Used Dvpn 75 for sale (6,884)

Condition: ready for operation (used), Year of construction: 2023, operating hours: 362 h, functionality: fully functional, machine/vehicle number: 12430021383, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl Operate, spindle speed (max.): 20,000 rpm, Auction of a DMG DMU 75 Monoblock + Pallet Handling PH150! Only 362 spindle hours! TECHNICAL DETAILS Travel in X-axis: 750 mm Travel in Y-axis: 650 mm Travel in Z-axis: 560 mm Main drive and spindle Main drive: AC motor, digitally controlled Motor spindle: speedMASTER Warranty period of the motor spindle: 36 months Speed range: max. 20,000 rpm Spindle mount: HSK-A 63 Acceleration time: approx. 2.6 s Deceleration time: approx. 2.6 s Fodpfx Akoz I Tcieyspn Drive power at 40% duty cycle: 35 kW Drive power at 100% duty cycle: 25 kW Spindle torque at 40% duty cycle: 130 Nm Spindle torque at 100% duty cycle: 86 Nm Spindle bearing inner diameter (front): 80 mm Spindle bearing inner diameter (rear): 55 mm Number of T-slots: 4 × 14 H12 T-slot spacing: 63 mm Centering bore: 50 mm Thread: 8 × M12 Tilting axis A Tilting angle towards the working spindle: +120° Tilting angle away from the working spindle: −120° Torque of tilting axis: 3,400 Nm Holding torque of tilting axis: 3,400 Nm Holding torque of tilting axis with hydraulic clamping: 6,200 Nm Rapid traverse of tilting axis: 40 rpm Feed rate of tilting axis: 20 rpm Input and display resolution: 0.001° Bidirectional accuracy of tilting axis A: A ≤ 9 arc seconds Permissible moment of inertia of tilting axis: max. 59 kg·m² Rotary axis C Rotary range of C-axis: 360° Torque of rotary axis: 2,000 Nm Holding torque of rotary axis: 2,000 Nm Feed rate of rotary axis: 7,200°/min Bidirectional accuracy of rotary axis C: A ≤ 7 arc seconds Table load: max. 600 kg Permissible moment of inertia of rotary axis: max. 48 kg·m² Workpiece diameter: max. 840 mm Machinable diameter: 650 mm Workpiece height: 500 mm MACHINE DETAILS Control system: Siemens 840D sl Operate Cooling system: Liquid cooling Lubrication: Oil-air lubrication Operating hours Power-on hours (according to counter): 1,166 h Spindle hours (according to counter): 362 h Further technical data can be found in the attached offers.

Condition: used, functionality: fully functional, Complete stationary sawmill including: Log infeed, transverse conveyor Log lifting device with ejector Transverse conveyor and feeder to the clamping carriage Clamping carriage, hydraulically operated, with auxiliary carriage, electrically operated; the entire sawing line can be controlled from the clamping carriage. FULL SAW FRAME BRAUN CHGB 71/75 with automatic overhang adjustment and stepless feed Saw blade tensioner Jansen, hydraulically operated Electrically adjustable wedge with electric extraction rollers Roller conveyor with pusher Fjdjz I Tabepfx Akyjpn Spiral roller conveyor for boards to the edging line Transverse conveyor in front of the edger Undertable cutoff saw DOUBLE EDGER PAUL KMEZ with trim removal system Roller conveyor after the edger with discharge to the left/right Saw blade sharpening machine for saw frames, Vollmer Saw blade setting machine for saw frames, Riva Circular saw sharpening machine, Vollmer Sawdust and trim disposal, shaking chute, vibrating screen with 1 fraction 2 conveyor belts for feeding into the silo

