Used Puller for sale (111)

Condition: used, Year of construction: 2015, operating hours: 23,000 h, clamping force: 450 kN, screw diameter: 70 mm, clearance between the columns: 810 mm, column diameter: 70 mm, displacement volume: 1,239 cm³, injection pressure: 199 bar, injection weight: 1,127 g, installation height: 850 mm, 4 core pullers; 70 mm bimetallic screw Bcjdpfjxxxa Rsx Aafsu

Condition: used, dia. of draw-in collets 4 - 24 mm max. radius to grind 12 mm grinding range 4 - 24 mm Bodpov Dxzpefx Aafscu grinding wheel-diameter 100 mm total power requirement 0,4 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1 x 0,6 x 0,4 m Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel. Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2025, New MW2000 / NX-5 model with 360° hydraulic rotator. Self-propelled pile driver for PV farm posts by Mazaka, 9.15 m mast, DEUTZ 85 kW engine! MAZAKA MW2000 / NX-5 • Engine – DEUTZ, Stage V emissions standard • Engine power: 85 kW • Noise level: 109 dBA • Steel tracks HAMMER • Model: MZK65, 1650 Joules • Impact rate: 350-700 blows/min • Oil flow: 70-100 L • Hammer weight: 750 kg HYDRAULIC SYSTEM • Oil tank: 200 L • Oil flow rate: 50-100 L/min • Oil pressure: 225 bar • Fuel tank: 120 L UNDERCARRIAGE SYSTEM • Speed 1: 2 km/h, speed 2: 4.4 km/h MAX. POST HEIGHT • Post height: 9,150 mm • Side shift: 100 - 100 mm • Pile cap: 145 x 95 mm included in the machine price (other sizes available at extra cost) Bedew Rvlvepfx Aafscu TRANSPORT DIMENSIONS • Height: 2,280 mm • Width: 2,280 mm • Length: 3,600 mm • Weight: 7,950 kg • Ground clearance: 500 mm • Mast tilt: +20° / -150° • Side tilt: +15° / -15° 360° ROTATOR • Rotation speed: 0 - 5 rpm • Hydraulic rotator system Net retail price including transport: €215,000.00 Optional equipment (at extra charge): • Automatic levelling system – €4,400 net • Post puller – €2,200.00 net • Rock, concrete, and asphalt auger complete with 203 mm / 6-inch bit and DTH mounting bracket – €18,500 net

Condition: new, functionality: fully functional, Year of construction: 2025, Brand new, self-propelled solar pile driver by Mazaka. The model is designed with a compact chassis – making it ideal for transport and intensive use. Mazaka is a brand recognized by professionals throughout the EU, USA, and Canada. ONE UNIT AVAILABLE IMMEDIATELY FROM STOCK. DISCOUNT POSSIBLE! CONTACT US FOR DETAILS. MAZAKA Self-Propelled Pile Driver MW1200 CW Engine Brand: YANMAR TIER 5, 35.4 kW, Bcsdpfjw Rvinex Aafsu Model: 4TNV88C-YDEH2 / EU Stage V Noise level: 108 db Hammer Model: MZKK65 – 1,450 Joules Blow rate: 350–700 bpm Hammer weight: 750 kg HYDRAULIC SYSTEM Oil tank: 150 L Oil flow: 50–100 L/min Working pressure: 180 bar Fuel tank: 50 L MACHINE SPEED Speed: 2.2 – 4 km/h PANEL HEIGHT Maximum panel height: 6,100 mm Side shift Standard pile head template (other profiles available on request): 125–125 mm / 100–60 mm DIMENSIONS Height: 2,770 mm Width: 2,290 mm Length: 3,660 mm Weight: 4,750 kg Mast tilt: +10° to -63° Side tilt: +10° to -10° FUEL CONSUMPTION Diesel: 2.5–3.5 l/h Retail price including transport Net: €101,000 Optional equipment at extra cost: • Automatic leveling system – €4,100 net • Post puller – €2,000 net • Additional pile head template per buyer’s technical drawing – €1,600 net • Rock, concrete, and asphalt auger with 203 mm bit and DTH 6" mounting kit (drilling depth approx. 1,650 mm in 5–10 min): €16,000 net. Note: Rock drilling requires a 14 bar / 14 m³ compressor (not included). • Auger for soft soil (150 x 1500 mm or 200 x 1500 mm) with rotary head, complete – €4,500 net

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 Bcedsw Tt R Iepfx Aafju - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse.

Condition: good (used), Year of construction: 2004, ENGEL DUO 4550/700 Origin: ENGEL St. Valentin, Austria 🔧 CLAMPING UNIT 1. Clamping force: 7000 kN 2. Opening force (with pressure pads): 510 kN 3. Opening stroke: 1350 mm 4. Minimum daylight: 450 mm 5. Maximum daylight: 1900 mm 6. Minimum mold height: 450 mm 7. Maximum mold height: 950 mm 8. Distance between tie bars (H × V): 1465 × 1360 mm 9. Mold plate size (H × V): 1025 × 990 mm 10. Ejector stroke: 250 mm 11. Ejector force: 63 kN 12. Dry cycle time (Euromap 6): 3.6 s (Z) / 2.4 s (Stroke) 🔩 INJECTION UNIT 1 Bedpjwnqk Nofx Aafjcu 1. Screw diameter: 90 mm 2. Max. shot volume: 3180 cm³ 3. Max. shot weight (PS): 2880 g 4. Injection pressure: 1470 bar 5. Injection speed: 100 mm/s 6. Plasticizing capacity (3-zone screw): 270 g/s 7. Plasticizing capacity (barrier screw): 308 g/s 8. Injection flow rate: 465 cm³/s 9. Heating zones: 7 10. Installed heating power: 75 kW 11. Hydraulic pump drive: 100 kW Engel Linear Robot ERC53/1-E 22 Hotrunner 4 core pullers PC, ABS material

Condition: excellent (used), Year of construction: 2010, Clamping force: 110 t Tie bar distance: 470x420 mm Bcsdpfxju Ekaqe Aafeu Min Mould height: 275 mm Max Mould height: 775 mm Platen size : 680x663mm Screw diameter: 22 mm Shot volume: 41 cm3 Opening force: 55 kN Opening path: 500 mm Correct injection pressure: 2864 bar Nozzle pressure: 47 kN Path of the pant : 250 mm Forward ejector force: 41,2 kN Reverse: 26,4 kN Max. mold weight : 1000 kg min. tool diameter: 315 mm Working hours: 70.000 h Type: Horizontal Drive: Hydraulic Unilog B6 controll Air Valve Core puller Euromap 67

Condition: good (used), Year of construction: 2004, Demag Concept 125/475-320 Clamping force: 125 tons Bcjdoxd Sz Espfx Aafou 2 x core pullers on movable platten \+ Robot Demag W621-1831: X-550, Y-1000,Z-2000 (2004)

Condition: new, Year of construction: 2025, Empty weight: 2.500 kg General condition: very good Technical condition: very good Visual appearance: very good Reference number: 3 Fits to following machines: 18-35ton Delivery terms: EXW Production country: KR Please contact Ö. Inalkac for more information We offer you new AJCE AVH30ST Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 18-30TON Weight: 2400 kg Working pressure: 180~ 200Bar Oilflow: 200 l/min Centrifugal Force : 450 kN Frequency: 2700 rpm Eccentric moment: 4 kgm Bcjdjq Ixukopfx Aafsu AVH30ST is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H,I Beams Cheaper , Solar Pile, Safer, Quicker than traditional Pile 30ST is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: new, Year of construction: 2025, Weights Empty weight: 1.800 kg Bsdpsq Ixuvsfx Aafjcu Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 2 Other information Fits to following machines: 20-35ton Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We can offer you new excavator mounted Pile driver- Pile Hammer, Vibro Pile hammer, Vibratory pile driver, Vibratory Hammer. This model AJCE AVH30 fits on excavator class 20-35 ton. You don't need Power Pack, that will save you money! The weight is 1800kg. It will be delivered together with special extention boom to connect on the excavator. You can see it on the photos. We have also Side Grip type vibrohammers available. Contact us for details. We can ship worldwide. - Vibrofonceur Vibrohammer Piledriver Vibro högförare battipalo возач гомиле conductor de pila pilot hromady cölöpverő Rammbock haugesjåfør bate estaca sonetă ciocan vibro martelo vibro vibrohammer martillo vibratorio vibro marteau Vibrationshammer čekić vibro młot wibracyjny vibro plaktukas вибромолот вибро чук

