Used Plate Rolling Machine for sale (73,550)

Condition: ready for operation (used), Year of construction: 1984, Available immediately from business closure: Powered four-roll plate bending machine Manufacturer: RAS Model: 44/10 Year of manufacture: 1984 Bending length: 1020 mm Material thickness: up to 4 mm Drive: 1.5 HP Weight: 800 kg Priced at EUR 1,750.-- plus VAT, ex location. Hedpjyykzrjfx Ab Ijk

Year of construction: 1984, condition: ready for operation (used), Immediately available from business closure: Motorized four-roll plate bending machine Manufacturer: RAS Model: 44/10 Year of manufacture: 1984 Bending length: 1020 mm Material thickness up to 4 mm Drive power: 1.5 HP Weight: 800 kg Price: EUR 1,750 plus VAT, ex location. Hodpfx Asyyktbob Iek

Condition: used, working width: 1020 mm metal sheet thickness: 1 mm upper roller-Ø: 55 mm below roller-Ø: 55 mm space needed: 1370 x 570 x 1100 mm Hedpoda I Itjfx Ab Isk

Condition: used, Year of construction: 1953, working width: 2,040 mm, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, We offer this used plate rolling machine C.A. Fastenrath 1906/8, year of manufacture 1953. Year of manufacture: 1953 Hedpfx Abeyxy Ths Iok Serial number: A533 Type: 1906/8 Maximum working width: 2040 mm Maximum material thickness: 1.5 mm For any questions or further information, please send us a message or contact us by phone.

Condition: used, functionality: fully functional, Year of construction: 2017, control type: PLC-controlled, overall weight: 465 kg, power: 1.1 kW (1.50 HP), input voltage: 400 V, input frequency: 50 Hz, We offer this used AKBEND AS90-10/3.0 MM sheet metal roller, year of manufacture 2017. Model: AS90-10/3.0 MM Year of manufacture: 2017 Serial number: AS90 - 0530 Hsdpfx Asyxy Sksb Iok Motor power: 1.1 kW Voltage: 400 V Frequency: 50 Hz Weight: 465 kg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: new, sheet width 1600 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 140 mm lower roll diameter 140 mm side roll diameter 120 mm min. bending diameter Oberwalzen-Ø x 3 total power requirement 3 kW Hsdpfxjyv N E Uo Ab Iok weight of the machine ca. 2.000 kg Overall size 3700x1300x1280 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 2100 mm plate thickness 40 mm pre-bending 30 mm Hodoyv Nt Espfx Ab Ijk upper roll diameter 390 mm lower roll diameter 360 mm side roll diameter 300 mm total power requirement 22 kW machine weight ab. 17200 kg Overall size 5060 x 2200 x 2180 mm

Condition: new, sheet width 3100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 300 mm lower roll diameter 270 mm side roll diameter 210 mm total power requirement 11 kW Overall size 5600 x 1800 x 1500 mm weight of the machine ca. 8.800 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings Hodpfx Aboyv Nh Nj Iek - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 10 mm pre-bending 8 mm upper roll diameter 270 mm lower roll diameter 250 mm side roll diameter 210 mm total power requirement 11 kW Hsdpfx Aboyv Nhcs Ijk weight of the machine ca. 7750 kg Overall size 5600x1450x1600 mm

Condition: new, sheet width 2100 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 160 mm lower roll diameter 140 mm side roll diameter 120 mm total power requirement 2,2 kW Overall size 4140x1040x1140 mm weight of the machine ca. 2.350 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration Hsdpoyv Nf Usfx Ab Iek

