Used Prepress Interface for sale (3,645)

Condition: used, Year of construction: 2007, controller manufacturer: Mitsubishi, controller model: TX-8i, _____ Description: Year of manuf. : 2007 Control : Mitsubishi TX-8i Turning length : 50 mm Mainspindle: Technology:Belt-driven spindle Speed:12.000 rpm Power:4 kW Torque:7 Nm Barcapacity:12 mm Movement in Z1:50 mm Workpiececlamping:Collet chuck Subspindle: Technology:Belt-driven spindle Speed:12.000 rpm Power:4 kW Torque:7 Nm Movement in X4/Z4:222/139 mm Rapid travers in X3/Z4:15 m/min Workpiececlamping:Collet chuck Toolcarrier I (X/Y): Technology:Turret with 6 stations (Complete drive) Taper:ø25 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Movement in X1/Y1:35/37,5 mm Rapid travers in X1/Y1:15 m/min Toolcarrier II (X/Z): Technology:Turret with 6 stations (Complete drive) Taper:ø25 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Movement in X2/Z2:35/37,5 mm Rapid travers in X2/Z2:15 m/min Front attachment: Number of stations:4 Taper:ø28 mm Hodoxnu S Iepfx Afienu Distance between stations:32 mm Tooldrive:12.000 rpm, 4 kW, 7 Nm Number of driven stations:4 Movement in X3/Z3:222/139 mm Rapid travers in X3/Z3:15 m/min Rear attachment: Number of stations:4 Taper:ø28 mm Distance between stations:32 mm Tooldrive:8.000 rpm, 1,5 kW, 2,4 Nm Number of driven stations:4 Movement in X4:39 mm Rapid travers in X4:15 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Coolant pump Rawmaterialfeed:Bar loader, FMB minimag 3200 Finishedpartremoval:Workpiecehandling (Tube) Oilmistseparation:Interface mechanical prepared Toolholder:Misc. static and driven toolholder Further Equipment:Rinsing pistol

Condition: used, mileage: 254,445 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, first registration: 07/2010, emission class: euro5, color: red, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, parking heater, soot filter, Internal vehicle number: 11053 Special equipment: Rubber floor covering in load/passenger compartment, Electrical package 1, Electrical interface for external use (CAN data bus), Chassis: Suspension and damping reinforced (suitable for poor road conditions), Windows in load/passenger compartment: - sliding 1.Rear wing doors with glazing, rear window heatable, with wiper system, interior unlocking tailgate / rear wing doors, Isofix mountings for child seat on rear seat, radio preparation, 2 loudspeakers, spare wheel with driving tires, seats in driver's cab: double passenger seat, seats in load/vehicle compartment: 1st row, 2-seater bench seat + 2-seater bench seat + 2-seater bench seat + 2-seater bench seat + 2-seater bench seat + 2-seater bench seat.2nd row, 3-seater bench seat (coil spring), lashing eyes in load compartment, auxiliary heater, gross vehicle weight 3.80 t Further equipment: Hedpfx Aeuqg Nqjfisnu Airbag driver/passenger side, Exterior mirrors aspherical, left, Exterior mirrors convex, right, Floor covering in cab: Rubber, Driver assistance system: Brake assist (HBA), Window in load compartment/FG compartment: - fixed, rear left, Window in load compartment/FG compartment: - Fixed, rear right, Window in load/cargo compartment: - Fixed, front left, Cabin filter: Pollen filter, Body/construction: Estate, Body variant: Normal roof, Child safety lock on sliding doors, Headlight range adjustment, Engine 2.0 Ltr. - 103 kW TDI, Non-smoking package, Wheelbase: 3400 mm, Headlights H4, Sliding door loading/passenger compartment right, Seat cover/upholstery: Fabric, Seats in cab: Adjustable driver's seat, Cladding in loading/passenger compartment: Half-height hardboard, Heat-insulating glazing

Condition: new, Year of construction: 2025, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Hnedpfjmhh Idex Afiou Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Comes to stock 54634 Bitburg

Condition: ready for operation (used), Year of construction: 2019, Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 10–5000 Number of axis 3 Movement X-Axis Movement 450 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Hjdpfjxnr Hvsx Afisnu Tools Type of tool holder SK40 This 3-axis EMCO Emcomat FB-450 MC was manufactured in 2019. It features a travel range of X450/Y350/Z400 mm, a fixed angle table of 800x400 mm, and a table load capacity of 450 kg. The spindle speed reaches up to 5000 rpm, complemented by a rapid traverse of 5000 mm/min. Includes a Sinumerik 828D interface with multi-touch display and a comprehensive 3-axis control package. If you are looking to get high-quality milling capabilities consider the EMCO Emcomat FB-450 MC machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, sheet width 3220 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 1.0 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm bending speed 120 Grad/sec back stop - adjustable ~ 10.0 - 1.400 mm adjustment speed 300 mm/sec compressed air 6.0 bar work height max. 869 mm voltage 400 V total power requirement 10.4 kW weight 3750 kg range L-W-H 4565 x 2950 x 2163 mm current new price ~ €150,000 from a maintenance workshop with very good equipment (!!) Features: - CNC electro-motor-driven universal folding machine * ??High-precision mechanics with modern control technology * For single and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - Rotating upper beam / as an automatic tool change system * With 2 tool stations (sharp and goat's foot bending rails) * Reduces setup and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model POS 2000 * Touch panel at the front right (can also be operated with a PC mouse) Hodpfexnqwtsx Afienu * Color display * USB interface * Automatic cutting calculation * Material and tool library * Accurate bending simulation * Windows XP operating system - Servo-driven control Drives * for bending/upper beam and electric backgauge - CNC electric lower beam adjustment - CNC electric backgauge * Travel speed 300 mm/sec. * With rear sheet support surface (stainless steel sheets) - 1x freely movable double foot switch - Operating instructions (PDF) Special accessories included: - 1x 30° upper tool sharpening rail - 1x split set of upper tool goat's foot rails, H = 130 mm - 1x 10.0 mm bending rail - 1x 25.0 mm bending rail

Condition: good (used), Year of construction: 2012, ITW BÜHLER WILSON HARDNESS TESTER SuperRockwell Hardness Testing Device BRIRO RK-Automatic Year of manufacture: 2012 Test height: 0-235 mm Throat depth: 145 mm with HM-Control evaluation system with RS-232 data interface for data transfer with settings for HR15N; HR30N; HR45N; HR15T; HR30T; HR45T used Hnedpfxsxnpvzj Afiou Weight: 150 kg

Condition: excellent (used), functionality: fully functional, ##### ATTENTION: SPECIAL PRICE DUE TO BUSINESS CLOSURE ##### Machine type: CNC control system Manufacturer: SIEMENS Model: Sinumerik 840 C / 840 CE Condition: Very good Offer type: Used machine Technical data: Note: Includes electronic handwheel, Flat operator panel CCFL, Hnjdpfxjw In Abe Afiju Version A, 1P 6FC 5103-0AD01-0AA0, V24 interface, Pendant mounting The machine is in very good and immediately operational condition and can be inspected and demonstrated at our premises at any time. We would be pleased if our offer meets your interest. Errors, modifications, and prior sale excepted.

Condition: used, Year of construction: 2019, High-precision, non-contact dimensional inspection system designed for shop-floor use. Ideal for measuring molded, turned, punched, or milled components with speed and accuracy. Features automated measurement routines, intuitive software interface, and comprehensive reporting tools. Robust construction ensures reliable performance in industrial environments. Perfect for quality control and production optimization. Hnodpoxnlypefx Afiou Machine has scratches on the measuring glass

Condition: as good as new (ex-display), Year of construction: 2023, Striebig Evolution 5224 - Demonstration machine / Exhibition piece Machine if desired with cutting optimization OptiDivide with label printer and label layout EVOLUTION - Precision, ergonomics and functionality perfectly combined Automatic functions, such as automatic locking and swiveling or automatic and swiveling or the automatic insertion and removal of the saw unit, make your your daily work. You too can benefit from the advantages of an EVOLUTION. It can be controlled via a 12" touchscreen computer. The intuitive user interface ensures perfect processing of your orders in every detail. Comprehensive standard equipment 12" touchscreen computer with optimum operator guidance Laser-supported display of the horizontal cut Digital measuring system DMS-XY Automatic saw beam locking with interface detection Automatic locking and swiveling of the saw unit Automatic infeed and outfeed of the saw unit Automatic fine adjustment of the saw unit Operating hours counter Tool database ALU center support over the entire machine length Integrated, powerful TRK dust extraction system. Dust limit value around 1mg/m³ Control cabinet attached directly to the saw frame Supersilent sound insulation Scoring unit: VSA scoring saw infinitely adjustable Complete free-standing support Complete aluminum small parts support UPS 24 VDC for Touch PC Uninterruptible power supply Weight of the saw approx. 1,100 kg Cutting depth 80 mm Saw motor power 5.5 kW (7.5 HP) Saw blade diameter 300 mm Saw blade bore 30 mm Emission sound pressure level at the workplace LpA 83 dB *3 Saw blade speed 4800 rpm 1 extraction nozzle ø 140 mm Compressed air connection 6-10 bar Connected load 7.5 kW Mains connection 3 x 400 V / 50 Hz Dimensions in mm: Type L H T1 free T2 wall 5224 5645 3018 1741 1361 Cutting range in mm: Type LS HS(vert) HS horizontal 5224 4300 2240 2100 Location: Ex stock 54634 Bitburg - immediately available - Hedjvkp H Aopfx Afionu

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 1340 mm Measurements depth 1900 mm Measurements height 2380 mm Machine weight 3300 kg Main Drive Pressing force 360 kN Bending length 1020 mm Stroke 120 mm Movement Y-Axis Rapid Traverse 25 mm/s Hnodpfxjxnr E Se Afieu This TRUMPF TruBend 7036 press brake was manufactured in 2018. It features a press force of 360 kN and a bending length of 1020 mm. The machine includes a Touchpoint TruBend operating interface and offers a maximum stroke of 120 mm. Dimensions are 1900 mm in length, 1340 mm in width, and 2380 mm in height, weighing 2600 kg. If you are looking to get high quality bending capabilities consider the TRUMPF TruBend 7036 machine we have for tact us for more information. Application Types Bending

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Hnjdpfx Afsxnlf Eoieu

Condition: used, Krones PET Block 54/8 Monobloc Filler–Capper – Overview The Krones PET Block 54/8 is a second‑hand monobloc composed of a rotary isobaric filler and rotary screw capper for PET bottles. Engineered for beverage production and industrial packaging, this unit is ideal for integrating into a used bottling line requiring counter‑pressure filling and PCO 1881 closure application. With 54 fixed filling valves and an 8‑head capper, it delivers reliable performance on large PET formats with precise neck handling. Technical Specifications & Performance Data Configuration: Monobloc Filler–Capper (filler + capper; no rinser module) Filling technology: Isobaric, fixed-valve counter‑pressure Number of filling valves: 54 Valve pitch (center distance): 126 mm Capper: 8-head rotary screw capper for plastic closures Neck finish: PCO 1881 (short finish) – plastic screw caps Bottle materials: PET Nominal capacities: 1.5 L = 9,000–10,000 bph; 3.0 L = 7,000–8,000 bph Machine rotation: Clockwise Overall dimensions: L 3.8 m, W 3.2 m, H 2.65 m Approx. weight: 7,500 kg Reference: M302 Module Details Filler carousel: 54 valves, designed for carbonated beverages and counter‑pressure operation; suitable for still beverages with inerting depending on product setup. Capper turret: 8 capping heads optimized for PCO 1881 plastic screw caps; consistent application torque and bottle neck handling for PET containers. Advanced Automation & Control Systems PLC platform: Siemens S7 for process control, diagnostics and integration. Signal and I/O: Provision for standard digital signals to synchronize with upstream/downstream equipment on a used bottling line. Process control: Counter‑pressure phases managed via PLC for stable fill levels and CO₂ retention. Production Line Integration Capabilities Line compatibility: Ideal for beverage production environments seeking to upgrade or expand a second hand industrial packaging line. Upstream equipment: Can interface with external bottle rinsers or blow molding machines (not included). Downstream equipment: Compatible with conveyors, labellers, packers and palletizers. Handling system: PET neck handling for stable transfer between filler and capper. Machine Condition & Maintenance History Hsdexnlduepfx Afienu Status: In storage; filler dismantled and stored. Operating readiness: Operating after scheduled service/maintenance. Power: Not connected. Operating hours: Not set. Typical availability: Unit can be prepared for dispatch after service with a standard lead time. Operational Performance & Versatility Process benefits: Isobaric fixed-valve design supports low-foam filling, minimized oxygen pickup and consistent fill volumes on large PET formats.

Condition: used, Year of construction: 2017, Machine Description for 2017 Model: Horizontal Machining Center NHX 5000 Hnsdpexnkgnjfx Afieu Manufacturer: DMG MORI Co. Ltd. Type / Model: NHX 5000_M730UM, Series J-NHX5000-C_C01 Year of Manufacture: 2016 Control System: MAPPS M730UM with CELOS / 21.5" ERGOline Touch Technical Data: • Working Area / Travel: - Travel X / Y / Z: 730 / 730 / 880 mm - Pallet size: 500 × 500 mm - Max. workpiece diameter: 800 mm - Max. workpiece height: 1,000 mm - Distance spindle center to pallet surface: 80 – 810 mm - Distance pallet center to spindle reference plane: 70 – 950 mm - Pallet load: 500 kg [optional 700 kg] - Number of pallets: 2 - Minimum table indexing angle: 1° [optional 0.001° rotary table] • Performance / Spindle Speed / Drive Power: - Spindle type: speedMASTER® motor spindle - Spindle speed range: 35 – 15,000 rpm - Power: 30.7 / 26 / 18.5 kW (15% ED / 30 min / continuous) - Torque: 207 / 95.5 Nm (10% / 100% duty cycle) - Tool taper: BT40 / #40 - Tool magazine capacity: 40 tools [optional: 60 / 120 / 180 / 240] - Max. tool diameter: 70 mm (adjacent) / 170 mm (free) - Max. tool length: 550 mm - Max. tool weight: 12 kg - Tool change time (chip-to-chip): 2.5 s - Rapid traverse X/Y/Z: 60 m/min - Feedrate range: 0 – 60,000 mm/min - Acceleration: 1 G • Weight / Dimensions / Electrical Connection: - Machine weight (incl. coolant tank): approx. 12,000 kg - Installation footprint (W × L): 3,078 × 4,784 mm - Overall height: 2,852 mm - Coolant tank capacity: 800 L - Power supply: 37.3 kVA - Compressed air: 0.5 MPa / 420 L/min Equipment / Accessories: - NC rotary table with 0.001° indexing (DDM optional) - Automatic 2-pallet changer (rotary APC) - Two pallets with threaded holes and hydraulic fixture interface - Chip conveyor (rear discharge) - Direct measuring systems on X/Y/Z axes - Renishaw OMP60 spindle probe system - Tool breakage monitoring in the magazine - High-pressure coolant interface (70 bar, Knoll) - Coolant/air switching device for through-spindle supply - Rotating inspection window - Coolant gun - Oil mist separator interface Ø200 mm (LTA AC3002 optional) - Automatic loading station door - Signal tower (red/yellow/green/blue) - Portable manual pulse generator (handwheel) - Air filter unit for clean compressed air supply - 45 kVA transformer - Knoll KF110/700 high-pressure coolant unit (7.0 MPa, 31 L/min) - Three hydraulic clamping towers with double-jaw chucks - CELOS system with apps (Production, Accessories, Support, Monitoring, Configuration) - MAPPS M730UM control with 21.5" touchscreen and 15.6" sub-display - SmartKey® operator access management This technical description follows industry standards for horizontal machining center listings, ensuring clarity for prospective buyers on leading platforms such as Machineseeker.

Condition: good (used), Simatic Panel, Operator Panel, Machine Control, Interface Panel, Control Unit, Operating Panel, Keyboard, Control Panel Teachpendant -Manufacturer: B&R, control panel Operator Panel with signal column -Type: 4PPC70.0702-20B -Signal tower: Banner TL50HGWRQ -Transport dimensions: 1000/420/H180 mm Hnsdpfx Aexnix Ajfiou -Weight: 13 kg

Condition: excellent (used), Year of construction: 2011, Machine Data Holzma HPP 380/43/43/R + Bargstedt TLF 210/10/05 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rail (2-track element): 11 units Technical Specifications: Saw blade projection: 95 mm Main saw motor: 18 kW Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Total connected load: 29 kW Power Control CADmatic 4.0 control with 17" flat display Hsdpfoxivbaex Afisnu Grooving program, cut-out/and stress-relief cut program Labeling / labeling software / label printer PICA 108 Data interface for warehouse systems and optimization software Schnitt-Profit Professional Bargstedt Optimat TLF 210/10/05 Storage System Carrier length: 13.45 m Span approx. 12.5 m Rotary drive with 1* loading and 1* unloading station Maximum stack height in storage: 1700 mm Max. workpiece size: 4200 x 2070 mm Ex location - Immediately available - Inspection possible

Year of construction: 2021, operating hours: 5,797 h, condition: ready for operation (used), This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Hnjdpfsxnd Skex Afisu Application Types Injection Moulding

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Hnsdpfx Asxnldbofieu

Condition: used, Year of construction: 1999, Sarcmi–Simonazzi Bluestar 90/15H p.110 Rinser -Filler–Capper Monoblock – Full Overview with new capper turret YOM 2026 This rotary isobaric Rinser–Filler–Capper Tribloc is a second‑hand, reconditioned solution engineered for PET beverage production. Built in 1999 and fully revised in 2025/2026, it features a brand‑new Adroit capping turret and Siemens automation. Designed for still water and carbonated soft drinks, the unit combines high throughput with precise counterpressure filling, making it ideal for modern industrial packaging plants and used bottling line upgrades. Hnodpfxjxnk U Sj Afieu Technical Specifications & Performance Data General machine data Type: Rotary Tribloc with starwheel transfer (rinser–filler–capper) Working direction: Counterclockwise Container material: PET Current format: 2,000 ml square bottle Machine pitch: 110 mm Maximum container height: 350 mm Nominal speed: up to 24,000 bph (reference 2.0 L) Hot fill: No | Aseptic: No CO2 system: Yes (isobaric/counterpressure filling) Work table height: 1,100 mm Approx. dimensions: 8,000 × 5,600 × 2,500 mm Approx. weight: 7,500 kg Year of manufacture: 1999 | Major revision: 2025/2026 Rinser Brand: Simonazzi 100 grippers/clamps Filler Technology: Isobaric rotary filler (counterpressure with CO2) Number of filling valves: 90 Optimized for: Still water and soft drinks (CSD) Capper New capping turret: Adroit (installed during 2025/2026 overhaul) Number of capping heads: 15 Cap feeder: 2017 Utilities & electrical Power supply: 380 V – 3 Ph – 50 Hz Installed power: 23 kW Compressed air: 6 bar Advanced Automation & Control Systems PLC: Siemens S7 HMI: Siemens operator panel for recipe management, diagnostics and format change support Process control: Counterpressure filling with CO2 for stable performance on carbonated beverages Documentation: Operation and maintenance manuals available The Siemens control architecture supports consistent cycle synchronization across rinser, filler, and capper, enhancing uptime in second‑hand industrial packaging environments. Production Line Integration Capabilities Upstream/downstream interfaces for conveyors in a used bottling line Starwheel transfer aligned to 110 mm pitch for format handling Compatible with PET bottle supply from depalletizer or blow molder (not included) Cap handling via dedicated feeder (2017) to the new Adroit turret Typical connections: CO2 line for counterpressure, product feed, CIP return/supply, air and electrical This Tribloc is well suited for beverage production plants seeking a compact rinser–filler–capper block to increase capacity or replace legacy equipment while maintaining high line efficiency.

Condition: used, Year of construction: 2021, Machine Description for 2021 Model: Horizontal Machining Center NHX 5000 Manufacturer: DMG MORI Bielefeld Hilden GmbH Hnsdpfx Afsxnkdmsieu Type / Model: NHX 5000, Fanuc 31iB with CELOS ERGOline Touch Year of Manufacture: 2021 Control System: FANUC 31iB with CELOS / 21.5" Multi-Touchscreen / MAPPS system Technical Data: • Working Area / Travels: - Travel X / Y / Z: 730 / 730 / 880 mm - Pallet size: 500 × 500 mm - Pallet quantity: 2 (with threaded holes) - Minimum B-axis indexing angle: 0.001° (DD direct drive) - Max. rotary table speed: 100 rpm - Pallet load: 500 kg - Hydraulic coupling with 2 hydraulic and 2 air circuits (max. 7 MPa) - Automatic indexing setup station • Performance / Spindle Speed / Drive Power: - Spindle: speedMASTER® motor spindle - Speed range: 35 – 20,000 rpm - Power: 37 / 26 / 18.5 kW (15% / 30 min / continuous duty) - Torque: 221 / 107 / 86.8 Nm - Tool taper: SK40 (7/24 taper, face contact) - Tool magazine capacity: 60 tools (ring-type, random selection) - Max. tool diameter: 70 mm (adjacent) / 170 mm (free) - Max. tool length: 550 mm - Max. tool weight: 12 kg - Chip conveyor: rear discharge with drum filter - Through-spindle coolant interface (8-step pressure control, up to 7 MPa) - Coolant / air switching via spindle - External coolant system: INTERLIT TMF300/600 compact filter unit (70 bar / 32 L/min) • Weight / Dimensions / Electrical Connection: - Machine weight: approx. 12,000 kg - Coolant tank capacity: 800 L - Transformer: 54 kVA - Power supply: 400 V, 50 Hz Equipment / Accessories: - Renishaw OMP60 spindle probe system (optical transmission) - Tool breakage detection system in the magazine - Hydraulic coupling on both pallets with integrated pressure regulation (7 MPa) - Automatic door for setup station - Rotating inspection window (air-driven) - Oil mist extraction system: LTA AC3002 (1,050 m³/h, dual electrostatic stages) - INTERLIT TMF300/600 high-pressure coolant filter system (70 bar, 32 L/min) - EtherNet/IP robot interface - IoTconnector, NETservice, Machine Data Connector (MDC), DMG MORI Messenger - CELOS with touchscreen and MAPPS functionality - Four-color signal light tower - Handheld control device (mobile handwheel) - Central coolant preparation for through-spindle supply - Drain circuit for auto-coupler (to prevent pressure drop) - 10 programmable external M-codes - 2 hydraulic clamping towers (each with 6 hydraulic 2-jaw chucks, GHHY-2B-200.00/K) - Voltage: 400 V, 50 Hz configuration - Air filter unit (T105A-1000MSP) This summary uses industry-standard terminology and structure suitable for platforms such as Machineseeker or TruckScout24.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, INDEX MS40-6 CNC Multi-Spindle Year of Manufacture: 2011 Commissioned: 2012 Control: Siemens 840D (Dual NCU) Bar Capacity: 40 mm Slide Units Position 1.1: X / Z NC controlled Position 1.2: X / Z NC controlled Hnodpfx Afoxndgzoisu Position 2.1: X / Z NC controlled Position 2.2: X / Z NC controlled Position 3.1: X / Y / Z NC controlled (Y ± 21 mm) Position 3.2: X / Z NC controlled Position 4.1: X / Z NC controlled Position 4.2: X / Z NC controlled Position 5.1: X / Z NC controlled Position 5.2: X / Z NC controlled Position 6.1: X / Z NC controlled Position 6.2: X / Z NC controlled Position 6.3: X NC controlled, Z fixed Bar Feed IEMCA SIR MS40/33/P magazine bar loader Workpiece Handling Parts chute at spindle position 6 Workpiece conveyor at spindle position 6 Synchronization unit at spindle position 6.1 Parts ejector Coolant feed preparation through counter spindle Back-Working Attachment at slide position 6.2 Up to 3 fixed toolholders Auxiliary Drive Preparation Electrical preparation for 2 auxiliary drives with electronic shaft (positions 1–3), synchronous with main and counter spindle Electrical preparation for 2 auxiliary drives with electronic shaft (positions 4–6), synchronous with main and counter spindle Compatible with auxiliary drives with incremental encoder (double module) Chip & Coolant System Hinge-belt chip conveyor (cross type), discharge height 1200 mm, front discharge with lift pump for filter unit Coolant filtration unit (50 Hz): Coolant tank: 800 L Vacuum rotation filter: 650 L capacity Plate heat exchanger for coolant cooling Heat exchanger pump: 80 L/min 7 bar Low-pressure pump: 300 L/min 4 bar High-pressure pump: 55 L/min 40 bar Safety & Environmental Automatic CO₂ fire extinguishing system with optical/thermal detection Preparation for central exhaust system Shut-off flap for central oil mist extraction Control Options & NC Functions 16/16 freely programmable I/O interface Transmit / Tracyl function (milling cylindrical paths on OD and face) Dual transmit function for Y-axis transformation NC option: counter spindle / polygon turning with electronic shaft Process Monitoring Integrated ARTIS monitoring system based on torque, current, or power evaluation Up to 4 channels (max. 8 drives) monitoring 4 tools simultaneously at stations 1–3 Up to 4 channels (max. 8 drives) monitoring 4 tools simultaneously at stations 4–6