Condition: new, Year of construction: 2025, Weights Empty weight: 3.300 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 4 Other information Fits to following machines: 28-45TON Delivery terms: FOB Transport dimensions (LxWxH): 250015001,2 Production country: KR Bedev Nhv Hspfx Aafscu Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH40ST Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 28-45TON Weight: 2800 kg Working pressure: 180~ 220Bar Oilflow: 200 l/min Centrifugal Force : 602 kN Frequency: 2700 rpm Eccentric moment: 6 kgm AVH40ST is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H,I Beams Cheaper , Solar Pile, Safer, Quicker than traditional Pile 40ST is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: like new (used), Year of construction: 2017, Vertical Arburg Schiebetisch 375 V 500-100 (2017, working hours: 19.719) Clamping unit: 50 ton Oppening stroke (max. kN/mm) : 30 / 250 Mould height (fixed/variable) min.-max. mm: ---/172/272 Platen daylight (fixed/variable) max. mm: ---/422-522 Shuttle table stroke: 650 mm Screw diameter: 20 mm Injection volume: 31 cm3 Shot weight: 29 g Injection pressure: 2.500 bar Bjdpfeu Ep Imex Aafocu Working hours: 19.719 Equipment: 3x hot runner 1x hydraulic core puller 1x pneumatic core puller

Condition: reconditioned (used), Year of construction: 2006, 160 tons Krauss-Maffei injection moulding machine built in 2006 with Sepro robot and transport-belt. Screw diameter 35 mm, 2 core pullers, 6 hot runner zones. This machine will be delivered " reconditioned " and can be shown under power ! Bjdpfx Aeh Dh Duoafscu

Condition: good (used), overall weight: 10,364 kg, Year of construction: 2019, 2019 GENERAL BROACH 10-30 GBTU VERTICAL TABLE UP BROACH Equipped with: Retriever Shuttle Table Chip Conveyor Auto Load Grayco Lube Bedpfjrtrzaex Aafecu AB Panelview Coolant Tank & Pump Specifications: Capacity: 10 Ton Stroke: 30" Table Up 1″ Puller / Retriever Hydraulic Power Unit Chip Conveyor Machine Dimensions (approx.): 165″ x 48″ x 60″ Machine Weight Total (approx.): 22,800 lbs. Machine Column (approx.) : 13,000 lbs. Base w/ Chip Conveyor (approx.): 4,700 lbs. Electrical Panel (approx.): 600 lbs. Hydraulic Power Unit (approx.): 4,500 lbs.

Year of construction: 1978, condition: good (used), U.S. MODEL 50TX120 VERTICAL PULL DOWN BROACH Equipped with: Retriever Puller Hydraulic System Coolant System Chiller Chip Conveyor Manuals Specifications: Normal Broaching Capacity: 100,000 Lbs at 922 PSI Peak Force Capacity: 133,600 Lbs at 1350 PSI Main Slide Stroke (Bump Inches): 106 Maximum Cutting Speed: 20 Ft/Min. Bjdpfx Aaertrzlsfscu Maximum Return Speed: 40 Ft/Min. Main Pump Motor: 75 HP at 900 RPM Hydraulic Reservoir: 365 Gallons Handling Pump Motor: 10 HP at 1200 RPM Coolant Pump Motor: 1.5 HP at 1800 RPM Coolant Pump Capacity: 100 Gallons / Min at 23 Head Ft. Coolant Reservoir Capacity: 600 Gallons Approx. Floor Space ( Width x Depth x Height): 65" x 96" x 243" Net Weight, Approximate: 79,000 #

Condition: used, Year of construction: 1998, Clamping force: 60 t Screw diameter: 30 mm Shot weight: 96 g Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Shot volume: 106 cm3 Bcsdpfx Aajvurhqjfju 1 x core puller Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 2001, Clamping force: 250 t Screw diameter: 70 mm Distance between tie bars V: 630 mm Bcsdpfjvbbvksx Aafju Distance between tie bars H: 630 mm Core pullers: 2x Air valve: 1x Type: Horizontal Drive: Hydraulic

