Used Profiling Line for sale (20,128)

Condition: used, operating hours: 30,000 h, Used CFT can filling line for soft drinks – 12,000 cans per hour Introduction and Production Capacity The Used CFT can filling line for soft drinks – 12,000 cans per hour delivers a complete solution for filling carbonated beverages in aluminum cans. CFT designed the line in 2017 and configured it to handle two Slim formats, which are commonly used in the soft drink industry. Specifically, the system processes up to 12,000 cans per hour, meeting the output requirements of medium-scale industrial facilities. As of 30/06/2025, the owner will release the line for sale. Therefore, this represents a valuable opportunity for facilities seeking to expand their production capacity. Depalletizing and Initial Inspection Initially, the CFT depalletizer automatically separates empty cans and feeds them into the production flow. Then, a HEUFT inspection unit checks each container for visual defects and dimensional non-conformities. As a result, the system ensures that only clean, undamaged cans move forward for rinsing. In addition, this early inspection step reduces the risk of line stoppages later in the process. Can Conveyance and Rinsing Next, CFT cable conveyors transport the accepted cans to a dual-channel rinser. The CFT rinser cleans the interior of each can using pressurized water jets or sterile air. Consequently, the machine maintains hygiene standards in line with food and beverage regulations. Moreover, the dual-channel configuration improves throughput while reducing contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling After rinsing, a CFT monoblock handles the filling and seaming stages with 12 filling valves and 4 seaming heads. The machine processes cans of 150 ml and 330 ml efficiently. It also controls pressure and temperature precisely to prevent CO₂ loss during the filling of carbonated soft drinks. Furthermore, this phase supports both performance and product integrity. In effect, it ensures consistent quality in high-speed conditions. Full Can Inspection and Rejection Following the filling stage, another HEUFT unit inspects the filled cans to verify fill levels, seal integrity, and the absence of leaks. When it detects non-compliant cans, an automated HEUFT rejection module removes them from the line. As such, this step protects the quality of downstream operations. Additionally, it avoids the unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveyance and Packaging Kjdjx H Tilspfx Affofa Subsequently, CFT conveyors move the approved cans to an SMI shrink wrap packer. The packer forms bundles in several formats: 4×3 (12 cans), 6×4 (24 cans), and 2x2x3 (12 cans). In this way, the flexible configuration supports various packaging and distribution strategies. Besides improving logistics, this packaging versatility allows rapid changeovers between product sizes.

Condition: used, Valve slide production: 2 Lidköping centerless grinding machines: Type 46/G and Type 4B/G 1 1 Knoll HF1000/6000 coolant treatment system Kjdow Sw Rcopfx Affsfa *

Condition: used, Year of construction: 2017, Working width from to 40-150 mm Working height from to 18-50 mm 0 6100 mm Finger jointing line Weinig Grecon Profijoint ----- Technical Specifications: ----- 1. Milling machine: ----- Material length at entry: 150-700mm Material width: 40-150mm Material thickness: 18-50mm Jointing options: horizontal and vertical joint Milling spindle power: 15 kW 2. Grecon PJ7/6100 Hydraulic Press for Joining: ----- Maximum length of finished element: 6100mm Kfodox H Alvjpfx Affsa Material trimming saw Saw diameter: 350mm Cutting unit power: 2.2 kW Without tools (techncial details according to manufacturer, with gurantee)

Condition: used, Used PRODUKT CZ model PS-LINE automatic filling and closing machine suitable for liquid or paste products. The device is suitable for filling into glass bottles and works in this working strokes: - Manual placing of bottles on the conveyor. - Automatic locking of bottles under the filling nozzles - Automatic loading of the nozzles into the neck of the bottles - Automatic filling of bottles with product (PRODFILL PS-1500/IV/L linear filling machine) - Automatic nozzle removal from packaging - Release of the stoppers and removal of the bottles from the filling position - Capping (automatic/manual) Kfsdpfx Ajx Hv Spoffsa - Automatic locking of bottles in the closing position - Automatic cap closure (PRODSCREW ZS-1500/L/S screw cap closure device) - Release of stops and removal of bottles from the closing position - Automatic application of self-adhesive label (PRODLABEL ES-1500/L/R self-adhesive label applicator) - Moving from the labelling position Line has been dismantled, attached photos are from previous installation.

