Used Plate Processor for sale (11,241)

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, A complete cooling water unit that was used for cooling screw compressors. Pump unit with machine frame, consisting of: - 3 x Grundfos CRNE45-2-2 A-F-G-V-HQQV centrifugal pumps (Year of manufacture: 2012) Q = 45 m³/h, H = 30.6 m, P2 = 5.5 kW - 6 x manual stainless steel shut-off butterfly valves DN 80 - 3 x basket strainers DN 80 - 3 x check valves DN 80 - 1 x pressure relief valve - 2 x Rosemount GP6 S22 C1 pressure transmitters - 6 x stainless steel gauges Cl. 1 - 1 x GRP pipe - 1 x mounting frame Dimensions: Length: 2400 mm Width: 2000 mm Height: 1400 mm Weight: 780 kg Heat exchanger unit with frame, consisting of: - 2 x bolted plate heat exchangers, Funke Apparatebau GmbH (Year of manufacture: 2001) Type: FPS 21-100-1-E Volume: 29.2 / 29.8 liters Max. operating pressure: 10 bar Max. temperature: 80°C - 8 x manual intermediate flange shut-off butterfly valves, stainless steel - 1 x KSB BOA electric valve with Auma SAR actuator and MATIC head, including Harting connector - 2 x PT 100 sensors - 6 x analog thermometers, stainless steel Cl. 1 - 2 x PE pipework with bends 110x65mm Gerodur - 1 x expansion vessel - 1 x mounting frame Dimensions: Length: 2200 mm Width: 2000 mm Height: 2000 mm Weight: 1500 kg Nwodpfx Asywuihjhved

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with support ribs, on a solid base cabinet -Length: 2000 mm -Width: 1420 mm -Plate: with supporting ribs, plate thickness 35 mm -Base cabinet: 6 cabinet doors / shelves (see photos) -Overall dimensions: 2000/1420/H920 mm -Weight: 1080 kg Nedpfx Aeyu Rzgohvewd

Condition: used, functionality: fully functional, Year of construction: 1995, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 260 mm, roller diameter: 360 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 900 mm, sheet thickness (max.): 23 mm, sheet thickness steel (max.): 20 mm, overall weight: 10,000 kg, total length: 4,100 mm, total width: 1,750 mm, total height: 1,550 mm, power: 11 kW (14.96 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4-roll plate bending machine Imcar-Italy year 1995, model 4RH12/3 , capacity 2000 x18/23 mm TECHNICAL DATA: Capacity plate width 2000 mm Plate thickness max 23 mm Prebend 16 mm Nwsdpfxoyu N Rte Ahvod Upper roll 300 mm Lower roll 300 mm Surface useful on rolls 2050 mm Electric 380/50 motor 11 Kw on centralized hydraulic unit Weight 10 Ton Machine dimension 4100x 1750 x H 1550 mm Configuration: Hardened rolls very high surface resistance Conical bending attachment Digital position readout Hydraulic rolls power driven with planetary gear unit Hydraulic side rolls on linear guideways plate prebend Open front drop-end hydraulic to unload the closed shell Safety and emergency installed -----

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 430 mm, side roll diameter: 300 mm, roller diameter: 480 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,420 mm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, overall weight: 20,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 20 kW (27.19 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, model capacity 3000x35 mm Digital readout Hydraulic 4 roll plate bending machine, used year 2017 plate thickness rolling 35 mm pre-bend 30 mm minimum rolling diameter ID 480 mm plate max width on the rollers 3100 mm top roll size 430 mm Power on hydraulic unit 20kW Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted Nodpfoyu Nr Djx Ahvowd Digital position readout Hydraulic rotation central rolls driven parallelism lifetime with torsion bar Pre-pinch load adjustable for pre-bending Drop-end top roll front open for unloading Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics – CE declaration of quality machine dimension 5500x2000x2100 mm weight 20ton --- Additional accessories installed with the machine See layout drawing in enclosed nr.1 central support hydraulic 4 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 4 ton doble arm nr. 1 side support hydraulic right side 4 ton double arm

