Used Punching Nipple Machine for sale (83,255)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations Gjdpfxjww E Nre Agbeil

Condition: refurbished (used), Year of construction: 2026, pressing force: 25 t, Custom-made machine High-speed punching press B250-740 Table length 740 mm, optionally also 850 mm, Adjustable stroke 13 to 38 mm, Gsdpfxjw U A Ewe Agboil Alternatively to the Bruderer BBV 190/85 roller feed, a servo feeder can be installed. Contact us for detailed offers.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, table length: 2,000 mm, pressing force: 200 t, stroke adjustment: 30,150 mm, overall weight: 32,000 kg, DGUV certified until: 09/2026, year of last overhaul: 2023, Raster servo punching press. Mechanically overhauled in 2023 with new bearings on the eccentric shaft and backlash-free hand-scraped connection between ram and connecting rod. Desch Servox gearbox and Siemens torque motor inspected and overhauled. Three-piece massive tie rod cast construction of the machine components. Stroke adjustment 30 – 150 mm. Ram adjustment 100 mm. Electronic press force measuring system. Hydraulic overload protection system. Hydraulic table clamp. Hydraulic ram clamp. Guide rails. Raster precision roller feeder with hydraulically pressed rollers guarantees high response speed and accuracy. Immediately available. Gisdpfoxbf Nwex Agbsl

Condition: ready for operation (used), - invoersysteem voor plat- en hoekstaal - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Hydraulische schaar voor vlak staal VPS 2200 Giedpfx Agewlkw Djbol cap: 220 ton maximale lengte: 15 200 mm breedte/dikte: 500/25 mm hoek: +/- 45° Hydraulische hoekschaar voor staal VHS 2400 cap: 240 ton maximale lengte: 15 200 mm 200 x 200 mm / 16 mm Hydraulisch ponsen VPO 1000 cap: 100 ton ponsdiameter/dikte: 57/15 mm of 32/25 mm 4 ponsunits voor vlak staal (Verticale positie) 1 ponseenheid voor hoekstaal (horizontale positie) incl. gereedschap Hydraulische teller VNI 1/36 1 codeerschijf 36 tekens tekenhoogte x diepte: 10 x 1 mm Hydraulisch aggregaat VHA 37 37 kW - 250 bar

Condition: used, IMV Punching Press Type: DM 125 Year of manufacture: 2016 Pressing force: 1,250 tons Stroke adjustment: 250 - 500 mm Gijdpfx Ajxnxlxjgbjl Ram adjustment: 300 mm Strokes per minute: 5-35 Installation height: 1,150 mm Table area: 4,500 x 1,800 mm Ram area: 4,500 x 2,000 mm

Condition: used, Shear/Punching machine FICEP 604 N Year of construction: 2002 Shear capacity: 60 T Iron cutting capacity: 100 x 100 x 10 mm Cutting capacity in the round: Ø 45 mm Square cutting capacity: 42 mm Gijdpfexnixvsx Agbsl Shearing: Length 350 x 16 mm max (see abacus) Punching: Max Ø 32 x thickness 16 mm Supplied with many punches Voltage: 380 V Dimensions (L x W x H): 1700 x 800 x 2200 mm Weight: approx 2 T

Condition: used, Year of construction: 2007, Amada punch press EMK 3610NT including MP300 loading unit for sale. Gsdpew Hww Hjfx Agbeil We would like to sell the machine as a complete package with tooling and a Wilson X-Sharp grinding machine. The standard tools are listed in the attached inventory. I can send it to you via email.

Condition: refurbished (used), Year of construction: 2026, pressing force: 50 t, Custom-built machine High-speed punching press B500-950 Table length 950 mm, optionally also available in 1150 mm or 1250 mm, Adjustable stroke 16 to 51 mm, As an alternative to the Bruderer BBV 202/120 roller feed, a servo feed can be installed. Contact us for detailed quotations. Gijdpfow U A Dyex Agbol

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Giedow Tri Nopfx Agbsl Exact details can be found in the PDF.

Condition: good (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 6603, Bruderer BSTA 25 (1983) – For Sale Well-maintained Bruderer BSTA 25 from 1985 in good condition. The machine is fully operational and ready for immediate use. Available now and can be tested in Boxtel, Netherlands. Gsdpfxexawcgo Agboil

Condition: good (used), Stock number: 2832 Machine number: 3004/73 Manufacturer: Raster Year of construction: 1973 Type / Model: HR40NL Pressing force: 40 t Table: 650 x 385 mm ram: 350 x 190 mm Projection: 175 mm Distance table - bottom edge of plunger: 300 mm through hole: 350 x 130 mm ram adjustment: 80 mm Plunger stroke: 0 to 70 mm adjustable Installation height: 235 to 305 mm Sheet width: 10 to 200 mm Sheet thickness continuous stroke: mm Stroke rate: 40 to 180 /min Gijdpfx Aordgncjgbel Connection: 4 kW Accessories/equipment: Pliers feed Condition: good Weight: approx. 4 tons Machine dimensions: 1,400 x 1,800 x 2,250 mm

