Used Plate Frame for sale (18,582)

Condition: used, tank capacity: 1,000 l, GENERAL Features: Ball valve Design: Container Notes: V2A frame; manhole diameter approx. 400 mm; occasional dents may be present in the containers; two different outlet connections are fitted (see photos) Overall width: 1,020 mm Overall height: 1,520 mm Overall length: 1,220 mm Location: Bremen Nameplate: Volume: 1,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: flavours / fragrances Rbedeyck R Dopfx Ahzot TANK Base type: Frame EQUIPMENT Manhole / Dome: in the top plate Discharge: 28 mm Comment: minor residues

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Equipment: Crane lugs Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Total height: 2,550 mm Rbodpfx Aeyckt Ejhzjt Total length: 3,200 mm Heating/Cooling: available Location: Bremen Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: feet Number of feet: 4 HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage Redjycktropfx Ahzsbt TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Condition: good (used), Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2280/1060/40 mm -Table height: 960 mm -with supporting ribs -Cast iron plate -Weight: 1050 kg Rodpfxeb A Nbne Ahzobt

Condition: good (used), Electric griddle with open base with 2 heating zones, each 4.2 kW operating temperature of each heating zone adjustable from 120 to 280°C (thermostatically controlled) cooking surface inclined 1.5° forward for grease drainage 1.5 mm thick stainless steel front and top panels, stainless steel side and back panels Scotch-Brite finish, rounded edges on all sides IPX4 - splash-proof standard with grease drip tray and 3-sided stainless steel splash guard with height-adjustable feet (+50 mm) Rbsdpfoxvy Hyox Ahzet External dimensions (W x D x H): 800 x 700 x 850 mm cooking surface dimensions (W x D): 730 x 540 mm cabinet dimensions (W x D x H): 680 x 640 x 420 mm Weight: 80 kg Find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2022, condition: used, The panel swivel fix facilitates handling when moving panels from a vertical to a horizontal position. The support frame is hydraulically height-adjustable and also pivots. Support rollers facilitate horizontal movement. Four swivel casters ensure safe movement. Technical data: Support height: • Vertical approx. 340-120 mm • Horizontal approx. 1200-890 mm Max. panel size: 5200 x 2100 mm Load capacity: 250 kg Rjdpfx Ahev T Ilvozsbt Storage location: Bad Wimpfen

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Rsdpfsvvkmbex Ahzobt

Condition: ready for operation (used), empty load weight: 19,000 kg, nominal power: 33.526 kW (45.58 HP), Boven- en onderrol worden aangedreven (planetaire tandwielkast) Conische buiging Automatische gelijktijdige balancering Onderste rol excentrische balk Rjdpjx Dd Hyefx Ahzebt Number of rolls: 4 rolls - 2 roll driven Roll capacity cold: 3100 x 32 mm Roll dia upside: 410 mm Dia under roll - side rolls: 370 - 300 mm

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 39400 € 628.39 € 32900 € 2050 mm 10 mm 10 mm 8 mm 10 mm 8 mm 8 mm 6 mm 200 mm 200 mm 180 mm Rsdeyb S Arspfx Ahzebt 6 m/min 3850 mm 1350 mm 1290 mm 3750 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT: overhead crane side supports NC control variable speed

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 34900 € 555.81 € 29100 € 2050 mm 8 mm 8 mm 6 mm 8 mm 6 mm 6 mm 4 mm 180 mm 180 mm 150 mm 5 m/min 3850 mm 1350 mm 1290 mm 3300 kg motorized roller drive upper and lower roller driven hydraulic side roll feed Rbodpfx Aeyb S Afehzet 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT: overhead crane side supports NC control variable speed

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 20000 € 318.72 € 16600 € 1270 mm 5 mm 5 mm 4 mm 5 mm 4 mm 4 mm 3 mm 130 mm 130 mm 130 mm 5 m/min 3020 mm 1150 mm 1110 mm 2150 kg motorized roller drive upper and lower roller driven hydraulic side roll feed Rbedpfoyb Sz Uox Ahzet 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT: overhead crane side supports NC control variable speed

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 55900 € 1056.51 € 3100 mm 9 mm 8 mm 7 mm 7 mm 5 mm 245 mm 245 mm 180 mm 1,5 / 6 m/min 7.5 kW 5350 mm 1600 mm 1470 mm 6850 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended Rjdpfxoyb Sz Ie Ahzobt

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 46300 € 884.33 € 2050 mm 11 mm 11 mm 9 mm 9 mm 7 mm 220 mm 220 mm 160 mm 1,5 / 6 m/min 5.5 kW 4400 mm 1150 mm 1250 mm 4080 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Rbjdoyb Szuepfx Ahzjt Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, Year of construction: 2024, neu 2024 9729 prompt, Zwischenverkauf v Türkei 28450 € 488.96 € 1 Rbjdpfx Ajyb Szhohzjt 25600 € 1550 mm 7 mm 7 mm 4.5 mm 4.5 mm 3.5 mm 150 mm 150 mm 130 mm 1,5 / 6 m/min 4 kW 3750 mm 960 mm 1100 mm 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu Rsdpfjyb Szbsx Ahzjbt ca. 10 Wochen ab Auftrags Türkei 31600 € 603.56 € 2050 mm 6 mm 6 mm 4 mm 4 mm 3 mm 150 mm 150 mm 130 mm 1,5 / 6 m/min 4 kW 4250 mm 960 mm 1100 mm 2800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 57000 € 1077.3 € 2550 mm 13 mm 13 mm 10 mm 10 mm 8 mm 260 mm 260 mm 200 mm 1,5 / 6 m/min 7.5 kW 4800 mm 1600 mm 1550 mm 6800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support Rodpfxoyb Sy Rj Ahzsbt NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 26300 € 502.33 € 2050 mm 4 mm 4 mm 3 mm 3 mm 2 mm 130 mm 130 mm 130 mm 5 m/min 2,2 + 1,1 kW 3800 mm 1150 mm 1110 mm 2450 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH Rbodpfx Ahoyb Sy Dezjt OPTIONAL EQUIPMENT: overhead crane side supports NC control variable speed

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 48100 € 918.71 € 2550 mm 9 mm 9 mm 7 mm 7 mm 5 mm 220 mm 220 mm 160 mm 1,5 / 6 m/min 5.5 kW 4900 mm 1150 mm 1250 mm 4600 kg Rodjyb Sywopfx Ahzjbt 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 25200 € 481.32 € 1050 mm 2.5 mm 2.5 mm 2 mm 90 mm 4,5 m/min 2.2 kW 2250 mm 1000 mm 1500 mm 900 kg FOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE) 4 rolls Rsdpfjyb Syqsx Ahzebt NC control with touchscreen Top roll driven by hydromotor and plantary gearbox Hydraulic drop end Mobile control panel Hardened rolls Operating manual in English or German OPTION: Feeding table price on request

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 52700 € 996.03 € 2550 mm 10 mm 10 mm 8 mm 8 mm 6 mm 245 mm 245 mm 180 mm 1,5 / 6 m/min 7.5 kW 4800 mm 1600 mm 1470 mm 6170 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Rjdpfsyb Sykox Ahzsbt Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 49900 € 953.09 € 2050 mm 13 mm 13 mm 10 mm 10 mm 8 mm 245 mm 245 mm 180 mm 1,5 / 6 m/min 7.5 kW 4300 mm 1600 mm 1470 mm 5450 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Rsdpfxeyb Sydj Ahzobt Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, functionality: fully functional, Year of construction: 2025, Capacity: 1040 x 3 mm. Capacity with prebending: 1040 x 2 mm. Upper roll: 90 mm. Lower roll: 90 mm. Rjdpjyfcr Eefx Ahzebt Working speed: 0-6 m./min. Year: 2025 Country of origin: Sweden. Size (L x W x H): 1700 x 580 x 990 mm. Weight: 460 Kg. Asymmetric. With stepless speed, hardened rolls, and conebending device. As new, has only been used for display.