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 2,200 mm, total width: 3,400 mm, total length: 2,400 mm, overall weight: 4,500 kg, compressed air connection: 8 bar, warranty duration: 12 months, working width: 2,400 mm, infeed height: 1,000 mm, Equipment: documentation/manual, Technical characteristics: CAPACITY: up to 1200 boxes per hour PULLER SPEED: up to 3m/s INSTALLED POWER: 23 kW CARDBOARD TYPE: single, double and triple wall up to 14mm and 1400GSM in standard option and HD cardboard over 2000GSM per request. MAXIMUM BOARD SIZE: 2400mm X 7000mm Bjdofivfyjpfx Aafscu MINIMUM BOARD SIZE: 300mm width x 650mm length DISTANCE BETWEEN SLOTTING KNIVES: 50mm – 2200mm (500mm segmented slotting knives) WIDTH OF SLOT: 8mm Handholder tool x 1 - The unit is positioned automatically and the distribution of cuts is also setup digitally via control unit. The total force the die cut can exert is 5200 Newton. Creasing Wheels x 4 - The machine has four creasing wheels and it is possible to use only the selected wheels, i.e. not crease the full length of the cardboard. Knife tool x 2 - The knives are made of high density steel alloy which allows processing 1400 GSM, and they are positioned automatically. The transversal creasing tool is integrated in the knife sub-frame. The knives are segmented and can be positioned independently from one another. Cross cutting tool x 1 - The module is also utilized for production of pallet boxes with loading flap. The unit can produce transversal cuts anywhere on the sheet, which enables it to create box locking mechanisms, loading flaps and windows on the box. In combination with longitudinal cutting knives, square and rectangular shapes can be cut out in the sheet, effectively replacing die cutting for those forms. Circular blades x 6 - This unit can perform work selectively and anywhere along the length of the corrugated sheet. The unit is utilized when producing FEFCO 0204, FEFCO 0403, glue flap or material reformatting. Also, in combination with cross cut, windows and similar square/rectangular shapes can be cut. Printing unit x 1 - The printing unit is capable of outputting single color prints of up to 1000mm of width and 870mm in length, making it the perfect choice for standard transportation box markings. The imprint can be placed anywhere on the box, including creased areas - positioned automatically. Gluing module unit x 1 -.. The unit is servo powered and moves at speeds up to 1m/s. The glue can be dispersed in lines or in beaded patterns anywhere along the corrugated cardboard sheet. This module is powered by NORDSON adhesive systems. Control unit - 21 inch touch sensitive HD widescreen color display with user friendly UI. The unit itself comes with predefined FEFCO standard models in memory. Warranty 12 months, provided training and support for services and parts.

Year of construction: 2024, condition: new, MRB-S Series Technical data (see pictures) Standard equipment CE Conical bend Motorized back roller Additional control panel for upper and lower rollers which are operated with landing gear. SAE 1050 steel rollers Induction hardened rollers, Relaxed steel construction, at 2.5 and 3m Machine supports, brake system for precise bends, Digital display. Motorized back roller with puller Optional equipment Motorised under-roller mounting, ground rollers Extended rolls for profile bends, Special rollers for profile bending, Special packaging for international deliveries. MRB series: Technical data (see pictures) Standard equipment CE standard Digital display Conical bend Motorized back roller with tightening Additional control panel for upper and lower rollers, which are operated with landing gear. operated by landing gear. SAE 1050 steel rollers, Induction hardened rollers, Relaxed steel construction, Braking system for precise bends. Optional equipment Motorized bottom roller with suit, stone rollers Extended rolls for profile bends, special rollers for profile bending, Special packaging for international Programmes Bcsdpfx Aefin E Djafou Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal working machines all over the world and is headquartered in Türk

Year of construction: 1988, condition: excellent (used), New entry hydraulic surface grinding machine Z&B Ziersch FS 2045 T Bj.88 Bedek Ufz Njpfx Aafscu grinding area 500 x 200 mm - vertical dividing gear - my-Tipp- feed - electronic handwheel - autom. feed - digitalaz. automatic cross feed, continuous and intermittent, micro-fine adjustment cross - magnetic plate with demagnetization hydr. overhead puller - adjustable feet - machine checked through - all functions there - runs very nice ! Pricing; ex stock - subject to prior sale and error.

Condition: excellent (used), Also, a large rotary hook together with the special needle feed transport system with double roller (puller) permits to hem perfectly pants, jeans and jackets in any fabric. The machine is of superior quality, recommended for all types of workshops as well as for factories with medium and large productions. When purchasing this machine, you have a 1 Year warranty and a 5-year post-warranty. Worldwide Delivery ! We always have more than 1000 machines in stock so that each customer can choose from several options. 
With over 20 years of experience in the textile industry and over 10,000 satisfied customers, we make sure that your plans become successful businesses!. Bodpfx Aelzkibeafecu

