Used Profile for sale (5,843)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Nwedpeyhcabefx Af Sel Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: good (used), *Description:* ZOPF RS 302 three-roller bending machine, manufactured in 1990. German-made. Manual machine mounted on a base for bending round, square, flat, and shaped steel, stainless steel, and aluminum tubes. Mounted on a metal frame with integrated storage. Complete machine with rollers. Ideal for locksmithing, sheet metal work, and guardrail fabrication. *Specifications:* - *Brand / Model*: ZOPF RS 302 9048 L - *Year*: 1990 - *Type*: Manual three-roller bending machine Nwedszxhh Repfx Af Ssl - *Adjustment*: Upper roller adjustable by handwheel - *Mounting*: On a steel base with doors - *Safety*: Emergency stop - *Equipment*: Set of rollers included *Condition:* Good overall condition. Machine is visible and operational. Video available upon request.

Condition: used, Year of construction: 2004, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, workpiece length (max.): 1,300 mm, edge thickness (max.): 20 mm, feed rate X-axis: 40 m/min, The machine has the following configuration: Gluing Gluing system: EVA Adhesive application: single-sided and double-sided Scoring saw Motor power: 2.2 kW Speed: 6,000 min⁻¹ Nodpfx Afoz Ekczj Sewl Profiling unit Motor power: 6.6 kW Speed: 6,000 min⁻¹ Cross-cutting saw unit Number of motors: 2 Edge trimming unit, top and bottom Number of motors: 2 Motor power: 1.85 kW Speed: 12,000 min⁻¹ Edge rounding unit Number of motors: 2 Motor power: 1 kW Speed: 12,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Motor power: 6.6 kW Speed: 6,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Motor power: 6.6 kW Speed: 6,000 min⁻¹ Belt sanding unit Motor power: 2.2 kW Belt sanding unit Motor power: 0.75 kW Brushing unit Motor power: 0.75 kW Brushing unit TECHNICAL DETAILS Workpiece length: 280–1,300 mm Workpiece width: 320–2,800 mm Workpiece thickness: 8–60 mm Edge thickness: max. 20 mm Feed speed: max. 40 m/min MACHINE DETAILS Control system: ICOS OPEN EQUIPMENT Chain conveyor with drive shoes Pressure bar with rubber belt Edge heating lamps Roller magazine Hot-melt adhesive tank Hot-melt adhesive pre-melter Edge pressing unit with 9 pressing rollers CE-compliant The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Condition: used, Year of construction: 2008, Profiling machine Manufacturer: SCM Type: Superset NTE Year of construction: 2008 Technical data - Touchscreen control for the machine with 6 spindles + UNIWAVE - Spindle speed 8,300 rpm - Working width 240 mm, working height 125 mm, electronic - Touchscreen control MOBILE 10 - HSK 85S - SPINDLE QUICK-CHANGE SYSTEM T-SET - QUICK-CLAMPING DEVICE for tools - 7 shafts as a UNIWAVE, suitable for separating - 2 feed units after the upper spindles to reduce the center distance from 620 to 450 mm - Motor-driven feed roller in the working table, basic equipment for forced lubrication, electronic horizontal positioning, electronic adjustment of the tool diameter (setup) - Manual pump for lubricating the working table - WITH machining tool - Min. working width (finished size) mm 15 - Max. working width (finished size) mm 240 - Min. length of the individual workpiece mm 450 - Feed speed controlled via inverter 6 - 36 m/min, feed motor power kW 4 - Motor power surfacing spindle kW 7.5, quick-clamping device - Motor power vertical spindle right kW 7.5, Powerlock HSK 85 - Motor power vertical spindle left kW 7.5, Powerlock HSK 85 - Motor power upper horizontal spindle kW 7.5, quick-clamping device - Motor power 2nd upper horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power lower horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power universal spindle kW 7.5, quick-clamping device - Spindle speed rpm 6000/8300 - Spindle diameter mm 40 - Spindle receiving length vertical mm 220 - Spindle receiving length horizontal mm 250 - Axial adjustment range of the vertical spindles standard mm 75 - Axial adjustment range of the horizontal spindles standard mm 45 min. max. - Sweeping circle diameter of the surfacing cutter mm 120/140 mm min. max. - Sweeping circle diameter of the profiling spindles mm 100/200 - Profiling depth of the 2nd lower shaft with a tool diameter of mm 200 mm 15 - Diameter of the spindle cylinders mm 120 - Diameter of the feed rollers mm 140 - Infeed table length mm 2500 - Adjustment range of the infeed table and infeed fence 10 mm - Motor-driven feed roller in the outfeed table - Manual central lubrication - On/off switch for the feed unit before the surfacing cutter - Horizontal pressure pads before the surfacing cutter with on/off switch - Pressure shoes at the front on the protective cover of the horizontal spindle(s), hardened insert in the working table in front of the surfacing cutter - Pneumatic pressure shoes in front of the upper horizontal spindles - Horizontal pressure device in front of the surfacing cutter, can be switched on from the control panel - 2 feed rollers 140 x 25 per feed shaft - Lighting inside the protective cover - Extraction capacity min. 10,443 m3/h - Including extraction hood! - Including Powerlock mounting bracket - All 240 mm heads, horizontally arranged, and fixed tools on HSK spindles are included. - Spare parts catalog: Complete, 8 PDF catalogs available Note: Not all tools shown are part of this offer. Nwedpfx Afszuzfho Sol Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Machine type: Corrugated sheet profiling line – new CHIEF PHENIX type Main components: - Coil lifting arm – 10-ton capacity - Decoiler – 10-ton capacity - Straightener – Dimeco - Feeder – Dimeco Microfeeder - Hydraulic punching press – SCMB 650 tons - Post-press feeder – Heilbronn - Roller conveyors - Rollforming line – 1000 mm, corrugated profile, CHIEF PHENIX new type Machine Application Automated production line for converting metal coils into corrugated sheets, including straightening, high-force hydraulic punching, continuous feeding, and rollforming. Suitable for structural and cladding applications. Nwjdpfxew Dd Hpe Af Sel Key Features / Differences Modern system with high-performance units: 650-ton SCMB hydraulic press for precise punching, Dimeco straightener and Microfeeder for high throughput. 1000 mm rollforming line configured for optimized CHIEF PHENIX corrugated profile.

