Used Pocket Hole for sale (4,366)

Condition: excellent (used), Compart machines - German, for cutting registers in books, holes. 6 pieces ready to work Lrjdpfjwm Hn Uox Ad Njg

Condition: new, overall weight: 4,500 kg, Year of construction: 2025, LONG REACH excavator arm 8m, 10m, 12m, 14m, 16m, 18m, 20m. 22m + BOAT POSSIBILITY OF PRICING FOR ANY MACHINE. POSSIBILITY OF PRICING FOR LENGTHS FROM 8M UP TO 22M BELOW OFFER FOR LONG REACH BOOM 16M FOR JCB JS 220 + Lredpoua U Acofx Ad Neg BUCKET 0.6 M3 TECHNICAL SPECIFICATIONS Material: S355 steel Length: 16 m Maximum reach: "forward": 15.5 m Maximum digging depth: 11.2 m Weight: ca. 4500 kg Dipperstick capacity: 0.6 m3 All pins are hardened (to increase hardness above 50 HRC) 1 bucket cylinder, 6 pipes, 4 hoses, 8 pins, 5 grease lines, 1 set of couplings Fabra: KAISAI brand (colour can be selected) Hose: GATES brand All pins are equipped with grease nipples All "pipes" are phosphated

Year of construction: 1991, condition: good (used), Description: - X x Y x Z axis travel: 200 x 300 [mm]. - table size: 250 x 350 [mm] - max. weight of the workpiece: 100 [kg] - max. diameter of electrode: ~ 0,3 ~ 3,0 [mm] - floor space: 860 x 830 x 1990 [mm Lsdpfogktifsx Ad Norg - weight: 500 [kg]

Condition: used, Year of construction: 1979, from school operationused, good conditionmake Ayentype DB 1000 K 23year of construction 1979machine no. 7SA740GS-testednumber of spindles 23 piecesnumber of drilling beams 1spindle distance / grid 32 mmdrilling from aboveswiveling pneumatichole line drilling devicestorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Lrjdevxr Rajpfx Ad Njg

Condition: used, Heidelberg Stahlfolder Folding units for first pocket is a machine manufactured by Heidelberg Stahlfolder, with a format of 520 mm. Currently stored in Germany, it includes one first station No. 3 gate fold, four folding pockets for Heidelberg Stahlfolder TI 52 first unit, one first station No. 2 gate fold, one first station No. 4 gate fold, and one first station No. 1 gate fold. The delivery terms are FCA. Format: 520 mm Equipment: 4 Folding units for Heidelberg Stahlfolder TI 52 1st Unit 1x 1.ST Nr. 1 gate fold 1x 1.ST Nr. 2 gate fold 1x 1.ST Nr. 3 gate fold Lredpfjvfxtuex Ad Njg 1x 1.ST Nr. 4 gate fold

Condition: good (used), Year of construction: 1995, Technical data: - Pressure capacity 250 KN - max. sheet thickness 6 mm - max. punching diameter 90 mm - stroke 42 mm - throat 500 mm - maximum stroke rate 200 H/min - connected load 4 kW Lrjdehikdaspfx Ad Nog - space requirement LxWxH 1000 x H 1750 x D 1400 mm - weight approx. 1600 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, drilling depth: 750 mm, spindle speed (max.): 6,720 rpm, drill diameter: 20 mm, spindle stroke: 1,450 mm, distance between centers: 120 mm, TECHNICAL DETAILS Number of spindles: 4 Spindle spacing: 120 mm Spindle drive: 4 × 4 kW Spindle speed: 672 – 6,720 rpm Spindle stroke: 1,450 mm Drill diameter: 4 – 20 mm Drill depth: 750 mm EQUIPMENT - Chip conveyor - Air cooler - Filter unit Lodpfx Adswm Ebyo Nsrg - Revolving belt with workpiece carriers

Condition: used, Year of construction: 1975, used hole line drilling machine Model Scheer DB 20 table size 1400 x 630 mm 1 drill beam a 21-spindle, 32 mm pitch height adjustment 40-100 mm Spindle distance max 640 mm, Working length 700 mm per cycle by moving the workpieces max. 2656 mm throat 550 mm Motor 1.8 KW 1 stop rail with immersion stops Weight approx. 240 kg Lsdjri R Hajpfx Ad Norg