Year of construction: 2018, operating hours: 5,750 h, condition: used, functionality: fully functional, overall weight: 3,800 kg, total length: 7,650 mm, total width: 2,180 mm, total height: 3,000 mm, milling spindle speed (max.): 20,000 rpm, number of spindles: 1, type of cooling: water, machine/vehicle number: 1220099569, operating hours of spindle: 5,720 h, number of slots in tool magazine: 12, number of axes: 5, Elumatec SBZ 122/75, a 5-axis machining center for aluminum profiles. Due to a change in production to a tube laser system, we are selling our fully functional Elumatec SBZ 122/75. Service was performed by Elumatec in March 2026 (see attached maintenance report), and we have not used the machine since then. Interested parties are welcome to view and test the machine at any time. Special equipment (see also the attached invoice): - Length measurement on both sides - 2 additional, automatically positionable material clamps - 1 additional material stop on the right side, allowing for the processing of oversized lengths - Control cabinet cooling Technical data (see also the attached brochure): - X-axis travel: 4176mm - Y-axis travel: 1040mm - Z-axis travel: 540mm - A-axis swivel angle: -120° to +120° freely programmable - C-axis swivel angle: -220° to +220° freely programmable - Max. machining length without end-face machining: 3851mm - Max. machining length with end-face machining: 3525mm - Tool changer with 12 positions - Saw blade diameter: 180mm - 6 material clamps - Tool holder: HSKF63 - Spindle power: 7kW / 20000 rpm, water-cooled - 2-layer machining - Minimum quantity lubrication - Central lubrication This very fast and agile machine with a 5-axis head leaves nothing to be desired. The machine is available immediately. Fsdpfszz Tbhox Akyopn Space requirements can be found in the layout in the appendix. You can also find the transport instructions in the appendix; please contact us if you have any questions. Dismantling, loading and transport should preferably be organized by the buyer due to the subsequent reassembly. Various auxiliary tools can be made available upon request, if available. All information and dimensions have been provided to the best of our knowledge and belief; however, no guarantee can be given for completeness and accuracy! The sale is made as is, without any guarantee, return policy or similar. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, color channels: CMYK, number of print heads: 2, We are offering this used Mimaki TxF300-75 DTF roll-to-roll printing machine and the accompanying Adkins dryer with powdering unit. Fsdjzn Iqqopfx Akyspn Year of manufacture: 2024 Condition: Ready for use / currently still in operation. Otherwise, please see the photos. We also have other machines of the same design available. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2018, functionality: fully functional, power: 5 kW (6.80 HP), cutting height (max.): 75 mm, MULTI BLADE CROSS CUT SAW MCEL 75 Fpodpfx Akoz D Utzeyjn • Max. cutting height: 75 mm • Number of saws: 5 pcs • Power: 5x4 kW

Condition: excellent (used), machine/vehicle number: CUTSTAR74/274, type of input current: three-phase, input voltage: 400 V, For sale: Heidelberg CutStar XL 75, an industrial roll-to-sheet feeding and cutting system designed for integration with Heidelberg Speedmaster XL 75 sheetfed offset printing presses. The CutStar system enables printing materials to be fed directly from rolls, automatically cut into individual sheets, and transferred to the printing press. This solution allows printing companies to use roll-fed materials in sheetfed offset production, helping to optimize material costs and improve production efficiency. The system is offered together with a Corona Plasma Plus surface treatment unit. Technical Specifications * Manufacturer: Heidelberg / Bielomatik Leuze GmbH + Co. KG * Model: CutStar XL 75 * Machine type: Roll-to-sheet feeder and cutter * Year of manufacture: 2011 * Serial number: CUTSTAR74/274 * Power supply: 3 × 400 V * Frequency: 50 Hz * Rated current: 52 A * Connected load: 40 kVA * Supply fuse protection: 100 A * Control voltage: AC 230 V / DC 24 V Included Equipment * Heidelberg CutStar XL 75 roll-to-sheet feeding and cutting system * Corona Plasma Plus surface treatment unit * Electrical control cabinets * Associated components and accessories shown in the photographs Operating History and Condition The system was previously installed on a Heidelberg Speedmaster XL 75 printing press with over 200 million impressions. The equipment was fully operational and in very good technical condition before dismantling. The entire system was professionally dismantled by Heidelberg Polska technicians, ensuring proper disassembly and preparation for transportation. Fpodpfxez Ny A Hj Akyen The equipment is currently dismantled, secured, and stored in our warehouse on transport pallets. Due to its dismantled condition, a live operational demonstration is not currently possible. Additional photographs and technical information can be provided upon request.