Condition: used, functionality: fully functional, PROFILE BENDER FOMP DIMENSIONS: 160X120X115 (h) cm, WEIGHT: 1300 KG Nwjdpfx Afsv Ifq Es Sjl

Condition: excellent (used), Number of spindles 3 St. Number of tools 8 St. Spindle diameter 50 mm Dimensions (L/W/H) 4250x1850x2300 mm Weinig Univar 6 CNC ----- Technical details summary (please ask for possibly more included equpment) ----- 1st profiling spindle: ----- > spindle rotation direction: clockwise and reverse for rip-off free outside profiling of sashes > position: vertical right > number of tools: 1 pcs. > length of spindle: 120 mm > number of revolutions: 6000 rpm > spindle diameter: 50 mm > tool diameter max.: 232 mm > engine: 11 kW 2nd profiling spindle: ----- > position: vertical right > number of tools: variabel, CNC > length of spindle: 320 mm > spindle stroke vertical: variabel, CNC > number of revolutions: 6000 rpm > spindle diameter: 50 mm > tool diameter max.: 232 mm > engine: 11 kW 3rd profiling spindle: ----- > position: vertical right > length of spindle: 160 mm > number of revolutions: 5850 rpm > spindle diameter: 40 mm > tool diameter max.: 210 mm > engine: 3 kW More features: ----- > possible to work online: > monitor control: > Equipment for profiling small sashes: min. 500 mm > Control: PC-Nexus If the technical characteristics of this machines donnot fit with your requirements, please get in contact with us. Our longtime experienced team is looking forward to support you in technical adaptions or in finding a suitable machine for you! Nedpfeymf Ekox Af Sowl ----- Technical details according to manufacturer - without guarantee!

Condition: good (used), Profile roof tiles Entry width 1250 mm Nwedpfxexam Rao Af Sol Material thickness 0.5 - 0.75 mm Year of manufacture 2002 Speed 8 m/sec.

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Nwodpfx Afezuzpye Sjl Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: used, functionality: fully functional, Year of construction: 1995, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Tauring, controller model: CNC3A, number of rollers: 8, pipe diameter (max.): 60 mm, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, Tube & profiles bending machine ,Tauring Slalom 60-3A 8 rollers for left and right hand bending sense Operation in manual and automatic programmable axis with digital screen readout One-pass bending programmable in different planes manipulator programmable “tube turner” 12 mtrs length tube feeder Complete with several set of rolls for tube from 14 to 60 mm - 8 pcs each set = total 140 rolls. Power rotation 3 kw voltage Vac 400/50 Nwedpfxezi Ew Ro Af Sjl power hydraulic bending 2,2 Kw

