Used Precision Mechanics for sale (11,425)

Condition: used, Year of construction: 2008, sheet width 1530 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 34 Hub/min Ffjdpfx Ajxyln Rjc Nsu cutting angle 2.70 Grad distance between columns 1540 mm work height max. 920 mm Control konv. voltage 400 V engine output 3.2 kW weight of the machine ca. 1115 kg. range L-W-H 2275 x 2220 x 1400 mm Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear * Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch - Front, extendable table extension - Rear safety device - Original operating instructions * Optional accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: ready for operation (used), Year of construction: 1997, sheet width 3230 mm plate thickness 2.5 mm thickness at "Niro-steel" 1.5 mm no. of strokes 28 - 42 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control ELGO 87P engine output 6.8 kW weight of the machine ca. 3410 kg. range L-W-H 4070 x 2070 x 1400 mm from a maintenance workshop including special accessories (!!) Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - NC electro-motorized back stop - including NC ELGO "TYP 87P" digital control unit * adjustable from the front right * with target/actual value position input * continuous adjustment over the entire travel range * rough adjustment via push buttons * protection of the limit values ??with limit switch - "Duo-Cut" drive with two dynamic, powerful gear motors - support table with recessed grips - hold-down bar with hard rubber strip - all-steel knife with two cutting edges - selector switch for single and continuous stroke Fsdpfx Ajxacd Noc Nofu - 1x freely movable foot switch - safety device at the rear - original operating instructions Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts - 1x extra long side stop, including support foot + digital stop - 2x extra long, front support arms * with "SLIDING" mount - for easy moving

Condition: used, sheet width 3100 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 36 Hub/min cutting angle 0.9 Grad table height 800 mm table width 430 mm distance between columns 3200 mm back stop - adjustable 5.0 - 750 mm Control konv. engine output 3.0 kW weight of the machine ca. 1950 kg Ffsdpfjxcyw Esx Ac Neu range L-W-H 3730 x 2070 x 1400 mm Original price approx. 45.000 euros (!!) Special price on request Features: - Robust / motorized swing-cut guillotine shears - Machine with manual material/backgauge * Travel range 5.0 – 750 mm stop depth * Analog position display * Manual adjustment from the front - Break-proof, torsion-free steel welded construction - Compact and clear machine design - 1x hold-down beam * Hold-down opens before the knife beam moves up * No kinking of very sensitive sheets - Manual cutting gap adjustment - Integrated sheet metal holding system for thin sheet metal cuts - Sheet metal/cut material removal at the front (operator side) - 1x side stop with mm scale - 3x table extensions - 1x freely movable foot switch - Operating instructions (PDF

Condition: good (used), Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand crimping pliers, sleeve pliers, clamp sleeve pliers Fjdeb A S Uvepfx Ac Njfu -Manufacturer: WMW, hand crimping pliers type PH 2.5C -Crimping: of cable lugs and cable connectors -Pressing force: 25.0 N -Pressing stroke: 15 mm -Transport case: incl. accessories, see photo -Quantity: 1x crimping pliers available -Price: per piece -Dimensions of pliers: 600/180/H25 mm -Total weight: 3.2 kg

Condition: good (used), Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand crimping pliers, sleeve pliers, clamp sleeve pliers Fjdpfxewup Efe Ac Nofu -Manufacturer: Klauke, hand crimping pliers type K05 -Crimping: of cable lugs and cable connectors -Standard version: 6 - 50 mm -Dimensions: 390/140/H50 mm -Weight: 1.1 kg

Condition: good (used), Polishing bench, polishing machine, grinding machine, polishing stand, upright, precision grinder, Electer Fsdpfsk D Ntvjx Ac Nefu -Testa: MINIPOL-T with NSK precision grinder and accessories -Precision grinder: Type NSK Electer ET NK-260 N -Accessories: see photos -Transport dimensions: 310/120/H250 mm -Weight: 8.2 kg