Condition: excellent (used), Year of construction: 2014, 5-axis machining center Brand: DMG MORI Type: DMF DMU 75 Monoblock Year: 2014 CNC: Heidenhain iTNC530 Equipped with: Integrated rotary table, dia. 600mm / 600kg 35 kW spindle – 18,000 rpm 60-position tool changer TS 649 probe 3D quickset Center coolant system, 40 bar 600l coolant tank with paper filtration Infrared tool probe Coolant gun Chip conveyor Specifications: Table surface 800 x 650 mm (dia 600 inclinable) X-axis travel 750 mm Y-axis travel 650 mm Z-axis travel 560 mm B-axis -/+120° C-axis 360,000° Spindle speed 2 - 18,000 rpm Spindle power 35 KW Fpjdpfx Asz E R D Sskyjn Spindle taper SK 40 Rapid traverse XYZ 40 m/min Machine dimensions approx. 3200 x 2600 x H 2900 mm Weight approx. 11,600 kg

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 26010607, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 5,900 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 5,900 mm, workpiece width (max.): 1,600 mm, workpiece height (max.): 280 mm, number of axes: 5, number of slots in tool magazine: 20, controller manufacturer: SIEMENS SINUMERIK, total height: 3,200 mm, total length: 11,000 mm, total width: 4,700 mm, overall weight: 10,000 kg, table length: 5,900 mm, table width: 1,600 mm, Equipment: CE marking, MAKA PE 75 5-axis machining center – in good working order and ready for use. The machine was used for the production of wooden stairs. Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Number of milling spindles: 1 Vertical drilling spindles: 16 Horizontal spindles in the X-axis: 2 Horizontal spindles in the Y-axis: 2 Vacuum pump: 130 m³/h Number of vacuum pumps: 1 Number of traverses/consoles: 8 Pneumatic pressure: 6 bar Fpodpfezwcfzex Akysn A-axis: ±90° / 180° C-axis: 540° Rapid traverse X/Y: 60 m/min Rapid traverse Z: 24 m/min Electrospindle cooling: liquid Table: traversing/console type Application: wood processing / stair production.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: DN1729, Technical data: IHF - Ingersoll Rand - Quick Lift QLA 75-S-GM manipulator handling device, lifting aid Payload at full extension 75 kg, at the gripper 25 kg Overall height approx. 3.1 m Reach: approx. 2 + 2 m Lifting height: approx. 0.2 - 1.4 m Total weight approx. 400 kg Swivel range 270° + 90° (via articulated arm), connection to 400V 16A With a pneumatic magnetic gripper (16 magnets), you can pick up or position steel workpieces, thereby automating your process. The crane is disassembled and immediately available. The item is located in 75053 Gondelsheim. Other cranes are available, with load capacities from 80 to 5000 kg; please inquire. See pictures. Shipping by freight forwarder or collection only by prior arrangement. Fjdpfx Akozv Hw Esyjpn

Condition: used, Year of construction: 2014, Spiral mixer Kemper SP 75 Year of manufacture: 2014 Temperature sensor PT 100 (measurement in the guide rod) Capacity in dough: 120 kg Capacity in flour: 75 kg Timer with two clocks Two speed levels Bowl rotates clockwise/counterclockwise Protective cover with safety switch Mobile with locking mechanism Fedpfxjz A Scqe Akyspn

Year of construction: 1984, condition: refurbished (used), functionality: fully functional, drive type: V-snaren, Motor: 55 kW - 1500 RPM Tread die: 85 mm Die diameter: 362 mm Equipped with a cut-off knife on the door Weight: 1440 kg 1 year warranty Fpedpfx Ajz Arh Nekyon

Condition: used, Year of construction: 1974, pressure 075 t throat 380 mm stroke 16- 140 mm number of strokes - idle run 105 /min shut height (stroke down, adjustm. up) 260 mm Fedpfez N Hu Njx Akyopn ram adjustment 80 mm table surface area 750 x 640 mm ram surface 500 x 200 mm hole in the table 150 mm table height over floor 800 - 920 mm total power requirement 7 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m Machine has an adjustable table and air operated clutch and brake.