Condition: ready for operation (used), Year of construction: 2012, complete production line from SCM Technical details: Workpiece length 250 - 3,100 mm Productivity 180 parts/shift Feed rate, continuously adjustable, max. 20 m/min Nwsdpjz D R S Tofx Af Sjl Automatic central lubrication system CE conformity marking 2 slot spindles with HSK85 tool holders 2 profiling spindles, right, with HSK85 tool holders 2 profiling spindles, left, with HSK85 tool holders 3 spindles, horizontal 8 tool changers, 96 positions Space requirement approx. 30,000 x 15,000 mm Equipment of the system: 1 - Transverse conveyor SCM for feeding the planing machine 2 - Planing machine Superset NT 31 3 - Transverse conveyor SCM to the double-end profiler 4 - Double-end profiler SCM Multiten D 5 - Transverse conveyor SCM to the drilling machine 6 - Drilling machine SCM Fleximat 7 - Double-angle transfer with transverse buffer SCM TA 1/1 8 - Drilling machine SCM Fleximat 9 - Double-angle transfer with transverse buffer SCM 10 - Longitudinal conveyors 11 - Profiling machine SCM Winprof R 12 - Transverse conveyor SCM 13 - Profiling machine SCM Winprof L 14 - Transverse conveyor at the outfeed SCM

Condition: good (used), Year of construction: 2003, machine/vehicle number: 694/0-302 (2003), functionality: fully functional, operating hours: 2,580 h, power: 12 kW (16.32 HP), workpiece height (max.): 48 mm, workpiece width (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, feed rate X-axis: 11 m/min, overall weight: 2,000 kg, Equipment: documentation/manual, Holzher Sprint 1417, Year 2003 Machine is fully controlled by PLC, almost all settings can be adjusted on the control panel, no defects, well-maintained machine used with expertise. Leuco Z3 jointing cutter installed, a second set of cutters is available, various indexable inserts are available. Maximum panel thickness approx. 48 mm, edge banding from 0.3 - 15 mm possible. Chain conveyor renewed approx. 10 years ago. Spray system for separating and cleaning agents, controlled by the application. -Jointing fence, motor-driven, program-controlled. -Jointing cutters 1961, 2 x 2.0 kW. -Gluing system, cartridge type 1906, with sensing nozzle (important), cartridge magazine for 4 cartridges, color change easily possible, PU also possible. -Pressure unit 1903 MOT, pressure of the first and other rollers can be adjusted separately. -Miter saws 1918, bevel cut adjustable. -Flush trimming 1823. -Radius trimming 1942 MOT (one axis motor-adjustable for 1 and 2 mm edges, selectable on the control panel). -Profile cutting blade 2 mm 1929, pneumatically timed. -Corner copying unit 1983, carbide tipped, with adjustment on the control panel, functional, but needs further fine-tuning. -Straight cutting blade 1964. -Swivel unit, controlled by the application. Includes all operating manuals, documentation of the operating points digitally and in printed form by Holzher technicians. A set of DIA jointing cutters is also included, as well as various indexable inserts for the cutting units. Return conveyor system ZHR 15 Boomerang, Year 1995 Mounted on the machine with connection to the pressure bridge. Easily adjustable from the front control panel, with a rotating device for parts. Adjusted to the feed rate, sensors still available from HOMAG. -Information without guarantee, the parties agree that the sale of the used machine takes place with complete exclusion of any warranty, guarantee and liability for defects. The buyer has inspected and tested the machine before purchase. -Sale only to commercial enterprises, machine is currently powered and in operation. Price is negotiable. Machine available after clarification in December / January 2027. Crane or forklift loading also possible from an external warehouse. Nsdez Dxh Nepfx Af Sjwl

