Used Plate Maker for sale (13,188)

Condition: excellent (used), Year of construction: 2004, T-slot clamping plate with frame MÜHLENBAUER Type: ASP 2240 Year 2004 in very good condition . Plate : 2240 mm X 2240 mm X 80 mm Frame : 2000 mm X 2000 mm Total height : 320 mm T-slots for M24 T-slot nut Weight : 2300 KG Kfodpfx Ajq H Ectjffja

Condition: good (used), functionality: fully functional, Year of construction: 1996, Used 3-roll plate bending machine by BIKO / FACCIN Model: 3HCD 2018 Capacity: 2050 x 8 mm Kfodpfxex Dl Hue Affsa Top roll: ø 180 mm Equipped with swing-out bearing

Condition: used, functionality: fully functional, Mechanical guillotine shear Manufacturer: Kramer, type 2050 x 3mm Technical data Brand: Kramer Working length: 2050 mm Sheet thickness: 3 mm steel Dimensions: L 2.5 x W 1.4 (plus support arms) x H 1.25 m Weight: approx. 2 t Kfjdpfjx Dbqvox Affja Equipment - Manual back gauge 500 mm - Support arms All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: ready for operation (used), A high-performance crank plate shear with a low operating hours count is offered. Design: all-steel welded construction, stroke rate: 50 strokes/min, control FM 1S, backgauge manual or motorized (MAH 51/52), pneumatic hold-down device, rear safety light barrier. Inspection possible by arrangement. Kedpsx Hfgvefx Affofa

Condition: used, Plate Heat Exchanger,Heat Exchanger, SPX 034.MGS.10.1, Used machine Manufacturer : SPX Kfjdpfex Da Duox Affsa Year : 2012 Overall dimensions : 450 x 610 x 1360 mm Heat transfer area : 18.93 m² Operating pressure : 10 bar

Condition: good (used), Clamping plate with grooves, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping surface: 2995 x 2500 mm -Clamping plate: with grooves, no T-slots Kjdpjndzycofx Affefa -Height: 300 mm -Groove width: 10 mm -Groove spacing: 200 mm -Transport dimensions: 3100/2500/H300 mm -Weight: 5000 kg

Condition: good (used), Year of construction: 2010, Marble measuring plate Fabr.Fischer Type : MP 5100 Bj.ca.2010 In good condition. Dimensions : Length 5100 mm Width 1600 mm Height: 500 mm Weight.ca. 10 t. Ksdpfsnccycex Affsfa

Condition: ready for operation (used), Year of construction: 2005, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm work height max. 930 mm no. of strokes 9 - 17 Hub/min cutting angle 0.5 - 3.0 ° Kfedpex Avq Ijfx Affea down holder 18 Stück Control SC 100 T engine output 22.0 kW weight of the machine ca. 9500 kg range L-W-H 4270 x 2200 x 2250 mm Good/well-maintained condition (!!) Current new price approx. 80.000 euros Features: - Electro-hydraulic/sliding table shear - HACO CNC control model “SC 100 T” * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * LCD display * Emergency stop switch - NC electro-motorized backgauge, on ball screws - Hydraulically operated hold-down device - Front finger guard - Ball rollers in the support table * Support table with recessed handles - 1x side stop, with mm scale - 1x front support arms - 1x freely movable foot switch - Rear safety device - Operating instructions in German (PDF)

Year of construction: 2010, condition: used, Case maker Kolbus DA 270 Year: 2010 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: Kodsx Ary Eopfx Affofa - Automatic setting - Motorised setting - Automatic case counter - Board pre stacking conveyor: 1700 mm - Board cutter: PS - Centre strip infeed (flexible) - Waste chopper - Cloth feeder: Non-Stop - Glue unit - Preheated glue tube - Viscosity control - Device for inside lining with hotmelt - Device for producing padded cases - Pressing station - Stacking delivery Max. mechanical speed: up to 65 cycles/min Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20721 Specifications: Kodpfx Aswrl T Teffofa S70 mount, but a little wider For excavator Works as it should Weight: 645 kg 172 Bar Ready for delivery

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Zero Clamp Zero Point Clamping System Base Plate with 3 Clamping Plates For sale is a Zero Clamp zero point clamping system. The system was used only a few times after purchase and is therefore in very good condition. Scope of delivery: - 1x Base Unit TK200/4 (Original price: €4,423.00) - 1x Connection Block Komfort 5-A (Original price: €364.50) - 1x Zero Clamp Quick Coupler, Brand Garant 360019 10241 (Original price: €41.30) - 1x Cover Plate TK200/4 (Original price: €116.50) Ksdexqqh Djpfx Affjfa - 3x Plate TK200/4, each with 4 clamping studs M16 (Original price: €2,022.00) - Plus screws as shown in the pictures. Total original price: €6,967.30 net. Ideal for precise and rapid clamping in mechanical engineering / toolmaking. Price: €3,999.00 negotiable, net. No warranty or returns.

Condition: good (used), clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Surface: with grooves, without T-slots Kodpfx Afskm Rn Dsfofa -Length: 3000 mm -Width: 2500 mm -Height: 300 mm -Transport dimensions: 3000/2500/H300 mm -Weight: 5220 kg

Condition: good (used), Year of construction: 1990, overall weight: 1,200 kg, Faceplate, Werner Gigant, Type: PL 1600 - Cast Iron, Without Jaws Kodpfxowaidfe Affsfa Diameter 1600 mm with transport frame. Weight approx. 1200 kg. See photos for details. Good condition.

Condition: used, Year of construction: 2009, machine/vehicle number: 09102020, Lg. No. 25420 Manually operated 3-roll plate bending machine with asymmetric roll arrangement Technical data: - Max. working width: 1020 mm - Max. material thickness: 1.5 mm - Roll diameter: 64 mm - Top roll crowned, swing-out forward - Rear roll adjustable at an angle via handwheel for conical bending - Lower roll adjustment with lever and eccentric - Front roll parallel Kfedpfx Ajx Exr Asffoa - Required space: approx. W 1250 x H 950 x D 750 mm - Weight: approx. 200 kg

Condition: used, total length: 5,250 mm, total width: 1,400 mm, total height: 1,600 mm, Empty weight: 6.000 kg - Documentation available: No - CE certificate present: No - Serial number: 1011268 - Drive system: Conventional - Number of rolls [pcs.]: 4 - Power [kW]: 5.5 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3040 - Top roll diameter [mm]: 220 - Bottom roll diameter [mm]: 220 - Transport dimensions: 5250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Kedpfxow Elvhj Affjfa Lukas van Rossum

Condition: good (used), functionality: fully functional, Year of construction: 2012, control type: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 300 mm, roller (top) diameter: 330 mm, side roll diameter: 240 mm, roller length: 2,600 mm, working width: 2,600 mm, sheet thickness (max.): 20 mm, overall weight: 11,000 kg, power: 15 kW (20.39 HP), number of digital displays: 2, Equipment: cone bending device, documentation/manual, foot remote control, hardened rollers, swiveling upper roller, Technical Data AKYAPAK AHS 25/16 4-Roller Hydraulic Plate Rolling Machine Usable length: 2600 mm Kfedpfxjx Elzqe Affea Maximum capacity in steel, length 2600 mm / shell diameter 990 mm: Plate thickness: 16 mm Rolling: 20 mm Upper roll diameter: 330 mm Lower roll diameter: 300 mm Side roll diameter: 240 mm CENTRAL SUPPORT CONICAL ROLLING 2 speeds Power: 11 kW Hardened rolls Digital readout of plate thickness Dimensions: 5800 x 2300 x 4570 (height with stand) Weight: 11 tons

Condition: good (used), FASTI Plate Rolling Machine - Type 2040x2mm -GS-certified Kedjx Ec Nvopfx Affefa -Roller diameter: 105 mm -Max. sheet thickness over the entire length: 2 mm -Foot switch -Safety device Dimensions: LxWxH: 3x1.1x1.4 meters / Weight: 1,500 kg Errors and omissions excepted.