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: KAP1, air demand: 16,000 m³/h, power: 36 kW (48.95 HP), suction capacity: 16,000 m³/h, Equipment: cabin, Dielectric automatic powder booth KAP1 Price: PLN 492,693.30 + VAT Electrical and energy data • Voltage: 400 V (3P + N + PE) • Power connection: 36.34 kW • Pneumatic connection: 1" • Air pressure: min. 6 bar • Air quality: oil < 0.1 mg/m³, water vapor < 1.3 g/m³ • Air consumption: 1710 Nl/min (operation) • Compressor: SC-30 • Air tank: 1800 L Painting parameters • Painting speed: 1933 mm/min • Part dimensions: 800 x 1800 mm • Hanger height: 500 mm • Coating thickness: 100 µM • Gun array: vertical Bsdpfx Aaov Rpx Sjfecu Technical data and configuration • Design: dielectric plastic • Passage dimensions: 1000 x 2400 mm • Air flow: 12348–16000 m³/h • Powder center: ProfiCenter CP02 • Manipulators: 2 pcs. • Guns: 8 automatic, 2 manual (ProfiSpray) • Part detection: yes (height, width) • Systems: cyclone separator, ProfiControl, beam pulling • ATEX: zone 22, II 3D Platforms and cabin body • Platforms: entry, exit, stainless steel floor, anti-slip stairs • Housing: dielectric plastic, LED lighting, slots for manipulators Air knives and suction channel • Automatic floor cleaning • Suction channel with pneumatic flap Gun blow-off and control • Automatic blow-off guns • 10" touch panel, 50 programs, manipulator control, dust extractor, drive speed X-axis and part pulling system • Automatic gun setting • Part pulling: speed 570–2830 mm/min, 2 pullers The machine also includes: • ProfiSpray A applicator • PSS-1 controller • PM-1 guns • ProfiCenter CP-02 powder center • CK-D1400L cyclone dust extractor • MA1-180 manipulator and MX1-10 X-axis • OZ-12H dust extractor • ProfiControl 10" control • BP-H2000 W900 part measuring system

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical Data Product number M400-4 Manufacturing year 2009 Height of passage 150 mm Passage width 320 mm Plastic Stainless steel and plastic approved for food contact Power 1.5 kW Power 400 V / 50 Hz Air pressure 8 bar Length 1420 mm Width 650 mm Height 1720 mm Weight 220 kg Machine in perfect condition very little used M400-4 meat tenderizer Josef Koch AG presents the latest evolution in the Pökomat range. The new Steaker is based on the proven and reliable Pökomat technology. It is an efficient and user-friendly solution for the meat industry that meets the demand for softening automatically portioned meat. This machine combines high performance with operation and maintenance. Key features of the M400-4: 396 or 536 precision-sharpened, robust stainless steel knives Two easily replaceable knife supports 10 pneumatically adjustable clamping and pulling units very gentle product processing polyurethane belt-puller removable without tools Bsdpovimftsfx Aafecu intelligent clamping system easy cleaning, hinged carrying system mobile on two polyurethane wheels frequency controlled processing speed holder for storing and changing knives

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, For sale is a fully functional and highly precise GILDEMEISTER CTX 200 CNC lathe, manufactured in 1995. This machine is renowned for its high repeatability, speed, and accuracy, making it ideal for automatic turning operations. It is sold with a comprehensive set of tooling, allowing for immediate commencement of work. Machine Data: ● Model: GILDEMEISTER CTX 200 ● Year of Manufacture: 1995 ● Condition: Fully functional, very accurate, repeatable, and fast ● Maximum Turning Diameter: 210 mm ● Maximum Turning Length: 350 mm ● X-axis Travel: 160 mm ● Tool Magazine Capacity: 12 pcs. ● Minimum Spindle Speed: 25 rpm ● Maximum Spindle Speed: 5000 rpm ● Spindle Bore: 42 mm ● Tool Holder Type: VDI 20 ● Control Language: English ● Operating Hours: 79,000 h ● Additional Equipment: Chip conveyor Included with the Lathe: Full Tooling Package: ● VDI20 tool holders ● External turning tools ● Boring bars ● Compensating tap holder for threading ● Large quantities of taps, drills, dies ● Numerous packs of interchangeable inserts (for every tool type) ● 3x modular drills ● Bar puller (for automatic operation) ● Set of soft jaws for the chuck ● Complete set of ER25 and ER32 collets from ø2 to ø15 Purchase Information: ● Transportation and loading: Buyer's responsibility Bedpfxowm Hh Uj Aafecu ● Reason for Sale: Business closure

Condition: used, Schulz hydraulic portal press type H26 buy used Machine data: max. pressure 1500 kN (150 tons) Main motor 55kW Bodpfx Aaevxtrxjfecu Cooling system motor 3kW Rexroth hydraulic system Tool plate dimensions 850x760 mm