Condition: new, Year of construction: 2025, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives Hodpfepdqzxex Afienu - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Year of construction: 2024, condition: ready for operation (used), Main Drive Spindle speed range 3400 Number of axis 3 Movement X-Axis Movement 213 mm Y-Axis Movement ±51 mm Z-Axis Movement 572 mm This 3-axis HAAS ST-25Y horizontal turning machine was manufactured in 2024. It features a 254 mm hydraulic chuck, a BMT65 turret with 12 positions, and live tooling capabilities up to 4,000 rpm. The machine includes a 1 GB standard program memory, a coolant tank of 208 liters, and an Ethernet interface. If you are looking to get high-quality turning capabilities, consider the HAAS ST-25Y machine we have for sale. Contact us for more information. Application Types Turning Hnedsxnd Tuepfx Afisu

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: G22SJ2207......., The iCombiPro is the latest combi-steamer from RATIONAL. The iCombiPro 20-2/1 Gas model (natural gas H) with 20 GN 2/1 or 40 GN 1/1 tray slots is easy to operate even for untrained staff, as you can achieve outstanding food quality without supervision. The unit has been tested in our in-house specialist workshop and is fully operational. The ultra-fast interim and self-cleaning functions keep your device spotless. The combi-steamer is available from 44 kW upwards. You will receive an invoice with VAT shown separately. If you are looking for a specific Rational appliance type, contact us – we have access to an extensive range of used and new equipment. • 6 months warranty on all electrical components • High-quality brand equipment at fair prices • Professional, expert advice – before and after purchase • Flexible options for shipping or self-collection • Operating manuals, wiring diagrams & spare parts provided • Trade-in of your combi-steamer, model year 2004 or newer • Complete accessory program at attractive prices The iCombi Pro from Rational sets a new standard in intelligence, efficiency, and flexibility. Condition: Used, tested, and fully functional Technical Data: • W x D x H: 1082 x 1117 x 1872 mm • Minimum door opening size for transport WxH: 1200x1900 mm • Serial number: G22SJ2207..... • Year of manufacture: 2022 • Max. load per tray: 5 kg • Max. total load: 100 kg • Weight (gas version): 358 kg • Electrical connection requirements: • Voltage: 1 NAC 230 V • Gas connection power: 80 kW • Fuse protection: 16 A • Water connection requirements: • Water inlet (pressure hose): 3/4 inch • Water drain: DN 50 Hnodpfx Aoxnbvaofisu Further specifications: • Temperature range: 30°C to 300°C • Senses current cooking chamber conditions • Detects size, load, and product state for optimal browning • Learns frequently used cooking habits and applies them • Determines the ideal cooking path to the desired result • MyDisplay – customisable, user-specific operating display • TFT color display and touchscreen • Operation and application manuals available on the device display • Core temperature probe with automatic error correction and positioning aid • Glass-panelled door compartment for energy efficiency • LED interior lighting • Includes energy consumption display • Humidity control: percentage-accurate measurement and setting • Individual programming of at least 350 cooking programs with up to 12 steps each • Three-stage steam injection adjustable • USB interface • High-performance fresh-steam generator with automatic descaling • Five programmable fan speeds • Integrated, maintenance-free grease separation system without additional grease filter • Cool-down function: rapid cooling of the cooking chamber • Automatic adaptation to installation location (altitude, climate, etc.) • Appliance door with triple glazed, ventilated glass and hinged inner panel • Waste water fixed connection compliant with SVGW • IP X 5 water jet protection • Separate solenoid valves for soft and warm water up to +30°C • Automatic start time pre-selection with date and time • Inner and outer material: stainless steel DIN 1.4301 • Integrated WiFi module Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by prior arrangement