Condition: good (used), I am selling a SIBO brand drilling and sanding machine for flat brushes. Lredpfxevx Tpdj Ad Neg

Condition: used, Type: DB 5 Condition: function-tested, very good, used - drilling gear with 21 spindles, pitch 32 mm - unit swivels up to 90 degrees - motor 2.2 kW - drilling depth max. 80 mm - complete stop system Lsdpfxsu Inu Re Ad Njrg

Condition: used, Year of construction: 1986, comb. with handle olive drilling unitused, great condition, little usedMake MakaType STV-71-BYear of construction 1986Machine no. 864653pneumatic workpiece clamping laterally 1 piecepneumatic workpiece clamping from above 2 piecesRequired space approx. 1350 mm x 1200 x 1200 mmWeight approx. 1000 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seenwithout guarantee and guarantee Lredevwfz Nspfx Ad Nog

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 640 mm, total height: 2,200 mm, total length: 1,780 mm, total width: 1,580 mm, table width: 450 mm, table length: 940 mm, Clamping table with M8 clamping holes Monitor 19" Electrode changer 18-fold Guide changer 3-fold Plastic protection at the front of the table NSD PC control unit Z-axis programming with switch-off Automatic zeroing of the Z-axis during drilling Automatic approach cycles Crash monitoring during positioning Latest generator technology with multi-pulse function Filter with filter pump Automatic intermediate guide Z-axis for 700 mm electrodes W-axis force compensation Ionizing unit Filter & high pressure pump Work light Remote control unit Ionization control Various tools in toolbox Lredjtpa Adspfx Ad Njg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, rotational speed (max.): 5,600 rpm, TECHNICAL DETAILS Drilling Data Drilling depth: 1,500 mm Axis Data X-axis travel: 3,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm X-axis feed rate: 15 m/min Y-axis feed rate: 15 m/min Lredow Izr Aopfx Ad Neg Z-axis feed rate: 15 m/min Feed force: 30,000 N Rapid traverse speed: 15 m/min Spindle Data Speed: min. 300 rpm Speed: max. 5,600 rpm Table Data Clamping surface: 2,000 mm x 1,250 mm Number of T-slots: 7 Table load capacity: 12,000 kg Tool holder: SK50 MACHINE DETAILS Control: TNC430 Dimensions & Weight Dimensions (L x W x H): 8,400 x 8,300 x 4,500 mm Total weight: 30,000 kg EQUIPMENT Stepless speed adjustment Drill bit grinding machine Note: Dismantling and loading can be offered for €8,000.

Year of construction: 2010, condition: ready for operation (used), A GUK slitter rewinder and buckle folding machine is available. Infeed paper width: 210mm, folding capacity: 320 sheets/min, min. forming range: 60mm/105mm, max. forming range: 210mm/340mm, cutting tolerance at 300 sheets/min: +/-1mm, max. roll diameter: 600mm, max. roll length: 4000mm. Documentation available. On-site inspection is possible. Lodpfjw Azt Rjx Ad Nerg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total length: 1,350 mm, total width: 1,260 mm, workpiece weight (max.): 300 kg, table width: 450 mm, overall weight: 2,300 kg, type of input current: three-phase, table length: 888 mm, drilling depth: 500 mm, Technical equipment -4-way guide changer -32-way electrode changer -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage Ledpovppw Sjfx Ad Nerg via TCP/IP interface -High operating comfort

