Plate rolling machine

IMCAR 4RH12/3 2000x23 mm 4roll

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Iedpehzbipefx Ahvoap Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, Year of construction: 2025, ZGR-3140/1,0 Our products are best quality and have certificate CE. Plate Bending Machine ZGR-3140\1,0 + additional equipment Isdpfocntnkox Ahvjap Technical data: - Maximum working width: 3140 mm - Sheet gauge up to: 1,0 mm (Steel) - Titan-Zinc-Plate 1,0 mm, Aluminium Plate 1,8 mm Cooper plate 1,5 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 20 mm - Protractor - Weight: 600 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty.

Condition: new, Year of construction: 2025, ZGR-2140/1,2 with additional equipment Our products are best quality and have certificate CE. Plate Bending Machine ZGR-2140\1,2 Technical data: - Maximum working width: 2140 mm - Sheet gauge up to: 1,2 mm (Steel) - Titan-Zinc-Plate 1,2 mm, Aluminium Plate 2,0 mm Cooper plate 1,7 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 20 mm - Protractor - Weight: 290 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Shipping costs: its dependent on destination point, please ask us, we check Your total shipping costs. Iedpscntllofx Ahvjap

Condition: good (used), functionality: fully functional, machine/vehicle number: 804, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, overall weight: 12,500 kg, 3-roll hydraulic plate bending machine 2500 x 16 mm Manufacturer: KUMLA Type: PV 7 H Serial no.: 804, overhauled in 1987 The machine is of a very robust design and has only been used in single-shift operation. Max. bending length: 2500 mm Ijdpfovxbm Rsx Ahvjap Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Bottom roll diameter: 305 mm Hydraulic roll adjustment Dimensions: L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a staircase platform around the machine can be purchased.

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 4ROLL, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 420 mm, roller diameter: 470 mm, roller length: 3,050 mm, working width: 3,050 mm, working height: 1,800 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 45 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness copper (max.): 45 mm, overall weight: 43,000 kg, total length: 7,700 mm, total width: 2,410 mm, total height: 2,470 mm, power: 37 kW (50.31 HP), input voltage: 380 V, type of input current: three-phase, working length: 3,050 mm, Equipment: documentation/manual, emergency stop, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Iodpfx Aowb Scmshveap Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower 470 mm -side rolls left/right 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and 3 digital readout. • Digital readouts of the rolls position bending and pre-bending repeatability. • Hydraulic tank capacity oil 350 liters – power electric 37 Kw voltage 380 /50 • Dimension 7700 x2410 x H 2470 mm - weight 43000kgs

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, Hydraulic cylinder Brand: Casanova Iaodpfx Ahjydk D Hovjp Bending length: 3,100 mm Maximum bending thickness: 25 mm Top roller diameter: 420 mm The side rollers are raised parallel, without inclination. New control and command panel, installed and modified in 2003. Equipped with hydraulic flag and hydraulic side table. Pit dimensions: - 200x6800 mm - 555 mm depth

Condition: new, Year of construction: 2024, 5000 kg load capacity welding turntable, very robust Speed infinitely variable from 0.05 to 0.7 rpm Iaedpoig T A Rsfx Ahvsp Turntable diameter 1500mm Inclination up to 135 Height horizontal 1660mm, tilted to center 1440mm length 2.4m x width 1.48 m with remote control

Condition: new, Year of construction: 2025, All roof bending machines from PROD-MASZ are valued not only by customers from Germany, but also from all over the world. Thanks to the fact that we have been manufacturing and supplying machines that meet individual requirements for years, we have established ourselves as the market leader for bending machines in Europe and worldwide. Every roofing machine we supply has a strong and durable construction, it is manufactured to the best standards. Bending beam only 15mm RED 3200 / 0.8mm Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Bending beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Weight: approx. 600 kg Roller shears + 350 Euro The front depth stops and rear frame are also included in the price. Bending from 3 sides -ᐳ cutouts laterally 60mm / 45 ° recess Iaodpfx Asb Eg Nkehvop Price: 5100.00 EUR Delivery date: every week We are looking forward to your contact! Invoices are issued either with 0% as intra-Community delivery.

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Isdjx Ii Hvopfx Ahveap Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, total length: 6,400 mm, Weight: 17.500 kg Iedpfx Aownhp Nohvsap Price: On request - Documentation available: Yes - CE certificate present: No - Serial number: 13707 - Drive system: Conventional - Control system brand: Elgo - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 6200 - Throat depth [mm]: 60 - Backgauge depth [mm]: 1000 - Transport weight [kg]: 17500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren