Used Plate Bending Machine for sale (70,296)

Condition: new, - Capacity 1270 x 2.5 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - Conical rolling option Blsdpfx Abswfn E Eobjc - Pivoting top roller - Brake motor - Foot pedal control - Emergency stop - Documentation - 400V

Condition: new, functionality: fully functional, Year of construction: 2025, Capacity: 1040 x 3 mm. Capacity with prebending: 1040 x 2 mm. Upper roll: 90 mm. Bedpfx Aboyfcr Eebslc Lower roll: 90 mm. Working speed: 0-6 m./min. Year: 2025 Country of origin: Sweden. Size (L x W x H): 1700 x 580 x 990 mm. Weight: 460 Kg. Asymmetric. With stepless speed, hardened rolls, and conebending device. As new, has only been used for display.

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 Bsdpfjya Iaqex Abbjlc - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Weight: 17,000 kg Good condition

Condition: like new (used), functionality: fully functional, Year of construction: 2013, For sale is an as-new 3-roll bending machine (year of manufacture 2013) with the following specifications: Working area: Working length: 3100 mm Sheet thickness (max.): 4 mm Max. sheet thickness for pre-bending: 3 mm Min. bending diameter: 255 mm Roller diameter: 170 mm Drive performance: Motor power: 4 kW Dimensions and weights: Bodpoydn T Ssfx Abbolc Dimensions: 4650x820x1130 mm Weight: 3200 kg For cone bending, all bending values must be reduced by 50%!

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB Bedpfx Aettah Robbjlc → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW Bljdstr U Hlepfx Abbjc → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, Equipment: documentation/manual, Ercolina ECO 50 V1T is a professional and reliable pipe and profile bending machine. Compact, durable, and easy to operate, it is designed for precise bending of steel, stainless steel, aluminum tubes, as well as square and rectangular profiles. This unit is used but in good working condition, fully tested and ready for operation. CP182A-X2 (outlined in red) Machine control panel with pedal and programmable board - ordered new from supplier in Lithuania CP4024A (outlined in green )Machine tool side supports, to guide the workpiece, to roll the spiral. Left and right sides, complete set - ordered new from supplier in Lithuania. ⚙️ Technical Specifications* Model: Ercolina ECO 50 V1T Max. pipe diameter (steel): up to Ø 50 mm Bjdpfx Abexdnx Hjbjlc Max. square profile: up to 40 × 40 × 3 mm Max. round hollow profile: up to Ø 48 × 3 mm Minimum bending radius: from ~80 mm (depending on tooling) Bending angle: up to 190° (programmable) Control: electronic (V1T version – with digital angle setting and memory) Motor power: approx. 1.5 – 2.2 kW Power supply: 400 V, 3-phase Dimensions: ~1100 × 600 × 1200 mm Weight: approx. 250 – 300 kg ✅ Key Features High-quality Italian brand ERCOLINA. Bending up to 190° with programmable radius. Compact and robust construction. Electronic angle setting with memory for fast and accurate production. Suitable for both one-off jobs and serial production. Used but tested and in good working condition. 🎯 Applications Pipe and profile production Railings, furniture, and metal structures Metalworking workshops Small and medium industrial companies

Condition: new, Year of construction: 2025, New machine immediately available Capacity: 1520 x 2.25 mm segment-split upper cheek rail -tool rest Bjdjh S Uirepfx Abbolc -Adjustment of the upper beam by hand lever left/right

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request Blsdofifbbjpfx Abboc

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Delivery of the upper beam by hand lever left + right Slanted segments in the upper beam Continuous bending and lower beam rails RAL 7016 paint Bledpfxefifa Ao Abbec Manufacturing EU immediately available ex works Freight costs on request

Condition: new, - Shaft diameter 50 mm - Top roller is moved hydraulically - Digital display - Can be used horizontally/vertically - Foot control Blodpfxsr Ar Hvo Abbsc - Emergency stop - Documentation - 400 V

Condition: new, Year of construction: 2025, – Capacity 36 mm Bljdpfsydhl Isx Abbec – Automatic and manual mode – 3 programmable bending movements – Foot pedal operation – Hardened bending tools – Emergency stop – Documentation – 400V

Condition: new, pressure 20 t stroke max. 200 mm bending capacity max. - flat 200 x 10 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 2,2 kW weight of the machine ca. 640 kg required space 600 x 1100 x 1220 mm The Gerd Wolff HP 20 is a hydraulic horizontal press machine with many many possible combinations. Blsdpfotq Du Rex Abboc Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 20 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 20 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye.

