Used Pneumatic Punching Machine for sale (67,450)

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Cpedpfsxizanox Aa Eew

Condition: good (used), Year of construction: 1992, Hydr.hole punching machine make häwa year 1992 working pressure.400bar with electric height adjustable supporting table Csdpfx Ajgbk R Uja Eopw Machine ready for use .

Condition: excellent (used), Year of construction: 2015, operating hours: 1,900 h, functionality: fully functional, machine/vehicle number: MR510726330, punching force: 30 t, total width: 4,840 mm, total length: 3,630 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, working range: 2,500 mm, overall weight: 7,500 kg, table width: 4,840 mm, table length: 2,800 mm, compressed air connection: 8 bar, stroke length: 2,500 mm, feed rate X-axis: 68 m/min, feed rate Y-axis: 68 m/min, feed rate Z-axis: 68 m/min, Equipment: safety light barrier, Euromac MTX Plus hybrid 1250 - Equipped with the latest control system and touch operation Codpfx Aaoyhwv Ie Eopw - Year of manufacture: 2015 - Low hours, in very good condition - 3 multitools with 8 stations each - Many dies included - Comes with Lantek CAD/CAM software

Condition: excellent (used), Year of construction: 2001, Kaiser punching machine Type: KSTU 4000-25-6P Pressing force: 4,000 kN Table surface: 2,500 x 1,250 mm Pedal surface: 2,500 x 1,100 mm Installation height: 700 mm Pedal stroke: 40-250 mm Pedal adjustment: 200 mm Stroke rate: 20-100 1/min Machine overhaul in 2018 Space required: 4.8 x 3.2 x 5.5 m (LxWxH) Cpjdpfxeyhh I Re Aa Esw Weight: 78,000 kg ARKU strip system Strip width 120 - 800 mm Strip thickness up to 6.0 mm ARKU decoiler Load capacity 8,000 kg

Condition: used, Year of construction: 2017, total length: 1,500 mm, total width: 900 mm, total height: 1,700 mm, Empty weight: 1.400 kg Price: On request Steel round: 40mm Steel flat: 200x20mm / 300x15mm Notching + Punching + cutting - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 155976 - Drive system: Conventional - Punching force [ton]: 60 - Round bar cutting capacity [mm]: 40 - Motor power: 4.0kW - Transport dimensions: 1500mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Cpjdpfowraazex Aa Eow VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), Year of construction: 2026, pressing force: 50 t, Custom-order machine High-speed punching press B500-950, completely overhauled. Table length: 950 mm, optionally also 1150 mm or 1250 mm. Adjustable stroke: 16 to 51 mm. As an alternative to the Bruderer BBV 202/120 roller feed, a servo feed can be installed. Contact us for detailed quotations. Cpodsw U A Dyjpfx Aa Eew

Condition: refurbished (used), Year of construction: 2026, pressing force: 25 t, Order machine High-speed punching press B250-740, completely overhauled Table length 740 mm, optionally also 850 mm, Adjustable stroke 13 to 38 mm, Cpedpfx Ajw U A Ewsa Eow As an alternative to the Bruderer BBV 190/85 roller feeder, a servo feeder can also be installed. Contact us for detailed offers.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, total width: 710 mm, total length: 1,280 mm, total height: 1,175 mm, overall weight: 190 kg, working width: 330 mm, input voltage: 240 V, input frequency: 50 Hz, infeed height: 250 mm, infeed width: 330 mm, product width (max.): 300 mm, product width (min.): 138 mm, space requirement height: 1,175 mm, space requirement length: 1,280 mm, space requirement width: 710 mm, stack height: 250 mm, James Burn JBI DocuPunch Plus Automatic punching machine for calendar sheet punching. With the DocuPunch, you can quickly and easily punch small or large batches of calendar sheets or book pages. By using interchangeable tools, holes can be either round or square, with or without a thumb-cut. Extremely easy operation, just like a copier! Description: - Punching system for calendar sheet punching (tool not included) - Compact design, on castors, space-saving - Adjustable speed - Operation via touch screen - Fast job change in approx. 5 minutes - Automatic sheet feeding from high-pile feeder - Quick tool change in approx. 2 minutes - Foldable punching dies - Simple and intuitive format adjustment - Waste bin for punching waste - Sheet output tray Technical Data: Max. sheet size: 330 mm (binding edge) x 300 mm Min. sheet size: 138 mm (binding edge) x 138 mm Material weight: 80 - 250 g/m² Feed stack height: 250 mm Output stack height: 250 mm Speed: 50, 60, or 70 cycles per minute, up to 45,000 sheets (80 g/m²) per hour Punching depth: adjustable, 0.4 - 1.0 mm Electrical supply: 220 - 240V, 50Hz Dimensions: 1,280 x 710 x 1,175 mm Weight: 190 kg Tools included: 1x James Burn JBI DocuPunch Wire-O Tool 3:1 Square hole 4 mm 1x James Burn JBI DocuPunch Wire-O Tool 2:1 Round hole 6 mm Year of manufacture: 2023 Cedjygxqgopfx Aa Espw Runs flawlessly, very good overall condition Counter reading approx. 700,000 Prices are net prices. Invoice with VAT will be issued.

Condition: good (used), Year of construction: 1972, functionality: fully functional, pressing force: 25 t, space requirement height: 2,800 mm, space requirement length: 1,600 mm, space requirement width: 2,200 mm, Four-column punching press Manufacturer: Hermann Raster KG Type: HR SL4S Working area Distance from ram center or distance between the columns under the guide: 160 mm Smallest / largest distance from clamping table to ram at maximum stroke: 260 / 300 mm Smallest / largest distance from clamping table to ram guide: 110 / 150 mm Clamping table Clamping area: 600 x 320 mm Clamping ram Smallest / largest stroke: 0 / 40 mm Ejector stroke (max. 20 mm) Stroke rate: 200-1000 per minute Straightening range: 70 mm Clamping area: 400 x 250 mm Clamping pin: Hole diameter: 40 mm; Depth 70 mm Cpedjwcxccspfx Aa Esw Safety device Electro-pneumatic clutch and spring-loaded brake Power Normal pressure 25,000 kp Cutting capacity 625 mm², K=40 kg/mm² Floor area required without soundproofing 1 m x 1 m x 2.45 m Weight without soundproofing 3,600 kg Floor area required with soundproofing 1.60 m x 2.20 m x 2.80 m Drive type Voltage 380-660 V Current type: Three-phase current Total power requirement 6 kW Drive: AEG, AM 132 MX4, power 7.5 kW, 2860 rpm Gearbox: PIV, FK NA HB 22 Control cabinet: AEG, 190300 Central lubrication: Woerner, PA 15.M1 Flat/V-belt 3, 17 x 2220, rubber material Drive: Variable speed drive Pull width: 65 mm Pull diameter: 224 mm Special features Gripper feed Z2 Useful width: 180 mm Soundproof cabinet sta Schalltechnische Anlagen GmbH The machine is connected to the power supply and can be tested.

Condition: used, Year of construction: 2004, functionality: fully functional, Bograma BSM 750/220/15 Servo punching line, year of manufacture 2004 Csdpfx Aaeygr I Se Eepw Bograma BSM 750/220/15 Servo, year of manufacture 2004 Bograma sheet feeder TA 15, year of manufacture 2004 Bograma shingled delivery SAB 750, year of manufacture 2004

Condition: used, Number of strokes per minute: 120 pcs Band width: 50-250 mm Cedpfxoygri Ae Aa Eopw

Condition: good (used), Year of construction: 2021, operating hours: 14,000 h, functionality: fully functional, Professional finishing in the classic digital printing format: This is why we have developed the world's first flatbed die-cutter for the B3+ sheet format KAMA ProCut 58. The versatile professional die-cutting/embossing machine (580 x 400 mm) is extremely versatile. Punching, creasing, scoring, perforating and kiss-cutting labels, blind embossing and Braille as well as hot punching of plastic. Paper from 80 g/m² Cardboard max. 800 g/m² Cpodpfx Ajvfpwwea Esw Plastic 80 - 800 g/m² (up to 1 mm) Sheet format max 580 x 400 mm Sheet size min 210 x 148 mm Speed* 6,000 sheets/h Punching force 120 t (1.2 MN) Punching format max 570 x 380 mm Gripper edge 10 mm Dimensions (length x width) 2.6 x 1.75 m

