Used Pye 100 for sale (24,507)

Condition: ready for operation (used), Festo EMMS-AS-100-S-HS-RMB 550125 servo motor, serial number J8N4265, used, in good condition, 100% functional, scope of delivery as shown in the photos. Guedpfx Akjzzuqds Ueg

Condition: good (used), Year of construction: 1995, Used Colchester CNC lathe Type: Tornado 100 Max turning diameter: 420 mm Max turning diameter over support: 297 mm Max working diameter: 186 mm Max turning length: 350 mm Drive power: 5.5/7.5 kW Spindle bore: 61 mm Gjdoy Atq Iopfx Ak Ueug 12-position tool changer with VDI 3425/Round 30 Fanuc O-T control Year of manufacture: 1995 Incl. tool holder Excl. tools

Condition: good (used), Year of construction: 2008, functionality: fully functional, Well-maintained, used E Brake by Safan Type E Brake 100 3100 Capacity 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Manual crowning Hydraulic Wila NS top clamp Gedpfxszbhk Eo Ak Uoug

Condition: used, Year of construction: 1994, Used premix BC – 10000 Lh Technical Overview: The used premix BC – 10000 Lh is configured as an industrial bottling unit created by BC in 1994, specifically the 10o model. This system is admirable given its production capacity of 10,000 L/h. It is underlined that the machine has been stored in conditions that allow its immediate operation. It can take place immediately following installation and proper assembly.  This used premix is actually located in the north of Italy. Guedpfxevgubdj Ak Ujg Operational and Maintenance Details of the Used premix BC – 10000 Lh: From an operational point of view, this used premix is presented disassembled. This indicates that the shipment of this machine will be fast. It is essential to note that technical manuals are available, an element that will significantly contribute to ordinary and extraordinary management and maintenance. These documents are indispensable resources to ensure the long-term operational efficiency of the system. Features of the CIP System: In terms of sanitization, the integrated CIP system is a crucial component of this used premix BC – 10000 Lh. This functionality is not an option but a necessity, given the importance of in-place cleaning in the bottling process to ensure compliance with sanitation standards. The effectiveness of this system directly influences the quality of the final product and the general efficiency of the production plant. Overall rating of the Used premix BC – 10000 Lh: In conclusion, the premix model 100 presents itself as a machine with robust specifications and a history of reliability. However, interested operators and organizations should proceed with a thorough assessment of their operational needs and compatibility with this specific bottling machine model. Considering its capabilities, the availability of manuals, and the CIP system, it is a unit that, despite its age, retains some value in the appropriate manufacturing context.

Condition: used, machine/vehicle number: FA73, Used OCME VEGA HT 100-2 shrink wrapperTechnical Specifications & Performance DataThe Ocme VEGA HT 100/2 is a shrink wrapper designed for film bundling of cans in industrial packaging and beverage production environments. The machine handles a current 330 ml format and forms film packs using a two-reel configuration. Its stated maximum performance is 100 × 2 ppm, supporting high-output secondary packaging operations.Manufacturer: OcmeModel: VEGA HT 100/2Maximum speed: 100 × 2 ppmContainer type: Aluminum cansCurrent format: 330 ml (3x2) configuration Package configuration: Film packNumber of lanes: 6Number of film reels: 2Maximum reel diameter: Ø 500 mmMaximum container height: 250 mmMachine pitch: 380 mmWorking plane height: 1250 mmPower supply: 400VInstalled power: 210KWOperating pressure: 6 barAdvanced Automation & Control SystemsThis shrink wrapper is equipped with Siemens HMI and Siemens PLC control components for machine operation and process management. The operator station is positioned on the left side. The control architecture supports coordinated handling of the infeed, film management and bundling cycle in a production-line environment.The 400V electrical supply and 6 bar operating pressure should be incorporated into the utility planning for installation. The two-reel arrangement provides film availability for continuous packaging workflows and supports efficient reel-change planning.Production Line Integration CapabilitiesThe VEGA HT 100/2 can be integrated downstream of can filling, seaming, inspection, coding or labeling equipment and upstream of palletizing systems. It is suited to a used bottling line or industrial packaging line where individual cans must be grouped into film packs for handling, storage and distribution.Its six lanes, 330 ml current format and 250 mm maximum container height make it suitable for applications requiring organized multipack formation. Format-related adjustments should be coordinated with the infeed conveyor arrangement, pack pattern and film specifications used by the packaging line.Machine Condition & Maintenance HistoryThe machine is ready for operation and has been refurbished. It is supplied with compatible spare parts and includes a 6-month warranty. The stated condition supports consideration as second hand packaging machinery for operations seeking an available shrink-wrapping solution.Before commissioning, routine checks of film transport components, pneumatic circuits, conveyor interfaces, electrical connections and control functions should be included in the installation and start-up procedure.Operational Performance & VersatilityThis Ocme shrink wrapper is intended for film packaging of cans used across a broad range of production applications. Listed products include still water, sparkling water, soft drinks, milk, oil, beer, wine, spirits and ... Gedpfozvmyaex Ak Uoug

Condition: used, Year of construction: 1994, CNC Press Brake Manufacturer: Blemas Type: 100-33 Year of Manufacture: 1994 CNC Control: Cybelec DNC 74 PSG Press Force: 100 tons Gujdpfxsyvfkls Ak Ujg Working Width: 3 m Weight approx.: 8 tons Dimensions approx.: 3,600 x 1,600 x 2,600 mm 9926ä

Condition: like new (used), functionality: fully functional, planing height: 190 mm, spindle diameter: 50 mm, planing width: 250 mm, overall weight: 10,000 kg, Weinig Hydromat H25N four-sided planer with 100 m/min feeder - German production - hydraulic feed up to 100 m/min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 lower spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW 5 upper spindle 7.5 kW 6 upper spindle 15 kW 7 lower spindle 7.5 kW 8 universal spindle 1800 7.5 kW feed smoothly adjustable up to 100 m/min feed pump motor power 22 kW nine rollers in the table top, three of which are in front of the first head seven upper steel pulling rollers four upper rubber pulling rollers pneumatic pressure jointer on 1-6-7 spindle automatic lubrication of the countertop feeding table 3000 mm speed smoothly adjustable up to 100 m/min two upper pneumatic rollers six lower pulling rollers minimum material length 650 mm Gedpfon Slk Uox Ak Uoug Transport dimensions 11000x2400x2000 mm weight 9 tons

Condition: new, functionality: fully functional, Ferwood Code: R21000980 - Manufacturer Code: OTT1001725591 - Condition: New - Functionality: Fully functional - If interested we offer a revision service, contact us. Godevu Uw Ujpfx Ak Ujug

Condition: used, functionality: unexamined, Ferwood Code: RU0005377 - Manufacturer Code: TDM 1.2-100-300-W1-000 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Godpfxov Efkms Ak Ueug

Condition: used, functionality: unexamined, Ferwood Code: RU0012070 - Manufacturer Code: DKC11,3-100-7-FW - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 12 kg - Dimensions: 70x46x34 cm - If interested, we offer an overhaul service; please contact us. Gedpfx Akeyz Ul Ro Usug

Condition: used, machine/vehicle number: 007998, Max. panel width: 1900 mm Gusdpfow Idacex Ak Uog Max. panel length: 2700 mm Max. forward feed speed: 30 m/min

Condition: used, machine/vehicle number: 006079, Max. panel width: 1200 mm Max. panel length: 3200 mm Gjdpfx Akou N Slvj Uoug

Condition: used, machine/vehicle number: 008648, Max. working width: 1300 mm Gsdpfszmmuljx Ak Usug Max. working thickness: 60 mm Number of painting guns: 4

Condition: used, machine/vehicle number: 005836, X axis working area: 3000 mm Y axis working area: 1000 mm Main Electrospindle power: 3.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 82 Gjdpowuckuofx Ak Usug