Condition: good (used), Connecting line, connecting cable -Type: SIM-M8-3GD-2.5-PU -Number: 159420 -Quantity: 23 pieces available Price: per package Ksdpfx Afob A Sakofefa -Weight: 0.2 kg

Condition: used, Slabs finishing line composed by loading, trimming, back calibration, front calibration, 2 Xolar polishing machines, selection, unloading. Including supply of new transverse and longitudinal trimming machine. Kfodpfex An Ilex Affoa

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Sidel Combi PET Bottled Water Filling Line – 18,400 BPH Manufacturer: SIDEL Year: 2018 Capacity: 18,400 bottles/hour (0.5L) / 16,400 bottles/hour (1.0L) / 14,400 bottles/hour (1.5L) Line configuration: - Blow Molder: SIDEL MATRIX SBO 08 MM 8/8 (2018), includes Box Tipper, Lifting & Tipping Unit - Automatic Preform Feeding: SAMETO EBHS 2050 (2018) - Compressor: SIAD VITO 1920 (2017) - Tribloc Rinser-Filler-Capper: SIDEL SF 100 FM (2018): 100 rinsing stations, 32 filling valves, 8-head screw capper (29/25), 141 mm pitch - Cap Feeder: Krones Gebo Cermex (2018) - Fill Level/Cap Inspection: QUBBER (2018) - Container/Label Inspection: QUBBER (2018) - Container Conveyor: Tetra Pak / Gebo Cermex (2018) - Labeller: SIDEL ROLLQUATTRO F15EVO 18T/R HH3 S1/E1 (2018) - Container Conveyor: Tetra Pak / Gebo Cermex (2018) - Shrink Wrapper: SIDEL VERSA FILM ACCESS (2018) - Pack Conveyor: Tetra Pak / Gebo Cermex (2018) - Carry Handle Applicator: KARTVILLE H 120 ND (2018) - Palletizer: SIDEL KOMBI 1P 1I IN LINE (2018) - Pallet Conveyor: Tetra Pak / Gebo Cermex (2018) - Pallet Inspection: Tetra Pak / Gebo Cermex (2018) - Layer Pad Inserter: Tetra Pak / Gebo Cermex (2018) - Pallet Stretch Wrapper: Robopac HELIX 3 E (2018) All equipment is in excellent condition and suitable for high-capacity still water bottling in PET packaging. Kfodpjx Nahyefx Affsa

Condition: good (used), Horizon MC-80a + MC80m + SPF-10II + FC-10II Booklet Making Line Machine in very good condition, ready to operate. The line consists of: Kedpex Hqkysfx Affsfa – Horizon MC-80a + MC80m Max size: 318x470mm Min size: 110x160mm Suction feeder 8 shelves Right and left delivery Stack height: 50mm Basic weight: 40-270g 380V power supply Weight: 250kg/tower 400V power supply Jam, double-feed, and no-feed sensors. Horizon SPF-10II Max size: 320x470mm; Min. size: 148x148mm Wire stitching Folding Two stitching heads 230V power supply Weight: 280kg Horizon FC-10II Cuts 120 pages 230V power supply Weight: 180kg The machine comes with: operating tools, spare parts, and documentation.

Condition: used, machine/vehicle number: 007975, Position 1: Panel Feeding and Loading FERWOOD CUSTOMIZED-FW DET LINE Kfodpfxewmw Edo Affea Position 2: introducer FERWOOD CUSTOMIZED-FW DET LINE Position 3: Double Squaring Machines FERWOOD CUSTOMIZED-FW DET LINE Position 4: Roller Conveyors FERWOOD CUSTOMIZED-FW DET LINE Position 5: Double Squaring Machines FERWOOD CUSTOMIZED-FW DET LINE Position 6: Panel Stacking and Offloading FERWOOD CUSTOMIZED-FW DET LINE

Condition: used, Used Hosokawa Micron Ltd model MICRON RI 12 K322 CF inline disintegrating slurry mill. Product contact parts in stainless steel. Unit has a throughput capacity of approximately 100 to 120 cumt/hr (product dependent). Working pressure rated 10 bar with a design temperature of 0 to 100 deg.c. Unit is belt driven by 37kw motor. Unit is mounted on a mild steel stand. Kfsdpfxox Hv I Ro Affsa Click on the link below to see a video of the machine running.