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC punching machine with only approx. 11,600 operating hours, immediately available Manufacturer: TRUMPF Model: TruPunch 3000 - 1600(S11) Year of manufacture: 11/2013 Operating hours, approx.: only 11,600 h Sheet format: Large format TECHNICAL DATA: Working area: 3,000 x 1,500 mm, with repositioning Max. workpiece weight: 160 kg Punching and hold-down force: 180 kN and 20 kN Max. stroke rate: Punching: 800 1/min, Marking: 2,500 1/min Dimensions (L x W x H): 6,500 x 6,203 x 2,252 mm SPECIAL EQUIPMENT: - MultiTool function - MultiShear function - Marking / Fast embossing function - Deburring and roller technology - Adaptive stroke calibration - Punch slug breakage monitoring - Lowerable die - Spray degreasing for dies with fill level monitoring - Additional clamp - Sheet collision detection - Stop pin, outer side, left position outside STANDARD EQUIPMENT: Machine: - Working area 3,000 x 1,500 mm (with repositioning) - Rigid C-frame for easy access - Coordinate guidance for high-precision machining Cjdpjxn Tywofx Aa Eopw - Linear magazine with 17 tool stations and 3 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning device with programmable hold-down - Ball tables - Parts chute - Programmable support table - Good parts container - Scrap container - Automatic shut-off mechanism - Transport and installation device - Stop pin (right side, inside) - Foot switch for closing the clamps Punching head: - Servo-electric punching head - Rotatable single-tool adapter - Programmable hold-down - Tool length compensation - Spray degreasing for punch - Punch slug extraction - Forming - Manually adjustable pressing force - Stroke counter for punch - Monitoring of fill level for thread-cutting and tool lubrication Control: - Control system based on Bosch MTX CMP 70 - Operating panel with 17" touchscreen - NC program management - Integrated technology data - Teleservice via Internet - Integrated e-shop - Production planning - Programming - Advanced workshop programming - Data transmission - USB interface Safety: CE marking (ex works) Dual-beam light barriers

Condition: like new (used), Year of construction: 2026, operating hours: 8 h, functionality: fully functional, machine/vehicle number: SG202640, total length: 1,500 mm, power: 4 kW (5.44 HP), overall weight: 650 kg, total width: 800 mm, total height: 1,150 mm, input voltage: 380 V, warranty duration: 12 months, Pipe Shrinking, Profile Forming Machine SG40NC Codpsyak Iksfx Aa Eepw Machine Model: SG40NC Product Description: Microcomputer-controlled and hydraulically driven. Equipped with a mobile foot switch featuring three functions: automatic operation, emergency stop, and continuous emergency stop, ensuring high safety. Capable of multiple processing methods including tube Forming, tube expanding, tube end blunting, and bulging. Processed shapes include concave-convex joints, elongated, flat, square, flared, angled, V-shaped, open elbow, etc. Molds can be changed according to the user’s processed products. Mold replacement is simple and convenient, facilitating flexible production. The machine has a compact and sturdy structure, uses hydraulic power, operates stably with a high yield rate, minimal vibration, and low noise. It can perform tube end reduction, expansion, bulging, upsetting rib forming, and other shape forming processes. Suitable for processing various shapes at the connecting parts of pipe fittings (for insertion), automotive oil pipes, air ducts, water pipes, and air conditioning pipes. Maximum Tube Forming Capacity mm Ø40×2mm Maximum Tube Forming Length mm 100mm Motor Power kW 4 Weight kg 600

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, punching force: 28 t, sheet thickness steel (max.): 6 mm, input current: 35 A, Machine in perfect working order! Cpjdpfx Aaerfww No Ejw

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons Cpodpex U Eiasfx Aa Eew

Condition: used, Year of construction: 1990, serial number 28043 weight 3 t pressure 30 t volt 380 V Codpfx Aaopxri Hs Ejpw frequency 50 Hz

Condition: good (used), Pneumatic filling machine with filling bend Function The machines work according to the piston principle of suction - discharge. One or two dosing pistons are driven by pneumatic cylinders. The desired filling quantity is set using a handwheel on a scale on the machine. ■ Pneumatic volumetric piston dispenser Filling capacity 300-800 pieces/h ■ Dosing accuracy +-0.5% ■ Immediately ready for operation, easy handling Codpsrt Un Ejfx Aa Eepw ■ Easy to clean ■ Filling range 8 - 80 ml / interchangeable cylinder Self-priming ■ Easy to transport for different locations Areas of application: Production and laboratory Chemical industry - cosmetics industry Food and pharmaceutical industry Paint and varnish industry Type: H 80-P-MV Filling range 8 - 80 ml Filling times: 300 - 800 h Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 1992, machine/vehicle number: 27123, Offer 25466 Cedpfx Aaeyfchge Eopw Technical Data: - Cutting length up to 125 mm - Cutting thickness - at 400N/mm² tensile strength: 4 mm - at 700N/mm² tensile strength: 2.5 mm - Aluminium, plastic: 6 mm - Cutting angle: 90° - Depth stops - Foot pedal - Space requirements approx. W 700 x H 1400 x D 800 mm - Weight approx. 150 kg

Condition: refurbished (used), functionality: fully functional, Mechanical roller feed BBV190/85 for attachment to BSTA50 Left-hand attachment Csdpfx Aer Hmprja Eepw Drive via main shaft / cardan shaft of the press - cardan shaft / mounting plate is not included in the scope of delivery Mechanical feed length adjustment via spindle PTO shaft protection system tube Including encoder attachment