Condition: new, angle steel/side length / mm double T-iron on the x-axis / mm U-iron on the x-axis / mm total power requirement / kW weight of the machine ca. 1000 kg required space 1200 850 x 1200 mm The Gerd Wolff HPK-80 is a hydraulic profile and tube bending machine with 3 rollers. The machine is ideal for bending profiles, tubes and similar material. Model: HPK 65 Upper shaft diameter: Ø 60 mm Bottom shaft diameter: Ø 50 mm Roll diameter: Ø 180 mm Working speed: 6 m/min Motor power: 3.75 kW / 380 V Dimensions (L x W x H): 1200 x 850 x 1200 mm Weight: 1000 kg Standard Accessories: Steel construction welded frame 3 rolls are powered Hardened and ground shafts made of high tensile special steel Horizontal and vertical working position Blodpfow Nbmpsx Abboc Hardened standard rolls Mobile control panel 3-axis mechanical lateral angle guide rolls Brake motor equipped for precision bending Digital read-outs (2 pcs) Optional Equipment: NC control Hydraulic lateral guide rollers (2-axis) Spiral bending crane Special profile rolls

Condition: new, pressure 40 t stroke max. 300 mm bending capacity max. - flat 250 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 250 mm total power requirement 4 kW weight of the machine ca. 1190 kg required space 650 x 1250 x 1300 mm The Gerd Wolff HP 40 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 40 is a multifunctional machine among the presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins Bljdpfx Ajuddfbebboc - hydraulic speed regulation The HP 40 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: new, pressure 10 t stroke max. 200 mm bending capacity max. - flat 150 x 6 mm working feed 10 mm/sec Control NC Height of Toolings 150 mm total power requirement 1,1 kW weight of the machine ca. 400 kg required space 500 x 900 x 1150 mm The Gerd Wolff HP 10 is a hydraulic horizontal press machine with many many possible combinations. Whether it's bending tubes, punching profiles or cutting sheet metal, with the right accessories the HP 10 is a multifunctional machine among presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 10 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine. Bedpfjuddi Hsx Abbslc

Condition: new, pressure 60 t stroke max. 300 mm bending capacity max. - flat 300 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 300 mm total power requirement 5,5 kW weight of the machine ca. 1530 kg The Gerd Wolff HP 60 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 60 is a multifunctional machine among all presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation Bjdpfx Aexfb Ikjbbjlc The HP 60 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Bsdpfx Abouddcasbolc Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: used, Year of construction: 2006, travel distance X-axis: 8,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,500 rpm, spindle diameter: 180 mm, table load: 80,000 kg, table length: 8,000 mm, table width: 4,000 mm, With Heidenhain 530, ATC 30 Bjdpfsydfxfex Abbolc

Condition: used, functionality: fully functional, control type: manual, degree of automation: semi-automatic, actuation type: electric, Equipment: electrical contact length stop, emergency stop, foot remote control, Rebar bending machine Peddinghaus Spezial 55. Completely overhauled machine with tooling. Bledpfx Abeydfwuobjc

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schechtl. Device features: - Guillotine shear MSB 200 Bedpfx Ajwfzztobbjlc - Cutting capacity as per nameplate: up to 3 mm steel; significantly higher for aluminium - Working length: just over 2 m - Manual backgauge: 750 mm - Side/angle stop - Foot pedal operation - Weight approx. 1.3 t - Schechtl MSB 200 - Bending length: just over 2 m - Sheet thickness for steel: 3 mm - significantly higher for aluminium and zinc - The machine has been used extremely rarely, approximately 1–2 times a month for thin sheets by a lamp manufacturer - Hardly any signs of wear – this condition is rare - The total price is less than half of the current price – the price list shown is from last year! - If you have any questions, please feel free to call briefly - We have this set twice, as well as other models like the Schechtl MAX 200 – 2.5 mm or MA 200 – 2 mm - Current net list price for both machines – see pictures - You will receive an invoice with VAT shown separately - Shipping by forwarding agent can be arranged if desired, forklift available Free loading, as shown in the pictures Inspection and testing possible by telephone appointment Payment in cash on collection – if there is anything else I can do for you, please give me a quick call – thank you Collection should take place within 8 days after the end of the auction. Article number

Condition: used, functionality: fully functional, Year of construction: 2014, machine/vehicle number: 401/453, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Biegemaster, working width: 6,200 mm, overall weight: 3,800 kg, total length: 7,400 mm, total width: 1,800 mm, total height: 1,500 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2025, Equipment: angle stop, emergency stop, foot remote control, We offer this used BIEGEMASTER BM 6.1,50 folding machine with CNC-controlled backgauge, year of manufacture 2014. The machine is equipped with an automatic cutting system. It has been serviced annually and maintained by Biegemaster. The machine will be available from the end of April. If you have any questions or need more information, please send us a message or give us a call. Bedoyc Uq Uopfx Abbolc

Condition: ready for operation (used), total length: 5,500 mm, total width: 1,400 mm, total height: 1,000 mm, empty load weight: 600 kg, Buisbuigmachine voor buis: dia 6 48 mm voor volledig materiaal: max 30 mm met gereedschap voor buisdiameter 21,3 / 26,9 / 33,7 / 42,4 / 48,3 mm Bledpfx Aoxcqi Ejbboc Max dia tube x thickness: Ø 6 > 48 mm (45 kg / mm²) Max bendingradius: 180°

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Bsdpfxjfbt Hus Abbelc Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Bljdpohmmfkjfx Abboc Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition