Used Pocket Hole for sale (4,185)

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 9,000 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 16 x stake pockets in the outer frame, drive-on ramps (approx. 3.000 x 750 mm), drive-on ramps laterally adjustable, spring lifter for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized, , surcharge for:, warning signs with lighting and rotating beacon = price: 800 ¤, widening to 3 m = price: 1.100 ¤, hydraulic 1-piece ramps 500 ¤, Also with 8.10 m loading area length + widening in stock , , , , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Knsdpsz A Uyfsfx Abzeb

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 9,000 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 16 x stake pockets in the outer frame, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, , incl. axle load indicators, , vehicle hot-dip galvanized, also with 8.10 m loading area length + widening in stock, , Surcharge for, aluminum ramps = price: 1.600 ¤, warning signs with lighting = price: 800 ¤ , , , , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Kodpfez A Uylsx Abzsnb

Condition: used, empty load weight: 8,950 kg, maximum load weight: 31,050 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 07/2024, suspension: air, tire size: 235/75R17,5, color: other, gearing type: other, front tire size: 235/75R17,5, rear tire size: 235/75R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, ABS, air suspension with raising and lowering function, axle load scales, total loading area length approx. 9,100 mm, low-bed approx. 6,900 mm long, loading height approx. 890 mm, 24 x lashing points, each with a capacity of 10 tons, 12 x pocket slots in the outer frame, loading ramps (approx. 3,100 x 760 mm), climbing bar on the outside of the ramp and rear slope, loading ramps adjustable laterally, 68 mm thick wooden floor, storage box with lid for lashing chains or tie-down straps, incl. axle load indicators, vehicle hot-dip galvanized, -- subject to printing errors, errors and changes, sample images --, more data available at: !, More Details: ! Kjdpfx Aez A Uziebzjnb

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 39,000 kg, rotor length: 3,200 mm, power: 320 kW (435.08 HP), rotational speed (max.): 58 rpm, input voltage: 400 V, Completely Overhauled Machine: Kjdpfxewkilwe Abzenb Delivery time: November 20, 2026 Slow-speed, robust single-shaft shredder suitable for the pre-shredding of various materials without large contaminants. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2 x 160 kW (ABB) Screen perforation: Screen holes 148 mm Control cabinet: complete with (frequency converter - ABB) Cooling system: included Working opening: 3190 x 1750 mm Filling volume: approx. 8 m3 Rotor length: 3190 mm Rotor diameter: 745 mm Rotor speed: 50Hz: 58 rpm Number of rotor knives: 36 pieces Knife dimensions, cutting knives: 145 x 145 mm Counter knives at the bottom: 9 pieces Stripper comb at the top: 9 pieces Feed system, hydraulic: 11 kW Total weight: approx. 39 t Dimensions L x W x H mm: 6250 x 3260 x 3090 mm Hopper: included Delivery time: November 20, 2026

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,050 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, total height: 2,778 mm, total width: 2,977 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 6,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 30, product length (max.): 3,635 mm, number of axes: 3, This 3-axis SMEC MCV 5500 was manufactured in 2022. It features an X-axis travel of 1050 mm, Y-axis travel of 550 mm, and Z-axis travel of 520 mm. The machine includes a robust table size of 1200 x 540 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the SMEC MCV 5500 vertical machining centre we have for sale. Contact us for further details. - CNC Control: Siemens SINUMERIK 828D incl. OPERATE and ShopMill- T-Slot Size: 4 x 18H8 mm- T-Slot Distance: 125 mm- Distance Spindle Center to Column: 580 mm- Distance Table to Spindle Nose: 130-650 mm- Ball Screw X-Axis: Ø 40 x 12 mm- Ball Screw Y-Axis: Ø 40 x 12 mm- Ball Screw Z-Axis: Ø 40 x 10 mm- Feed Motor X-Axis: 3 kW- Feed Motor Y-Axis: 3 kW- Feed Motor Z-Axis: 3 kW- Rapid Traverse X/Y/Z: 36/36/30 m/min- Feed Rate X/Y/Z: 1-15,000 mm/min- Spindle Motor: 22 kW (30 min) / 18.5 kW (Cont.)- Max. Spindle Torque: 141 Nm- Spindle Taper: BBT 40- Tool Storage Capacity: 30 positions- Max. Tool Weight: 8 kg- Max. Tool Length: 300 mm- Max. Tool Diameter: Ø 80 mm (Ø 125 mm with adjacent empty pockets)- Tool Change Time: 1.6 s- Chip-to-Chip Time: 5 s- Coolant System Tank Capacity: 365 L- Coolant Flow Rate: 29.1 L/min- Internal Coolant Pressure (IKZ): 20 bar- Hydraulic System Capacity: 3.9 L- Hydraulic System Max. Pressure: 9 bar- Max. Power Requirement: 32 kVA- Voltage: 400 V- Compressed Air Connection: 6 bar- Machine Dimensions (W x D x H): 3635 mm (incl. chip conveyor) x 2977 mm x 2778 mm- Additional Equipment:* Hinge belt side chip conveyor with rollers* Oil skimmer with endless belt* Coolant unit with coolant gun and bed flushing* Spindle oil cooling system* Air gun* DXF Reader* Electronic handwheel* 3-color status signal light* Work area lighting Knjdpez A Ubpjfx Abzob Technical Specification Through-spindle Coolant Yes

Condition: used, maximum load weight: 32,440 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2015, next inspection (TÜV): 08/2027, loading space length: 13,630 mm, loading space width: 2,500 mm, total width: 2,550 mm, total height: 3,331 mm, Year of construction: 2015, Equipment: ABS, 3-axle Krone SD platform semi-trailer with stake pockets VIN: 670643 Chassis / Components: * Air suspension // Raising and lowering * Steerable axle * Jost support legs * 3 x BPW axles with disc brakes * Tires: 385/65 R22.5 * Fifth wheel height approx. 1140 mm * Pallet box * 2 x widening panels Superstructure: * Platform with stake pockets * Steel coil transport * Multilock * 5 x tensioning winches per side with steel cable * 6 x heavy-duty lashing eyes per side * Holder for plug-in stakes, left and right Kedpfx Aboz Dc D Uozjnb * Stake pockets arranged variably on the platform * 6 x stake pockets per side extendable (for widening) * Certificate: EN 12642 Code XL Weights: * Gross vehicle weight: 39,000 kg * Tare weight: 6,560 kg * Payload: 32,440 kg Other: * German semi-trailer * 1 previous owner * MOT / Inspection / ---- New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and transport of your purchased vehicles within Germany is also possible. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & spelling errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As we place great importance on customer satisfaction, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in buying or selling vehicles. See for yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day passes / export license plates We will gladly assist you in obtaining export/short-term license plates.

Condition: used, Year of construction: 1996, input voltage: 400 V, empty load weight: 220 kg, WELL-MAINTAINED, USED KÖLLE L2 LONG-HOLE DRILLING MACHINE WITH A 1.4 KW MOTOR AVAILABLE FOR SALE! Knjdsz Dbicopfx Abzsb

Condition: good (used), Year of construction: 2013, functionality: fully functional, DECKEL MAHO PFRONTEN GMBH DMG MORI DMU 60 eVo Universal Machining Center Travel X/Y/Z: 600 / 500 / 500 mm Standard Spindle Speed Range: 20 – 14,000 rpm Kedpsyzamasfx Abzenb Motor Spindle: 18.9 / 14 kW (40/100% duty cycle) Standard Tool Holder: SK40 to DIN 69871 Control: Heidenhain iTNC 530 HSCI Operator Interface: SmarT.NC Control Panel: DMG ERGOline Control Display: 19" NC Swivel Rotary Table Clamping Surface: 600 x 500 mm B-Axis Swivel Range: -5° to +110° C-Axis: 360° Table Loading Capacity: 400 kg Direct Measuring Systems Table Cooling Spindle Version: 20 – 18,000 rpm Tool Holder: HSK-A63 to DIN 69893 Tool Magazine: 60 positions Magazine Type: Chain magazine with double gripper Heat Exchanger for Spindle and Table Active Cooler for Control Cabinet Direct Position Measurement System Full Enclosure Cabin 3D Control Touch Probe: Heidenhain TS 649 DMG 3D quickSET Toolkit Preparation 3D quickSET Software Option 5-axis Machine Configurations Signal Light: Four-color Preparation for Handling System: PH 150-8 Chip Conveyor: Scraper belt chip conveyor with cleaned slotted screen Internal Coolant Supply (IKZ) Paper Band Filter: 40 bar / 231 l/min / 600 l tank Rotating Viewing Window Pressure Air Seal Linear Measuring Systems Bed Flushing Flushing Gun for Chip Removal Blow Air Through Spindle Center Selection via M-function Serviced Air with Low Oil Content Power Failure Safety Package Overvoltage Limiter Undervoltage Monitoring with Fast Braking Actuation Operating Mode 4 Production Process Monitoring Documentation: German Screen Text: German / English DMG / MORI SEIKI Messenger DMG Netservice Client Automation: DMG PH 150-8 Pallet Loading and Unloading System with Handling Unit and Pallet Magazine Rotary Storage: 8 positions Servo Axes: 2 Z-Axis: Pneumatic Gripper Arm / Fork IPC with Touch Panel DMG Automation Job Manager Graphical Operator Guidance Signal Light: 4-color Integration Kit: For DMU 50 / 70, DMU 40 / 60 / 80 eVo linear Chuck: Erowa UPC P Pallets: Erowa UPC 320 x 320 mm Number of Pallets: 8 Hole Grid: 50 mm Z Support: Steel Interface: Profibus Standard Automation Electrical Interface Version 4.0 Safety Door and Emergency Stop Signals Robot Side Machine Gross Weight: 11,000 kg Machine Net Weight: 9,500 kg Machine Dimensions: 400 x 280 x 315 cm IKZ Package Gross Weight: 800 kg IKZ Package Net Weight: 650 kg IKZ Dimensions: 200 x 175 x 190 cm Chip Conveyor Package Gross Weight: 640 kg Chip Conveyor Package Net Weight: 590 kg Chip Conveyor Dimensions: 355 x 140 x 170 cm Transport Traverse Package Gross Weight: 200 kg Transport Traverse Package Net Weight: 200 kg Transport Traverse Dimensions: 210 x 80 x 50 cm

Condition: good (used), functionality: fully functional, machine/vehicle number: WKESD000001092168, empty load weight: 7,080 kg, maximum load weight: 31,920 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2023, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,490 mm, loading space volume: 84 m³, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, color: grey, Year of construction: 2022, Equipment: ABS, our vehicle number #30358 3x Krone axles Tire size 385/65 R 22.5 all NEW!!! Perm. total weight 39,000 kg Payload 31,920 kg Unladen weight 7,080 kg Body dimensions (internal): L: 13,620 mm W: 2,480 mm H: 2,490 mm V: 84 m³ Rear portal loading height: 2,400 mm Color: Traffic Grey RAL 7043 Lifting axle Disc brakes Sliding curtain Sliding roof Load securing certificate EN 12642 XL Hydraulic rear extension, 500 mm per side Multilock outer frame 2 lashing rings on rear cross member 5 pairs of heavy-duty lashing rings under outer frame 10 rows of stanchion pockets 81 x 81 mm 2x oversize warning boards each Forklift accessible, 7,000 kg Kedpfxeyt Ilgo Abzsnb Rear wall 750 mm, foldable Drop chains for rear wall Rear roll tarp Side tarpaulins with 600 mm skirting Stanchion depot on the left Mounting for beacon at rear 2x toolboxes 6 plug-in stanchions Jost landing legs Raise/lower function ABS EBS E-wheel holder 2x LED rear combination lamps Side underrun protection Financing available on request!!!

Condition: like new (used), functionality: fully functional, Year of construction: 2026, container length: 20 ft, overall weight: 30,400 kg, maximum load weight: 28,000 kg, empty load weight: 2,300 kg, loading space volume: 33 m³, loading space width: 2,350 mm, loading space length: 5,900 mm, loading space height: 2,390 mm, operating hours: 10 h, machine/vehicle number: 000, 20ft storage container – available immediately! ✔ As good as new ✔ Windproof & waterproof ✔ Rubber seals, wooden floor, ventilation ✔ With CSC sticker – also suitable for transport Dimensions & details: • Exterior: 6,058 x 2,438 x 2,591 mm Knsdpfx Abog S Adzozjb • Interior: 5,898 x 2,350 x 2,390 mm • Door opening: 2,343 mm • Volume: 33 m³ • Weight: 2.25 t / Payload: 30 t 💡 Very sturdy construction with steel walls (2 mm) 💡 Floor with forklift pockets 💡 4x door bolts, 4x ventilation slots 📬 Enquire now – we will prepare a suitable offer! 👀 Other container sizes available.

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Knjdpfsz Dmn Rjx Abzeb Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: used, mileage: 305,000 km, power: 335 kW (455.47 HP), first registration: 04/2019, fuel type: diesel, number of seats: 59, gearing type: automatic, emission class: euro6, color: green, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, Setra S 517 HD Excellent condition, original mileage * MB engine, 5 kW, Euro 6 * PowerShift automatic transmission * Retarder * ESP, ABS, ASR * ABA emergency braking assistant * Lane keeping assistant * Attention Assist * 57+1+1 seats, Luxline, custom-made * Reclining seats with leather headrests * Tables, pockets, footrests, USB port for each seat * 2 refrigerators * Coffee machine in the WC * Tour guide cabinet * WC * Service sets with nozzle ventilation & reading lights * DVD video system with 2 electric flat-screen monitors * Navigation system on the screens * Radio, CD, MP3, USB, microphone * Roof edge night lighting * LED lighting on staircases 1 and 2 Kedpoz Ddlaefx Abzsnb * ART adaptive cruise control, speed limiter * Lowering/raising system, kneeling function * Rear view camera (with nozzle) * Camera on door 2 * Xenon headlights * Fog lights * Heated windshield * Electrically operated windshield blinds * Electrically adjustable and heated rearview mirrors * On-board computer * Multifunction steering wheel * USB charging port * Bluetooth phone * Driver's seat with air suspension, seat heating, ventilation, 3-way adjustable, swiveling, armrests * Parking brake, hill holder * 2nd battery set for starting * Ski carrier eyelets * ALCOA aluminum rims Customers who are viewing this ad on Truckscout, please request additional photos by email, as this portal is limited to 15 images! All information without guarantee Further information: also available on WhatsApp) Information in Polish: WhatsApp) Your French contact: Georges Spengelin

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can Knedpfx Asz Df Txebzsb be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: used, mileage: 406,800 km, power: 309 kW (420.12 HP), first registration: 06/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, loading space length: 8,140 mm, loading space width: 2,480 mm, loading space height: 580 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Flatbed with crosswise stake pocket rails recessed into the floor for plug-in stakes, tarpaulin covering the entire body. ---- * MAN BrakeMatic (electronic braking system) * Intarder * Control module for external data exchange (KSM) + fleet management * 12-speed automatic transmission * MAN EasyStart (hill-hold function) * Emergency Brake Assist 2 (EBA2) * Lane Guard System IV (LGS IV) * Rear axle differential lock * Traction control system (ASR) * Rear axle air suspension * Liftable trailing axle * Anti-lock braking system (ABS) * 2-line trailer brake (EC) * Emergency stop signal (ESS) * Electronic stability program (ESP) * Disc brakes * Battery master switch * Hill-start assist * Roof hatch in cab * Cab with rear window * Exterior sun visor, transparent * Exterior mirrors electrically adjustable and heated * Electric window lifters for driver and passenger doors * Central locking with radio remote control * Immobiliser (transponder) * MAN TipMatic ZF-AS Tronic 12 AS transmission * Automatic climate control * Auxiliary warm air heater * Heated driver’s seat * 780-litre fuel tank * High beam and fog lights with cornering light function * Rotating beacon left and right * Euro 6 engine version Knsdpfx Abeygpc Tezjb * Regulated rocker arm brake (EVBec) * Cruise control * Engine version with AdBlue * Aluminium side panels * Extended front wall * Drawbar trailer coupling * Air-suspended driver’s seat * Air-suspended passenger seat * Storage box ---- Sale only to commercial customers! No guarantee for the information provided! Subject to prior sale! Only our general terms and conditions apply! We are happy to offer you a leasing or financing proposal.

Condition: used, Year of construction: 2000, operating hours: 15,800 h, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Kedpfx Abjxqmrfszenb Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.

Condition: new, Kessler DMQ .4.AFB motor, mounting hole spacing: 248 x 248 mm, drive shaft diameter: 55 mm, unused with storage marks, 100% functional, scope of delivery as per photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Ksdpfji D Iyzox Abzonb

Condition: ready for operation (used), Rexroth MAC093B-0-JS-4-C/130-A-1/WI517LV 3-Phase Permanent Magnet Motor, mounting hole spacing: 116 x 116 mm, drive shaft diameter: 24 mm, used, overhauled by the manufacturer in 2007, has not been used since, very good condition, in original packaging, 100% functional. Kjdji D Nf Rjpfx Abzenb

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 30 mm, clearance between the columns: 480 mm, displacement volume: 247 cm³, injection pressure: 272 bar, injection weight: 107 g, mold height (min.): 150 mm, ejector force: 40 N, ejector stroke: 100 mm, plate width: 705 mm, plate height: 705 mm, total length: 5,037 mm, total width: 1,590 mm, total height: 1,850 mm, overall weight: 5,400 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 62 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: FF120 IU320 D=30 Knsdpfx Aozzn Hljbzob Fully electric IMM. Ejector, nozzle system, core pulls servo-hydraulically controlled. Clamping force 120T Tie bar spacing 480x480 Tool installation height 150 to 580 Robot interfaces Euromap 18 and Euromap 67 Warranty can be optionally extended to 24 or 36 months. Suitable 12 kg linear robot available upon request. Optional equipment: CE Maximum tool height increased to 580 mm Bimetallic plasticizing up to GF 30% Interface for conveyor belt Electric quick-change system for the cylinder with Harting interface 2 additional hydraulic core pulls with limit switches 2 air blow devices, permanently mounted on the stationary platen Dosing signal interface with HAN-3A connector Additional power supply: 220 V, 10 A, Schuko socket 20-mA interface for mold temperature controller One water distributor 4 × 2 on the rear of each platen with 3/8" connections 2 water distributor batteries with 4 lines each Socket package: 3 × 220 V / 16 A Schuko sockets 2 × 400 V / 16 A CEE sockets 1 × 400 V / 32 A CEE socket 3 freely programmable input/output signals Centering rings on both platens according to Euromap 18 / 67 Standard equipment: Clamping unit · Clamping unit with automatic central lubrication · Clamping movements via proportional valve control · Hydraulically operated ejector plate · Tool protection · Variable adjustment of the clamping force possible · Ejector protection · Mechanical robot interface Euromap 18 · Footboard protection under the clamping unit from D1 1100 and larger · Precision leveling shims between machine frame and customer floor · Platens with threaded holes and T-slots, see technical data · Automatic central lubrication (with grease) · Ejector plate Injection unit · Hydraulic dual-cylinder injection · Thermally insulated plasticizing unit · 10-stage adjustment of the injection speed · (Control parameters: speed; pressure; position) · 10-stage adjustment of the holding force (Control parameters: speed; pressure; position) · 5-stage adjustment of the plasticizing speed · (Control parameters: speed; pressure; position) · Plasticization supported on linear guides · Hydraulic nozzle system · Cold start protection · Screw retraction function · Automatic shut-off · Measuring system for screw position Electrical system · Plasticizing heater via PID control · Manual, semi-automatic and fully automatic operation possible · Maintenance interface · Automatic alarm system with horn · Unlimited technical parameter memory · Automatic tool height adjustment · Emergency stop function · Online cycle analysis · 12" TFT touch operating panel · Visualized graphic program · PDP interface · Injection monitoring · Tool closing monitoring · SPC interface · IP54 standard · Screw speed measurement · 16-level password security · Euromap 12 · Automatic overheating protection Hydraulic system · Quiet servomotor hydraulic system · Energy-saving servomotor hydraulic system · High-performance servopump system · Back pressure control via proportional valves · Oil preheating · Injection and tool closing monitoring · Automatic pressure and flow calibration · Oil temperature and oil level alarm