Condition: used, Year of construction: 2009, Technical details: sheet width: 3000 mm plate thickness: 6 mm stroke: 102 mm back gauge: 1000 mm Rbodpfoybbz Djx Ahzst total power requirement: 11 kW dimensions of the machine ca.: 3900x1950x1700 mm weight of the machine ca.: 5650 kg

Condition: excellent (used), Technical data for the locking bracket: Manufacturer: SSI Schäfer Scope of delivery includes: 01x Locking bracket, used Material color: Sendzimir galvanized Leg "A": approx. 35 mm Leg "B": approx. 53 mm (support surface, see description) Incl. spacer block (grey) Internal dimension "C": approx. 22 mm Material thickness: approx. 2.00 mm Weight per piece: approx. 0.120 kg Note: Thanks to the included spacer block, the Z-bracket can be used for various beam widths from 40 to 60 mm! Quick overview / Application area: - Without block for beam width 60 mm (e.g., for INP) - With block (small side inside) for beam width: 50 mm (INP or box profile) - With block (large side inside) for beam width: 40 mm (INP or box profile) Rsdpfepgndgox Ahzebt General information about the item: This item is available for pickup only. Additional shipping or transport services are subject to extra charges, which can be provided upon request depending on the delivery location and quantity.

Condition: ready for operation (used), functionality: fully functional, For sale: Complete production line for aluminium frames & insect screens Ideal for window manufacturers, craft businesses & producers Available for sale is a fully coordinated set of machinery and workshop equipment for the production of: - Aluminium frames for timber-aluminium windows - Renovation aluminium frames - Fixed insect screen frames The equipment is suitable both for existing companies looking to increase their manufacturing depth as well as for start-ups or newcomers wanting to take over a ready-to-use production line immediately. Special features: - Preferred sale as a complete package - Partial sale of individual machines possible - Field-proven, functionally matched machines - Independent in-house production possible - Significant cost savings compared to purchasing new equipment Instruction, training & knowledge transfer: Upon request, I offer buyers personal instruction and job training. The goal is to pass on the specialist knowledge built up over decades. The training can include: - Introduction to the complete production process - Optimal machine settings - Cost-effective production - Avoidance of common mistakes - Assistance with commissioning Benefits for the buyer: - Immediate start of production - Reduced dependence on suppliers - Expansion of offering portfolio - High value creation - Know-how transfer included Reason for sale: The sale is due to age and a change of profession. Rbjdex Nbnhopfx Ahzjt Further information: - List of machines and details available on request - Scope of training negotiable - Collection by arrangement If interested, please get in touch. Open to all options and arrangements. Double mitre saw Elumatec DG 79: Comes with blades for aluminium cutting. Year of construction 1996. Cutting length 4.5m. Digital length display. Overhauled in 2024 for 6,500. New feed units, belts and bearings. Fully operational. Set up and ready for demonstration. Machine available due to business closure at the end of March. Sale with invoice. VAT can be shown separately. Cut-off and mitre saw Graule ZS 170N: With 420 mm saw blades for aluminium cutting. Fully equipped. Year of construction 2004. Saw height 170 mm. Left roller track 6 m with manual stop. Right roller track 5.2 m with digitally adjustable stop from the saw stand, adjustable and swivelling! Pneumatic material clamping and mist spray unit. The machine can be tilted on both sides via handwheel. Compound cuts no problem! Digital electronic angle display for both axes. Laser guide on saw blade. Cross fence for acute angle cuts. With machine stand. Please note: The blue tool drawer cabinet and wall-mounted extraction system are not included in the offer. Set up and ready for demonstration. Machine available due to business closure at the end of March. Sale with invoice. VAT can be shown separately. Notching mill Graule AKF1: With 8 mm high-performance cutter for aluminium. I have used this machine to notch aluminium profiles. It also works equally well on wood or plastic profiles. With machine stand made of aluminium profile system. Manual workpiece clamping. Set up and ready for demonstration. Machine available due to business closure at the end of March.