Condition: new, sheet width 2100 mm Hodsyv I Ubepfx Ab Isk plate thickness 13 mm pre-bending 10 mm upper roll diameter 230 mm lower roll diameter 210 mm side roll diameter 190 mm total power requirement 7,5 kW weight of the machine ca. 4.750 kg dimensions of the machine ca. 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 16 mm pre-bending 13 mm upper roll diameter 330 mm lower roll diameter 300 mm side roll diameter 240 mm total power requirement 11 kW Overall size 5600x1650x1900 mm weight of the machine ca. 10.600 kg Hodpfoyv I Smex Ab Isk Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, Year of construction: 2024, neu 2024 9740 prompt, Zwischenverkauf v Türkei 6200 € 119.66 € 1 1050 mm 3 mm Hodpfxewiqnwe Ab Iek 90 mm 6 m/min 1.1 kW 1630 mm 700 mm 1200 mm 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN

Condition: used, functionality: fully functional, Year of construction: 2008, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 1,100 mm, side roll diameter: 980 mm, roller diameter: 1,430 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 4,160 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 200 mm, overall weight: 225,000 kg, total length: 9,000 mm, total width: 5,580 mm, total height: 6,100 mm, power: 220 kW (299.12 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG3200 3 roll capacity 3100x200 mm year of make 2008 Hodpfx Ajyvgaujb Isk Capacity : Plate width mm. 3000 Rolling thickness mm. 200 Pre-bend thickness mm. 160 -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Planetary design with pre-pinch fully hydraulic Rolls surface length mm. 3100 Top roll mm. 1100 Side rolls mm. 980 Electric power on hydraulic unit Hp 220 + Hp 180 Voltage 400 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Oil cooler automatic unit heat exchanger. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension 9000 x 5580 x H 6100 mm -Weight approx. 225 Ton.

Condition: used, 3-roll plate bending machine Manufacturer: Luna Model: 8266 20/25 Machine No.: 2202 Working range: 2000 x 2.5 mm sheet thickness Swing-out top roll Hsdoyw S N Sopfx Ab Ijk Power supply: 3-phase, 16 amps

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, control type: PLC-controlled, 3-roll plate bending machine Manufacturer: FERRO S.R.L. Model: CIT - 1 Working range: 2000 x 6 mm Hydraulic swing-out bearing for workpiece change Operator control panel Hsdpfsyw S E Hjx Ab Ijk Emergency stop via pull-cord

Condition: ready for operation (used), functionality: fully functional, 2500 mm roll length diameter approx. 280 mm Hodpfeyw Sg Rex Ab Iek

Condition: used, functionality: fully functional, Year of construction: 1995, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 260 mm, roller diameter: 360 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 900 mm, sheet thickness (max.): 23 mm, sheet thickness steel (max.): 20 mm, overall weight: 10,000 kg, total length: 4,100 mm, total width: 1,750 mm, total height: 1,550 mm, power: 11 kW (14.96 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4-roll plate bending machine Imcar-Italy year 1995, model 4RH12/3 , capacity 2000 x18/23 mm TECHNICAL DATA: Capacity plate width 2000 mm Plate thickness max 23 mm Prebend 16 mm Upper roll 300 mm Lower roll 300 mm Surface useful on rolls 2050 mm Electric 380/50 motor 11 Kw on centralized hydraulic unit Weight 10 Ton Machine dimension 4100x 1750 x H 1550 mm Configuration: Hodsyu N Rtopfx Ab Iek Hardened rolls very high surface resistance Conical bending attachment Digital position readout Hydraulic rolls power driven with planetary gear unit Hydraulic side rolls on linear guideways plate prebend Open front drop-end hydraulic to unload the closed shell Safety and emergency installed -----

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 430 mm, side roll diameter: 300 mm, roller diameter: 480 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,420 mm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, overall weight: 20,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 20 kW (27.19 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, model capacity 3000x35 mm Digital readout Hydraulic 4 roll plate bending machine, used year 2017 plate thickness rolling 35 mm pre-bend 30 mm Hodpfx Ajyu Nr Dsb Iek minimum rolling diameter ID 480 mm plate max width on the rollers 3100 mm top roll size 430 mm Power on hydraulic unit 20kW Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted Digital position readout Hydraulic rotation central rolls driven parallelism lifetime with torsion bar Pre-pinch load adjustable for pre-bending Drop-end top roll front open for unloading Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics – CE declaration of quality machine dimension 5500x2000x2100 mm weight 20ton --- Additional accessories installed with the machine See layout drawing in enclosed nr.1 central support hydraulic 4 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 4 ton doble arm nr. 1 side support hydraulic right side 4 ton double arm

