Steering wheel

AJCE AVH30 Sheet Pile Vibro Hammer Pile Driver

Condition: new, Year of construction: 2025, Empty weight: 2.500 kg General condition: very good Technical condition: very good Visual appearance: very good Reference number: 3 Fits to following machines: 18-35ton Delivery terms: EXW Production country: KR Please contact Ö. Inalkac for more information We offer you new AJCE AVH30ST Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 18-30TON Weight: 2400 kg Tsdpfx Asq Ixuksdnef Working pressure: 180~ 200Bar Oilflow: 200 l/min Centrifugal Force : 450 kN Frequency: 2700 rpm Eccentric moment: 4 kgm AVH30ST is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H,I Beams Cheaper , Solar Pile, Safer, Quicker than traditional Pile 30ST is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Year of construction: 2011, operating hours: 5,900 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Tsdpfjh Tyydox Adnof ICE 28 RFS + Power Pack 525 RF Year of man. Vibrator 2011 Power pack 2004 Very good working condition More details on serious require

Condition: new, Year of construction: 2024, Weights Empty weight: 2.500 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 2 Other information Tsdsq Ixr Eepfx Adnjf Fits to following machines: 18-38ton Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH30TT Tilting type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 18-30TON Weight: 1950 kg Working pressure: 180~ 200Bar Oilflow: 200 l/min Centrifugal Force : 450 kN Frequency: 2700 rpm Eccentric moment: 4 kgm AVH30TT is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes, HI Beams Cheaper , Solar Pile, Safer, Quicker than traditional Pile 30TT is Robotic Pile Drivers with Tilting option and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile .

Condition: new, Year of construction: 2024, The SCHORR RR500 DHKB 2 PRO track dumper is a versatile machine powered by a powerful 270 cm3 4-stroke petrol engine with 9.2 hp. This power enables the dumper to operate effortlessly even in outdoor applications and offers sufficient power for demanding tasks. Advantages of the SCHORR RR500DHKA2 track dumper: -- Powerful 9.2 hp four-stroke engine -- Robust chain drive for high traction -- 500 kg payload -- Removable side walls for more loading volume -- Automatic opening of the front when tipping -- Folding ride-on platform as standard -- 6 forward and 2 reverse gears The box body made of robust sheet steel is equipped with removable side walls so that the loading area can be flexibly enlarged and tipping operations are possible without any problems even on slight inclines. A generous tipping angle ensures that even fully loaded skips can be emptied completely without the need for manual assistance. A major advantage of the dumper is the automatic opening of the front of the tipper body during the tipping process. This ensures particularly easy and convenient unloading, even when fully loaded. The hydraulic tipping drive enables the tipper body to be raised and lowered effortlessly, while the extra-large hydraulic oil tank with integrated oil filter extends the service life of the machine and reduces maintenance requirements to a minimum. The powerful track drive ensures that even uneven terrain, inclines and kerbs can be mastered with ease. The durable rubber tracks provide a secure footing in any working environment. Technical data: Manufacturer (abbreviation): SCHORR Tjdpfx Adju Th Ekonjf Type designation of the manufacturer: RR500 Model: DHKB2 Load capacity: 500kg Tilt drive: Hydraulic (stepless) Travel drive: Chain Weight without/with packaging: 305kg / 335kg Drive system Engine: Air-cooled 1 cylinder four-stroke engine (OHV) Starter: Reversing starter Power: 9,2PS Gearbox: 6 forward gears / 2 reverse gears Speed: forward gear Forward gear: max. 8km/h Reverse gear: max. 5 Liquids Fuel tank capacity: 6L (unleaded petrol) Hydraulic oil tank capacity: 3L (ISO VG 32) Transmission oil capacity: 1.5L (SAE 80W-90) Engine oil tank capacity: 0.9L (15W-40) Basic dimensions Overall length platform folded: 1870mm Overall length platform unfolded: 2105mm Overall width (incl. chain): 770mm Overall height: 1050mm Container dimensions (inside): 1040 x 700 x 300mm Container dimensions (outer dimensions): 1100 x 755 x 310mm Load volume (painted): ~ 218L Load volume (heaped): up to 500L (depending on load) Drive chain dimensions: 180 x 60 x 38mm Packaging size: 1600 x 770 x 1270mm Filling height with walls: 740mm without: 445mm It goes without saying that all spare parts are always in stock and available quickly if required. If technical support is required, our trained team is at your side. We can also carry out repairs for you in our own workshop. We at SCHORR will be happy to answer any questions you may have about our motorized wheelbarrows. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Tedpfxsppyhto Adnsf Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Year of construction: 2010, operating hours: 13,500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information ABI TM 14/17 V Year 2010 CAT Engine / 470 kW Base carrier : Sennebogen SR 35 T Aux Winch Vibrator MRZV 24VV Todpfx Adoh Tyylenef Pre drilling rotary available Good working condition!

Condition: repair required (used), Year of construction: 1987, Gyratory crusher Model 1500 fine chamber Requires change axial bearings rest of machine in good condition. Can be repaired or used for spare parts. Price 1 euro per kg. Todpoiuifvjfx Adnsf

Condition: new, Year of construction: 2025, machine/vehicle number: 127802131, Additional options and accessories Notes concrete plant Frumcar EBA 1700 Year: NEW - 4 aggregate hopper of 25 m³ - Capacity: 70 m³/h - mixer size: 1,67 m³ / 2250 liter - K2 portable computer system - screw conveyor for cement Todpfjhd I Trex Adnjf - cement silo 55 to. - international assembly included - 2 years guarantee This offer is subject to change, input errors and mistakes. Valid are only the specific agreements in the order confirmation respectively in the sales contract. more machines and mixing plants on our website More information Application: Construction, Material used: Concrete,

Condition: new, Year of construction: 2025, Driving extra long poles, solar system poles and large diameter poles With the new SolarPro post driver from Rhino, EuroGate International is launching a completely new way of driving posts on the market. This professional attachment, suitable for the most common earth-moving machines, drives a pile with a maximum length of 450 cm into the ground with about 1000 strokes per minute. With a force of up to 1,085 joules, posts up to a maximum diameter of 38 cm are no problem for this powerhouse. Piles are driven vertically into the ground at great speed. These machines are very suitable for solar installations, fencing and road construction. The possibilities are endless. A tough project, even in difficult terrain? No problem for the Rhino SolarPro. Designed to accelerate the installation of solar farms. The Rhino SolarPro is ‘X and Y axis adjustable’ to ensure accurate, fast and perpendicular driven piles for solar parks and fencing, among other things, regardless of the soil conditions of the construction site or the terrain. This professional construction attachment for construction equipment is designed and built in the USA with the highest quality materials. The SolarPro has a CE certificate and is built according to the standards for the European market. Features and benefits Suitable for posts up to 38 cm in diameter with a maximum length of 450 cm. The hammer and guide hold the post in place for efficient hammering of the post. Uses the existing hydraulic drive of the earth-moving machine and the use of the attachment function eliminates the need for an expensive self-propelled pile driver. This allows you to complete your project on time and within budget. The Rhino SolarPro is equipped with a universal mounting plate for the most common excavators and earth-moving machines. Equipped with modern, Furukawa FX hydraulic hammer Designed for efficient pile driving, reliable hammer with a long service life. Powerful 800 ft. lbs. (1,085 Joules) impact energy per stroke (approximately 1,000 strokes/min.) Features a new and improved piston (larger diameter and longer stroke) increases speed – provides more impact energy.Using the monobloc design, this machine requires less maintenance with only two moving parts. Pole pull function included Tjdpfxoia N Eqo Adnef The SolarPro pile driver offers an integrated pile driver with vibration aid for the toughest applications. By using this function you can remove a knocked-out post in no time at all.

Condition: not inspected (used), Hydraulic press for pressing paper etc. materials. The device was operational before disassembly. Press dimensions: length 4850 mm, width 1370 mm, height 3000 mm (possibility of reduction 2300 mm). Weight 3500 - 4000 kg. Tedpfx Adjh Nyfysnjf If you have any questions, please contact us at 539 660 495.