Year of construction: 1991, condition: excellent (used), functionality: fully functional, Möhringen high-performance band saw from a small sawmill. Frame width 750 x 710 mm. Stroke 500 mm. Speed 300 rpm. Hydraulic feed, continuously adjustable from 0 to 12 m/min. Hydraulic raising of the saw wheels with adjustable wheel pressure. Automatic adjustment of the saw frame overhang. Automatic electric central lubrication system. Full and idle pulleys. Reinforced steel flywheel. Electromagnetic remote control. Saw mounting with sliding guides, saw gauges. Hydraulic saw tensioner. Electrical control cabinet and accessories. Fedpfsz N Dd Ujx Akyspn Professionally disassembled and loaded onto a truck for transport.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2019062, Used (2019), in very good condition termo printing calender with felt. Width: 2000 mm. Reliable Italian quality. Ideal for sublimation and textile finishing. Clean, properly maintained and fully functional. CHARACTERISTICS OF PRINTING CYLINDER: Diameter : 200 mm (7,87“). Width : 2.000 mm (78,74“). Working width: / 1.800 mm (70,87”) TECHNICAL DATA: Installed power: 14 kw/h Average electric consumption: 9 kw/h Compressed air pressure: 3-8 bar Mechanic speed: 0.1 - 1.7 m/min Overall dimensions: width 3.110 mm (122,44“). length 1.250 mm (49,21“) height 1.650 mm (64,96”). Net weight: 950 kg Machine produced according to CE rules TENSION CONTROLS: Tension control for printing material: Entry: brake with manual adjustment and manual textile tensioner Exit: tangential winding on felt Tension control for printing paper: Entry: disk brake with pneumatic adjustment. Exit: winding with pneumatic device Fpjdpfozuy Rvex Akysn Tension control for protection paper: Entry: disk brake with pneumatic adjustment. Exit: tangential winding on felt Single motor NOMEX felt with manual tension adjustment system and automatic felt-centring device Incorporated system of felt protection in case of black out and/or compressed air lack

Condition: excellent (used), Year of construction: 1999, Arburg 221KS 250-75 / Universal machine Year of manufacture: 1999 injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2350 bar Metering volume: 31 ccm Clamping unit: Clamping force: 25 t tie bar distance: 221 mm size of clamping platens: 342x250 mm Fpsdpfx Akoz Iqqqeyjn ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core pull control injection unit hardened - bimetal Clamp for fixing the injection unit vertical Dimensions: Weight: 1150 kg Length/width/height: 2.63x1.34x1.93 m Drive: Pump/motor: 5.5 kW Heating power: 4,6 kW Total power: 10,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Kemper SPL 75 spiral mixer Fpedpfx Aoz Ntimokyon - used - 120 kg dough capacity - 2 speeds - with timer - stainless steel bowl and mixing arm - bowl guard - collection from warehouse/shipping option available - price on request

Condition: excellent (used), Year of construction: 1999, Arburg 221KS 250-75 / Universal machine Year of manufacture: 1999 Fpedpfx Akoz Iqpteyen injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2350 bar Metering volume: 31 ccm Clamping unit: Clamping force: 25 t tie bar distance: 221 mm size of clamping platens: 342x250 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core pull control injection unit hardened - bimetal Clamp for fixing the injection unit vertical Dimensions: Weight: 1150 kg Length/width/height: 2.63x1.34x1.93 m Drive: Pump/motor: 5.5 kW Heating power: 4,6 kW Total power: 10,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2021, Chamber dryer for recycled plastics. Manufacturer: Creative Machine Building Center Year of manufacture: 2021 Power supply: 400 V Power: 75 kW Capacity: 700 kg/h (soft plastics) Fedeztzzgopfx Akyspn 1000 kg/h (hard plastics) External dimensions of the machine: - length: 4,000 mm - width: 1,500 mm - height: 2,600 mm Includes a belt conveyor. Technical condition: used

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 308, Technical characteristics: ⚙️ Core Specifications Attribute Value Thread Diameter Range: 3 mm to 75 mm Rolling Pressure: 0.5 to 20 tons Max Thread Length (Plunge): 160 mm Max Thread Length (Through): 2000 mm Speed Range: 24 to 114 rpm (8-step gearbox) Tool Diameter: 145 mm to 200 mm Roll Spindle Diameter: 54 mm Fpjdpfxjxx Nuxs Akyjn Shaft Distance: 130 mm to 200 mm Machine Dimensions (L×W×H): 1880 (INCLUDING HYDRAULIC UNIT) × 991 × 1270 mm Weight: ~1.6 tons 🧰 Features & Capabilities Variable Rolling Pressure: Adjustable to suit different materials and thread profiles. Heavy-Duty Construction: Built for long-term industrial use with high repeatability. Manual or Semi-Automatic Operation: Depending on configuration and accessories. Machine status: WORKING

Condition: good (used), Year of construction: 2010, operating hours: 7,637 h, overall weight: 1,970 kg, ALMiG Direct 75 screw compressor The DIRECT 37-315 series is designed for extremely economical operation in every kW class thanks to its unique design concept, making it suitable for a wide range of applications. These compressors with fixed speeds are particularly well suited as base load compressors. Fodpfx Aksttucgjyspn Separation system – highest compressed air quality through proven multi-stage separation Air Control P – the intelligence of the compressor; it thinks, monitors and documents. Thanks to the possible internet connection, there are practically no limits to communication. Drive system – highly efficient, reliable direct drive Compressors – powerful, excellent efficiency Cooling unit – large-surface coolers for the lowest compressed air outlet temperatures and optimal coolant temperatures System fan – powerful, efficient, high-performance Drive motor – robust, designed with power reserves ALMiG Direct 75 Year of manufacture: 2010 Final pressure: 11 bar Motor power: 75 kW Volume flow according to ISO 1217 (Appendix C-1996): 11.58 m³/min Length: 2300 mm Width: 1400 mm Height: 1860 mm Weight: 1970 kg Operating hours: 7637 h Load hours: 6317 h Idle time: 167714 h Total volume delivered: 4,506,000 m³ You can find more ALMiG compressors – new and used – in our shop! International shipping costs available on request!

Condition: good (used), A. COSTA PUMA/2/75 – 2 x 55 kW TWO-ARBOR MULTI-SAW For sale: a professional Italian two-arbor multi-saw from A. COSTA, model PUMA/2/75. This machine is designed for longitudinal resawing of wooden elements. It features a heavy-duty, industrial design with two saw arbors and a crawler feed system. MACHINE SPECIFICATIONS: • Manufacturer: A. COSTA S.p.A. – Marano Vicentino, Italy • Model: PUMA/2/75 • Machine number: 90EC3 • Year of manufacture: 1990 • Type: two-arbor multi-saw • Power supply: 380 V • Frequency: 50 Hz • Rated power (from nameplate): 114 kW • Rated current (from nameplate): 217 A • Main motors: 2 x 55 kW • Feed motor: 4 kW • Maximum cutting height: 160 mm • Two saw arbors • Crawler feed system • Material pressure rollers • Adjustment of working unit settings • Kickback protection • Central lubrication system • Electric control panel • Cutting width: 350 mm The machine's design allows for efficient resawing of wood using two saw units – a lower and an upper arbor. NAMEPLATE: A. COSTA S.p.A. Marano Vicentino – Italy MODEL: PUMA/2/75 Fpedpjz D Nqbsfx Akyon NO.: 90EC3 YEAR: 1990 POWER: 114 kW CURRENT: 217 A VOLTAGE: 380 V FREQUENCY: 50 Hz USED MACHINE – CONDITION AS SHOWN IN THE PHOTOS. The machine is preserved in its original, heavy-duty industrial construction. It is sold in the condition and configuration shown in the photos. Due to the machine's size and weight, on-site pickup and transport by the buyer are preferred. The machine can be inspected before purchase.