Condition: used, Year of construction: 2003, Second-hand machine Year of manufacture: 2003 Features and technical specifications: - Flexible, pneumatic press with very short set-up times - The press consists of a sturdy press frame and an easily manoeuvrable press trolley - and the horizontal and vertical press sides - All controls are within easy reach - During pressing, the MPH 100 causes the press carriage to clamp – similar to a screw clamp - with 3 vertical press sides - with 2 horizontal press sides - Cabinet length 380–2,500 mm - Cabinet depth: max. 600 mm - Cabinet height 350–1,200 mm - Pressing force 3.6 kN per press side - Working height 600 mm Godpjzk N Nasfx Ak Ujug - Weight 1.1 tonnes - Operating pressure 6 bar Availability: at short notice Storage location: 63934 Röllbach

Year of construction: 2005, condition: used, Used machine Year of manufacture: 2005 Features and technical specifications: - BL100A log mill – four-unit assembly - For producing the chalet corner joint by milling on four sides of the log plank in a single clamping operation using 2 × vertical and 2 × horizontal milling spindles - Machining dimensions: 140 × 200 mm - Milling spindles: Ø 30 mm - Cutters: max. 4 × 220 × 100 mm - Motor power: 4 × 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, infinitely variable, with rapid feed - Operation: two-hand release / via PLC control - Milling depth adjustment: spindle, digital display - Workpiece clamping device: 2 × vertical pneumatic - Extraction: Underfloor hopper Ø 160 mm - Features: fully equipped with electrical systems, PLC control and pneumatics - Machine stand: prepared for end-grooving unit, drilling unit and cross-cut saw - Machine enclosure: enclosed, hinged protective cover (gas spring) with viewing window - Control cabinet: mounted on a plinth with a 3.0 m cable hose - Condition on delivery: ready for operation, without tools - Horizontal clamps in the machine table: 2 pieces - Operation: pneumatic from the front - Clamping cycle: automatic via PLC control - Integrated end-groove unit - Milling spindle: Ø 30 mm - Cutter: max. 180 × 40 mm - Motor power: 3.0 kW Gsdpozk Ni Hefx Ak Ueug - Speed: 4,200 rpm - Feed: hydropneumatic, infinitely variable, with rapid feed - Height adjustment: spindle, digital display - Workpiece clamping device: 1 × additional vertical pneumatic - Features: integrated, with electrical and pneumatic systems, without cutter - Horizontally integrated drilling unit with drill guide and splinter guard - Drill bit diameter: max. 30 mm - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: pneumatic, infinitely variable, with rapid traverse for idle stroke - Height adjustment: spindle, digital display - Workpiece clamping device: 1 × additional vertical pneumatic - Features: integrated, with electrical and pneumatic systems, including drill bit Ø 20 mm - Integrated under-table cross-cut saw (automatic operation only) - Max. cutting dimensions: 200 × 140 mm (W × H) - Saw blade diameter: 500 mm - Motor power: 4.0 kW - Cutting speed: 86 m/s - Feed: pneumatic - Workpiece clamping device: pneumatic - Extraction: Extraction hopper Ø 120 mm - Features: integrated, with electrical and pneumatic systems, including saw blade - Prepared for automatic operation - Feed table: mechanical, pneumatic and electrical systems for the end-groove milling unit - Interface: electrical for control via external Tigerstop control unit - Feed table length: 9,000 mm - Discharge table length: 4,000 mm Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N Gusdpjzk Nmrsfx Ak Usg - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: excellent (used), CATALOG NUMBER 7751 TECHNICAL DATA - Track width: 250mm - Working width of roller: 250mm - Max blade diameter: 300mm - Blade bore diameter: 60mm - Max cutting height: 100mm - Table width with extension: 520mm - Table length: 1580mm *from above: - pawls: 2 rows - metal pressure slip roller - shaft with saw blades - smooth metal slip roller *from below: - slip roller - guide rail - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 0.75kW - main motor: 15kW - extraction port diameter: 200mm Guodpjzr Izkefx Ak Uog - overall dimensions L/W/H: 1640x1400x1550mm - weight: 1000kg ADVANTAGES – Italian manufacture – in very good condition – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (if there are significant exchange rate fluctuations, the price may change)

Condition: good (used), Year of construction: 1994, Pressure: 250 t Gsdpfjz Ai Awjx Ak Ueug Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Mobile dust extraction unit AL-KO Mobil-Power-Jet 100 for use with woodworking machines. This compact dust extraction system is designed to be mobile and is suitable for extracting wood dust and chips directly at the machine. The rollers allow the unit to be used flexibly in different work areas. Technical data / Features Manufacturer: AL-KO Type: Mobil-Power-Jet 100 Year of manufacture: 2009 Manufacturer’s serial number: 2433338514 Item number: 195 426 Nominal volume flow: 700 m³/h Minimum volume flow: 565 m³/h Suction nozzle: Ø 100 mm Motor power: 0.75 kW Voltage: 230 V / 50 Hz Nominal speed: 2,850 rpm Nominal current: 4.85 A Protection class: IP54 Negative pressure: approx. 1,020 Pa Dust class: M Mobile / can be moved on rollers Gusdpfx Akezzadcs Usg The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Transportation is possible for an extra charge! Technical data and features may vary. Errors, prior sale and changes are subject to confirmation. All information is provided without guarantee.

Condition: used, Big-bag emptying station (0.5 m³, injection blower) – Plastcompactor HV 50/110 (600–700 kg/h, 4 m³ silo with feed screw, agitator, discharge screw, DS drive 110 kW, 2 compacting discs Ø 500 mm with kneading bars and water cooling, Siemens S7) – Post-cutting mill SML 45/100-S3-2 (10 mm screen, 3x1 rotor/2 stator knives, shear cut, spray mist cooling, hydraulic opening, 45 kW) – Fine material separation with a zig-zag sifter and return system – Material discharge with a double big-bag holder MFT 45/350, blower 7.5 kW, cyclone. Gujdpfxoz Aiuyo Ak Ueg

Condition: new, functionality: fully functional, fuel type: gas, fuel tank capacity: 70 l, color: red, empty load weight: 117 kg, axle configuration: 1 axle, emission class: none, mast type: other, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB BPM 100 | Hand-Push Crack Sealing Machine for Asphalt Repair & Maintenance The TICAB BPM 100 is a professional hand-push crack sealing machine designed for efficient asphalt crack filling, joint sealing, pothole edge repair, and preventive road maintenance. Engineered for contractors, municipalities, and road maintenance crews, the BPM 100 ensures precise application of hot bitumen, crack sealant, or asphalt mastic, helping extend pavement service life and reduce long-term repair costs. Compact, reliable, and easy to operate, it is the perfect solution for both urban and industrial pavement repair works. Key Features ✔ 70 L tank capacity for bitumen, crack sealant, or asphalt mastic ✔ Efficient heating system (diesel or propane) ensures stable and consistent material temperature ✔ Hand-push design for excellent maneuverability and easy operation in confined areas Guodpfx Asx U Atvok Uog ✔ Fast heating and ready-to-use performance for quick jobsite deployment ✔ Durable construction for intensive daily use in demanding environments ✔ Compact size ideal for urban maintenance and small repair teams Ideal Applications • Asphalt crack sealing and joint repair • Pothole edge reinforcement • Preventive road maintenance programs • Municipal streets and highways • Parking lots and industrial pavements • Driveways, sidewalks, and bike paths • Small and medium-scale asphalt repair works Built for Professional Road Maintenance Its precise heating and application system ensures high-quality sealing, preventing water penetration and further pavement deterioration. The TICAB BPM 100 is widely used by road contractors and municipal services looking for a reliable and cost-effective solution for asphalt maintenance. Why Choose TICAB BPM 100? • Simple operation with high productivity • Reliable heating system for consistent material performance • Compact and mobile design for any jobsite • Reduced maintenance costs and long service life • Professional results for crack sealing and asphalt repair The BPM 100 is the perfect balance between efficiency, mobility, and durability for everyday road maintenance tasks. Request a Quote Today Contact us for pricing, delivery options, and technical specifications. TICAB BPM 100 is available for fast production and worldwide shipping.

