTS: 2550 mm OPEN HEIGHT: 600 mm UPPER BEAM TRAVEL: 400 mm X-AXIS TRAVEL: 800 mm R-AXIS TRAVEL: 150 mm APPROACH SPEED: 200 mm/sec RETURN SPEED: 180 mm/sec WORKING SPEED: 10 mm/sec Nsdpfx Ahstq Ngbsvowd MOTOR POWER: 11 kW CONTROL UNIT: ESA 875 PLUS WEIGHT: 10500 Kg OVERALL DIMENSIONS: 4300 x 2000 x 3100 mm NOTE: MACHINE EQUIPPED WITH NEW CNC ESA

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE EDGEBANDING (BATCH ONE) Composed of the following machines: M.01) PANELS HANDLING and RETURN SYSTEM Mod. PROFI TBR100/20/30/F M.02) SINGLE-SIDE EDGE BANDER (RIGHT-HAND machine)"HOMAG" Mod. Profi KAR350/12/A Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Numerical Control / Software PC 22 Adjustable feeding speed (m/min ) 18 - 32 Panels in-feed system WZ 14/30 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 3) DOUBLE Glueing Unit (P.U.R. Glue + Quick Melt unit) 2 x PU 34 Pressure zone (N.C. adjustment) - Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) unit WK13 Rough Trimming unit (2 x Kw 055) Fine Trimming unit (Multi-profile, adjustable by N.C.) MF 21 (2 x Kw 0,55) Corner Rounding unit (Contour Trimming) FF 32 (4 x Kw 0,4) Multi-Profile Copying unit adjustable by N.C.(fine and contour trimming) FK 31 (30 m/min) recently added (in a technological "revamping" operation) Profile Scraping unit (Multi-profile, adjustable by N.C.) MN 21 (servo) Finish processing unit (Glue scraper + Buffing unit) FA 11 Jumping Milling grooving unit UF 11 (1 x Kw 4) Nodsinigmopfx Ahvswd M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "BARGSTEDT" Model. TFU200/L/30/12/S

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1280825, turning length: 240 mm, turning diameter: 180 mm, spindle speed (max.): 6,000 rpm, bar diameter (max.): 35 mm, controller model: FANUC SERIES Oi-TD, No reserve price – guaranteed sale to the highest bidder! Njdeyk Ucmspfx Ahvewd Bidding requires timely collection between 08/04/2026 and 16/04/2026! TECHNICAL DETAILS Maximum turning diameter: 180 mm Maximum turning length: 240 mm Maximum swing over bed: 320 mm Maximum bar diameter: 26/35 mm Spindle bearing diameter: 75 mm Maximum spindle speed: 6,000 rpm X-axis travel: 120 mm Z-axis travel: 280 mm Rapid traverse X-axis: 12 m/min Rapid traverse Z-axis: 18 m/min MACHINE DETAILS Control: FANUC SERIES Oi-TD Chuck size: 6 inch Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,400 x 2,500 mm Weight: 2,200 kg EQUIPMENT 12-position tool turret External reference: 27

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 68-3-2329, spindle speed (max.): 855 rpm, spindle speed (min.): 137 rpm, turning length: 225 mm, disc diameter: 317 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 08.04.26 and 16.04.26. TECHNICAL DETAILS Spindle speed range: 137 - 855 rpm Maximum workpiece feed: 260 mm Maximum turning length: 155/225 mm Drive pulley diameter: 317 mm Drive pulley width: 170 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 7000 x 2000 x 2500 mm Machine weight: 18 t Operating voltage: 380V Frequency: 50 Hz Rated current: 120 A EQUIPMENT Nedpfx Ahjyk A Htovewd Configured for 6 spindles External reference: 2

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 67-3-2142, spindle speed (max.): 855 rpm, spindle speed (min.): 137 rpm, turning length: 225 mm, overall weight: 18,000 kg, disc diameter: 317 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection between 08.04.26 and 16.04.26. TECHNICAL DETAILS Spindle speed range: 137 – 855 rpm Maximum workpiece feed: 260 mm Maximum turning length: 155/225 mm Drive pulley diameter: 317 mm Drive pulley width: 170 mm MACHINE DETAILS Operating voltage: 380V Frequency: 50 Hz Rated current: 120 A Dimensions & Weight Dimensions (L x W x H): 7000 x 2000 x 2500 mm Machine weight: 18 t EQUIPMENT Configured for 6 spindles Nwjdpsyk Alpsfx Ahvsd External reference: 1

Year of construction: 2005, condition: used, Log House Milling Machine Year of manufacture: 2005 Log House Milling Machine BL100A – Four-Spindle Unit For producing chalet corner joints by milling all four sides of the log beam in a single clamping operation using 2 vertical and 2 horizontal milling spindles. Processing dimensions: 140 x 200 mm Milling spindle diameter: 30 mm Cutter diameter x width max.: 4 x 220 x 100 mm Motor power: 4 x 3.0 kW Spindle speed: 4,200 rpm Feed: Hydro-pneumatic, infinitely variable with rapid traverse! Operation: Two-hand release / or via control system Milling depth adjustment: Spindle, with digital counter! Workpiece clamping fixture: 2 x vertical pneumatic Extraction: Underfloor hopper, Ø160 mm Complete with electrical system, PLC control, and pneumatics. Machine base prepared for installation of end groove unit, drilling device, and crosscut saw. Fully enclosed machine guarding with upward-swinging protective hood (gas strut assisted) and viewing window. Electric control cabinet on pedestal with 3.0 m cable trunking. – Ready for operation, but without tools! 2 Horizontal Clamps integrated in the BL100 machine table Actuation: Pneumatic from the front Automatic clamping cycle via PLC control. End Groove Milling Unit Milling spindle diameter: 30 mm Cutter diameter x width max.: 180 x 40 mm Motor power: 3.0 kW Spindle speed: 4,200 rpm Feed: Hydro-pneumatic, infinitely variable with rapid traverse! Height adjustment: Spindle, with digital counter! Workpiece clamping fixture: 1 x additional vertical pneumatic Integrated into the BL100. With electrical and pneumatic systems. Ready for operation but without cutter! Horizontal Drilling Unit with Drill Guide and Chip Guard Max. drill diameter: 30 mm Motor power: 1.1 kW Drilling speed: 1,500 rpm Feed: Pneumatic, infinitely variable – with rapid traverse for idle stroke Height adjustment: Spindle, with digital counter! Workpiece clamping fixture: 1 x additional vertical pneumatic Integrated into the BL100. With electrical and pneumatic systems. Ready for operation, with drill bit D=20mm! Nwedpfx Asywpt Uehvjd Under-table Crosscut Circular Saw in BL100A – For automatic operation only! Max. cutting size (W x H): 200 x 140 mm Saw blade diameter: 500 mm Motor power: 4.0 kW Cutting speed: 86 m/s Feed: Pneumatic Operation: Only via program automation (not included in delivery) Workpiece clamping fixture: Pneumatic Extraction hopper Ø120 mm Integrated into the BL100A. With electrical and pneumatic systems – Ready for operation incl. saw blade! Preparation for Automatic Operation Consisting of sliding table (mechanics, pneumatics, and electrics) at the end groove milling unit, as well as the electrical interface for controlling BL100A functions via external Tigerstop control. Infeed table length: 9 m Outfeed table length: 4 m Further technical details to follow Availability: End of March / Beginning of April 2026 Location: Netherlands

Condition: ready for operation (used), Percussion Mill MFL Brand: MFL Type R-CI 100-100 Feed opening 1020 x 760 mm Power: 90 kW E-Motor Weight 9 Tons Nwedjywm Iiepfx Ahvjd

Condition: ready for operation (used), Impact Crusher O&K Brand: O&K Germany Type: 100/125 SR Opening : 1350 x 900 mm Driving: 132 kW E-motor Weight : appr. 17 tons Nsdpfxeywmp Tj Ahvewd

Condition: good (used), functionality: fully functional, “Steinert NES 100 220 E 5009” for Sale Manufacturer: Steinert Type: NES 100 220 E 5009 Belt widthness: 1.000 mm (New belt) With new control-unit. Nodpoxb S Srjfx Ahvswd Overhauled, balanced, sandblasted and painted.

Condition: good (used), Year of construction: 2020, Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir and control unit -Hydraulic pump: Pressure up to 100 bar -Flow rate: 6 l/min -Motor: 3 kW / 1410 rpm -Hydraulic tank/filter/valves: see pictures -Key switch: CNC Electric COB-62C -Dimensions: 470/450/H685 mm Nodpfsywgxbjx Ahvswd -Weight: 84 kg

Condition: used, Year of construction: 2014, Suitable for extracting oil mist. Nominal volume flow: 950 m³/h noise level: 71 dB (A) number of revolutions: 2850 rpm Dimensions W x D x H approx.: 525 x 592 x 781 mm Nsdewnprxspfx Ahvjwd Weight approx.: 55 kg Connected load approx.: 0.75 kW (400 V / 50 Hz), colour: Grey

Condition: used, Year of construction: 1973, machine/vehicle number: 104530, pression: 100 t throat: 350 mm table size: 690 x 840 mm clearance hole in the die: 160 mm Ø tappet area: 450 x 600 mm tappet adjustment: 80 mm stroke adjustment: 8 - 100 mm number of strokes: 60 /min Nwodpfxsddhw Ss Ahved engine: 380 V, 5,5 kW space needed: 1850 x 1850 x 2650 mm weight: 6800 kg

Year of construction: 1976, condition: used, machine/vehicle number: 40 127 76, span the range of around: mit Spannfutter 115/48 (not available) 3 - 42 mm this maximum clamping: 345 mm span the range of around: mit Spannfutter 115/56 (not available) 5 - 50 mm this maximum clamping: 95 mm cutterhead speed: (RM 4) 740 - 1700/(ME 4) 580 - 1160 Upm spindle drive: 3 kW Nwsdps Sxnpefx Ahvod hydraulic drive: 4 kW space: Maschine 2100 x 1380 x 1880 mm weight: ca. 2000 kg

Year of construction: 1985, condition: used, machine/vehicle number: 16085001, Table size: 480 x 1200 mm Procedures x 650 mm y: 420 mm Nedpfx Asb H D Idjhvewd w: 210 mm w (drill head height adjustment): 540 mm smallest/largest distance between table and spindle nose: 0/720 mm Throat depth: 450 mm Spindle retainer: System SF 32 Infinitely variable spindle speeds: 25-5600 RPM Spindle drive: 380 V, 6 kVA Approximate weight: 3 tons Space: 2000 x 2200 x 2300 mm

Year of construction: 1963, condition: used, machine/vehicle number: 63731, working width: 1040 mm metal sheet thickness: 12 mm rear stop: von Hand bis 500 mm power: 380 V, 11 kW space needed: 2500 x 2150 x 1900 mm Njdpob N Ektefx Ahvswd weight: 4100 kg

Condition: good (used), Year of construction: 1980, Straightening force: 100 t Thrust: 325 mm Nwodpfx Ahjvgcpcevjd Table size: 490 x 3500 mm Max. stroke: 160 mm Pillar speed up: 206 mm/s Pillar speed down: 68 mm/s Hydraulic drive: 380 V, 15 kW Space required: 3500 x 1650 x 2760 mm Weight: 5500 kg