Condition: refurbished (used), Year of construction: 1994, functionality: fully functional, Refurbished BRUDERER Stamping Press BSTA 50L incl. new Press Control PCS-100 Technical Specification Press Force: 500 kN Tool Mounting Area (L-R x F-B): 950 x 650 mm Adjustable Stroke Lengths: 16, 19, 25, 32, 38, 44, 51 mm Strokes per Minute (SPM): - 16 mm stroke: 1,120 SPM - 19 mm stroke: 1,030 SPM - 25 mm stroke: 900 SPM - 32 mm stroke: 795 SPM - 38 mm stroke: 730 SPM - 44 mm stroke: 680 SPM Cpodsydu Tfjpfx Aa Eow - 51 mm stroke: 620 SPM Power Connection: 76 kVA Servo Motor Output: 47 kW Shut Height (Die): 206 - 294 mm (depending on stroke) Slide Adjustment: 64 mm Strip Feed Width: 250 mm Strip Feed Height: 60 – 140 mm Additional Features - Completely refurbished high-speed eccentric press - Highly dynamic, adjustable stroke mechanism - Equipped with the latest modular high-performance PCS-100 press control - Energy-efficient drive system for reduced CO2 emissions - Industry 4.0 ready via OPC-UA interface - Press force monitoring - Integrated tool monitoring system - Integrated servo feeder system PV100

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 150 311, total height: 6,195 mm, ram adjustment: 150 mm, installation height: 600 mm, table height: 1,000 mm, total width: 2,660 mm, total length: 4,340 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 315 t, control cabinet height: 2,200 mm, control cabinet length: 3,600 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 1,010 mm, distance between side stands: 810 mm, distance between stands: 3,020 mm, overall weight: 76,000 kg, year of last overhaul: 2025, ATTENTION: Machine will be completely mechanically and electrically overhauled before delivery in 2025. Pressing force: 3150 kN Adjustable stroke: 40 - 200 mm Ram adjustment: 150 mm Strokes per minute: 20 - 100 Tool installation height: 600 mm Table dimensions: 3000 x 1250 mm Ram dimensions: 3000 x 1100 mm Csdpfx Aajwqpghj Eopw New control system SIEMENS S7 1500

Condition: excellent (used), Year of construction: 2001, operating hours: 39,000 h, functionality: fully functional, + QuickSharp Csdpfjyc Nznex Aa Eopw + Quickset

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: AMNC-3i, _____ Description: Control : Sonstige AMNC-3i Movement X/Y/Z : 3000/1500 mm Technical data Punching machine:EMK-3612MII (58) Punching force:300 kN Positioning accuracy:± 0.1 mm Number of tool stations:58 Machine frame:Bridge frame Machine table type:Brush table Punching drive:Servo-electric dual drive Travel range (X x Y):1525 x 3050 mm Control:AMNC-3i (21.5" screen size) Features :Punch & forming function :Good parts flap :scrap conveyor system Dimensions Length:5436 mm Cpedpfx Aaex I T Dxs Ejw Width:6212 mm Height:2342 mm Weight:21500 kg

Condition: good (used), functionality: fully functional, Heidelberg Die-Cutting Platen GTS – 60 Tons Die-Cutting Pressure Industrial Classic | Extremely Robust | Comprehensive Accessory Package For sale is an original Heidelberg GTS die-cutting platen, one of the most powerful and robust platen machines from Heidelberg. Year of manufacture and operating hours are undocumented (common for this generation), but the machine is fully functional, complete, and exceptionally well equipped. Special feature: 60 Tons Die-Cutting Pressure The GTS clearly stands out from other Heidelberg platens (e.g., GT / T / smaller models): ➡ 60 tons of die-cutting pressure instead of the usual approx. 40 tons. Cpodpfx Aasyc Hnfs Ejw This makes it ideally suited for: • Heavy cardboards • Multi-layered materials • Demanding die-cutting and creasing jobs • Tools requiring high surface pressure _____ Equipment & Scope of Delivery: • 3 die-cutting frames, including: o 1 frame milled to 340 mm (ideal for special tools/larger formats) • 2 cutting plates in different thicknesses • Comprehensive accessories and spare parts package (see pictures) • Spare parts list available – a major advantage for operation & long-term value • Original Heidelberg mechanics (solid, durable, maintenance-friendly) _____ Typical Applications: • Die-cutting and creasing • Multiple-up die-cutting • Small and medium series • Packaging, cartons, technical die-cut parts • Ideal for workshops, finishers, and specialist companies Summary The Heidelberg GTS is not a museum piece, but a genuine production tool. With 60 tons of die-cutting pressure, multiple frames and cutting plates, extensive accessories, and a documented spare parts list, this machine offers an exceptional overall package for professional users.