Condition: good (used), Precision four-jaw chuck, chuck, faceplate, 4-jaw chuck, four-jaw chuck -Manufacturer: Klopfer, precision four-jaw chuck Ø 165 mm -Passage: Ø 49 mm -Recording: MK4 -Jaws: individually and fully adjustable Fodjwub Tzepfx Ac Njfu -Dimensions total: Ø 165 x 230 mm -Weight: 13.6 kg

Condition: good (used), Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -Chuck size: Ø 192 mm -Beeks: individually and completely adjustable -Passage: Ø 51 mm Fsdpfed S Rftsx Ac Njfu -Weight: 14.5 kg

Condition: used, three-jaw chuck, three-jaw lathe chuck Fsdpfxoux Safs Ac Njfu -Manufacturer: SCA Skand Chuckfabriks, precision three-jaw chuck chuck size Ø 230 mm -Jaws: individually and fully adjustable -Passage: Ø 66 mm -Bolt circle: Ø 193 mm / M12 -Dimensions: Ø 230 x 130 mm -Weight: 21.2 kg

Condition: used, Ball bearings, bearings, bearing set, accurate, radial ball bearings, roller bearings -Type: 71944CTP2HUL -Lubricating groove -Bore: Ø 220 mm Fedpfjd Nw H Dsx Ac Nefu -Outer diameter: 300 mm -Width: 75 mm -Number: 4x bearings available -Price: per piece -Weight: 14 kg

Condition: used, Precision four-jaw chuck, chuck, face plate, 4-jaw chuck -Manufacturer: Rohm, precision four-jaw chuck O 260 mm -Throughout: Ø 70 mm -Hole circle: Ø 170 mm -Shot: short taper 8 -Beeks: individually and completely adjustable Ffsdpfx Ashf Ni Esc Nou -Weight: 39 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 270 mm -Throughout: Ø 85 mm Fedpfx Aced Itcgo Njfu -Short taper: 6 -Recess: 157 mm -Weight: 38 kg -with: signs of usage but functional

Condition: used, Precision bending beam for glass cutting table, glass cutting table, glass cutting machine -Manufacturer: INNOLAS S100-5N -Type: NJ Y123/101 Fsdpfjb Nkt Eox Ac Nefu -Weight: 0.1 kg

Condition: good (used), Well-running Schaublin with attachments as per pictures with Ffsdpfeyaaztjx Ac Neu many shots

Condition: good (used), Scope as per images Continuously variable speed from 15 to 3,000 rpm Fodpfsx U D D Aex Ac Njfu Drive 2.2 kW

Condition: refurbished (used), functionality: fully functional, center height: 100 mm, grinding length: 650 mm, Internal & external cylindrical grinding machine Studer S20-2 Centre distance: 650 mm – Centre height: 100 mm Accessories on request! Fodpfeqv Eg Rex Ac Nofu Ready for delivery!

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja Fsdpfou Icp Ajx Ac Njfu cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop - back gauge with linear scale, operation with hand crank i.D. *