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: Nwsdpoyzh Ulofx Af Ssl - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 91.0651.90.11D, total height: 2,000 mm, total length: 2,000 mm, total width: 2,000 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 800 rpm, type of input current: three-phase, grinding wheel diameter: 180 mm, overall weight: 1,000 kg, grinding spindle speed: 2,000 rpm, workpiece diameter (max.): 225 mm, We offer this Wendt OPRA 200V tool grinding machine in like-new condition, year of manufacture 2023. Manufacturer: Wendt Model: OPRA 200V Year of manufacture: 2023 Nwodpfxjyh Rklj Af Sel Condition: as new Category ID: 1166 Type ID: 307 Machine type: tool grinding machine If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, KABBERT Körnerpresse – Duct Corner Insertion & Press Machine A high-quality, German-engineered press machine specifically designed for the fast and secure locking of metal corner pieces into rectangular duct flanges. The Kabbert Körnerpresse replaces manual hammering, using a powerful mechanical press mechanism to lock the corner elements tightly into the profile joints for an airtight and rigid connection. Specifications • Manufacturer: Kabbert GmbH (Germany) • Type / Model: Körnerpresse (Flange Corner Press) • Machine No. (Masch. Nr.): 310616 • Application: Inserting, pressing, and locking corner pieces into rectangular ventilation duct profiles. • Maximum Sheet Thickness (Blechstärke): max. 1.5 mm • Machine Weight (Gewicht): 50 kg Nedezbqk Uspfx Af Sjwl Key Features & Components • Precise Corner Locking: Specifically designed to press and secure metal corners at the joints of profile flanges, ensuring a perfectly aligned and rigid duct frame. • High-Speed Assembly: Eliminates intensive manual labor and hammering, significantly speeding up the final assembly of rectangular duct sections. • Preserves Galvanized Coating: The cold-pressing technology forms a strong mechanical lock without scratching, burning, or damaging the zinc layer, maintaining full corrosion resistance. • Compact & Portable: Weighing only 50 kg, the machine is highly space-saving, easy to relocate, and fits seamlessly into any workshop layout. • Heavy-Duty German Quality: Built to industrial standards for reliable, repeatable, and trouble-free operation under daily workshop loads. Condition & Availability • Status: Fully operational and in good working condition. • Ready for delivery

Condition: used, Cassettes + cutters for a roll forming machine used in the production of trapezoidal sheet metal. Two different profiles can be produced. H = 158 mm x W = 750 mm H = 153 mm x W = 840 mm Details can be found in the photos. Processable sheet metal: Aluminum + steel in 0.75 - 1.5 mm Consisting of a total of: - Cassette 1 for profile 153 and 158 - Cassette 2 for profile 153 and 158 - Cassette 3 for profile 153 and 158 - Cassette 4 for profile 153 - Cassette 4 for profile 158 - Cassette 5 for profile 153 - Cassette 5 for profile 158 Nsdpfszvgwfex Af Sewl - Cassette 6 for profile 153 - Cassette 6 for profile 158 - Cutter for profile 153 - Cutter for profile 158 All items come from ongoing production; the sale is due to a product changeover. This includes only the cassettes + cutters, without drives, coils, shears, etc. Total weight: approx. 86,000 kg

Year of construction: 2022, operating hours: 1,700 h, condition: excellent (used), functionality: fully functional, cutting length (max.): 6,500 mm, machine/vehicle number: C127713, Twin head cutting-off machine, for cutting aluminium and PVC bars in various thickness and angles. Nedezb I N Ispfx Af Sewl

Condition: used, Year of construction: 2008, machine/vehicle number: TP128, Used AROL Pick & Place capping machine 10000 BPHTechnical Specifications & Performance DataThis Arol capping machine is designed for the closure stage of a used bottling line, applying T caps and plastic screw caps to bottles. Its pick-and-place capping system supports accurate cap handling and controlled application in beverage production and industrial packaging operations.Manufacturer: ArolYear: 2008Maximum output: up to 10,000 bottles per hourCapping system: Pick-and-placeCap types: T cap and plastic screw capRotation direction: ClockwiseDocumented head configuration: 8 heads, with references to 6 T-cap heads and 6 screw-capping headsAdvanced Automation & Control SystemsThe pick-and-place system is intended to position caps before closure, supporting repeatable capping operations at line speed. Clockwise rotation is specified for the machine configuration. During refurbishment, the capping head setup, cap delivery components, sensors, drives, and control functions can be assessed to ensure correct synchronization between bottle handling and cap application.The machine can be incorporated into an automated bottling equipment layout with suitable infeed and discharge transfer systems. Its cap-handling arrangement is relevant for facilities processing different closure styles, subject to the installed tooling and bottle-neck compatibility.Production Line Integration CapabilitiesThis capping machine is suited to installation downstream of a filling machine and upstream of labeling, inspection, or secondary packaging equipment. It can form part of a second hand bottling line for PET and Glass bottles, where reliable closure application is essential before bottles continue to the next packaging stage.For industrial packaging and beverage production, conveyors must present bottles consistently to the capping carousel and remove closed bottles without interrupting line flow. Bottle guides, starwheels, cap feed arrangements, and change parts should be matched to the required bottle profile, neck finish, cap dimensions, and closure type.Machine Condition & Maintenance HistoryThe machine is under maintenance and requires refurbishment. This status makes it appropriate for buyers planning a technical review and overhaul before commissioning. A refurbishment programme can focus on the mechanical condition of the capping heads, pick-and-place mechanism, cap transfer components, rotary transmission, and bottle-handling interfaces.Inspection of wear parts, lubrication points, guarding, electrical components, and format-related tooling is important before the machine is returned to service. The stated 2008 manufacturing year provides useful context for planning servicing, replacement parts, and integration into an existing production line.Operational Performance & VersatilityThe Arol capping machine combines T-cap and plastic screw-cap capability with a pick-and-place operating principle. This makes it relevant where a bottling operation requires dedicated closure handling for bottles fitted with these cap styles. The specified maximum capacity of up to 10,000 bottles p... Nwodpez E Dihsfx Af Sel

