Used Punch Tool for sale (37,245)

Condition: used, Year of construction: 2004, Operating hours: Control on: 3123 h Machine on: 2970 h Program run: 902 h Spindle runtime: 988 h Technical data: Travel X/Y/Z: 650 / 500 / 450 mm Clamping area: 1000 x 600 mm Spindle taper: SK 40 Spindle speed: 12,000 rpm Table load max.: 400 kg Number of tool magazine positions: 20 Power: 24 kVA Machine weight, approx.: 5,500 kg Itodpfx Aewglapoh Neb Equipment: - Heidenhain iTNC 530 control - 20-position tool changer - Heidenhain tool probe - Heidenhain workpiece probe - Heidenhain handwheel - Menzel minimal quantity lubrication system - Approx. 25 tool holders

Condition: used, Year of construction: 1998, MACHINE WAS USED BY THE PREVIOUS OWNER SOLELY AS A PUNCHING MACHINE; THE LASER NEEDS TO BE CHECKED IF REQUIRED! Comes with TRUMALIFT SHEETMASTER 1606 TECHNICAL DETAILS Combined Punching/Laser Operation: 2,585 x 1,650 mm Punching Operation: 3,085 x 1,740 mm Laser Operation: 3,085 x 1,650 mm Performance Laser Power: 140 - 2,700 W Maximum Sheet Thickness: 8 mm Cutting Capacity – Mild Steel: 8 mm Cutting Capacity – Aluminum: 4 mm Cutting Capacity – Stainless Steel: 6 mm Maximum Punching Force: 220 kN Active Hold-Down (programmable in stages): 4.5 - 20 kN Maximum Workpiece Weight: 230 kg Speeds Max. Positioning Speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis Punching: 60 rpm Thread Forming: 180 rpm Stroke Rate Punching (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear Magazine: 18 tools with 3 clamps Tool Change Time: 1.5 - 5 s Ijdpjyar Dgofx Ah Netb Precision Position Deviation: ±0.10 mm Mean Position Scatter: ±0.03 mm Programmable Chutes for Punching and Laser Parts (max.) Size: 500 x 500 mm TRUMPF CNC Control: Siemens Sinumerik 840D (base system)

Year of construction: 2024, condition: like new (used), Great die-cutter (easy to operate), simpler than a cylinder :) automatic die-cutter Max. paper size: 1060 x 760 mm Min. paper size: 400 x 370 mm Itsdpfx Aoyarb Seh Njb Max. die-cutting size: 1050 x 750 mm Speed up to 7,500 sheets/hour Max. die-cutting force: 300 t Max. sheet thickness: corrugated board up to 4 mm, cardboard 0.1 - 1.5 mm

Condition: excellent (used), THERMAL TRANSFER PRINTING SYSTEM WITH PUNCH Itsdpfjvf Ig Dox Ah Nob (printing, laminating, punching) Equipment / Additional information: Car inspection stickers were last produced

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB MACH-ID 9188 Make: DEGEN Type: UTB Year: 2005 Iodpjx Tp Ahjfx Ah Nstb

Condition: excellent (used), Year of construction: 2006, Metal cutting Tooling KITAGAWA - 250 Horizontal: Yes Vertical: Yes Diameter: 230mm Tailstock: 3Mk indexing: 360.000° Centre height:180mm Control system:MAZATROL 640 M Length: 500mm Ijdpjx Tpzkofx Ah Nstb Width: 400mm Height: 300mm Weight: 50kg

Condition: good (used), Tool cabinet with sliding doors Width: 2000 mm Depth: 500 mm Height: 1200 mm Shelf depth: 400 mm Iodpfxsx Tphkj Ah Netb Key included The cabinet is old but sturdy The sliding doors operate flawlessly!

Condition: ready for operation (used), Year of construction: 2005, operating hours: 17,200 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, cutting range flat at 90° (X-axis): 2,500 mm, cutting range flat at 90° (Y-axis): 1,270 mm, AMADA EM2510NT CE (2005) | 20t CNC Turret Punch Press | NT Semi-Automatic | PLN 180,000 net For sale: AMADA EM2510NT CE CNC turret punch press from 2005. The machine is fully operational, currently in continuous use, and can be powered on and tested on site. CE version. ⚠️ Sale includes the machine only – WITHOUT TOOLS ✅ Key information: • Manufacturer / Model: AMADA EM2510NT CE • Year of Manufacture: 2005 • Type: CNC turret punch press • Punching force: 20 tons / 200 kN • Operating hours: 17,200 h • Condition: fully functional, ready for operation • Last inspection: November 2025 • No faults/alarms on the controller • Machine testing available on site _____ ✅ Technical specifications: • Working area: 2500 × 1270 mm Itjdpfx Ahjyapzco Nob • Sheet re-positioning: up to 5000 × 1270 mm • Max. sheet thickness (mild steel): 3.2 mm • Control: AMADA • Tool turret _____ ✅ Automation (NT) Machine equipped with NT system – semi-automatic: • streamlines sheet feeding/positioning • increases production efficiency ⚠️ Note: This is a semi-automatic system (not full automatic loading/unloading). _____ ✅ Scope of supply: ✔ AMADA EM2510NT CE punch press ✔ complete, operational machine with fixed auxiliary equipment ✔ documentation/manuals NO TOOLING (tooling is not included in the sale) _____ ✅ Application Ideally suited for: • sheet metal component production • perforation and technological hole punching • enclosures, covers, panels, control cabinets • parts for welding and bending _____