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Ffjdsu Nfinopfx Ac Neu Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: used, RA1851 electromechanical pusher installed in a support frame made of aluminum profiles Function: Push-off of the incoming material 90° to the conveying direction Make: Transnorm outer dimensions of the frame: LxWxH=1.720x1.080x940 mm suitable for infeed conveyor up to 1000 mm total width dimensions of the push-off panel: H=600 mm, W=650 mm total weight: 108 kg Fjdpfsk Abhdjx Ac Nofu Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, electro-mechanical pull installed in a mounting frame made of aluminum profiles Function: Deportation of the incoming material 90° to conveyor direction Make: Transnorm Measurement of the mounting frame: Lxwxh = 1.075 1.125 x 1 000 mm Measurement of the Abschiebepaneels: H = 600 mm, 650 mm, B = Total weight: 108 kg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Ffjdpfx Ask Aa E Usc Nou Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2012, operating hours: 600 h, functionality: fully functional, total length: 3,100 mm, sheet thickness aluminum (max.): 3 mm, overall weight: 4,650 kg, Equipment: documentation/manual, Mechanical CNC folding machine CIDAN Futura 30 Year of manufacture: 2012 Technical data: Working length: 3100 mm Max thickness of steel sheet: 2 mm Max thickness of stainless steel sheet: 1.25 mm Max thickness of aluminium sheet: 3 mm Beam opening: 195 mm Bending beam motor power: 2.2 kW Clamping beam motor power: 2.2 kW Fedpfx Aex Tv T Hsc Nefu Machine dimensions: length 4100 mm, width 2300 mm, height 1845 mm Weight: 4650 kg Equipment: CNC control with ProLink S graphics Powered rear stop type SBG 15-30-T-30L-20R Rotating upper beam type COMBI MULTIFOLD – segmented lower and bending beam tools with SBG 15 table, height adjustable 0–45 mm Mechanical adjustment of the gap between beams Bending beam bar 10 and 20 mm with quick clamping system Lower beam bar Manual crowning compensation of bending beam Three-button foot pedal Info: Price of a new machine with the above-mentioned equipment: 122,900.00 EUR + VAT

Condition: good (used), Year of construction: 1997, machine/vehicle number: 1704, Offer 25509 Technical Data: - Workpiece clamping diameter up to 150 mm - Maximum clamping height with punch grinding device 130 mm - Grinding wheel diameter: 125 mm - Grinding wheel width: 26 mm - Cutting speed: 20 m/s - Workpiece rotational speed: 40 rpm Ffedpfx Aox Tp Uqoc Nsu - Infeed rate: 0.1 mm/min - Grinding spindle speeds: 2800 - 3600 rpm - Regrinding allowance per cycle: 0 - 0.5 mm - Drive 400 V / 1.1 kW - Coolant system - Space requirement approx.: W 600 x H 1800 x D 600 mm - Weight approx.: 150 kg

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Fodpfx Ajw N Rh Asc Nofu Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 X resolution 0.001[mm] Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: new, Year of construction: 2026, Features and applications Base made of durable cast iron, approx. HRC 40, fixed and movable steel jaws about HRC 48–52 Possibility of repositioning jaw inserts for increased work area Movable jaw design provides additional clamping of the workpiece to the base ±0.015 mm allowed base height deviation Possibility of using a number of vices at once Used with milling machines, boring machines, CNC machines QM16200N technical data Jaw width 200 mm Jaw height 50 mm Maximum L1 jaw opening 190 mm Maximum L2 jaw opening 275 mm Maximum L3 jaw opening 385 mm Maximum L4 jaw opening Ffsdpfevxgwzjx Ac Nsu 470 mm Transverse bar width 18 mm Longitudinal bar width 18 mm Drive shaft hexagonal head 19 mm Dimensions 517×200×135 mm Weight 47 kg

Condition: new, Year of construction: 2026, Vice used with grinding, milling and boring machines, as well as EDM machines, CNC machines and machining centres. Features and applications Base made of durable cast iron, approx. HRC 40, fixed and movable steel jaws about HRC 48–52 Possibility of repositioning jaw inserts for increased work area Movable jaw design provides additional clamping of the workpiece to the base ±0.015 mm allowed base height deviation Possibility of using a number of vices at once Used with milling machines, boring machines, CNC machines QM16125N Technical data Jaw height 125 mm Jaw width 38 mm Maximum L1 jaw opening 112 mm Maximum L2 jaw opening 165 mm Maximum L3 jaw opening 250 mm Maximum L4 jaw opening 305 mm Fjdpfxsvxgugs Ac Njfu Transverse bar width 14 mm Longitudinal bar width 14 mm Hexagonal head of the drive shaft 14 mm Dimensions 338×126×106 mm Weight 16 kg