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 1570 x 150 Hydraulic side roller adjustment 3 digital displays Hydraulic drop-end Hardened rollers Device for conical bending Separate control panel Roll length: 1570 mm Top roller diameter: 150 mm Side roller diameter: 130 mm Total motor power: 4+3 kW Weight: 2,470 kg Dimensions (mm): 3350 x 1200 x 1210 (L x W x H) Kodsxrc Dtepfx Affofa Bending performance data 6 mm at minimum internal diameter (5 x top roller) 4 mm at minimum internal diameter (1.5 x top roller) Pre-bending performance data 4 mm at minimum internal diameter (5 x top roller) 3 mm at minimum internal diameter (1.5 x top roller) All bending capacities are calculated on the basis of 250 N/mm² yield strength Material (ST 37 - ST 42 structural steel)

Condition: used, total length: 545 mm, total width: 545 mm, drop-through hole in table: 90 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 Kfedpfevcywvsx Affsa No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request.

Condition: good (used), Year of construction: 2004, machine/vehicle number: 69839, Offer 25493 Technical Data: - Cutting length: 3050 mm - Cutting capacity at 400 N/mm² tensile strength: 13 mm - Cutting capacity at 400 N/mm² (up to 1000 mm length): 15 mm Kfsdpfx Aox D Uzzoffea - Cutting angle: 0.5 – 3 ° - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 – 23 min⁻¹ - Motorised back gauge up to: 1000 mm - Rear safety device with light barrier - Front squaring arm: 1000 mm - HSLX version: - CNC control with HACO SC 5 controller with input of sheet thickness in mm - Automatic adjustment of cutting angle according to sheet thickness - Cutting length limitation - Automatic positioning of back gauge (8 programs – 80 sets) with - Digital display and automatic back gauge retraction - Option for motorised adjustment of back gauge via 2 push-buttons - Drive: 400 V / 22 kW - Electric foot switch - Space requirement without support arms: approx. W 4200 x H 2250 x D 2200 mm - Weight: approx. 9000 kg

Condition: used, Price: On request Plate roller Sheet metal roller Model: Hydraulic Model: 4-Roller! Manufacturer: Chr. Haeusler (Switzerland) Type: VRM HY L4000x6 Working width: 4100mm Max. sheetthickness: 6mm (Inox) - 14mm (Alu) Upper-roller: 350 mm Other rollers: 250 mm Ksdpfx Afoww Iygofjfa Incl. conical bending Incl. hydraulic retraction-assist Machine-weight: 23000kg Video's available before dismantling. - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 900 mm, total width: 620 mm, drop-through hole in table: 250 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 Ksdjvcywiepfx Affjfa No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request.

Condition: used, total length: 800 mm, total width: 507 mm, drop-through hole in table: 155 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 Ksdpevcyxyefx Affjfa No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request.

Condition: used, total length: 600 mm, total width: 520 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Ksdpfevcyykox Affjfa Further information and prices are available on request.

Condition: used, total length: 780 mm, total width: 600 mm, drop-through hole in table: 120 mm, Used clamping plates in the following sizes are available for sale: No. 10 / 1100 x 700 mm / through hole 180 x 220 mm / T-slot 28 Kodpfx Aevcyx Tjffsfa No. 11 / 1200 x 600 mm / Fold-through hole 220 mm / T-slot 20 No. 12 / 910 x 620 mm / Fold-through hole 130 mm / T-slot 22 No. 13 / 900 x 620 mm / Fold-through hole 250 mm No. 14 / 545 x 545 mm / Fold-through hole 90 mm / T-slot 18 No. 15 / 800 x 507 mm / Fold-through hole 155 mm / T-slot 20 No. 16 / 780 x 600 mm / Fold-through hole 120 mm / T-slot 22 No. 17 / 600 x 520 mm Further information and prices are available on request.