Condition: used, Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, 75 L Intensive Rubber Mixer with a 220 kW AC Motor, Gearbox, Drive and Control Panel, Pneumatic Hopper Door, and Hydraulic Discharge Door. Ready for operation and in good condition. Fjdpfx Akjzufu Hsyepn

Condition: excellent (used), Year of construction: 2016, operating hours: 20 h, functionality: fully functional, high-pressure hose length: 20 mm, pressure: 90 bar, fuel: diesel, overall weight: 600 kg, water tank capacity: 1,000 l, temperature: 90 °C, MGC.pl, a company operating since 1995 with over 6,000 completed transactions, offers for sale a professional Heatweed HighSeries 75/30 machine from 2016, designed for weed removal using hot water and surface cleaning. The offered set includes two working nozzles and additional tanks. The model is designed for simultaneous operation by two operators, making it ideal for servicing larger areas, in service companies, municipal plants, and companies involved in green space maintenance. TWO APPLICATIONS IN ONE MACHINE Heatweed uses hot water for thermal weed control, without the use of herbicides. This solution is particularly useful for maintaining sidewalks, squares, parks, cemeteries, and areas around buildings. The device can also operate as a pressure washer for cleaning facades, benches, trash cans, monuments, tombstones, and other infrastructure elements. Pressure and temperature regulation allows the operation to be adapted to the task at hand. TECHNICAL DATA OF THE MODEL Manufacturer: Heatweed. Model: High 75/30 / HighSeries 75/30. Year of the offered unit: 2016. Engine: Kubota, diesel. Possibility of simultaneous operation by two operators. Declared weeding performance: 3750–7500 m² per day, depending on working conditions. Fodsz H T A Tspfx Akyjpn Water flow during weed control: 30 l/min. Working pressure during weeding: 0.1 bar. Water temperature during weeding: 99°C at weed level. Automatic temperature control with display. Accuracy of temperature regulation according to the manufacturer: ±0.4°C. Pressure in cleaning mode: stepless regulation up to 90 bar. Water temperature in cleaning mode: adjustable up to 85°C. Number of burners: 2. Fuel tank capacity (engine): 40 l. Fuel tank capacity (burners): 80 l. Standard water tank capacity: 1000 l. Standard working hoses: 2 × 15 m. Two integrated automatic hose reels. Dimensions of the machine itself, length × width × height: 1351 × 1001 × 1314 mm. Machine weight according to the data sheet: 585 kg. Dosing pump for descaling agent. Operation without the need to connect an external generator. Design allowing loading and unloading with a forklift. EQUIPMENT OF THE OFFERED SET Two working nozzles. Additional tanks. Detailed number and capacity of tanks and the composition of accessories to be confirmed during inspection. APPLICATION Weed removal from sidewalks, squares, and pedestrian paths. Maintenance of parks, gardens, and green areas. Maintenance of areas around schools, kindergartens, and playgrounds. Work in cemeteries and municipal areas. Service for housing estates, industrial facilities, and company premises. Washing facades and elements of small architecture. Cleaning monuments, tombstones, benches, and trash cans. Professional equipment for a company that wants to expand its offer with hot water weeding and cleaning services. The possibility of operating two operators and the combination of two functions increase the range of applications for the device. The stated price is net and applies to export and for companies. A significant discount is possible for individual customers. We invite you to contact us directly by phone so that you can get your best price.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Inline Cutter/Emulsifier Brand: Inotec GmbH Model: I175CDI-75 Machine number: 103-00605 Year of manufacture: 2007 Voltage: 230/400 V, 50 Hz, 152 A Power: 91 kW, 106 kVA Dimensions: 2000 mm x 900 mm x 850 mm With distribution cabinet Fpedpewxza Nsfx Akyen Dimensions: 1200 mm x 600 mm x 2100 mm

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION Fpjdpswivdkefx Akyen