Condition: good (used), Year of construction: 2010, machine/vehicle number: 11176, Offer 25439 Technical data: - Abrasive diameter: 150 mm - Swivel head – grinding unit pivotable and tiltable on articulated arm - Dust drawer - Disc speed infinitely adjustable - Table dimensions: 1400 x 980 mm - Table height approx.: 870 mm - Drive: 400 V / 0.75 kW Iodpfx Ahsyapx Ue Netb - Pneumatic connection: 6 bar - Space requirement approx.: W 1700 x H 1700 x D 1300 mm - Weight approx.: 400 kg

Condition: excellent (used), Turning tools with rotating cutting plate Itedpfx Ahsd Hflas Neb Type: RRSDR 3232P12 Make Mitsubishi Length 165 mm

Condition: used, Tool measuring instrument Isdpsddtuysfx Ah Njtb Make Mitutoyo Type quick set R

Year of construction: 2019, condition: as good as new (ex-display), Rolling burr tool Itedpofgwt Eefx Ah Njb Make Gleason - Hurth Type:CH7M5R - 7B340-B1A 200 mm diameter unused is delivered in a wooden box Weight 9,5 kg

Condition: excellent (used), rotating centre punch make Röhm MK 6 1 point 60 degrees 1 point 90 degrees total length 340 mm weight 8,5 kg Itjdpsgviq Nefx Ah Nsb

Condition: used, Spindle-out tool Make Kelch Diameter center hole 60 mm Steel cross section 34 mm square Iedpfx Ascp Azxjh Nstb diameter hole circle for fixing hole 102,5 mm Length 450 mm width 135 mm Height 105 mm

Year of construction: 2010, condition: excellent (used), Spindle tool in wooden case Iodef Dx Srepfx Ah Njtb Make IGP Spindle mount Mk 4 maximum spindle range 200 mm Weight 6,8 kg

Condition: good (used), Incl. approx. 140 dies Itjdpeyapl Isfx Ah Nob Technical data: Punching force: 500 kN Stroke: 32 mm Continuously adjustable stroke: 10–32 mm Strokes at 10 mm stroke: 35 min⁻¹ Throat depth: 510 mm Working height to die: 1070 mm Installation height: 350 mm Punching table width: 255 mm Punching capacities with standard punching attachment and table: Ø 31 mm in 12 mm material with universal punching saddle: U-beam, web: 100–300 mm I-beam, web: 80–300 mm U-beam, flange: 100–300 mm I-beam, flange: 80–300 mm Punching capacities with special punching attachment SV 58 / 65: Ø 58 mm in 7 mm material / Ø 65 mm in 6 mm SV 90: Ø 90 mm in 4 mm SV 130: Ø 130 mm in 3 mm Machine data: Rated power: 4 kW Oil capacity: 45 l Net weight (incl. oil): approx. 1,320 kg Machine dimensions (L × W × H): 108 × 65 × 168 cm

Condition: used, Year of construction: 2003, max. grinding diameter 5-50 mm grinding length 350 mm workpiece length 50-300 mm diameter 5-50 mm current capacity 70 kVA weight of the machine ca. 9 t dimensions of the machine ca. 3300x2950x2400 m Power supply: 400 V/50 Hz Power: 70 kVA Fuse protection: 3X125A Conductor cross-section: 5X25 mm² Cu Workpiece diameter: ? 5-? 50 Workpiece length: 50-300 - Manual loading and unloading - External fully automatic loading device - Workpiece spindle stock fixed on grinding table Workpiece spindle unit: Itodpfxsyan R Ns Ah Nob Dimensions: ? 135 x 400 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: with HF motor Special mount: Junker standard collar ?75 mm Max. speed: 6000 min. -1 Tailstock: Longitudinal adjustment: manual Turning center: Junker standard collar ? 48 mm (?75 mm) Grinding table: Feed: Z-axis Grinding headstock: Feed: X-axis Horizontal swivel: B-axis HF grinding spindle unit I, II, III Dimensions: ? 165 x 350 mm Flange: ? 190 mm Standard collar: ? 127 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: 8 kW Balancing: Electronic Speed max. 8800 min -1 Grinding wheel I, II, III Type: Borazine (CBN) ceramic bonded Diameter: ? 350 mm Bore: ? 127 mm Coating width: max. 5 mm (standard) Peripheral speed: max. 140 m/s

