Used Press Machine for sale (68,532)

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication Dcsdpsk S Htxjfx Albol - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Dcjdpsmck Rysfx Albol Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Dcsdpfx Aloya Iaqebjl Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, input voltage: 230 V, input current: 15 A, input frequency: 50 Hz, Equipment: documentation/manual, Used Secabo TS7 Transfer Press Manufacturer: Secabo Dcjdey Nztdepfx Albol Model: TS7 Voltage: 230-250V (50Hz) Includes manual and extra parts

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive Dsdpfx Alexpqy Dsbocl - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device Dedpohik Ezjfx Albocl - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Year of construction: 1977, condition: excellent (used), machine/vehicle number: 3273, Neff - internal broaching press machine type: vertical hydraulic broaching press manufacturer: Neff Germany type: 16 SRKA built in: 1977 stroke: 1300 pulling force: 16.000KG working stations: 1 PCs drive: hydraulic system equipment: coolant system Dcsdpfed N Rl Nex Albsl remark: machine under power in stock Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Condition: used, Single-column – Eccentric press RICHTER Type PEKRS 80 Year of manufacture 1970 – Overhauled in 2024 Clamping force 80 tons Reach 350 mm Table size 900 x 650 mm Through-hole in the mounting table Ø 200 mm Ram area 700 x 500 mm Stroke rate 70 strokes/min Stroke adjustment 6 – 100 mm Ram adjustment 85 mm Installation height max. 400 mm Arbor hole Ø 50 mm Table height above floor 810 mm Motor power 8 kW Power connection 400 volts, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION XSz 32 - Pneumatic ram balancing cylinders - Overload protection with shear plate in the ram - Grease central lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest safety standards with new electrical system Control system rebuilt in 05/2024 – suitable for manual feeding operations – in accordance with DGUV Information 209-030 Press Inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machinery - Presses - Part 1: General safety requirements EN ISO 16092-2: Machinery - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for quick fault localization - New electrical cabinet, mounted on the side of the machine - Completely based on SIEMENS, with S7-1200 PROFIsafe PLC and 7" TFT touch display - Two-hand control panel with emergency stop and interlocking - Electric foot switch - Cam mechanism with run-on monitoring - Stroke release via press safety valve HERION XSz 32 with pneumatic pressure gauge - Rewiring of the machine - Updated operating manual The machine is equipped with 6 operating modes: 1 = Setup 2 = Single stroke, two-hand Dedpfx Aji Db Ibolbocl 3 = Single stroke, foot 4 = Continuous operation, foot 5 = Automatic continuous operation 6 = Reverse operation

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 Dcedpfsy D Sy Rjx Albol 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Djdpozt H Uxofx Albecl Format: 400×300 mm Pressure: 3 tons Made in Germany.

Condition: good (used), Hoza EMU punch This machine is ideal for punching out small molded parts from paper, rubber or textile goods. It has a high pressing force and fits on any stable table. The cut is initiated via a two-hand safety control. Dodpfxouzhmte Albocl Forged blades or steel rule blades can be used in the machine. Knife stroke: 30 mm Max. punching format: 150 x 100 mm Weight: approx. 150 kg Color: hammer blow blue Dimensions: 450 x 360 x 600 mm Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), HFS-210 Hot Stamping Press The machine is in perfect condition. Year of manufacture: 2019. Dcedszt H U Sspfx Albjl Description: The HFS-210 Hot Stamping Press is a pneumatic hot stamping press for hot stamping, embossing paper, and plastics. A useful device in any advertising agency or digital printing house. The cycle is operated manually. The pneumatic drive ensures repeatable work and very high die pressure on the material. The machine is equipped with an automatic foil feed, which significantly shortens the time of a single hot stamping cycle, a worktop, adjustable embossing depth, a hot plate ground to 0.01 mm accuracy, which significantly improves the quality of embossing with large dies, a control panel, and modern OMRON controls. Specifications: MODEL: HFS-210 Hot Stamping Press Heating plate size: 210 x 150 mm Work table area: 500 x 350 mm Heating temperature control: via display up to 200°C Holding foil adjustment: Automatic, potentiometer-controlled Hot plate pressure mechanism: pneumatic Height of the gilding stack: 68 mm Press force: 0.6 T Power consumption: 900 W Power supply: 230 V Machine dimensions: 750 mm (W) x 530 mm (D) x 1670 mm (H) Machine weight: 120 kg The machine includes a cross table and a die mounting frame. An instruction manual is included.

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm Dedpfozkmi Dex Albscl (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control Djdpfxeu R Sxxs Albscl - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: used, Year of construction: 1967, Heidelberg GT 64287N printing press, in good condition, immediately available. Dcedszv U Uxepfx Albjl If you are interested, we will also be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our facility after prior arrangement of an appointment.