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: Nwsdsyuzcuopfx Ahvsd - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: excellent (used), functionality: fully functional, control type: CNC control, Thank you very much for your inquiry regarding the Faccin 4-roll CNC bending machine, which has seen very little use. The machine will be sold soon due to internal restructuring. It is in excellent condition. Electronically controlled, hydraulic four-roll bending machine Manufacturer: FACCIN, Model 4 HEL/2122 Technical specifications: Number of rolls: Four Roll geometry: Linear guides Working width: 2000 mm Top roll diameter: 225 mm Bottom roll diameter: 215 mm Side roll diameter: 165 mm Pressing force on the top roll: 100 tons Rated power requirement: 9.2 kW (12.5 HP) Rated maximum rolling speed: 4–8 m/min Machine weight: 4,450 kg Length: 3,500 mm Width: 1,200 mm Height: 1,100 mm Guaranteed performance: For a yield strength of 260 N/mm²: Rolling capacity (full working width): 11 mm Bending capacity (full working width): 8 mm from a minimum pipe diameter of 1,100 mm Nedpfx Asywk Uyehvjwd Rolling capacity (full working width): 8 mm Bending capacity (full working width): 6 mm from a minimum pipe diameter of 286 mm Standard features: Double linear guide system for roll movement Extra-wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty, double-articulated joint bearings EPS parallelism system Hardened rolls for high wear resistance All rolls ground after heat treatment Siemens S7 PLC control PGS-CLASSIC control with Siemens touch panel High-quality hydraulic and electrical components Safety pull-cord with emergency stop and CE certification Central lubrication Cone bending device The machine will be available for sale from the end of April.

Condition: new, Year of construction: 2024, neu 2024 9738 prompt, Zwischenverkauf v Türkei 20300 € 389.76 € 1 1530 mm 6 mm 6 mm 4 mm 150 mm 4 kW Njdpfowiruljx Ahvewd 3100 mm 1120 mm 1020 mm 2100 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)

Year of construction: 1991, condition: used, Built in 1991 Size max 700 x 1.000 mm min 150 x 200 mm Buckle width min 60 mm Speed max 25-160 m/min Equipment • continuous stream suction feeder • counter IZVA 341 1st folding unit: • 4 buckle plates • rear-mounted slitter shaft • 2. rear-mounted slitter shaft • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shaft Nwodpfx Asc Idn Ushvod • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shaft delivery: • belt delivery

Condition: good (used), Year of construction: 2017, Refurbished: 2017 Format: max 360 x 650 mm; min 80 x 100 mm Folding capacity: max 150 m/min Nwsdpfxeqrq Hvo Ahvjd Power requirement: 2 kW (220/380V, 50Hz) Length: 2,130 mm Width: 1,230 mm Height: 1,500 mm Net weight: 370 kg (approx.) Equipment - Flat pile feeder with Tremat suction head - Counting device 1st folding unit: - 6 buckle plates - FESTA folding roller adjustment - Downstream slitter shaft - Noise protection device 2nd folding unit: - Hook-on knife folding unit - FESTA folding roller adjustment - Delivery Accessories: - Operating instructions - Electrical circuit diagrams - Spare parts catalog - Standard tool Condition - as is, cleaned available - immediately

Condition: ready for operation (used), Size with pallet feeder max 660 x 1040 mm Speed max 210 m/min Equipment • pallet feeder with Tremat suction head Nedjd Iq S Ropfx Ahvjwd 1st folding unit: • 4 buckle plates • noise prevention peripheral units and deliveries • marking device MKE 66 • upright stack delivery with pressing SBP 66

Year of construction: 1989, condition: used, Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment • flat pile feeder 1st folding unit: • 4 buckle plates Nwedpfx Ahoc Rhvtjved • Festa foldingrolleradjustment • noise prevention

Year of construction: 1997, condition: good (used), Built in 1997 Size 1.300 x 1.650 mm Speed 150 m/min Equipment feeder • pallet feeder (MABEG) 1st folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 2nd folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts Nsdpfx Asdymm Hshvowd • noise prevention 3rd folding unit • 2 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention delivery • belt delivery

Year of construction: 1999, condition: good (used), Built in 1999 Size max 820 x 1.750 mm Size with continuous feeder max 820 x 1.750 mm min 150 x 150 mm Speed Nwodpfsfbff Uex Ahvsd max 205 m/min Length with continuous feeder 7.680 mm Width 3.210 mm Equipment feeder: continuous feeder 1st folding unit: 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts 2nd folding unit: working width max. 68 cm 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts peripheral units and deliveries belt delivery