Condition: excellent (used), machine/vehicle number: PA-399, Format: A3 Giedpfx Ajh Eh U Regbol Paper format: ca 31x45cm

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Gijdoxizanjpfx Agbjl

Condition: new, Year of construction: 2025, PUNCHING MACHINE Model; MAGRAF EP-50cm or EP-70cm Gsdpjbyfu Nefx Agboil Interchangeble tools for punching,scoring.perforating Maximum punching lengts 500,700mm Power 1,1 kW

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, A used four-column automatic punching press MABU with MPC200 control in very good technical condition. Compressive force 30° before UT: 250kN Stroke rate, infinitely variable: 80-400 rpm Stroke adjustment: 7-62mm Tool holder: Diameter 40H7x90mm Clearance between the front/side uprights: 404/334mm Gsdpfxjuh U Eto Agboil Further tech. Data see pdf- document. Tech. Data and dimensions: Errors excepted.

Condition: good (used), Year of construction: 1985, Bruderer BSTA 25 (1985) – For Sale Well-maintained Bruderer BSTA 25 from 1985 in good condition. The machine is in full working order and ready for immediate use. Giodpfx Agexamv Ajbol Available now and can be tested in Boxtel, Netherlands.

Condition: ready for operation (used), Year of construction: 1976, Pressing force: 20 t Table size: 340 x 320 mm (W x D) Ram size: 160 x 230 mm with wedge plate Table opening: 70 x 180 mm Stroke rate: max. 150 strokes/min, infinitely adjustable via PIV gearbox Stroke: 10...50 mm Ram adjustment: 50 mm Equipped with: • Swiveling extension plate for feed • Motorized central oil lubrication • Slide guide with V-prisms • Machine body made of cast iron • PIV gearbox for stroke rate control • Free-standing control panel • 3 cams for feed, etc. • Manual setup via hand lever • Forward and reverse operation Gijdpoxg Rvaofx Agbsl • No documentation or electrical diagrams available Optionally, we can offer a pneumatic feed for the press.

Condition: good (used), Year of construction: 1972, functionality: fully functional, pressing force: 25 t, space requirement height: 2,800 mm, space requirement length: 1,600 mm, space requirement width: 2,200 mm, Four-column punching press Manufacturer: Hermann Raster KG Type: HR SL4S Working area Distance from ram center or distance between the columns under the guide: 160 mm Smallest / largest distance from clamping table to ram at maximum stroke: 260 / 300 mm Smallest / largest distance from clamping table to ram guide: 110 / 150 mm Clamping table Clamping area: 600 x 320 mm Clamping ram Smallest / largest stroke: 0 / 40 mm Ejector stroke (max. 20 mm) Stroke rate: 200-1000 per minute Straightening range: 70 mm Clamping area: 400 x 250 mm Clamping pin: Hole diameter: 40 mm; Depth 70 mm Safety device Electro-pneumatic clutch and spring-loaded brake Power Normal pressure 25,000 kp Cutting capacity 625 mm², K=40 kg/mm² Floor area required without soundproofing 1 m x 1 m x 2.45 m Weight without soundproofing 3,600 kg Floor area required with soundproofing 1.60 m x 2.20 m x 2.80 m Drive type Voltage 380-660 V Current type: Three-phase current Total power requirement 6 kW Drive: AEG, AM 132 MX4, power 7.5 kW, 2860 rpm Gearbox: PIV, FK NA HB 22 Control cabinet: AEG, 190300 Central lubrication: Woerner, PA 15.M1 Flat/V-belt 3, 17 x 2220, rubber material Drive: Variable speed drive Pull width: 65 mm Pull diameter: 224 mm Special features Gripper feed Z2 Useful width: 180 mm Gijdpfxewcxcce Agbol Soundproof cabinet sta Schalltechnische Anlagen GmbH The machine is connected to the power supply and can be tested.