Year of construction: 2003, condition: used, functionality: fully functional, maximum load weight: 100 kg, total length: 1,965 mm, total width: 1,970 mm, total height: 2,550 mm, loading space volume: 2 m³, machine/vehicle number: 03108, Heavy-Duty 100 kg Steam-Heated Industrial Tumble Dryer for Garment & Textile Processing The Triveneta Grandi Impianti E/100 R.V. is a heavy-duty industrial steam-heated tumble dryer manufactured by Triveneta Grandi Impianti S.r.l., Italy. Designed for continuous industrial laundry and textile finishing operations, this high-capacity dryer is ideal for garment manufacturing, denim production, commercial laundries, and other high-volume drying applications. This unit (MASI internal reference K672) was used in professional apparel production until the factory shutdown and remained operational. Technical Specifications • Manufacturer: Triveneta Grandi Impianti S.r.l. • Model: E/100 R.V. • Machine Type: Industrial Steam-Heated Tumble Dryer • Serial Number: 03108 • Year: 2003 • Country of Manufacture: Italy • Maximum Load Capacity: 100 kg • Heating System: External Steam Supply • Power Supply: 400 V, 3-Phase, 50 Hz • Machine Weight: Approximately 1,450 kg • Dimensions: • Width: 1,970 mm • Depth: 1,965 mm • Height: 2,550 mm Key Features • High-capacity industrial drying drum Guodpfx Akezmwdkj Ujg • Steam-heated drying system • Digital microprocessor control • Programmable drying cycles • Pneumatic door opening system • Stainless steel front loading door • Twin exhaust and ventilation system • Integrated lint filter housing • Emergency stop system • Heavy-duty industrial construction • Designed for continuous production environments Includes • Triveneta Grandi Impianti E/100 R.V. tumble dryer • Integrated microprocessor control panel • Steam connection interfaces • Lint filtration system • Pneumatic door system • Industrial support frame Applications • Garment manufacturing • Denim production • Industrial laundry operations • Textile finishing • Commercial laundry facilities • Industrial garment drying • High-volume textile processing Condition • Fully operational prior to factory shutdown • Previously used in professional garment production • Good industrial condition • Structurally complete • Normal cosmetic wear consistent with industrial use • Minor surface oxidation around the door frame • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting steam, electrical, and utility connections, dismantling, loading, transportation, and all related costs. Professional rigging and lifting equipment are recommended due to the machine's approximately 1.5-tonne weight. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machine is available individually or together with the complete industrial laundry and finishing line.

Condition: used, operating hours: 11,562 h, total height: 1,900 mm, total length: 5,600 mm, total width: 2,000 mm, Empty weight: 8.500 kg Price: On request - Documentation available: No - CE certificate present: No - Operating hours: 11562 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 500 - Swing over bed [mm]: 1000 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 Guedjwp H Efepfx Ak Ujg - Transport dimensions: 5600mm x 2000mm x 1900mm (l x w x h) - Transport weight [kg]: 8500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, injection pressure: 1,865 bar, injection weight: 192 g, mold height (min.): 200 mm, ejector stroke: 100 mm, Year of manufacture: 2007 Injection shot weight: 192g Injection unit 410 Screw diameter: 40 mm Specific injection pressure: 1865 bar Injection volume: 217 ccm Injection shot weight: 192 g Screw L/D ratio: 20 Mold closing unit 100 Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Gusdpfx Akezt I Rns Usg Ejector force: 35 kN Mold height: 200 mm Ejector stroke: 100 mm Weight: 5000 kg Control system: NC4 Tooling: - 2 x hydraulic core - pneumatic valve - Euromap 67 connector