Condition: good (used), Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment • flat pile feeder • counter PCS 100 1st folding unit • 4 buckle plates • Festa foldingrolleradjustment • pu steel folding rollers • noise prevention 2nd folding unit • attachable knife-folding unit • mobile knife-folding unit KB 36 peripheral units and deliveries Nsdpfjhf Aw Ujx Ahvewd • attachable belt delivery

Condition: good (used), Size: 1.300 x 1.650 mm Speed: 150 m/min Equipment: feeder: • pallet feeder (MABEG) • counter MCC 3 1st folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: Nwodpfx Ahedyk Rlsvod • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention 4th folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention

Condition: ready for operation (used), Size with flatpile feeder max 660 x 1040 mm Speed max 210 m/min Equipment feeder • flat pile feeder • Tremat 1st folding unit • 4 buckle plates • noise prevention 2nd folding unit • 4 buckle plates • noise prevention delivery • delivery SBP 46 Nodpjd Iq S Ujfx Ahvewd

Year of construction: 1997, condition: used, Built in 1997 Size with flatpile feeder max 520 x 840 mm min 100 x 150 mm Speed max 180 m/min Equipment: • flat pile feeder Nodpfx Ajdm U Dhehvowd • counter 1st folding unit: • 4 buckle plates 2nd folding unit: • 4 buckle plates peripheral units and deliveries: • belt delivery

Condition: ready for operation (used), Size max 560 x 920 mm min 150 x 180 mm Speed max 180 m/min Equipment feeder: • continuous feeder • MS control • counter Nedpfx Aed A Hcvshvswd 1st folding unit: • 4 buckle plates • noise prevention delivery: • belt delivery

Year of construction: 2002, condition: used, Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Equipment: feeder • pallet feeder (MBO) Nsdpfx Ahjddh Evevjwd • MC control 1st folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts • noise prevention delivery: • belt delivery

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Handle hole motor Faceplate motor Lubrication system Extraction connection D 80/100 mm Space requirements approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Storage location: at customer's site Sale as is, as inspected, without guarantee or warranty Nwjdpsyuty Sjfx Ahved

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, Hydraulic cylinder Nwjdpfx Ajydk D Hohvsd Brand: Casanova Bending length: 3,100 mm Maximum bending thickness: 25 mm Top roller diameter: 420 mm The side rollers are raised parallel, without inclination. New control and command panel, installed and modified in 2003. Equipped with hydraulic flag and hydraulic side table. Pit dimensions: - 200x6800 mm - 555 mm depth

Condition: used, Diameter: 630 mm Height: 170 mm Dividing head base on table: 690 mm Taper: Morse 5 / 65 mm Nwjdpfx Aew H Rmzjhved Admissible weight: 550 kg Dividing head weight: 302 kg

Condition: like new (used), machine/vehicle number: 22-01050762, functionality: fully functional, Used divider plate Nwedpfx Ahsr Epa Isvsd Brand: Meca-Divimek 160mm 3-jaw chuck It has a point. Brake torque: 30kg Servomotor: 2000 rpm Weight: 70kg Maximum load admitted horizontally: 150kg Vertical position at 200mm: 75kg (With counter-point: 150kg) Servo drive used Brand: Fagor Automation Model: ACS-10 S/N: 22-01050762

Condition: excellent (used), For sale: professional granite surface plate (marking-out plate) used in quality control and tool rooms. The plate is made of high-quality technical granite, ensuring excellent dimensional stability and wear resistance. Ideal for precise measurements, marking out, and component inspection. The unit is mounted on a robust steel stand. The equipment comes from an industrial facility. ⸻ Technical specifications • Type: surface plate / marking-out plate • Material: technical granite • Plate dimensions: approx. 1600 × 1000 mm • Thickness: approx. 200 mm • Weight: approx. 1014 kg • Base: steel construction The plate has a Trescal calibration sticker. Nwsdjyuqtpjpfx Ahvjd ⸻ Applications • quality control • tool rooms • CNC industry • precision measurements • marking out components

Condition: good (used), We offer you: 6 pallet units for DMC 80 U Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in technical data and details, as well as prior sale! Nodpfx Aheyvqfvsvjwd