Condition: used, Year of construction: 1979, Motorized high-performance hole punch MUBEA KL 30 Punching capacity 30 t Hole diameter, steel 45 30 in 8 mm or 20 in 12 mm Throat 210 mm Machine dimensions L x W x H approx. 800 x 600 x 1400 mm Weight 330 kg • Mechanical foot release via cable pull Gjdjv N Hrtspfx Agboil • Hand finder • Adjustable hold-down device Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 1983, condition: used, machine/vehicle number: 1338-5, pression power: 30 t table siize: 500 x 700 mm stroke: 50 mm tappet boring: 40 mm breakdown hole in table: 100 mm total capacity needed: 380 V, 11 kW Giodpfxo N Hcgs Agbol weight: 2000 kg space needed: 1000 x 2300 x 2170 mm

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Exact details can be found in the PDF. Gisdjw Trkajpfx Agbel

Year of construction: 1966, condition: used, functionality: fully functional, machine/vehicle number: 562-66280, Hydraulic bridge punching cq cutting machine with forward and backward moving upper platen. Working area 600 x 2000 mm. Max oil pressure per cylinder 400 bar with a diameter of 185mm = 107 tons per hydraulic cylinder Guaranteed pressure force regardless of load location 100 tons Dimensions of the machine 320 x 170 x 190 cm Weight 4,500 kg Godpfxjud Rhvo Agbjil Machine is without oil; which has been drained upon removal All electrical documentation is complete; even warranty certificates for the Sick photocells from 1970 !

Condition: excellent (used), Year of construction: 2007, Pressing force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Lateral clearance: 740 mm Die height: 550 mm (ram down, adjustment up) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Features: • Siemens + Beckhoff control • 8-fold slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Siemens + Beckhoff control system • Beckhoff panel visualization • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safeties + 4 pcs. cam outputs • Ram with 20 mm wide central slot • Hydraulic tool clamping on table and ram • Hydraulic roll blocks for tool change Coil line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Coil width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive Gisdjv T Anlepfx Agbjl • Pneumatic disc brake • Hydraulic expansion by wedge segments • Rear support disc and 3 attachable limiting arms at front • Hydraulically actuated and driven hold-down roller, laterally adjustable by handwheel • Load carriage (stationary, decoiler moves hydraulically), lifting height 770 mm with 4 limiting bars Straightening machine Type: RMBMZ 50.600 UF Coil width: 40 - 600 mm Coil thickness: 0.5 – 4.0 mm Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Features: • Rollers hardened, ground and hard chromed • Drive of lower straightening rollers and feed rollers via gear transmission • Motorized roller frame adjustment, precision 1/100 mm, settings storable • Upper rollers ventable by 100 mm • Feed roller pneumatically ventable • Lateral strip guidance at entry with handwheel and leadscrew • Outlet roller basket and loop bridge • Loop control via ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roller Roll feed Coil width: max. 600 mm Features: • Rollers hardened, ground, and chromed • Driven by gear motor • Upper roller hydraulically ventable • Height adjustment hydraulic • Lateral strip guidance at entry with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feeder • Safety fence around the entire line • Decoiler and straightener on common base frame • Various spare rollers for straightener The complete line can still be inspected under power at the current owner's site!

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Godpfx Agsw Trkgobeil Exact details can be found in the PDF.

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 86053, total width: 1,950 mm, total length: 4,000 mm, total height: 1,800 mm, overall weight: 7,500 kg, type of input current: three-phase, input voltage: 380 V, working range: 48 mm, power: 9.56 kW (13.00 HP), control voltage: 24 V, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 350 mm, paper width (max.): 910 mm, paper height (min.): 290 mm, paper height (max.): 670 mm, Equipment: documentation/manual, lighting, Refurbished high quality flatbed die cutting machine from Italy with Spiess insert with steel insert plate with lateral adjustment, a left and right pull attachment (Spiess), double sheet detection, moving upper platen (WUPA system or Kama) with central pressure adjustment as with KAMA, but with the conventional intermittent pull gripper bar system with closing upper grippers. In other words: the sheet moves almost in a straight path through the machine; that is why this machine is ideally suited for lighter paper and cardboard types and is definitely an excellent intermediate step between a Heidelberg SBD and a medium format 40" die-cutting machine from Bobst, for example. No break-out, sheets are laid out directly on the pallet output after die-cutting. The output contains forks to place small format pallets on. Guaranteed pressure force is 200 tons. Stroke of the moving upper platen is 48 mm. Hardened die-cutting plate and device plate. This machine has hardly been used and is in excellent condition, however we have made modifications to further increase the ergonomics and operational reliability. Can be tested at our company and can be delivered with installation and warranty. The asking price is based on this. For all information in various languages, please open the PDF containing the original folder with explanation and specifications. Some specs: Maximum paper-cardboard size 67 x 91 cm Minimum paper-cardboard size 29 x 35 cm Gripper margin 6 to 14 mm Minimum paper weight approx. 80 -100 grs Maximum cardboard thickness 3 mm or 1.5 mm solid cardboard Stroke of the upper platen 48 mm Maximum rotation speed 4500 per hour Minimum rotation speed 1500 per hour Pressure force 200 tons Total power consumption incl. 80 m3 air pump 10 kW (13Hp) Total weight 7,500 kg The die-cutting section is transported separately from the Spiess insert and must be assembled. Godpov Nwwaefx Agbsil The electrical switch cabinet is fully plugged in with the components.