Year of construction: 2018, condition: ready for operation (used), This MAYPRO LC2 was manufactured in 2018. It features an industrial PC with proprietary software, PLC integration, and can produce up to 2,000 pallets per 8-hour shift. Minimum and maximum pallet dimensions are 600 mm x 600 mm and 1,500 mm x 1,500 mm, respectively. It includes an automated wood feed system, multi-head nailing, and an integrated stacking system. Total installed power is 20-40 kW. Contact us for more information about this machine. Kodpfx Asx Hlh Tjffsfa Application Types Complete Production

Condition: used, Breton Sample Line is the line for production of display samples in a wide range of materials and sizes The samples that can be produced on the Samples Line are suitable for marketing and exhibition uses. The line can process several materials: quartz, granite, marble, and porcelain stoneware. Kfodpoxdi Rwefx Affsa

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, feed length X-axis: 13,000 mm, feed length Y-axis: 240 mm, feed length Z-axis: 100 mm, feed rate X-axis: 25 m/min, pressing force: 40 t, input voltage: 400 V, total height: 1,120 mm, working height: 1,120 mm, milling spindle length: 330 mm, control voltage: 400 V, workpiece height (max.): 100 mm, tool diameter: 240 mm, rotational speed (max.): 6,000 rpm, air pressure: 7 bar, total length of planing tables: 13,000 mm, We offer a fully automated production line for the manufacture of KVH structural timber. The line is fully certified with CE marking and by the Wood Technology Institute in Poznań. Compliant with ENPN 14.081 and 14.081 standards Kfsdsxfzyyepfx Affja 1. Angled discharge conveyor 2. Infeed table for visual wood grading 3. Buffer before defect cutting saw 4. Automatic defect cutting saw with camera for fluorescent chalk 5. Buffer before finger jointing machine 6. Finger jointing machine with glue applicator and cross-cut saw for lengths up to 13 m 7. Chain conveyor storage from finger jointing machine to four-side planer 8. Automatic infeed for four-side planer 9. Four-side planer Winter 6-33 10. Outfeed roller conveyor from four-side planer 11. Automatic packaging machine for planed timber 12. Chain conveyor 13. Strength tester for laminated timber

Condition: used, Year of construction: 2012, operating hours: 60,000 h, functionality: fully functional, feed rate X-axis: 12 m/min, workpiece weight (max.): 50 kg, working width: 1,350 mm, total length: 62,000 mm, total height: 2,800 mm, total width: 3,200 mm, type of input current: AC, working height: 120 mm, input voltage: 400 V, suction capacity: 36,000 m³/h, input current: 800 A, input frequency: 50 Hz, power: 440 kW (598.23 HP), compressed air connection: 6 bar, complete lacquering line: 1x Heesemann sander (LSM 8, 2006.10.251, 2006, 2x roller / 2x pads, ) 2x Safo brushing machne (2006, DCSF 135 2W) 1x Cefla lacquering spray Cabin (2012, Roctre D/HS) 3x Cefla hot air drying tunnel (2012, Aquadry LA ) 1x Cefla cold air drying tunnel (2012, Aquadry RLA) Kfjdpfev T Ttxsx Affja 1x UV lamp dryer ( 3lamps, UV-R SPM3/2500s) 2x hydraulic lifters (200-900mm height)

Condition: used, mileage: 475,766 km, power: 471 kW (640.38 HP), first registration: 03/2022, fuel type: diesel, empty load weight: 8,057 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: intarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of beds: 2, front tire size: 385/55R22,5, rear tire size: 315/70R22,5, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, central locking, compressed air brake, cruise control, differential lock, fog lights, navigation system, onboard computer, parking heater, spoiler, truck registration, MAN TGX 18.640 XXL Full Air Suspension | Leather seats, independent roof air conditioning | Automatic transmission, EURO 6 | Intarder, refrigerator | Heated/ventilated seats, auxiliary heater, cruise control | Air conditioning, electric windows, heated electric mirrors | Radio/CD, differential lock | 2 tanks | Austrian vehicle | Subject to error, input mistakes, and prior sale. Kfedjx Higmspfx Affoa