Condition: good (used), Year of construction: 1984, CNC Optical Profile Grinding Machine Wasino GLS-130AS Nwjdpfx Asp R Rm Ief Sol 1984

Condition: used, functionality: fully functional, Year of construction: 1996, Ring bending machine, ZOPF model ZB 60 M - motor-driven - Two-roller drive - Shaft diameter 30 mm - with standard rollers - Bending capacity up to round tube 48 x 3.2 mm Nwedpfszl Ud Ejx Af Ssl - Solid material up to 30 mm - Weight approx. 180 kg - Motor 0.75 kW, 400 V, 50 Hz, 3-phase

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Tauring, controller model: digital readout, number of rollers: 3, shaft diameter: 70 mm, roller diameter: 245 mm, pipe diameter (max.): 100 mm, tube wall thickness (max.): 6 mm, overall weight: 1,300 kg, total length: 1,640 mm, total width: 1,220 mm, total height: 1,580 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, Profile bending roll Tauring Alfa 70H2 year 2003 -Hydraulic section bending machine with digital readout Nwedpjyx Dg Sefx Af Ssl -3 rolls powered driven - -dual pre-pinch pyramid roll configuration Shafts output 70 mm – Size of universal rollers 245 mm Lateral correctors left/right side hydraulic motorized operated Machine reversible can work with shafts vertical/horizontal Tooling: -Set of universal rolls and spacers Pipe bending rolls set for tube 22,5 – 61 – 76 - ( see photos of the rolls in enclosed ) Power total installed 5,5Kw Vac 380/50 Dimension 1640 x 1220 x H1580 mm Weight 1300 kgs -CAPACITY CHART IN ENCLOSED

Condition: ready for operation (used), Year of construction: 2018, Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for reading orders/machining operations and documentation. Was serviced regularly, an on-site inspection is possible. Nwedpfszbb Rrox Af Sol

Condition: excellent (used), Year of construction: 2004, Description to follow! Nodjxy S D Sjpfx Af Sswl

Condition: used, Year of construction: 2007, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, controller model: PC22, TECHNICAL DETAILS The machine has the following configuration: Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min Pressure bar: with rubber belt Panel stop: with CNC positioning Panel infeed alignment system: available Edge application unit Processing interval: automatically time-controlled Motor power: 3 kW Speed: 9,000 rpm Edge processing Edge heating lamps: available Roller magazine: available Hot melt adhesive reservoir: available Hot melt adhesive pre-melter: available Number of pressure rollers: 7 Positioning: CNC-controlled Trimming unit Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Flush trimming unit, top and bottom Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge rounding unit Manufacturer/Model: FF12 Number of motors: 4 Motor power: 0.4 kW Speed: 12,000 rpm Profile trimming unit Number of motors: 1 Processing interval: automatically time-controlled Motor power: 5 kW Speed: 11,600 rpm Scraping blade unit Manufacturer/Model: PN10 Glue scraping blade unit Brushing unit Number of motors: 2 Spray device: available MACHINE DETAILS Number of processing units in edge processing: 7 Control system: PC22 Nwedpfx Aoz Ekbksf Ssl EQUIPMENT Pressure bar with rubber belt Panel stop with CNC positioning Panel infeed alignment system Edge heating lamps Roller magazine Hot melt adhesive reservoir Hot melt adhesive pre-melter 7 pressure rollers Trimming unit Flush trimming unit, top and bottom Edge rounding unit FF12 Profile trimming unit Scraping blade unit PN10 Glue scraping blade unit Brushing unit with spray device PC22 control The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 6042

Condition: reconditioned (used), Year of construction: 1982, Mubea / Muhr and Bender BFL 350: Nwedpfoium Stex Af Ssl - Combined Profile-/bar steel shears with hole punch and notcher - Punching force 35 tons - punches up to Ø 28/23 mm in 10/12 mm sheet thickness - cuts up to Ø 30 mm / ■ 28 mm /∟ 90 mm x 8 mm / 150 mm x 13 mm / 80 mm x 16 mm Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.