High pressure pump unit 610bar 78l/min

Hammelmann HDP 142

Condition: excellent (used), Year of construction: 2007, operating hours: 3,114 h, functionality: fully functional, total width: 2,500 mm, total length: 7,100 mm, total height: 2,800 mm, pressure: 1,120 bar, operating pressure: 1,120 bar, fuel: diesel, overall weight: 12,000 kg, rotational speed (max.): 2,100 rpm, water tank capacity: 1,600 l, empty load weight: 12,000 kg, power: 286 kW (388.85 HP), year of last overhaul: 2024, water pressure: 1,120 bar, pump capacity: 111 l/min, Equipment: rotational speed infinitely variable, type plate available, High-pressure pump unit Hammelmann HDP 233 in BDF / WAB container. Similar but not Kamat, Uraca, or Woma. Pump type: Hammelmann HDP 233 PRESSURE STAGE 1: Operating pressure: 1120 bar Flow rate: 111 l/min. PRESSURE STAGE 2: Operating pressure: 920 bar Ffsdjwyw Dtspfx Adpow Flow rate: 131 l/min. Selector/diverter valve with manual switch installed. Drive speed: 2100 rpm Plunger: d30 mm Drive power: 230 kW With 286 kW Deutz BF 6M 1015 C diesel engine With workshop and changing room. Dimensions (LxWxH): approx. 6000x2500x2800 mm Weight: approx. 12,000 kg Year of manufacture: 2007 (HD pump from 2005) Operating hours: 3114 Condition: New plunger seals, fuel and oil filters. The high-pressure pump is in very good used condition.

Condition: excellent (used), Year of construction: 2011, operating hours: 59,234 h, functionality: fully functional, This machine is for sale by a European corporation and is in exceptionally well-maintained condition. Further photographs and video recordings are available at any time upon request. Ffodpex Sylkefx Adpsw Technical Data – DMC 210 FD Machine type: 5-Axis Machining Centre Model series: DMC 210 FD Machine category: Metal-Cutting Manufacturing Equipment 3-Axis Milling Machine CNC-controlled Year of manufacture: 2011 Condition: Very good Operating hours: approx. 59,000 h Weight: 50,000 kg Control / CNC: CNC control, Siemens 840D Solutionline Number of axes: 5-axis machining center Control type: Fully automatic (Code 017) Spindle / Tooling Tool holder: HSK 100, DIN 69871 HSK100 Spindle type: HSK100 Maximum spindle speed: 6,300 rpm Maximum feed rate: 60 m/min Maximum tool weight: 35 kg Maximum tool length: 450 mm Maximum tool diameter: 250 mm Tool magazine / Measurement technology: Tool magazine: 280 positions Measuring probe: Renishaw MP10 Travels: X-axis travel: 1,800 mm Y-axis travel: 2,100 mm Z-axis travel: 1,250 mm Table / Workpiece Table length: 1,850 mm Table width: 1,850 mm Maximum workpiece length: 1,500 mm Maximum workpiece weight: 5,000 kg Power supply / Connection data: Mains connection: 400 V, 3/N, PE, 50 Hz Power consumption: 167 kVA Maximum current: 241 A Maximum circuit breaker: 250 A DC control voltage: 24 V DC AC supply voltage: 230 V AC Total installed power: 163 kW Equipment: Operator platform: Available Coolant system: Available Chip extractor: Available Operating manual / Documentation: Available

Condition: used, Year of construction: 2017, operating hours: 300 h, functionality: fully functional, total width: 2,160 mm, total length: 1,350 mm, total height: 1,700 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 1,850 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, empty load weight: 1,850 kg, fuel tank capacity: 140 l, type of cooling: water, power: 120 kW (163.15 HP), water pressure: 2,500 bar, pump capacity: 25 l/min, Equipment: crane, type plate available, CD160-2500 with 2500 bar and 25 l/min. The pump is powered by a water-cooled 4-cylinder SISU diesel engine. The entire frame is made of hot-dip galvanized steel, ensuring long durability and corrosion resistance. The frame is equipped on all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side mount for the protection and storage of, for example, high-pressure hoses. Similar to but not a Dynajet, Falch, Hammelmann, Kamat, Uraca, Woma, etc. General Specifications: Operating pressure: 2500 bar Flow rate: 25 l/min Max. pump speed: 560 rpm Drive engine: 4-cylinder SISU diesel Drive engine output: 119.3 kW Ffodpfx Ajxufbtedpjw Drive engine speed: 1800 rpm Tank: 140 L Max. fuel consumption: 26 L/h Dimensions and unladen weight (SKID): 2160 mm x 1350 mm x 1700 mm (1850 kg) Standard accessories included.

Condition: used, mileage: 69 km, first registration: 08/2023, fuel type: diesel, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space volume: 10 m³, Year of construction: 2023, operating hours: 8 h, machine/vehicle number: EXVAC SE.10, RIVARD suction excavator EXVAC SE.10 !! IMMEDIATELY AVAILABLE !!! Fedpfxog Dl Aro Adpjfw RIVARD industrial turbine Detachable suction hose inlet 10.5 m³ container volume 4-joint boom Hydrostatic drive Filter cleaning Rear / front fall protection Camera route monitoring

Year of construction: 1988, condition: good (used), machine/vehicle number: 14684/1, suitable for copper cable and plastic recycling Fedsnvdq Nepfx Adpefw

Condition: good (used), in total 14 pieces available 2 x SEEPEX Nemo 1 x NETZSCH NM045, GETRIEBEBAU NORD, year: 2001 2 x NETZSCH NM021BY, HANNING 0,75 kW, year: 2014 Ffodpelhr Hfsfx Adpjw 2 x ALLWEILER SEP 380.1A11P01, year: 1990/1992 2 x ALLWEILER AE1N25-ID, GETRIEBEBAU NORD 0,75 kW, year: 1996 3 x ALLWEILER AE1E550-ID, GETRIEBEBAU NORD 4 kW, year: 1996 1 x unknown brand, LEROY SOMER gearbox, 5,5 kW

Condition: excellent (used), Year of construction: 2001, pressure: 13 bar, 1 used steam boiler ----- Manufacturer: LOOS, Gunzenhausen Type: U-HD Heating surface approx.: 31 m² Maximum output: 2,000 kg/h Maximum permissible operating pressure: 13.0 bar Increased test pressure: 23.4 bar Water content at NW approx.: 1,740 l Total water content approx.: 2,480 l Fsdpfx Adowub Hbjpsfw Year of manufacture: 2001 Equipped with Weishaupt gas burner, gas control line, control cabinet, feed water pump, water level sight glass, steam and safety valve, and the existing coarse and fine fittings.

Condition: used, Year of construction: 2021, operating hours: 6,670 h, machine/vehicle number: 241431, fuel type: diesel, power: 129 kW (175.39 HP), motor manufacturer: Iveco, Field of application: Construction Empty weight: 2.150 kg Fsdpfstr Iw Hex Adpefw Generator capacity: 143 kVA Transport dimensions (LxWxH): 2.99x1.1x1.5 Please contact PFEIFER GROUP for more information

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Ffodpfxjpugwij Adpow The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: excellent (used), Year of construction: 2010, power: 600 kW (815.77 HP), 1 burnt Weishaupt oil burner ----- Type : WM-L20 / 2-A Version : R Nox class : 2 Output : 600 - 2.100 kW Oil throughput : 50 - 176 kg/h Year of construction : 2010 with WFM 100 Ffodpfx Aouugwcjdpsw