Condition: new, Year of construction: 2024, neu 2024 Hedpfxjwirule Ab Iek 9738 prompt, Zwischenverkauf v Türkei 20300 € 389.76 € 1 1530 mm 6 mm 6 mm 4 mm 150 mm 4 kW 3100 mm 1120 mm 1020 mm 2100 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)

Condition: excellent (used), functionality: fully functional, control type: CNC control, Thank you very much for your inquiry regarding the Faccin 4-roll CNC bending machine, which has seen very little use. The machine will be sold soon due to internal restructuring. It is in excellent condition. Electronically controlled, hydraulic four-roll bending machine Manufacturer: FACCIN, Model 4 HEL/2122 Technical specifications: Number of rolls: Four Roll geometry: Linear guides Working width: 2000 mm Top roll diameter: 225 mm Bottom roll diameter: 215 mm Side roll diameter: 165 mm Pressing force on the top roll: 100 tons Rated power requirement: 9.2 kW (12.5 HP) Rated maximum rolling speed: 4–8 m/min Machine weight: 4,450 kg Length: 3,500 mm Width: 1,200 mm Height: 1,100 mm Guaranteed performance: For a yield strength of 260 N/mm²: Rolling capacity (full working width): 11 mm Bending capacity (full working width): 8 mm from a minimum pipe diameter of 1,100 mm Rolling capacity (full working width): 8 mm Bending capacity (full working width): 6 mm from a minimum pipe diameter of 286 mm Hedpjywk Uyefx Ab Iek Standard features: Double linear guide system for roll movement Extra-wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty, double-articulated joint bearings EPS parallelism system Hardened rolls for high wear resistance All rolls ground after heat treatment Siemens S7 PLC control PGS-CLASSIC control with Siemens touch panel High-quality hydraulic and electrical components Safety pull-cord with emergency stop and CE certification Central lubrication Cone bending device The machine will be available for sale from the end of April.

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, Hydraulic cylinder Brand: Casanova Hsdsydk D Hepfx Ab Isk Bending length: 3,100 mm Maximum bending thickness: 25 mm Top roller diameter: 420 mm The side rollers are raised parallel, without inclination. New control and command panel, installed and modified in 2003. Equipped with hydraulic flag and hydraulic side table. Pit dimensions: - 200x6800 mm - 555 mm depth

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 110 mm, roller (top) diameter: 110 mm, side roll diameter: 110 mm, roller length: 1,070 mm, sheet thickness steel (max.): 4 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1070 x 4 mm – Electrically adjustable rear roll – Digital display for rear roll movement – Hardened rolls – Conical rolling – Swing-out upper roll – Brake motor – Emergency stop – Documentation – 400V Hedpfx Aoyv R T Teb Iok

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 110 mm, roller (top) diameter: 110 mm, side roll diameter: 110 mm, roller diameter: 110 mm, roller length: 1,270 mm, sheet thickness steel (max.): 4 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1270 x 4 mm – Electrically adjustable rear roll – Digital display for rear roll movement – Hardened rolls – Conical rolling – Swing-out upper roll – Brake motor Hedpjyv R Taefx Ab Iok – Emergency stop – Documentation – 400V

Condition: used, functionality: fully functional, Year of construction: 2006, roller (top) diameter: 420 mm, roller length: 3,000 mm, sheet thickness (max.): 60 mm, sheet thickness steel (max.): 60 mm, number of digital displays: 1, Equipment: centralized greasing system, cone bending device, emergency stop, hardened rollers, swiveling upper roller, We are offering this used Birlik sheet metal rolling machine, year of manufacture 2006. Hedpfx Aboyu Tm So Iok If you have any questions or require further information, please do not hesitate to send us a message or call us.