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : Ksdpfx Asz Dv Aqebzjnb - H : approx. 450 cm - D : approx. 110 cm - L : approx. 14 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x uprights approx. 450 cm x 110 cm, pre-assembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x locking pins. - 40 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2.990,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Kodpjz Dvutofx Abzonb Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: repair required (used), Year of construction: 1978, functionality: not functional, machine/vehicle number: 212 393, ram adjustment: 100 mm, pressing force: 160 t, stroke adjustment: 80 mm, overall weight: 18,000 kg, punching force: 160 t, We are offering this Haulick-Roos RVD160-1250 stamping press, manufactured in 1978, which requires repair. Pressing force during continuous operation: approx. 1600 kN Max. distance between table and ram: 350 mm Distance between the uprights along the length: 1250 mm Opening on the uprights, width x height: 640 x 460 mm Through hole in the table: 1000 x 250 mm Ram surface, width x depth: 1200 x 900 mm Dowel bore in the ram, diameter x depth: 50 mm Adjustable ram stroke: 20 – 100 mm Ram adjustment: 100 mm Stroke adjustable in infinitely variable steps: 50 – 300 mm Drive power: 22 kW Weight: approx. 18,000 kg incl. uncoiler and feed machine Uncoiler with feed machine: Manufacturer: Schleicher Type: 6-70 RM 76 Max. coil weight: Strip thickness: 0.5 – 4 mm Max. coil width: 650 mm Max. coil diameter: 1400 mm Power: 5.5 kW Year of manufacture: 1978 Feed and control: Including pre-piercing software ASTA All data are approximate. Technical specifications/equipment are non-binding and without guarantee. The machine is sold without any warranty or guarantee. Sale exclusively ex works, for dismantling or at additional cost. Kedjzdf Utspfx Abzonb If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, mileage: 146,800 km, power: 70 kW (95.17 HP), first registration: 05/2022, fuel type: diesel, overall weight: 2,174 kg, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 8, Equipment: ABS, air conditioning, airbag, cruise control, onboard computer, power assisted steering, sliding door, soot filter, traction control, E07 Hill Start Assist, H06 Air Conditioning, EY5 Mercedes-Benz Emergency Call System, SD1 i-Size Child Seat Attachment, EY6 Breakdown Management, B26 Parking Brake, JK5 Instrument Cluster with Color Display, V23 Premium Interior Trim, T68 Child Safety Locks for Passenger Compartment Doors and Windows, Z1M M1 Registration, FC5 Heat-Insulating Windshield, IA0 Wheel Formula 4x2, V29 Plastic Boot / Cargo Area Floor, MA2 Speed Limit Assist, XO9 Mercedes-Benz MobiloVan with DSB and GgD, W51 Rear Doors Double-Wing 180 Degrees with Window, E1D Digital Radio (DAB), Y10 First Aid Kit, MJ8 ECO Start-Stop Function, ES1 12 V Socket in Passenger Compartment, SF6 Height-Adjustable Driver’s Seat with Lumbar Support, RD9 Tyres without Brand Specification, H00 Warm Air Duct to Passenger Compartment, MS1 Cruise Control, HI2 Climate Zone 2 (Moderate), Z3L Tourer BASE, RM0 All-Season Tyres, C6L Multifunction Steering Wheel, FE8 Front Power Windows, FE7 Electric Windows in Sliding Doors, HZ0 Electric Auxiliary Heater, E2V MB Audio System with DAB, L12 Halogen Headlights, XZ0 Model Generation 0, W70 Tinted Rear Windows – Privacy Glass, X0Q Weight Variant 2,174 kg, V4V Plastic Floor in Front Passenger Area, W78 Rear Hatch Window with Wiper and Washer System, T17 Right-Side Sliding Door with Window, I44 16" Steel Wheels, F68 Electrically Adjustable and Heated Exterior Mirrors, H22 Heated Rear Window, JW8 ATTENTION ASSIST, FG1 Armrest with Storage Compartment, T20 Left-Side Cargo Sliding Door with Window, FG5 Pocket on Back of Driver and Passenger Seat, Y44 Warning Triangle, KA1 Particulate Filter, F71 Auto-Dimming Interior Mirror, P2F Active Safety Package, XC8 VIN Visible from Outside, SZ6 Folding Table on Back of Driver and Passenger Seat, JH3 Communication. You can reach us by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM!! Further information:!! Leasing/financing and trade-in possible!! - Subject to error and prior sale!! - All information is provided without guarantee ... more details on our homepage Ksdpfx Abszvfucozjnb

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand Knedpfx Aoz Dvbtsbzjb - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2631.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Our recommendation: Tell us what you need... We will be happy to help you realize your projects, from planning to ordering to installation. Delivery is possible on request at a reasonable price.

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Knjdpfx Ajxdfa Ujbzjb Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Knjdpfez Dvdbsx Abzeb Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.