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Dcsdpjhmmfkofx Albsl Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: good (used), Year of construction: 1995, Top-hole drilling machine, Grass ECO Press Year of manufacture: 1995 Dcodpfx Ajk D T Ncolbjl Serial number: 9502665 in good condition Right and left linear guides (Work table can be included) Weight approx. 45 kg 380 V - 50 Hz - 2.5 A Pneumatic connection - max. 6 bar CE marked

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Dcodjx U Eiaspfx Albel Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Year of construction: 2010, condition: excellent (used), machine/vehicle number: 09942, Mercerizing machine No.: 09942 Year of production: 2010 Manufacturer: Goller Textilmaschinen GmbH Am Hammeranger 1 95126 Schwarzenbach/Saale GERMANY Dcedsyhn A Iepfx Albol The machine is used for mercerizing cotton fabrics (knitted fabrics) with caustic soda solution in three stages: treatment with alkaline solution, washing (stabilization) and rinsing (neutralization).

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Dcjdpfjzf Nk Tox Albsl Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: new, TIGERMETAL WH100 – Hydraulic Workshop Press 100 Tons | Electric + Manual Pump Instead of €10,489 gross RRP, now only €6,699 net (€7,972 gross incl. 19% VAT). You save -24% compared to the RRP! The TIGERMETAL WH100 workshop press is a high-performance and robust industrial press designed for demanding applications in workshops, production, and maintenance. With a pressing force of 100 tons, the machine is ideal for heavy-duty straightening, pressing, and bending operations. Thanks to the combination of electric drive and manual hand pump, the press offers maximum flexibility: fast operation in automatic mode and precise fine control for sensitive applications. 🔧 Technical Data: Model: WH100 Manufacturer: TIGERMETAL Pressing force: 100 tons Drive: Electric motor + manual pump Motor power: approx. 3 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 320 bar Stroke: approx. 400 mm Working width: approx. 1000 mm Max. working height: approx. 1000 mm Weight: approx. 820 kg Djdpfsf Sqcyox Albjcl Advantages: ✔ Combined operation (electric + manual) ✔ Extremely high pressing force for heavy-duty applications ✔ Precisely controllable pressure ✔ Laterally movable cylinder for flexible positioning ✔ Height-adjustable crossbeam ✔ Heavy-duty, durable steel construction ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection ✔ Optionally expandable with accessories The laterally movable cylinder and the height-adjustable working table allow optimal adaptation to a wide variety of workpieces and applications. The massive steel construction ensures maximum stability and a long service life—even under intensive industrial use. The WH100 is the perfect choice for anyone looking to combine maximum pressing power with precise control and industrial reliability. A wide range of additional workshop presses in various designs, sizes, and optional equipment is available! Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. Available versions: 30 tons 60 tons 100 tons 150 tons 200 tons 200 tons: on request Custom machines: on request New machine! We are also happy to manufacture a custom-built press tailored to your requirements. The press can be tested on-site under power. ----- We are happy to provide individual consultation and prepare a tailored offer. Simply send a non-binding inquiry! ----- The stated price is net plus 19% VAT. All information without guarantee! Delivery available throughout Europe! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.

Condition: as good as new (ex-display), Demonstration machine The new briquetting press 35F from Holzprofi impresses with its sophisticated, simple and solid construction. The press is designed for trade and industry. Made in EU! Dedpevrvp Hefx Albecl Technical data: Total motor output 6.0 kW (5.1 kW S1) Briquette diameter 50 mm Power consumption approx. 2200 W/h Capacity 25 - 40 kg/hr Chip bunker 0.33 m³ Weight 400 kg Weight of briquettes approx. 900 kg/m³ Sound pressure level less than 70 dB Dimensions: 1860 x 890 x 1100 mm Special equipment as standard: Automatic change of direction of rotation of the shaft Automatic switch-off Symbolic photo! Prices subject to change, errors, printing and typesetting errors reserved

Condition: as good as new (ex-display), Demonstration Machine The new 70F briquetting press from Holzprofi impresses with its sophisticated, simple, and robust design. The press is designed for commercial and industrial applications. Made in the EU! Technical data: Motor output (continuous duty): 7.5 kW Briquette diameter: 70 mm Power consumption approx.: 4900 W/h Output capacity: 60–80 kg/h Chip hopper: 0.75 m³ Weight: 810 kg Briquette density approx.: 900–1100 kg/m³ Sound pressure level: less than 70 dB Dimensions: 2220 x 1200 x 1510 mm Standard special equipment: Automatic shaft rotation direction reversal Automatic shutdown Sample image! Dodpfjvr I N Sox Albocl Price subject to change. Errors and omissions excepted.

Condition: used, Year of construction: 2019, machine/vehicle number: div., functionality: fully functional, 2x ROLLEX ironing presses, for pre-ironing (PRE-IRON); working width: 2.25 m, Washing machine / dryer set Washing machine Milnor; load capacity: 65 kg; year: 2004 Dodewpi Rkspfx Albscl + Dryer Kannegiesser; load capacity: 50 kg; year: 2005 + Dryer Passat; load capacity: 50 kg; year: 1984

Condition: excellent (used), Year of construction: 1970, machine/vehicle number: T171 074 N, WITH HOT FOIL STAMPING DEVICE Dodpfx Alew Rcrpsbjcl Format: A4 Number of Colors: 1