Used Plate Heat Exchanger for sale (25,574)

Condition: used, machine/vehicle number: 16072, Fotodirekte Offset-Druckplattenkamera - Plate Exposer Heidelberg QUICKPLATER 40 Foliendicke / Foil thickness 0,1 - 0,2 mm Folienstanzfunktion (nur Langformat) / Foil Punch System (only lengthways format): Heidelberg Quickmaster 46, d. h. zwei U-förmige Löcher mit einem Abstand von 220 mm symmetrisch zur Mitte der Folienvorderkante Folienformate / Foil Size: Querformat / landscape format max. 404 x 510mm Langformat / Long Size: max. 350 x 510mm Querformat / landscape format min. 222 x 250mm Vorlagenformat / Template format max. Bei Verkleinerung auf / when reduced to 70,7 %: 440 x 614mm Bei Verkleinerung auf / when reduced to 64 %: 448 x 575mm Motivformat auf der Folie / Motiv format on Foil max.: 1:1 Querformat / landscape format: 350 x 505mm 1:1, gestanztes Langformat / punchd long size: 350 x 480mm 1:1, ungestanztes Langformat / not punch long size: 350 x 469mm 70,7 %, Lang/Querformat / Long/landscape format: 311 x 434mm 64 %, Lang/Querformat: Long/landscape format:287 x 370mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Bjdpfeh Axk Isx Aafelc Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1999, Druckplatten - Entwicklungsmaschine / Plate Processor AZ FEYear 1999 - Serial-No. XX158 Bljdpfsh Ax R Ujx Aafsc Working width max. 300mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, First registration: 23/05/1980, vehicle identification number: 10628, permitted gross weight: 40,000 kg; NOTE: The low loader’s registration documents are missing. A statutory declaration of loss by the owner, required for the application of new documents at the relevant road traffic authority, is available and will be handed over to the highest bidder or buyer of the low loader! Bljdsyf R Eaepfx Aafoc

Condition: good (used), Year of construction: 2004, overall weight: 6,000 kg, total height: 245 mm, total length: 5,990 mm, total width: 1,250 mm, Floorplate Length: 6000mm Floorplate Width: 1250mm Height: 245mm No. Of T-slots: 5 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Length: 5990mm Width: 1250mm Height: 245mm Weight: 6000kg Bsdpfx Aasxdltuofjlc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2016, gebraucht Bledpfx Ajwiq Iweafoc 2016 9737 prompt, Zwischenverkauf v 9800 € 1 8330 € 2025 mm 3 mm 500 mm 4 kW 2500 mm 1720 mm 1200 mm 1100 kg Manual back gauge 500 mm Foot pedal Side stop 4 table support arms Light barrier protection at the rear of the machine Stroke counter Sheet ejection to the front for small parts Operating manual in English with EC declaration of conformity

Condition: used, tank capacity: 1,000 l, 1000 liter electrically heated, insulated container made of V2A stainless steel Blsdpfxoyfwpxs Aafsc

Condition: used, functionality: fully functional, Year of construction: 1965, machine/vehicle number: Type: BT10x3000; Fab. Nr. MBO-559, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, overall weight: 11,500 kg, cutting length (max.): 3,000 mm, Guillotine shears, guillotine shears, VOEST BT 10 x 3000 Bjdpfx Asv Igipeafslc Year of manufacture 1965 Cutting thickness 10 mm Cutting length 3000 mm Power 25 HP Weight 11.5 tons Functional, on-site inspection and testing possible

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information Bodpfx Aaeyg Idijfjlc incl. 15 plates

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm Bledpfxjyg Htij Aafec - Including 6 plates measuring 5600 mm x 1850 mm

Condition: new, functionality: fully functional, 4-roll plate bending machine Operation: hydraulic Sheet thickness: 30 mm (1.2 in) Blsdpfxeyg Hcks Aafoc Sheet width: Max: 1,200 mm (47 in), Min: 500 mm (20 in) 2 side supports for large diameters

Condition: new, Electrically heated circulating air furnace (horizontal air flow) Bodjdt R Uujpfx Aafelc max. temperature: 550ᵒC useable dimensions (w x h x d): 900 x 1300 x 1800 mm charge weight: 800 kg gross heating power: 72 kW circulation fan: 1 x 7,5 kW

Condition: new, Gas heated tempering furnace type: KA_TRU_GB external dimensions (w x h x d): 1700 x 2050 x 3900 mm useable dimensions (w x h x d): 600 x 850 x 1800 mm temperature: max. 600°C circulation fan: 4,0 kW Blsdpecdixlefx Aafoc loading weight: 3.000 kg gross

Condition: new, temperature: max. 650°C heating power: 45 kW fan: 3,0 kW total connected load: approx. 52 kVA internal dimensions (l x w x h): 1.000 x 700 x 700 mm charge weight: max. 1,0 t Bjdpjgyn H Nofx Aafelc

Condition: new, Electrically heated circulating air furnace (horizontal air flow) max. temperature: 650ᵒC useable dimensions (w x h x d): 1000 x 1000 x 2000 mm Bjdpfx Aodhzimjafjlc heating power: 72 kW circulation fan: 1 x 4 kW

Condition: new, TECHNICAL DATA type: gas-heated drive-through chamber furnace Blodpfxjg Dgymj Aafoc internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm number of control areas: 2 Max. loading weight: approx. 2,5 t PLC: Siemens S7

Year of construction: 1998, condition: ready for operation (used), Immediately available from location: Hydraulic guillotine shear Hera Model TK 3000 / 10 Year of manufacture: 1998, only very few operating hours (as new) Motorised backgauge Backgauge controlled – 1000 mm Blodpeyg Eivsfx Aafec Machine control: Siemens Simatic CP 7 Cutting length: 3050 mm Material thickness up to 10 mm Drive: 15 kW Weight: 8 t Price: €9,500 plus VAT, ex-location

Year of construction: 1991, condition: ready for operation (used), Available immediately from location: Technoimpex hydraulic guillotine shear Bjdpfx Aajyg Eicsfjlc Type HS 5 / 2550 Year of manufacture 1991 Cutting length 2550 mm Material thickness 5 mm Digital backgauge 1000 mm Drive 5.5 kW Weight 4 tons Price: EUR 4,500 plus VAT, ex location

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 44.5 kW (60.50 HP), type of cooling: air, overall weight: 830 kg, total width: 1,150 mm, total length: 2,200 mm, total height: 1,500 mm, warranty duration: 6 months, heating capacity: 50.4 kW (68.52 HP), Aircooled chiller/Heat pump Climaveneta AWR HT D LN CA E 0152 44.5 kW/50.4 kW Cooling capacity: 44.5 kW / 12.65 tons (12/7 — 35°C) Heating capacity: 50.4 kW / 14.33 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump. Hydraulic module. Recuperation. Economizer Bledpfx Aovrwv Ijafec Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZH24KVE-TWD-526 (scroll) Type of refrigerant: R407c Number of fans: 6 pcs. Hydraulic module: 1 pcs. water pump EBARA DWC-V/I 300/1.1-Q1AEGG Dimensions: 2.2x1.15x1.5 m Weight: 830 kg Working hours: 0/0 h. Condition: New

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: 2014.6.2, We are offering our CNC machining center STEINHAUER eCAB WorkCenter, year of manufacture 2014, for sale. The machine is currently still in operation and will be replaced by a newer model as part of a new investment. The eCAB WorkCenter is specifically designed for metal and plastic processing in control cabinet construction. It is ideal for automated drilling, milling, and thread cutting of mounting plates, doors, side panels, and other enclosure components made of steel, stainless steel, aluminum, and plastic. The machine operates based on CAD data and is equipped with a powerful CNC controller and automatic tool changer. Location: Andritz AG Graz, Stattegger Strasse 18, 8045 Graz. Availability: from 02/2026. Technical details and pictures are attached. Bodpfxsyg D Rxs Aafslc

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 16,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,500 rpm, feed length W-axis: 800 mm, spindle diameter: 150 mm, table load: 25,000 kg, table length: 2,000 mm, table width: 2,500 mm, The machine is in good technical condition, connected to power and can be tested. CNC control system Siemens Sinumerik 840D. Tool magazine for 80 tools, HUI 50 angular head, rotary table S 25 measuring 2000 x 2500 mm, travel 1800 mm, clamping plates 4xUD 3220x2195 mm. Blsdpfx Aasyg Dfcjfoc

Condition: excellent (used), Automatic molding for plates and/or salad bowls with drying tank and complete with various accessories. Brand: JOB FORNI Bodpfxov Upkcj Aafslc

Condition: good (used), Year of construction: 1990, overall weight: 1,200 kg, Faceplate, Werner Gigant, Type: PL 1600 - Cast Iron, Without Jaws Diameter 1600 mm with transport frame. Weight approx. 1200 kg. Bsdpowaidfsfx Aafslc See photos for details. Good condition.

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Bledotqfhxspfx Aafsc Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, Hydraulic cylinder Brand: Casanova Bending length: 3,100 mm Maximum bending thickness: 25 mm Top roller diameter: 420 mm The side rollers are raised parallel, without inclination. New control and command panel, installed and modified in 2003. Equipped with hydraulic flag and hydraulic side table. Pit dimensions: Blsdpfjydk D Hox Aafoc - 200x6800 mm - 555 mm depth

Condition: used, functionality: fully functional, Year of construction: 1998, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 380 mm, side roll diameter: 340 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 900 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, overall weight: 15,000 kg, total length: 5,500 mm, total width: 1,500 mm, total height: 1,600 mm, power: 22 kW (29.91 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: centralized greasing system, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, Plate roll FW model HAV 3100X16-30 variable geometry 3-roll plate bending machine capacity 3000 x 30 mm Year of make 1998 Used machine in working condition Top roll 380 mm Side rolls 340 mm Rolls surface length 3100 mm Capacity bending Plate width 3000 mm Plate thickness 30 mm Prebend 16 mm minimum rolling diameter starting from ID 450 mm and above -configuration Blsdpfx Aoydiq Soafsc -machine fully hydraulic operated -variable geometry of the 3 rolls with pinch prebend -hardened surface of the 3 rolls Rerolling system for calibration of welded plates Front open drop-end to unload the closed shell -Side arm hydraulic swing-down to align the plate in the rolls -hydraulic driven rotation of the upper roll with braking system Control console centralized electric with digital position readout Electric motor power 22Kw installed on hydraulic unit Voltage 3 phase 380/50 Safety and emergency stop installed Manuals operation and service original the machine Machine weight 15ton overall dimension cm 550 x 150 x H160 cm