Condition: used, Year of construction: 2017, max. grinding diameter 250 mm grinding length 500 mm workpiece length 550 mm weight of the machine ca. 8,5 t dimensions of the machine ca. 2789x2525x2400 mm Number of CNC axes (X/Y/Z/A/B/C): 5 to 6 Travel distances (X/Y/Z) [mm]: 630 / 345 /430 Ijdpjyan I Uofx Ah Nstb Max. speed (X/Y/Z) [m/min]: 30 / 30 / 30 Swivel angle of grinding spindle +/- (C-axis): -225° to 70 Drive power of grinding spindle [kW]: 11 / 11.5 / 21 Speed range of grinding spindle [min-1]: 0 to 8,000 / 18,000 / 30,000 Grinding wheel diameter [mm]: 250 Abrasives All abrasives Grinding length [mm]: 500 Workpiece length [mm]: 550 Workpiece cutting diameter [mm]: 260 Workpiece spindle mounting cone: SK50 / HSK80/63/50 / Form A and E Control: Sinumerik One

Condition: used, functionality: fully functional, 16-piece set of window tools IV 68 (suitable for round arches), little used Itjdpoyanq Nsfx Ah Nob

Condition: used, Year of construction: 2011, functionality: limited functionality, machine/vehicle number: 782, Technical characteristics: Measuring Capabilities - Measuring range (Z-axis): 600 mm (≈ 23.6") - Measuring range (X-axis): 200 mm (≈ 7.8") - Max. tool diameter: 400 mm (≈ 15.7") - Snap gauge diameter: Up to 100 mm (optional) Performance Features - Spindle type: High-precision SK50 spindle with integrated calibration surfaces - Spindle locking: Power-operated brake with 4 × 90° indexing - Image processing: ZOLLER »pilot« software (version 3.0) - Camera: CCD with telecentric lens and 20× magnification - Cutting edge detection: Automatic, including edges >90° - Focus system: Analog focus display with dynamic cross hairs Iedpoyanf Tjfx Ah Njtb Control & Interface - User interface: Touchscreen with graphical guidance - Manual control: Ergonomic »eQ« single-hand operating handle - Fine adjustment: Electronic control for X and Z axes - Data transfer: RFID tool identification, label printing, and CNC integration Construction & Environment - Frame: Lightweight metal with optimal thermal conductivity - Scales: Heidenhain glass scales for high measurement accuracy - Software options: Tool management, adapter calibration, concentricity/run-out programs - Mounting/Measurement interfaces: # HSK63 # HSK100 # ISO40 # ISO30/BBT30 # BMT55 Machine status: FUNCTIONAL in manual mode only. For optimal performance, overhaul by the machine supplier is recommended.

Condition: used, various tool changing consoles / die loading arms available: 070022 GUETHLE-SWT CT 16/1600 (16 t / 1600 mm) with support leg (2x) 180006 GUETHLE-SWT CT 6/2700 (6 t / 2700 mm) with support leg (2x) 210008 GUETHLE-SWT CK t / 1000 mm) (2x) 210009 GUETHLE-SWT CK t / 1000 mm) (2x) 180010 unknown (2 t / 1500 mm) with support leg (2x) 190002 GUETHLE-SWT CT t / 1000 mm) with support leg (2x) 220019 GUETHLE-SWT CT 2/1000 (2 t / 1000 mm) with support leg (2x) 180002 GUETHLE-SWT CK 2/800 (2 t / 800 mm) (2x) Itjdpfxsxddqfs Ah Nob 090054 GUETHLE-SWT CS 2/800 (2 t / 800 mm) swivelling (2x) 180003 GUETHLE-SWT CK 1/800 (1 t / 800 mm) (2x) 230001 Hydrap (1 t / 800 mm) (2x) 070023 Dimeco T.C.F. ,5 t / 500 mm) (2x)

Condition: used, functionality: fully functional, Year of construction: 2018, TRUMATIC 6000 FIBER (K06) LARGE FORMAT + SHEETMASTER + GRIPMASTER Ijdpfx Aoyambash Nstb Year of manufacture: 2018 Laserpower: 3kW fiber Additional functions, MACHINE: Punching quality package Forming package MultiTool function Engraving function SoftPunch function Die spray lubrication with level monitoring Descending die Integrated flattening function Smart punch monitoring Additional clamp 1 pc Individually opening clamp 4 pc Repositioning cylinder Vibration damping Brush tables with loading and unloading aid Warped sheet detection Wireless Operation Point MDA interface Additional functions, SHEETMASTER: SheetMaster 3000 x 1500 mm (AK04) Loading station with fanning magnet Unloading platform Loading and unloading parallel to production Peeling system including positioning aid for large-sized sheets Additional positioning aids for medium-sized sheets Additional positioning aid for small-sized sheets First additional suction package Second additional suction package Unloading monitoring of laser cut parts Additional functions, GRIPMASTER: GripMaster 3000 x 1500 mm Parts conveyor belt for punch & laser side

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 34835_20_28, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces Iodpfxjx Atr Ao Ah Notb - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 3483520_28, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B Iodpjx Atrijfx Ah Notb L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 34835H_2027, Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1600mm, 450kg Itsdpfx Aox Attyoh Njb -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 1450mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 5 pieces / completely continuous