Condition: excellent (used), - Dimensions: 2050x2800x2400 mm Lsdpfx Aowxmrdjd Norg - Electric oven - 6 openings - 3 decks - With integrated loader/elevator - Baking surface: 6 m² - Power: 43 kW - Voltage: 400 V Refurbished equipment: the equipment is prepared upon order, with agreed pick-up and return times. Please request pricing after revision.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 6207 20.57, workpiece weight (max.): 3,000 kg, spindle speed (max.): 4,000 rpm, table length: 1,675 mm, table width: 700 mm, quill travel distance: 1,000 mm, TECHNICAL DETAILS Travel Paths and Drilling Motion Quill travel z: 1,000 mm Vertical drilling unit: 800 mm Traveling column in drilling direction w: 1,100 mm Table and Axes Table transverse travel x: 1,000 mm Table size: 1,675 x 700 mm Table load capacity: 3,000 kg Spindle and Machining Tool holder: SK40 Spindle speed: 100 to 4,000 rpm Drilling capacity in steel: 32 mm Lredow Elrvspfx Ad Nog Thread cutting: M24 MACHINE DETAILS Power connection: 7.5 kW Dimensions & Weight Weight: 4.8 t Footprint: 3,500 x 6,000 x 2,400 mm Transport dimensions without enclosure: 2,400 x 6,000 x 2,400 mm

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Ledpfx Adsw E H E Re Nsrg Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: ready for operation (used), Year of construction: 2008, An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. Lredpfxju Ilbue Ad Neg

Condition: used, Year of construction: 1980, second hand Make Scheer Type DB 5 Year of construction 1980 Machine no. 508054 Number of spindles 21 pieces Number of drilling beams 1 Lrsdpfx Ajvwfuvjd Nsg drilling from below pivoted manually Working width 800 mm Drilling depth 80 mm Tensioner 2 pieces Pitch 32mm Space requirement approx. LxWxH mm 1200x800x1300 Weight approx. 300 kg Total connection value 2.2 kW Storage location 97447 Gerolzhofen Handover in the current condition as seen - free loaded -

Condition: used, usedmanufactured by Gannertype Superdrillnumber of spindles 19 piecespindle distance / grid 32 mmhydraulic feeder brakeguide fences 2 piece length ca. 3,0 m / 1,5 mworking width 640 mmdrilling depth 95 mm / 110 mmdrill chuck D 10 mmpendulum fence 6 piececlamp 3 piecedrilling unitframe dowel unitrequired space ca. 1400 mm x 900 mm x 1200 mmtotal connected power 1,5 kWlocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen,without revisionwithout guarantee and warranty Lrjdpfxsvwf R Ro Ad Nsg

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, warranty duration: 12 months, Workpiece Clamping Diameter : ø 3 – 140 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 100 mm Workpiece Weight : max. 170 kg Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Semi-Automatic, CNC Control Panel : Beckhoff CNC Movements : Z-Axis Indurstry 4.0 Compatibility : Available Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Sectors : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Lsdpfx Aowhi Sred Nerg Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use CNC Control Panel: Benefit from very simple operation and grinding program recording with the Beckhoff control panel and Z-axis servo movement. Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex SA-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex SA-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Z-Axis movement is provided by servo motor in CNC form. The part is loaded-unloaded and clamped manually. Settings are made from CNC control panel and grinding is started by pressing the start button. No other manual setting or control is made during grinding. Contact us for more details.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 106 155 - 11, (Please tell us your offer price) Sale only within Europe, incl. Turkey Ledpfxew Agqhe Ad Norg Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 1989, with many drills used, top condition Make Hoffmann Type DB 23 Year of manufacture 1989 Machine no. 169 Number of spindles 23 Number of drilling beams 1 Spindle spacing / grid 32 mm Drilling from below stroke 60 mm Stop rulers with central adjustment Working width 704 mm (1080 - portal passage) Drilling depth 70 mm horizontal Drill holder M 10 / cone 30° Lrsdpfxsvyurce Ad Nog Space required approx. 1300 mm x 1000 mm x 1300 mm Weight approx. 500 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Condition: used, Year of construction: 1977, used manufactured by Ayen type DB 1000 K2 built in 1977 Mach.-No. 751212 number of spindles 23 piece number of drilling beams 1 drilling from top tiltable pneumatic Ledpevwgagsfx Ad Norg comb lowering pneumatic drill chuck D 10 mm clamp 3 piece grid 32 mm required space ca. l x w x h mm 1200 x 800 x 1600 weight ca. 370 kg total connected power 2,2  kW located in  97447 Gerolzhofen sale in current condition as seen - free on truck -