Condition: used, Year of construction: 1980, outer diameter: 38 mm, pipe diameter (max.): 38 mm, PRODUCT (PROFILE, TUBE) .. external diameter min.: 11 mm .. external diameter max.: 38 mm .. wall thickness min.: 0.8 mm .. wall thickness max.: 2 mm LINE CHARACTERISTICS .. welding process: HF inductive .. sawing process: travelling .. speed max.: 120 m/min ELECTRICAL SPECIFICATIONS .. mains power supply: 440 kVA For sale is a fully serviced and excellently maintained tube welding line . The line was previously used for the production of USM Haller furniture tubes, but it is designed for a wide range of tube diameters, making it highly versatile for different manufacturing requirements. Welding is carried out with an induction HF system from EFD Induction, built in 2018, ensuring a modern and efficient welding process. Total line length: approx. 100 m Operation: handled by 7 operators Condition: well-maintained, fully operational Kfjdpjx Hd Thsfx Affea Scope of delivery: complete package An excellent opportunity for companies looking for a reliable and high-performance tube welding line.

Year of construction: 2023, condition: ready for operation (used), A recirculating rack oven WP is available. Tray dimensions X/Y: 600mm/800mm, max. rack trolley diagonal: 1070mm, max. rack trolley height: 1800mm, baking area: 10m², max. tray load: 350kg. Machine dimensions X/Y/Z: approx. 1550mm/1650mm/2550mm, weight: approx. 2000kg, controls: Navigo 3. Documentation available. An on-site inspection is possible. Kjdpfox Ivikox Affjfa

Condition: used, functionality: fully functional, travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, total height: 3,300 mm, total width: 8,800 mm, total length: 6,600 mm, table width: 2,200 mm, table length: 4,000 mm, overall weight: 10,500 kg, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, CNC cutting line with two interpolated 5-axis spindles, mounted on two opposing independent beams, with a belt table, for full-depth or incremental cuts on marble, granite, engineered stone and similar workpieces. Kodpfx Afsxdi Agefofa

Condition: excellent (used), Year of construction: 2010, operating hours: 2,125 h, functionality: fully functional, MG Recycling – Copper Cable Granulation Line Manufacturer: MG Recycling Model: Matrix 400 Complete Cable Granulation Line Condition: Excellent – Fully operational Availability: Immediate Technical Description: Cable granulation line including: • Fully rebuilt pre-shredder (recent overhaul) o All rotor bearings replaced o Gearbox bearings replaced • Conveyor with magnetic rollers for scrap separation • Dosing hopper • Feed conveyor • Blade mill with 3 / 4 / 5 mm calibration screens • Separation by cyclone and zig-zag separator • Finishing turbo • Densimetric table • Dust extraction with bag filter Spare parts included: • Pre-shredder: 1 set of knives + counter-knives • Blade mill: 3 sets of blades and counter-blades Capacity: ≈ 200 kg/h finished product Application: Copper cable processing and recycling Price: €120,000 (complete processing line) Additional information: • Installation can be seen in operation • Photos and further details available on request Kfodpfxex It N Us Affsa 📩 Contact us for more information

Condition: used, Year of construction: 2010, operating hours: 100,000 h, functionality: fully functional, workpiece weight (max.): 50 kg, working width: 1,400 mm, suction capacity: 50,000 m³/h, type of input current: three-phase, total height: 2,800 mm, total length: 65,000 mm, total width: 2,700 mm, power: 365 kW (496.26 HP), input frequency: 50 Hz, input current: 930 A, operating pressure: 6 bar, workpiece width (max.): 1,250 mm, complete lacquering line: 2x Costa K7 sanders (2010, 1st- 2x roller / 2x pads, 2nd- 2x brushing, 1x pad ) 1x Heesemann sander (LSM8 2006.12.161) 2x Wikoma hot air drying tunnel (2002) Kfjdev Tbgyspfx Affoa 4x UV lamps dryer ( 2lamps, UV 2000 M2+CRIM+TN 3500/HT / 2lamps UV 2000 M2+CRIM+TN 3500/HT / 1lamp UV 2000 M1+CRIM+TN 3000/HT / 3lamps UV 2000 M3+CRIM+TN 4000/HT) 2x stain roller coaters ( Smartcoater M) 2x heavy putty roller coaters (Smartcoater SP1) 3x lacuer roller coaters (Smartcoater MF) 8x belt/roller conveyors 2x hydraulic lifters (200-900mm height)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total height: 4,600 mm, total length: 37,600 mm, input voltage: 400 V, cone diameter: 140 mm, control voltage: 230 V, Type: PET Strap Production Line / 2021 Raw material: PET virgin, PET Bottle Flakes or Mix of both / PP Virgin, PP Recycle Strap width: 12-19mm (9-32 mm extra Mold needed) Strap thickness: 0,6 –1 mm (0,5-1,27 mm extra Mold needed) Operation side: Left Main voltage: 400V / 3ph / 50 Hz Capacity: 500 Kg/Hour PET / 300 Kg/Hour PP Extruder Screw Diameter: 140 mm Kfedpfx Afeua Szcsfsa Winders Quantity: 4 Winders

Year of construction: 2006, condition: like new (used), The wafer and biscuit factory that benefits from a continuous, fully automated production process and has two main lines: wafers and biscuits. The wafer line has a capacity of 35-40 kg/h with a wafer weight of 45-55g and obtaining three quality types: 1. wafer weight = 45g/pc, cream layer = 1.25:1 – capacity –2.77 t/24h 2. wafer weight = 45g/pc, cream layer = 1.35:1 – capacity –2.89 t/24h 3. wafer weight = 45g/pc, cream layer = 1.50:1 – capacity –3.05 t/24h The line is equipped with a packaging machine and the collection and reuse of the scraps resulting from the cutting process is done automatically. Kodpfx Ael Siv Ssffsfa The biscuit line has a capacity of 300 - 500 kg/h and three qualitative types can be obtained: 1. simple 2. sandwich 3. caramel 4. cocoa 5. glaze Simple biscuits can be: Strength = 300-400kg/h Soft = 400-500kg/h Crisps = 350-500kg/h The production is continuous, automatic, the line being equipped with a caramelizing device, sandwich, with 30 sets of shapes, chocolate coating device, including packaging and 5 temperature zones with independent, automatic temperature control.

Condition: ready for operation (used), PELLET LINE 3,5 TONS/HOUR Kedog Sbbfopfx Affofa

Year of construction: 2019, condition: like new (used), The lineis in the Poland, working, connected, right away to sell. General data Category of technical measure equipment/production line Type of technical agent polystyrene forming line Manufacturer ERLENBACH MASCHINEN GmbH Model, Type EM MOTION Press: EHV-C-E 01 1485/1285; Vacuum unit: EV350 L DN 125 Mileage 9,164 duty cycles (556 rbh) Year of manufacture 2019 Technical parameters Equipment Vacuum unit Erlenbach EV 350L DN125 Power supply: AC 400/415V, 50Hz Dimensions: (L x W x H) 2350 x 1060 x 1190 mm Weight: approx. 700 kg. Number of vacuum pumps: 2 Number of water pumps: 1 Water consumption: 300 l/h Capacity: up to 1.9 m2 of mounting surface Vacuum pressure: 0.8 bar Thermoforming press Erlenbach EHV-C-E 1485/1285 Power supply AC 400/415V, 50Hz Dimensions: (L x W x H) 4270 x 3600 x 5620 mm Weight: approx. 12000 kg. Max. fitting size: 1485 x 1285 mm Max. fitting depth 180 mm Flange dimension of fixed/movable side 1560 x 1360 mm Working pressure: max. 1.6 bar Machine stroke: 800 mm Machine movement: 2x 6.9 kW electric motor Ejector: 4.2 kW electric motor Kfedpfx Aehutdkeffea Description of the operation, A line for the production of molded parts from EPS, EPP, EPE material consisting of an automatic press for fittings and a vacuum unit. The vacuum unit foams and feeds the finished raw material to the press which forms it using heated dies (molds) into ready-made moldings.

Year of construction: 2021, condition: excellent (used), Currently, the industrial line produces 2.2 to 2.5 tons per hour of high-quality pellets for heating from coniferous and deciduous wood. Waste material from other wood processing plants can also be used as raw material. Additionally, pellets can be produced from vegetable raw material for animal feed as an activity, as well as pellets from organic fertiliser for soil fertilisation. The company has been operating for 6 years and has two production lines. Ksdpel Sny Aefx Affsfa The equipment of one 1 ton/hour production has been in operation since 2013 and the second 2 ton/hour is new since 2019 and with proven production functionality.