Condition: used, Year of construction: 2004, operating hours: 45,000 h, Used Blow Molding Machine KOSME KSB 4L up to 6800 bph The KSB 4L blow molding machine is built specifically for producing PET bottles. Notably, it offers a robust, compact solution for high-performance production. Its design is both innovative and technically straightforward. As a result, it ensures optimal efficiency and a high quality-to-price ratio. With four cavities, it effectively produces up to 6,800 bottles per hour. In addition, it accommodates formats from 0.1 to 2.5 liters. The solid, well-organized structure of the KSB 4L provides operators with flexibility and reduced maintenance needs. Furthermore, the machine has completed 22,000 hours of operation. It also includes two original molds, one for 0.5 liters and one for 1 liter. Heating system and preform feed in the Blow Molding Machine KOSME KSB 4L To achieve its heating capabilities, the KSB 4L’s heating system uses four heating modules and eight heating provides a heating capacity of 46 kW. Moreover, its patented positioning system places infrared lamps precisely, thereby ensuring optimal external heating of preforms without opening the oven. For efficiency, the conveyor belt system for preform feed orients and positions the preforms. It streamlines the heating process and thus reduces preparation times. Blowing process and production efficiency Furthermore, the Blow Molding Machine KOSME KSB 4L’s pneumatic preform separation system adjusts the preforms’ distance from 40 mm in the oven to 120 mm in the mold. Then, the blowing process operates in a fully replaceable station, which adapts to different bottle diameters as needed. Afterward, the transfer unit moves heated preforms into the mold cavities, where they undergo sealing, stretching, and blowing. Each cavity consequently produces up to 1,700 bottles per hour, thereby achieving high precision and stability in production. Hnodpfx Aevgvb Eofiju Consumption and energy requirements In terms of energy, the KSB 4L operates on a voltage of 3 x 230/400 V, with a frequency of 50 or 60 Hz, an installed power of 56 kW, and an average consumption of 36 kW. Additionally, the compressed air system maintains a working pressure of 10 bar and a blowing pressure up to 40 bar, consuming 470 Nm³/h of air. In addition, the cooling system requires a water flow of 6.6 m³/h at an inlet temperature of 5 to 7 °C, achieving a cooling capacity of 20.8 kW. Operator advantages and maintenance Notably, the design allows easy access to all internal components, thereby enabling quick format changes and simplifying mold replacement, which takes an average of only 30 minutes. Furthermore, its linear movement arrangement and durable construction materials minimize maintenance needs. Additionally, the touch-screen interface lets operators input parameters for different types of preforms and bottles, and the system offers password protection to enhance operational security. Conclusion of the Blow Molding Machine KOSME KSB 4L In conclusion, the KSB 4L serves as an ideal solution for those seeking a reliable and high-performance used machine that produces PET bottles with precise specifications and optimized consumption.

Condition: new, Year of construction: 2024, EVOLUTION - precision, ergonomics and functionality perfectly combined Automatic functions, such as automatic locking and swiveling or automatic plunge-cutting and ejection of the saw unit, make your daily work much easier. your daily work. You too can benefit from the advantages of an EVOLUTION. It can be controlled via a 12" touchscreen computer. The intuitive user interface ensures perfect processing of your orders in every detail. Comprehensive standard equipment 12" touchscreen computer with optimum operator guidance Laser-supported display of the horizontal cut Digital measuring system DMS-XY Automatic saw beam locking with interface detection Automatic locking and swiveling of the saw unit Automatic infeed and outfeed of the saw unit Automatic fine adjustment of the saw unit Operating hours counter Tool database ALU center support over the entire machine length Integrated, powerful TRK dust extraction system. Dust limit value around 1mg/m³ Hnedpfx Afshf Dqboiju Control cabinet attached directly to the saw frame Supersilent sound insulation Scoring unit: VSA scoring saw infinitely adjustable Complete free-standing support Paper holder High-end grid made of synthetic materials Small parts support aluminum complete UPS 24 VDC for Touch PC Uninterruptible power supply Weight of the saw approx. 1,100 kg Cutting depth 80 mm Saw motor power 5.5 kW (7.5 HP) Saw blade diameter 300 mm Saw blade bore 30 mm Emission sound pressure level at the workplace LpA 83 dB *3 Saw blade speed 4800 rpm 1 extraction nozzle ø 140 mm Compressed air connection 6-10 bar Connected load 7.5 kW Mains connection 3 x 400 V / 50 Hz Dimensions in mm: Type L H T1 free T2 wall 6224 6645 3018 1741 1361 Cutting range in mm: Type LS HS(vert) HS horizontal 6224 5300 2240 2100 Location: Ex stock 54634 Bitburg - immediately available -